Welcome Maintenance, Periodical Services Including Misc Br Repair To Certain Omqs And Smqs And Roof Treatment, Chajja Repair, Repair / Replacement Of Internal Wiring And Other Allied Works And Cam Painting To Certain Bldgs In Domestic And Technic
Tender Value
45 Lakhs
Estimated cost
Bid Submission
04 Aug 2022
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
salua → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Welcome Maintenance, Periodical Services Including Misc Br Repair To Certain Omqs And Smqs And Roof Treatment, Chajja Repair, Repair / Replacement Of Internal Wiring And Other Allied Works And Cam Painting To Certain Bldgs In Domestic And Technic
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etcby brooming down or steel wire brushing and sand paper, scrapping down smokesoot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and makinggood with putty as per existing thickness and applying one coat of white washing on the wall all as specified and directed |
| 2 | All as per item No : 01above but for ceiling surfaces complete all as specified |
| 3 | M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etcby brooming down or steel wire brushing/sand paper, scrapping down smokesoot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and makinggood with putty as per existing thicknessand applying one coat acrylic distemper on old surfaces complete all as specifiedMake;Berger (Bison)/J&N(Jensolin)/Asain Piants(Tractor)/Nerolac(Beauty) |
| 4 | All as per item No : 04 here in beforebut on ceiling surfaces omplete all as specifiedMake;Berger (Bison)/J&N(Jensolin)/Asain Piants(Tractor)/Nerolac(Beauty) |
| 5 | M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etcby brooming down or steel wire brushing/sand paper, scrapping down smokesoot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and makinggood with putty as per existing thicknessand applying two coat acrylic distemper on old surfaces complete all as specifiedMake;Berger (Bison)/J&N(Jensolin)/Asain Piants(Tractor)/Nerolac(Beauty) |
| 6 | M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etcby brooming down or steel wire brushing/sand paper, scrapping down smokesoot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and makinggood with putty as per existing thicknessand applying onecement base painton old surfaces complete all as specified |
| 7 | M&L for preparation of old painted surfaces of Steelsurface of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel painting complete all as specified and as directed. |
| 8 | M&L for preparation of old painted surfaces of Steelsurface of any description, not otherwise described not exc 10 cm width or girth and applying one coat of synthetic enamel painting complete all as specified and as directed. |
| 9 | M&L for preparation of old painted surfaces of wood base surface of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel painting complete all as specified and as directed. |
| 10 | M&L for preparation of old painted surfaces of wood base surface of any description, not otherwise described not exceeding 10 cm width or girth and applying one coat of synthetic enamel painting complete all as specified and as directed. |
| 11 | M&L for preparation of old painted surfaces of wood base surface of any description, not otherwise described not exceeding 10 cm width or girth and applying two coat of synthetic enamel painting complete all as specified and as directed. |
| 12 | Materials and Labour for for complete removal of existing treatment by mean mechincal machine as permanufacturer instuction,s applyingtwo coats of interior emulsion paint silk glamor brand or equivalentany shade and colour to old plastered surfaces on walls, over and including 1mm thick wall care putty premium quality over primingpaint as manufacturer,s intruction and including preparation of surfaces, complete all as specified and directed.Make Berger(Silk luxury)/J&N Special effect Insta colour/Asain(Royale)/Nerolac(Impressions) |
| 13 | Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etcat any height including necessarry scalfolding and safety measures complete all as directed. |
| 14 | M&L for rendering 10 mm thick in CM 1:6 onfair face of brick work surfaces finished even and smooth without using extra cementcomplete all as specified and as directed. |
| 15 | Materials and Labour for rendering 5mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately) |
| 16 | Supply only Liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed (Make : CICO No- 1/SIKA/ACCO PROOF). |
| 17 | M&L for rendering 5 mm thick in CM 1:3 on fair face of concrete surfaces as in ceiling, chajja, shelves etc. finished even and smooth without using extra cementcomplete all as specified and as directed. |
| 18 | Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed |
| 19 | M & L for mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height. Complete all as specified and as directed. |
| 20 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilliate demolition complete all as specified and directed. |
| 21 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for including taking out of old damaged unserviceable tarfelt or membrane of any description and removing of debris from premises and cleaning roof surfaces by brushing etc and washing down with water and removing dirt, dust etc complete to receive roof treatment all as specified and as directed. |
| 22 | Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand (1:1), by weight complete all as specified and as directed. |
| 23 | M&L for 40 mm thick (Average) cement concrete type B-I, 1:2:4 using 20 mmgraded aggregatewith WPC as per manufacturer,s instruction as in roof padding in order to maintain proper slope and camber finished the surface even and smooth with and includingbrushing in two layersusing water proofing layer of damp proof ultra of make Asainor any other similar material of any approved make (Fosroc/Sika/BASAF) to give a layer of not less than 1.50 mm thick on newly concrete surface complete all as specified and as directed.Note:(i)The period of guarantee for the roof treatmentshall be 8(Eight) years from the certified date of completion and Condition 46 of the GCC(IAFW-2249) shall be deemed to be amended to the extent mentioned above.(ii) Leak proof test shall be carried out by ponding with water for 72 hrs as directed by EIC |
| 24 | Materials and Labour for waterproofing treatment to existing RCC roof in the following steps complete all as specified and directed.(i) Complete removal of the existing water proofing treatment and removing of debris from premises and cleaning roof surfaces by brushing etc and washing down with water and removing dirt, dust etc complete(ii)Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered (area of flashings, etc., shall be added to the roof area)(iiii) Supply and Laying, chicken wire mesh of size 12.5 mm x 0.51 mm (24 SWG) hexagonal construction including all laps, cutting and waste in fabric reinforcement to PCC roof padding including providing 40 mm thick plain cement concrete (1:2:4) type B0using 12.5 mm graded aggregates as in roof padding.(iv) Providing 15 mm thick screed bed or bedding layer of cement mortar (1:3), mixed with liquid water proofing compound as per manufactures instructions, on concrete surface of roofs or terracing and finishing surface even and smooth without using extra cement.(iv) Waterproofing treatment over smooth finished surfaces after application of cold applied bituminous primer @ 0.30 Kg /Sq M,, providing and laying APP polymer, modified, non-woven polyester fabric of 150 grams/square metre, reinforced membrane, 3.00 mm thick, weighing 3.50 Kg / Sq M, with surface finish of white mineral, by torch on application method, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction and finally applying with one coat of bituminous based solar reflective aluminium paint @ 100 gms / Sq M or as per manufacturer,s instructions complete all as specified and directed. |
| 25 | M & L for cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, slab staging for water tanks and the like including weathering, slightly rounded or chamfered angles and throating including necessary formworks complete all as specified and directed by Engineer- in-charge. |
| 26 | M & L for formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished flat surfaces of concrete complete all as specified and as directed. |
| 27 | Materials and Labour for reinforced cement concreteM-20 nominal mix in chajjas,complete all as specified and directed. |
| 28 | M&L for disconnecting existing tank setting aside for repairs, cleaning and removing all scales, dirt etc from tanks and mouth of circulating pipes and hoisting, reconnecting and refixing in position capacity exc. 250 and not exc. 500 ltrs complete all as specified & as directed. |
| 29 | M&L for disconnecting existing tank setting aside for repairs, cleaning and removing all scales, dirt etc from tanks and mouth of circulating pipes and hoisting, reconnecting and refixing in position capacity exc.500 and not exc. 1000 ltrs complete all as specified & as directed. |
| 30 | Material and Labour for complete removal of existing treatment by means mechnical process / Machine as directed by manfucaturer through authorised applicator of manufacturer,s and applying two coat of100 % Acrylic Exterior Emulsionpaintin camouflage pattern (Three colours) (Berger,Weather coat Advanced XP Brand/Asain Paints :Apex ultima Brand /ICI:Dulux Weather shieldMaxBrand/J&N:Safeguard Optima Brand painting over and including a coat of primerto old plastered or unplastered surfaces on walls including preparation of surfaces, up to 18Mtr height including all necessary scaffolding and safety measures complete all as specified and directed |
| 31 | All as Item Noas above here in before but on roof surface of AC sheets complete all as specified and directed.Note (Work shall be exectuted through authorised applicator and shall beget approved by GE before commencement of work) |
| 32 | Material and Labour for preparartion of new plastered surfaces of wallby means mechnical process / Machine as directed by manfucaturer through authorised applicator of manufacturer,s and applying two coat of 100 % Acrylic Exterior Emulsionpaintin camouflage pattern (Three colours as approved) (Berger,Weather coat Advanced XP Brand/Asain Paints :Apex ultima Brand /ICI:Dulux Weather shieldMaxBrand/J&N:Safeguard Optima Brand painting over and including a coat of primer , up to 10Mtr height including all necessary scaffolding complete all as specified and directed |
| 33 | M & L for cutting out old unserviceable steel hinges for ventilator/windowand supply and fixing steel hinges shutter suitable for top hung shutter by welding and functioning smooth by greasing etc incl. two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and as directed. |
| 34 | M & L for cutting out old unserviceable steel hinges from old steel windows in position and provision of new steel hinges on side welded (Spot) to face of the shutter made with electro galvanized, pin projecting type not less than 65 mm and not more than 75 mm wide and other side is welded to steel frame of suitable thickness and functioning smooth by greasing etc and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 35 | Preparation of newly plastered surfaces on ceilings and applying three coats of white wash complete all as specified and as directed. |
| 36 | Preparation of newly plastered surfaces on walls and applying three coats of white wash complete all as specified and as directed. |
| 37 | M&L for Preparation new or undecorated surface of walls and applyingtwo coats of cement base paint over a coat of alkali resistant primer complete all as specifed and as directed. |
| 38 | M&L Preparation of newly plastered surfaces of ceiling, chajja, soffitsand applying two coats of cement based paint over a coat of primer on new surfaces of ceiling,chajja,soffits completeall as specified anddirected. |
| 39 | M&L for complete removal of existing treatment from walls, and applying two coats acrylic distemper on walls,over and includinga coat of 3 mm thick white wall care putty premiumquality over and including a coat of primerold plastered or unplastered surfaces on walls plastered or unplastered surfaces on walls complete all as specified and as directed.Make;Berger (Bison)/J&N(Jensolin)/Asain Piants(Tractor) /Nerolac(Beauty) |
| 40 | M&L forpreparation of newly plastered surfaces of walls, and applying two coats acrylic distemper on wall,over and including witha coat of 3 mm thick white wall care putty premiumquality over and including a coat of primernew plastered or unplastered surfaces on wall, complete all as specified and as directed.Make;Berger (Bison)/J&N(Jensolin)/Asain Piants(Tractor)/Nerolac(Beauty) |
| 41 | Cleaning of PVC water tanks of capacity exceeding 300 litres but not exceeding 500 litres including chemical treatment with Anti-bacterial agent consisting of following process: -Dewatering the tank with submersible pump, de-silting and removing of left over dirty water up to 100 to 150 mm in the bottom of the tank and sludge with special sludge pump, cleaning of walls and ceiling with special mechanized high pressure jet machines by rotary jet system at 100-120 Bar pressure (120 Kg /sq cm) which dislodges the layer of dirt, algae, fungus stuck on its surface usage of scrubbing machines for old stains and cleaning chemicals if required of make Eureka Forbes Ltd, floor of the dirty tank should be thoroughly cleaned up by fry jet cleaner to accumulate all dirt ,the remaining sludge should than be removed by sludge pumps, the dirt silt and other foreign material should further be removed by Industrial Vacuum Cleaners to make the floor totally dirt free, application/spraying of Anti-Bacterial chemicals to ensure total sterilization of tank from the inside, inside of the tank should be treated with specially developed 4 ft long ultraviolet Radiator to kill further floating bacteria/virus in order to make the tank totally clean, bacteria free and safe for storage of drinking water. All the above operations should be executed by trained workers and technicians, properly dressed along with gum boots, to work as per the direction of Engineer in charge. |
| 42 | Cleaning of PVC water tanks of capacity exceeding 500 litres but not exceeding 1000 litres including chemical treatment with Anti-bacterial agent consisting of following process: -Dewatering the tank with submersible pump, de-silting and removing of left over dirty water up to 100 to 150 mm in the bottom of the tank and sludge with special sludge pump, cleaning of walls and ceiling with special mechanized high pressure jet machines by rotary jet system at 100-120 Bar pressure (120 Kg /sq cm) which dislodges the layer of dirt, algae, fungus stuck on its surface usage of scrubbing machines for old stains and cleaning chemicals if required of make Eureka Forbes Ltd or equivalent as approved by GE, floor of the dirty tank should be thoroughly cleaned up by fry jet cleaner to accumulate all dirt ,the remaining sludge should than be removed by sludge pumps, the dirt silt and other foreign material should further be removed by Industrial Vacuum Cleaners to make the floor totally dirt free, application/spraying of Anti-Bacterial chemicals to ensure total sterilization of tank from the inside, inside of the tank should be treated with specially developed 4 ft long ultraviolet Radiator to kill further floating bacteria/virus in order to make the tank totally clean, bacteria free and safe for storage of drinking water. All the above operations should be executed by trained workers and technicians, properly dressed along with gum boots, to work as per the direction of Engineer in charge. |
| 43 | Supply and Fix in repair,stainless steel wire cloth, 0.36mm nominal dia. of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 44 | Supply and Fix,3 mm thick sheet glass, ordinary quality and glazing with oil puttyin squares not exceeding 0.50 Sq M in each pane with and including hacking out old broken glass (any thickness, size, quality or description) fromframe including providing wooden beads painted with two coat of enamel paint over a coat of primercomplete all as specified and directed. |
| 45 | S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane and including hacking out old broken glass (any thickness, size, quality or description) fromframe including providing wooden beads painted with two coat of enamel paint over a coat of primercomplete all as specified and directed. |
| 46 | M & L Securing glass of any description in existing wooden frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) |
| 47 | S & F double action concealed type floor springs (hydraulically regulated) made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel top cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed. |
| 48 | S & F exposed type hydraulically regulated door closers, universal closer, bottle type (type A), Designation No. 3, suitable for 61 kg to 80 kg mass of doors & 851 mm to 1000 mm width of door, aluminium alloy non porous body and black plate, aluminium alloy piston or pack piston/ pillion, anodized finish not be less than Grade AC 15 of IS 1868 : 1996 with transparent anodic film as per IS 3564: 1995 complete all as specified and as directed. |
| 49 | Supply and Fix, bib tap, cast copper alloy, fancy type, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,15 mm bore and fixed, complete all as specified and directed. Make:Cat No.QQT-7037 of Jaquar or equivalent make of MARC/Kohler) |
| 50 | Supply and Fix, stop valves, cast copper alloy , fancy type, chromium plated,screwed down, high pressure with long shank and cup (concealed type),screwed both ends for steel pipe of for unions, 15 mm bore, complete all asspecified and directed.Make:Jaquar /Marc/Kohler) |
| 51 | Supply and Fix, in repair stop valves/Angle cock, cast copper alloy, fancy type, chromium plated,screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed. |
| 52 | Supply and Fix, pillar taps, cast copper alloy, with capstan heads, fancy type,chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore, including taking down existing unserviceable one complete all as specified and directed. |
| 53 | Supply and Fix, brass CPfancy centre hole basinmixer for mixing hot & coldwater screwed down for iron pipe 15 mm bore and fixed, with including hand shower and tube inlcuding taking out unserviceable existing one complete all as specified and directed. (Makemixer cat part no. QQT-7169B of Jaquar or equivalent make Kohler/Marc) |
| 54 | S & F in repair 15mm bore gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complite all as specified and as directed |
| 55 | Supply and Fix, brass CPfancywall mixer with L bends (including provision of O/H shower & hand shower) for mixing hot & coldwater screwed down for iron pipe 15 mm bore and fixed, with including hand shower and tube inlcuding taking out unserviceable existing one complete all as specified and directed. (Make Hand shower cat part no. HSH-CHR-1717 and wall mixer cat part no. QQT-7281 of Jaquar or equivalent make Kohler/Marc) |
| 56 | S&F in repairs health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed |
| 57 | S & F brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 58 | Supply and Fix, brass chromium plated,towel rail, 20mm dia, , 60cm long between flanges,complete all as specified and directed.Make Cat no.ACN-1111NM of Jaquar or equivalent of Marc/Kohler |
| 59 | Supply and Fix, in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed |
| 60 | S & F of 15mm size PVC connections with PTMT nuts of length 600mm complete all as specified and directed. |
| 61 | S&F in repairs 32mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed |
| 62 | S&F in repairs 40mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed |
| 63 | Supply and Fix, in repairbrass chromium plated toilet holder papercomplete all as specified and directed. |
| 64 | Supply and Fix in repairs, brasschromium plated soap dish, ., fixed with brass chromium plated screws, complete all as specified and directed. (Make Jaquar Cat part No. AQN-7731/Marc/Kohler) |
| 65 | Supply and Fix, in repair corner glass shelfincluding bracket and railingcomplete all as specified and directed (Cat No.1173 of Jaquar or Kohler/MARC |
| 66 | S&F 500 ltrsIS markedmultilayer rotational moulded polythytene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position withand including 20mm PTMT ballvalves high pressure with polythene float and nut with and including dismantling exsiting one complete all as specified and directed . |
| 67 | S&F 1000 ltrsIS markedmultilayer rotational moulded polythytene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position withand including 25mm PTMT ballvalves high pressure with polythene float and nut with and including dismantling exsiting one complete all as specified and directed . |
| 68 | S&F in repairs PVC ball valve 20mm dia high pressure of PTMT with aluminium rod &high density plastic ball screwed for iron pipe complete all as specified and directed . |
| 69 | Supply and Fix, sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 950mm x 510mm bowl size 410mm x 410mm x 230mm, with and including taking out unserviceable one complete all as specified and directed. |
| 70 | S & F Kitchen stainless steel plate rack (24\" X 24\" X 10\") including necessary fixing / fittings & making good the existing surfaces complete all as specified and directed. Make Prayag Cat No P-310 or equivalent as per PS |
| 71 | Taking up or down, steel tubing 15 mm bore, and connection including cleaning for re-fixing or removal from site of work complete all as directed. |
| 72 | Taking up or down, steel tubing 20 mm bore, and connection including cleaning for re-fixing or removal from site of work complete all as directed. |
| 73 | Cutting chases in brick walls to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., not exceeding 10 cm girth and making good the same with cement concrete M15 (Nominal Mix) using 12.5 mm nominal size coarse aggregate or cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 complete all as specified and as directed. |
| 74 | Materials and Labour for galvanized steel tubing, medium grade, 15 mm borewith all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed. |
| 75 | Materials and Labour for galvanized steel tubing, medium grade, 20 mm borewith all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed. |
| 76 | Refixingold steel tubing and connections 15mm bore in newor old position (wall, ceiling , floors) etc complete all as specified and as directed. |
| 77 | Refixingold steel tubing and connections 20mm bore in newor old position (wall, ceiling , floors) etc complete all as specified and as directed. |
| 78 | S & F 20mm bore PVC coated MS conduit drapery rods, suitable for door/widows curtain with incl necessary fancy type dooms as approved by GE, and fitted to each end, brackets and fixed to wall complete all as specified and directed. |
| 79 | S&F in repairs Door seal (Snake guard) with Aluminium frame powder coated complete all specified |
| 80 | M & L forpost contructional antitermitefor treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified anddirected. |
| 81 | M & L forproviding and injecting chemical emulsion for post contructional antitermite along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres perlinear metreincluding drilling and plugging holes etc. in apron complete all as specified anddirected. |
| 82 | M & L forproviding and injecting chemical emulsion for post contructional at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing complete all as specified anddirected. |
| 83 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed. |
| 84 | M&L Brick work with flyash bricks old size bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as directed. |
| 85 | M & L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick built in CM 1:4 completeall as specified and as directed |
| 86 | Taking down eaves gutters and rainwater pipes (any size or pattern), soil waste pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed |
| 87 | S & F PVC-U, type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 110 mm dia, laid in trenches complete all as specified and directed by Engineer- in- charge . |
| 88 | S & F PVC-U, type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 110 mm dia, fixed to walls incuding mild steel clamp @ 1metre C/C complete all as specified and directed by Engineer- in- charge . |
| 89 | S & F UPVC bends without inspection door (any angle), 110 mm dia conforming to IS 14735: 1999 complete all as specified and directed by Engineer- in- charge |
| 90 | S&F 110mm dia UPVCjunction single, (single T) equal or unequal with access door complete all as specified and as directed. |
| 91 | S&F UPVC vent cowl100mm dia complete all as specified and as directed. |
| 92 | S & F in repairs wash basins, vitreous china, white, flat back, size 550 mm X 400 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed. |
| 93 | S & F in repairs 10 litres capacity, low level, syphonic type, white, plastic flushing cistern as per IS 7231: 1994 with inlet, ball valve, float and handle including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe complete all as specified and as directed. |
| 94 | S&Fin repair gratingdoom 125mm dia with waste hole of PTMT minimum weight 40 Gms complete all as specified and as directed. |
| 95 | Resecuring or easing andadjusting without taking down shutter area not exceeding 1.00 sqm each with and includingadjusting and also refxing builders hardware as reqd incl removal of unserviceable screws etc.hardware items will deemed to be included quoated rates complete all as specified and as directed. |
