Ministry Of Health And Family Welfare-MOHFW has published Electrical Works In Substation At Neigrihms Emd, Pan Card, Gst, Work Experience, Turnover. Submission Date for this Tender is 03-08-2022. Electrical Maintenance Tenders in shillong Meghalaya. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Performing Earth pitsidentification, numbering and measuring of earth pit resistance value in ohms including identification of pits by excavation whereever needed and also performing Continuity test in all substations and other areas. |
2 | Supply of High voltage insulating mats of size 1mx2m (W x L) conforming toIS:15652 latest for voltage level upto 11Kv resistant to acid and oil and low temperature. Test certificate from Govt. registered lab/Auithorised testing lab has to be enclosed.(Sample has to be approved by concerned section.) |
3 | Supply Electrical Safety Latex Gloves size 11, conforming to IS:4770:1991 latest of Type 4 (Guuntlet type) with Polyethylene bags and sealed packing for voltage use ofupto 17000V ac rms. Test certificate from Govt. registered lab/Auithorised testing lab has to be enclosed.(Sample has to be approved by concerned section). |
4 | Supply Safety rubber shoes conforming to No IS: 5557: 2004 latest of type-1 (Non oil resistant). (Sample has to be approved by concerned section). |
5 | Supply of Neo Industrial Safety Belts and Harnesses of Class L, conforming to No IS:3521:1999.(Sample has to be approved by concerned section). |
6 | Supply of safety helmets of high quality ,high impact ,heat & chemical resistant ,light weight and tough conforming to IS 2925: latest of High Density Polyethylene (HDPE) make. (Sample has to be approved by concerned section). |
7 | Supplying fitting and fixing of fire buckets under sloppy canopy GI make (2 nos. in each) filled with clean dry sand as required in areas as instructed by concerned section.( Sample has to be approved by concerned section.) |
8 | Supply of Transformer oil (clear transparent & free from suspended matter or sediments) conforming to standard IS 335 or IS 12463in brand new steel barrel ISI marked with suitable coating from inside and outside. Test Report from CPRI Lab/ Govt. Authorised testing lab must be produced. |
9 | Performing DGA and BDV tests of transformer oil sample testing as per IS : 1866-2000 for all transformers in all substations. Samples (500ml) have to be collected and given to CPRI Lab/Govt. Authorised Testing Lab. |
10 | Supplying, installation & fixing Earthing with copper earth plate 600mmx600mmx6mm thick including accessories, on an earthing pit not less than 3m below and providing necessary masonry/CC enclosure with cover plate having locking arrangement & watering pipe etc with charcoal, salts etc complete as required after which performing earth resistance testing. (Earth test resistance should not be more than 2ohms.) |
11 | Supplying and laying of 20mm x 5mm Copper Strip from earthing pit upto required panel with proper nut, bolt, clamps, etc. wherever required. |
12 | Supply of Surya-400 Crimping tool (Industrial type) with crimping capacity 25-400sqmm, hand operated. (Sample has to be approved by concerned section.) |
13 | Supply of Samrat-16 Crimping tool (Industrial type) with crimping capacity 1.5-16sqmm, hand operated with box packaging. (Smple has to approved by concerned section.) |
14 | Supply of Prithvi-1000 Hydraulic Crimping tool (Industrial type) with range 50-1000sqmm. (Sample has to be approved by concerned section.) |
15 | Supply of Meggar test 1000Volts insulation range 10000Mohms (Handdriven type).(Smple has to approved by concerned section.) |
16 | Supply of Digital Meggar test 1000Volts with insulation range 1Gohms.(Smple has to approved by concerned section.) |
17 | Supply of Cable Route Finder.(Smple has to approved by concerned section.) |
18 | Supplying fitting and testing of Multifunctional Meter for electrical parameter monitoring to be retrofitted in existing HT or LT Panels for electrical measuring puposes. Should be of branded make only such as (L&T, Schneider, Meco, Rishabh etc.). Also including training for checking.(Sample has to be approved by concerned section and has to be retrofitted to fit in existing panel whenever needed.) |
19 | Supply of SMF battery 12volt 64AH of dimension 14x7x9 inches (L x B x D) of branded make only (Rocket, Amaron, etc.). (Sample has to be approved by concerned section.) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail