Supply Of Cutting Tool-Single Point , Cutting Tool-Single Point Parting Off, Carbide Tipped, Grade-P ( Iso-7 ) Spec: Aa6260745 Rev: 03 Dimensins: To Conform To Is:13742 ( Pt.7 ) -1993 ( Reaffirmed 1998 ) . Material, Workmanship, Finish, Packing , hardwar-Uttarakhand

Supply Of Cutting Tool-Single Point , Cutting Tool-Single Point Parting Off, Carbide Tipped, Grade-P ( Iso-7 ) Spec: Aa6260745 Rev: 03 Dimensins: To Conform To Is:13742 ( Pt.7 ) -1993 ( Reaffirmed 1998 ) . Material, Workmanship, Finish, Packing Etc: To Conform To Is:13740. Size: 12X8x100lh P30 Tip-D-3 Dim.: Sectionxl Mm , Cutting Tool-Single Point Parting Off, Carbide Tipped, Grade-P ( Iso-7 ) Spec: Aa6260745 Rev: 03 Dimensins: To Conform To Is:13742 ( Pt.7 ) -1993 ( Reaffirmed 1998 ) . Material, Workmanship, Finish, Packing Etc: To Conform To Is:13740. Size: 16X10x110rh P30 Tip-D-4 Dim.: Sectionxl Mm , Single Point, External Therading, Tool, Cardide Tipped, Grade P-, Ind 2 ( 60 Degree ) Spec: Aa6262045 Rev: 04 Dimensions And Tolerances: For Tools- To Conform To Is:13743, Part2 For Tipsto Conform To Is:2162. Workmanship And Finish: The Brazing Of The Tip Shallbe Sound. The Tool Shall Besupplied Well Finished Withthe Cutting Edges Lapped Andrelief Angles Ground And Readyfor Use. Size: 16X25x140rh-P30 Tip-E-10 Dim.: Sectionxl Mm Grade: Carbon Steel , Single Point, External Threading Tool, Carbide Tipped, Grade- K, Ind 2 ( 60 Degree ) Spec: Aa6262047 Rev: 04 Dimensions And Tolerances: For Tools: To Conform To Is:13743, Part-2 For Tips:To Conform To Is:2162 Workmanship And Finish: The Brazing Of The Tip Shallbe Sound. The Tool Shall Besupplied Well Finished Withthe Cutting Edges Lapped Andrelief Angles Ground And Readyfor Use. Size: 12X20x125rh-K20 Tip-E-8 Dim.: Sectionxl M Grade: Carbon Steel , Cutting Tool-Single Point Parting Off, Carbide Tipped, Grade-P ( Iso-7 ) Spec: Aa6260745 Rev: 03 Dimensins: To Conform To Is:13742 ( Pt.7 ) -1993 ( Reaffirmed 1998 ) . Material, Workmanship, Finish, Packing Etc: To Conform To Is:13740. Size: 25X16x140rh P40 Tip-D-6 Dim.: Sectionxl Mm , Single Point Turning Tools Boring Tool Iso-8, Carbide Tiped Grade-K-20. Spec: Hw6260847 Rev: 00 The Material, Dimensions Of Tip, Shank & Other Requirements Like Workmanship, Protective Coating And Packing Etc. Shall Be As Stipulated In Is:1342 ( Pt.8 ) Sampling & Criteria For Acceptance: As Per Is:7778 Material: The Rear End Of Shankand 25Mm Length From This End Shall Be Painted With Red Colour ( Is:5-62 Colour No.567 ) The Left Hand Side Of The Rearend Of The Rear End Of The Shank. Each Tool Shall Have Legibily Marked Upon It. The Manufacturers Name Of Trade Mark. Size: 16X16x210 Rh, K20 Tip-A-10 Dim.: Sectionxl Mm

Refer document

Refer document

INR 2 Lakhs /-