| 96 | Resecuring or easing andadjusting without taking down shutter area exceeding 1.00 sqm eachbut not exceeding2.00 sqm each with and includingadjusting and also refxing builders hardware as reqd incl removal of unserviceable screws etc. hardware items will deemed to be included quoated rates complete all as specified and as directed. |
| 97 | Resecuring or easing andadjusting without taking down shutter area exceeding 2.00 sqm each with and includingadjusting and also refxing builders hardware as reqd incl removal of unserviceable screws etc.hardware items will deemed to be included quoated rates complete all as specified and as directed. |
| 98 | Taking down and fixing in same opening wooden door shutter area not exceeding 1.00 sqm each with and includingadjusting and also refxing builders hardware as reqd incl removal of unserviceable screws etc.hardware items will be paid at supply only rates except screws and nailscomplete all as specified and as directed. |
| 99 | Taking down and fixing in same opening wooden door shutter area exceeding 1.00 sqm eachbut not exceeding2.00 sqm each with and includingadjusting and also refxing builders hardware as reqd incl removal of unserviceable screws etc.hardware items will be paid at supply only rates except screws and nailscomplete all as specified and as directed. |
| 100 | Taking down and fixing in same opening wooden door shutter areaexceeding 2.00 sqm each with and includingadjusting and also refxing builders hardware as reqd incl removal of unserviceable screws etc.hardware items will be paid at supply only rates except screws and nailscomplete all as specified and as directed. |
| 101 | Supplyonly 150 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed. |
| 102 | Supplyonly 150 mm long Aluminium anozied barrel tower bolt of extruded section complete all as specified and as directed. |
| 103 | Supplyonly250mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed. |
| 104 | Supplyonly250mm longAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed. |
| 105 | Supplyonly100mm long Butt hinges, mediumweight, cold rolled mild steel fixed with screw complete all as specified and as directed. |
| 106 | Supplyonly100mm long Butt hinges, mediumweight, cold rolled mild steel fixed with welding complete all as specified and as directed. |
| 107 | Supplyonly 75mm long Butt hinges, mediumweight, cold rolled mild steel complete all as specified and as directed. |
| 108 | Supplyonly75mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised Type C-21 complete all as specified and as directed. |
| 109 | Supplyonly 125mm long Parliament hinges, mild steel cold rolled complete all as specified and as directed. |
| 110 | Supplyonly40mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed. |
| 111 | Supplyonly 150mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed. |
| 112 | Supplyonly150mm long aluminium handles, cast type, anodised complete all as specified and as directed. |
| 113 | Supplyonly100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 114 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified |
| 115 | M&L for 25mm thick cement concrete type B1 1:2:4 (20mm stone aggregate) as in sub floor, sub bases, floors and pavings etc complete all as specified. |
| 116 | Materials and Labour for, Digital Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,conforming to IS 15622, Grade B II, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4),complete all as specified and directed. |
| 117 | Materials and Labour for, Digital glazed ceramic coloured tiles, 300 X 200 X 8mmthick, conforming to IS 15622, Grade B III, on vertical surface of wall such as dados,skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:4), complete all as specified and directed. |
| 118 | S & F in repairs vitreous china wash down water closet (pedestal pattern), white including thermoplastic seats and covers of grade 2 type, flat with hinging device of bronze or brass with nickel chromium plating, fixing bolt, connector to flush pipe and making connections to flush pipe, connector to branch soil pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant and includingCP jet nozzle for EWC incuding connection to GI pipe line complete complete all as specified and as directed by Engineer-in-Charge. |
| 119 | S & F in repairs vitreous china squatting pan, \"Orissa\" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S” trap, front or back inlet and integral foot rests, any pattern and including fixing bolt, connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge. |
| 120 | S & F in repairs vitreous china squatting pan, \"Orissa\" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S” trap, front or back inlet and integral foot rests, any pattern and including fixing bolt, connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge. |
| 121 | S & F in repairs in repairs thermoplastic seats and covers of grade 2 type, flat with hinging device of bronze or brass with nickel chromium plating complete all as specified and as directed. |
| 122 | S & F flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm connected to PVC waste fittings complete all as specified and as directed. |
| 123 | S & F in repairs 15 mm nominal size, nonrising spindle type fancy bib taps as per IS 8931: 1993, two ways in double control, made of cast brass including Knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed. |
| 124 | Supply and Fix, in repair PVC box type mirror cabinet selected quality of size 45cmX35cmX15cm thick coloured fixed with min 04 Nos screws fixed on walls ,complete all as specified and directed.(Make Parayag Cat No.557 or equivalent make |
| 125 | S&F in repairs jet spray (stainless steel) with 1 mtr PVC tube complete all as specified and as directed. Make-Prayag CAT No BEA-17 or equivalent make as per PS |
| 126 | Taking down carefully (copper/aluminium) point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants regulators sub main wiring, light fittingsetc complete and making good disturbed surfaces of wall, floor or ceiling with plaster or tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed. |
| 127 | Taking down carefully copper/ aluminium submain wirings of any size (2 runs single core including earth continuity) complete including PVC casing capping/ PVC conduit/Steel Conduit with fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc., complete all as specified and directed. |
| 128 | Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) (FRLSH)as per IS 694: 2010 PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including 25mm wide double locking type PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheetcover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) (FRLSH)PVC as per IS 694: 2010 insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for :-Note : Wiring to be done as per approved IE rules colour code. |
| 129 | One light point controlled by one switch |
| 130 | One fan point controlled by one switch |
| 131 | One 3 Pin 5 Amps socket outlet independent |
| 132 | One 3 Pin 5 Amps socket outlet on the same board with other switch |
| 133 | One bell point controlled by one switch |
| 134 | Materials and Labour for point wiring with 2.50 Sq. mm (nominal area) (FRLSH)PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switch socket outlet etc and including 2.50 Sq. mm (nominal area) (FRLSH)PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for one 3 Pin 15 Amps socket out let independent, complete all as specified and directed.(i)Wiring to be done as per aproved colour code. |
| 135 | M & L for concealed point wiringwith and including single core PVC insulated, unsheathed flexible conductor (FRLSH)cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor (FRLSH)cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end for the following complete all as specified and as directed. (Note: (i) The chases in the wall shall be cut with elect cutter andrates of the samewill deemed to be included in quoated rates (ii) The disturbed surfaces of wall shall be made good with cement plaster 1:4 including matching the surfaces with as per existing finishes and to the entire satisfaction of Engineer in Charge):- (iii)Wiring to be done as per approved colour code in IE rule. |
| 136 | One light point controlled by one switch |
| 137 | One fan point controlled by one switch |
| 138 | One 3 Pin 5 Amps socket outlet independent |
| 139 | One 3 Pin 5 Amps socket outlet on the same board with other switch |
| 140 | One bell point controlled by one switch |
| 141 | Materials and Labour for concealed type point wiring with 2.5 Sq. mm (nominal area) (HR&FR)as per IS 694: 2010, ISI marked PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, drawn in andincluding medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switch socket outlet etc and including 2.50 Sq. mm (nominal area) (HR&FR)PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for one 3 Pin 15 Amps socket out let independent, complete all as specified and directed.(Note: (i) The chases in the wall shall be cut with elect cutter andrates of the samewill deemed to be included in quoated rates (ii) The disturbed surfaces of wall shall be made good with cement plaster 1:4 including matching the surfaces with as per existing finishes and to the entire satisfaction of Engineer in Charge):- (iii)Wiring to be done as per approved colour code in IE rule. |
| 142 | Supply and fix switch piano, flush button, single pole, one way, 5 Amps, complete all as specified and directed. |
| 143 | Supply and Fix,switch socket combination 2 in 1, 5A,flush type, complete all as specified and directed. |
| 144 | Supply and Fix,switch socket combination 3 pin 5A/16A, 5 in 1 flush type, complete all as specified and directed. |
| 145 | S&F, bell electric, Ding Dong AC. 230 volts, single pole complete all as specified and directed. |
| 146 | Supply and fix ,bell push, flush type, single pole, 5 Amps, complete all as specified and directed. |
| 147 | Supply and Fix , Modular Switch, one way, 6 Amps, 1 Module, complete all as specified and directed. |
| 148 | Supply and Fix , Modular Switch, one way, 16 Amps, 1 Module, complete all as specified and directed. |
| 149 | S & F modular socket outlet, 6Amps, 2 and 3 pin combined two modules complete all as specified. |
| 150 | S & F modular socket outlet, 6Amps/ 16 Amps, 2 and 3 pin combined two modules complete all as specified. |
| 151 | Supply and Fix, Modular Fan step regulator, 120W - 2 module,complete all as specified and directed. |
| 152 | Supply and Fix in repair stepped type electronic fan regulator, flush type, on existing phenolic laminated sheet etc. as required , complete all as specified and directed. |
| 153 | Supply and fix Ceiling Rose, three terminal, PVC/ Polycarbonate insulated body, complete all as specified and directed. |
| 154 | Supply and fixPolycarbonate angular lamp holder with back plate, suitable for batten fittings complete all as specified and directed. |
| 155 | M&L for Sub main wiringwith two runs ofsingle core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLS cable of 4.0 Sqmm as per IS 694: 2010, ISI marked (with colour code), drawn in but including PVC casing caping not less than 25 mm width, ISI marked, double locking typeincludingone run of PVC insulated unsheathed, multistranded copper conductor FRLS cable of 4.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in surface complete all as specified and directed . |
| 156 | M&L for Sub main wiringwith two runs ofsingle core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLS cable of 6.0 Sqmm as per IS 694: 2010, ISI marked (with colour code), drawn in but including PVC casing caping not less than 25 mm width, ISI marked, double locking type includingone run of PVC insulated unsheathed, multistranded copper conductor FRLS cable of 6.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in surface/ recess complete all as specified and directed |
| 157 | Supply and Fix, double door, sheet metal enclosure for DBs for mounting of MCB for 415 Volts, 4 way, with 200 Amps rated bus bar, Triple Pole & Neutral, including dismantling taking down unserv. DBcomplete all as specified and directed[Cat No.DBTPE004DD of Make L&T or equivalent Model of Make Legrand/Siemens] |
| 158 | Supply and Fix, Single Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 2 way, with 100 Amps rated bus bar, Single Pole & Neutral, fixed in repairs, including blanking platecomplete all as specified and directed. [ Make Legrand or equivalent Model of Make L&T/ Seimens] |
| 159 | Supply and Fix, Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 8 way, with 100 Amps rated bus bar, Single Pole & Neutral, fixed in repairs including blanking plate , complete all as specified and directed.[Cat No. 5076 11 of Make Legrand or equivalent Model of Make L&T/ Seimens] |
| 160 | Supply and Fix, Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 4 way, with 100 Amps rated bus bar, IK09 Single Pole & Neutral, fixed in repairs, including blanking platecomplete all as specified and directed.Make Legrand or equivalent Model of Make L&T/ Seimens] |
| 161 | Supply and Fix, miniature circuit breaker (MCBs) Single pole and neutral, 240 Volts, 10KA, 63 Amps C-curve ,as per IS 60898-1 2002 complete all as specified and directed. |
| 162 | Supply and fix in repairminiature circuit breaker (MCBs) single pole & neutral, 240 Volts, 10KA, 40 Amps,C-curve complete all as specified and directed. [Cat No. 4086 18 of Make Legrand or equivalent Model of Make L&T/ Seimens] |
| 163 | Supply and fixin repairminiature circuit breaker (MCBs) triple pole, & neutral, 415 Volts, 10KA, 63 Amps,C-curve complete all as specified and directed. Make Legrand/ L&T/ Seimens] |
| 164 | Supply and fixin repairminiature circuit breaker (MCBs) triple pole, & neutral, 415 Volts, 10KA, 40 Amps,C-curve complete all as specified and directed. Make Legrand/ L&T/ Seimens] |
| 165 | Supply and Fix, miniature circuit breaker (MCBs), single pole, 240 Volts,10KA,,C-curve 6-32 Amps complete all as specified and directed. |
| 166 | Supply and Fix, miniature circuit breaker (MCBs), single pole, 240 Volts,10KA,,C-curve 63 Amps complete all as specified and directed. |
| 167 | S & F in repair single pole and neutral enclosure with two pin and earth,plugand socket , suitable for single phase 240 V,complete with one single pole MCB of capacity 20 amps having `C` charactristic, breaking capacity 10 KA, including industial plug top, complete all as specified and as directed. Make : Legrand cat part No. 607841 or equivelent in Schinder/ L&T. |
| 168 | Taking down existing unserviceable light fitting any type (600 mm x 600 mm) recess mounting/surface and S&F LED light fitting 36 watt recess mounting of size 600 mm x 600 mm , white powder coated CRCA housing with LEDs, seam less front frame with flat white high transmission diffisuer, classic design with glare free soft illumination, cool white,including making electric connection from source with PVC sheathed copper conductor wire complete all as specified and directed.. Make : Century /Crompton /Philip/Wipro |
| 169 | S&F in repair single phase direct connection typeKWH meter , temper proof, plastic body with LCD display, 230/240V, 10-30 Amp, accuracy class I, 50 Hz, Conformingto IS13779, IP 54,with ( parameters to show Date, time, current reading, KW, PF) in existing positionby providing Polycarbonate box cover, including making complete electric connections complete all specifed and directedMake : Secure (Model Saral) or eqivelent inL&T Note : Old meter to be deposite in AGE E/M store. |
AI Tender Summary
Tender Timeline
Jul 15, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 05, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender