Power Boards / Undertakings / PSU Closing in 0 days TDR #33102379

Running Contract For Extension / Improvement Works In Illuppur Sub-Division In Pudukkottai Edc - 2 Pit Excavation For 7.5 Mts / 8 Mts Pole In Ordinary Soil Including Cleaning Of Site ( Each Pit ) 3 1.25 X 0.6 X 1.5M [ Ordinary Soil ] 4 Semi

Issued by Boards / Undertakings / PSU · Pudukkottai, Tamil Nadu
Tender Value
25 Lakhs
Estimated cost
Bid Submission
30 Jul 2022
0 days left
EMD
25000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pudukkottai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Running Contract For Extension / Improvement Works In Illuppur Sub-Division In Pudukkottai Edc - 2 Pit Excavation For 7.5 Mts / 8 Mts Pole In Ordinary Soil Including Cleaning Of Site ( Each Pit ) 3 1.25 X 0.6 X 1.5M [ Ordinary Soil ] 4 Semi Rocky Soil 5 Pole Pit For 9.0M And 9.14 M Psc / Rcc / All Metal Poles ( Each Pit ) 1.25 X 0.6 X 1.83 Mtr 6 Ordinary Soil 7 Semi Rocky Soil 8 Heavy Rocky Soil Where Blasting / Cheseling Required [ Specific Approval Should Be Obtained From Concerned Ee ] 9 Stay Pit 10 In Ordinary Soil [ 0.95 X 0.6 X 1.2M ] 11 Semi Rocky Soil 12 Stay Pit In Heavy Rocky Soil Where Blasting / Cheseling Reqiured [ Specific Approval Should Be Obtained From Concerned Ee ] 13 Erection Of Poles & Stays ( Including Refilling Of Excavated Earth ) 14 Erection Of 7.5M / 8.0M Poles [ Rcc / Psc ] 15 Erection Of 9.00M / 9.14M Rcc / Psc / Rail Pole, Tubular Pole And All Metal Poles 16 Stay Set 17 Erection Stay Set Complete 18 Stay Erection Without Rod And Pit 19 Replacement Of Stay Rod Only. ( Including Stay Pit Excavation & Refilling & Erection ) 20 Replacement Of Guy Shackle Only In Existing Stay 21 Erection Of Line Materials 22 Fixing Of Lt 1 Ph X Arm 23 Fixing Of Lt / Ht Ti Fitting 24 Fixing Of Lt 3 Ph X Arm 25 Fixing Of 3 [ 1 / 2 ] V` X Arm 26 Fixing Of4 [ 1 / 2 ] V` X Arm 27 Fixing Of 5 V X Arm 28 Fixing Of Tapping Channel / Guarding X Arm 29 Providing Of Line Spacers In Lt Lines 1 Phase 30 Providing Of Line Spacers In Lt Lines 3 Phase 31 Erection Of Ab Switch With Pt Insulator & Jumpering Complete 32 Erection Of Centre Rotating Switch Ab Switch Complete 33 Fixing Of Ht Pin Insulator / Strain Disc 34 11 Kv Pin Insulator With Pin 35 11 Kvstrain Disc / Polymer Disc With Hardware 36 22 Kv Pin Insulator With Pin 37 22 Kv Strain Disc / Polymer Disc With Hardware 38 33 Kv Pin Insulator With Pin 39 33 Kv Pinstrain Disc / Polymer Discwith Hardware 40 Fixing Of Lt Pin Insulator With Pin 41 Lt Shakle With Hardware 42 Fixing Of Aluminium Knob 43 Paving Stringing And Sagging Of Conductor Including Binding Of Pin And Proper Tight [ Including Transport Of Condutor From Road Side To Work Spot ] Per Run 44 Upto 7 / 2.59 Mm Acsr, 7 / 2.50 Aaac Including Pvc Cable Upto 25 Sqmm 45 Acsr 7 / 3.35Mm & 7 / 3.15 Aaac Including Pvc Cable Above 25 Sqmm 46 Acsr 7 / 4.09 Mm 47 Above 7 / 4.09 Mm Acsr & Dog Conductor 48 For Lc Works ( All Types Of Conductor ) 49 Route Surveying Andpeg Marking Of Ht / Ltlines 50 Earthing Wiring And Connection Including Transporting Of Earth Pipe And Excavation Of Pit ] 51 Transformer Structure Earthing 10Ft Depth - 3 Nos Of Pipe Throughtubes 52 Dp Earthing Including All Works [ Double Side Earthing ] 53 Erection Of 4Th Earth Pipe Including Earthing 54 Earthing Of Poles 55 Earth Pit Masonary Work 3 Nos Earth Pits Or Using 3 Nos Concrete Tub. 56 Replacement Of Detoriated Earth Pipe Per Location 57 Concreting With Mixture 1:3:6 [ Including All Materials ] . 58 ( A ) Transformer Structure Poles Mass Concreting With Coping 0.75Mx0.5Mx1.8M Coping Material Supplied By The Contractor ( Cement =100 Kg River Sand, 40 Mm Jully Including Labour 2 Nos Of Pole In Structure ) 59 ( B ) Mass Concerting For Pole In Line0.75Mx0.5Mx1.8M 60 ( C ) Sleeve Concret For Poles In Line 0.75M X 0.5X 0.9M 61 ( D ) Sleeve Concret For Stay Set 0.3X0.3X0.75 62 Erection Of Distribution Transformer Structure Complete 63 Excavation Of Structure Pole Pits 0.9 X0.9 X 1.83 Mtr 64 Transporting Of Pole To Pit Location 2 Nos. 65 Erection Of Poles 2 Nos 66 Excavation Of Stay Pit 4 Nos 67 Erection Of Stay Set ( 4 Sets ) 68 Mass Concreting ( Cement:Sand:Jelly Supplied By The Contractor ) 2 Nos. 69 Erection Ofab Switch 70 Transformer Structure Earthing 10Ft Depth - 3 Nos Of Pipe Through Earth Tubes 71 Erection Of Top Channel 72 Bed Channel [ 2 Nos Channel ] Erection 73 Cross With Stud For Bed Channel Erection 74 Erection Of Belting Angle / Hg Fuse Angle 75 Erection Ofhg Fuse Set 76 Erection Of Ht Las With Jumpering And Earthing 77 Erection Of Lt Las With Jumbering And Earthing 78 Erection Of Jumpering [ Ht Side ] 79 Transformer Wiring In Lt Side Including Jumpering Bus Bar Etc. 80 Erection Lt Open Type Fuse Unit Arrangement Single 81 Erection Lt Open Type Fuse Unit Arrangementdouble 82 Painting Of Stru. Complete Excluding Dt [ Two Coat Of Red Oxide ] All Metal Parts ( Excluding Cost Of Paint ) . 83 Painting Of Stru. Complete Excluding Dt [ One Coat Alu Paint, Excluding Cost Of Paint ) 84 Colour Washing Of 2 Numbers Structure Pole [ Excluding Cost Of Distember / Snowsem ] 85 Painting Name Of Ss At Seating Channel Including Paint. 86 Painting Of Dt Alone [ Excluding Painting ] With Red Oxide And Double Coating Of Aluminium Paint. 87 Erection Of Single Pole Mounted Dt Erection Work ( Including Pole Concreting & 3Nos Earth Pipe & Paintimng ) 88 Erection Of Dt Metering Arrangement ( Materials Supplied By The Board ) 89 Erection Of Distribution Transformer / Dismantling Of Dt 90 Upto 100 Kva 91 Above 100 Kva And Upto 250 Kva 92 500 Kva 93 Colour Washing Of Rcc / Psc Poles 94 Numbering Of Poles Including Cost Of Paint / Loc [ Black Background And Yellow Letters ] 95 Painting Of Sc Details In The Meter Board / Agl Boxes / Hut Scs Including Paint. 96 Service Connection 97 Transporting Of Required Materials From Road Side To Work Spot And Erection Of Street Light Fixture Including Wiring Clamping Of Pipe Aerial Board Assembling 98 Transporting Of Required Materials From Road Side To Work Spot And Erection Of 250 Ws.V. Lamp / Mercury Lamp / Led Yard Light Fittingincluding Wiring, Clamping Of Pipe, Serial Board Assembling Etc. 99 Fixing Of Street Light Fitting With 2 Cfl / 4 Cfl 100 Provision Of St. Lt. Switching Arrangements Including Fixing Meters, Wiring, Service Board Etc. 101 Erection Of Hut Service Connection Complete With / Without Meter Including Transport Of 5Materials From Section Store To Work Spot 102 Erection / Dismantling Of Metering Set 11 Kv / 22 Kv / 33 Kv 103 Fabrication Works. 104 Labour Charges For Alteration Of Back Clamp / Stay Clamp To Suitable For Works. 105 Providing Of Holes. 106 All Size Angles / Channel Upto 5 / 8 107 All Size Angles / Channel Above 5 / 8 108 Slot Holes In Flat / Angles / Channel Upto 3 / 4 109 Slot Holes In Flat / Angles / Channel Above 3 / 4 110 Fabrication Of Centre Support Only For Dt Structure 111 Cutting Of Rs Joist / Angles / Ms Channels 112 Welding Of Rs Joist / Angles / Ms Channels 113 General 114 Set Right The Leaning Pole In Both Ht & Lt [ Pin Point ] Location 115 Set Right The Leaning Pole In Both Ht & Lt [ Cut Point ] Location 116 Resagging Of Lines For All Sizes Cut Point Location 117 Converting Pin Point Into Cut Point Ht Lines 118 Converting Pin Point Into Cut Point Lt Lines 119 Clearing Tree Branches Ofcoconut Tree 120 Clearing Tree Branches Of Neem, Tamarind, Countrytree Etc., 121 Releasing And Re-Erection Of1 Ph Sc Wire [ During Conductor Or Support Change ] 122 Releasing And Re-Erection 3 Ph Sc Wire [ During Conductor Or Support Change ] 123 Destruction Of Pole Concerting At Site. 124 Retrieving Grill From Detoriated Pole [ Grill Separate From Damaged Pole ] 125 Re Earthing Of Structure Completely Including Earthpipe Changing If Any 3Nos Earth Pipe 126 Re Examination Of Dt Earthing ( Digging , Inspection And Making Connection In Between Extg. 3Nos Earth Pipe ) 127 Guarding Arrangement :- 128 Cradle Guarding Including Earthing And Earth Pit Excavation [ Railway & P&T Crossing ] 129 Flat Guarding With 4 Wire 130 Split Netural Guarding 131 Loading And Unloading : 132 Loading Of 7.5 Mtr / 8.0 Mtr Rcc / Psc / Metal Pole [ Per Pole ] 133 Loading Of [ 9.14 Mtr ] 9.0 Mtr Poles Rcc / Psc Pole / Metal Pole [ Per Pole ] 134 Unloading Of Psc / Rcc / Metal Poles 135 Transporting From Road Side To Workspot 136 Transport 7.5 Mtrs / 8.00 Mtrs Of Poles Including R.S.Joist And Rail Poles Upto 1.0 Km 137 Transport 7.5 Mtrs / 8.00 Mtrs Of Poles Including R.S.Joist And Rail Poles Above Additional 1.0 Km Or Part Thereof [ Certified By Aee ] 138 Transport Of 9.0 Mtr And Above Poles Including R.S. Joist And Rail Poles Upto 1.0 Km 139 Transport Of 9.0 Mtr And Above Poles Including R.S. Joist And Rail Poles Upto Above Additional 1.0 Km Or Part Thereof 140 Transport Of Line Materials 141 Transport Of Line Materials [ Minimum 1 Mt ] From Sub Stores To Section Pocket Store Ornear To Work Spot At Road Side By Using Private Vehicleor Vice Versa Excluding Loading And Unloading Upto 8 Kms 142 Transport Of Line Materials [ Minimum 1 Mt ] From Sub Stores To Section Pocket Store Ornear To Work Spot At Road Side By Using Private Vehicleor Vice Versa Excluding Loading And Unloading Above 8 Kms And For Every Addl. 1 Km 143 Loading / Unloading Of Line Materials 144 Transport Of Equipements 145 Transporting Of Distribution Transformer / Metering Set By Using Private Vehicleload Of One No.Minimumup To 30 Km 146 .Transporting Of Distribution Transformer / Metering Set By Using Private Vehicleload Of One No.Minimum Above 30 Km For Every Addl .1 Km 147 Dismantling Works 148 Dismantling Of 7.5M / 8.0M Poles [ Rcc / Psc ] 149 Dismantling Of 9.00M / 9.14M Rcc / Psc / Rail Pole, Tubular Pole And All Metal Poles 150 Dismantling Stay Set Complete 151 Dismantling Of Lt 1 Ph X Arm / Lt / Ht Ti Fitting 152 Dismantling Of Lt / Ht Ti Fitting 153 Dismantling Of Lt 3 Ph X Arm 154 Dismantlingof 3 [ 1 / 2 ] V` X Arm 155 Dismantlingof Tapping Channel And Guarding X Arm 156 Dismantling Of 11 Kv Strain Disc / Polymer Disc With Hardware 157 Dismantling Of 22 Kv Pin Insulator With Pin 158 Dismantling Of 22 Kvstrain Disc With Hardware 159 Dismantling Of 33 Kv Pin Insulator With Pin 160 Dismantling Of 33 Kvstrain Disc With Hardware 161 Dismantlingof Lt Pin Insulator With Pin 162 Dismantlingof Lt Shackle With Hardware 163 Dismantling Of Aluminium Knob 164 Dismantling Of Conductor7 / 2.59 Mm Acsr, 7 / 2.50 Aaac Including Pvc Cable Upto 25 Sqmm 165 Dismantling Of Conductoracsr 7 / 3.35Mm & 7 / 3.15 Aaac Including Pvc Cable Above 25 Sqmm 166 Dismantling Of Conductoracsr 7 / 4.09 Mm 167 Single Phase Meter &3 Phase Meter 168 Replacement ( Releasing & Fixing ) Of Single Phase Meter ( Including Transport Charges ) 169 Replacement ( Releasing & Fixing ) Of Three Phase Meter ( Including Transport Charges ) 170 Checking Healthiness Of Agl.Meter 171 Checking Healthiness Of Agl.Meter1

BOQ

Name of Work: Running contract for Extension/Improvement works in Illuppur Sub-division in Pudukkottai EDC
Sl. No. Item Description
1Excauvation of pits
2Pit excavation for 7.5 mts / 8 mts pole in ordinary soil including cleaning of site (each pit)
31.25 x 0.6 x 1.5m [ordinary soil]
4Semi rocky soil
5Pole pit for 9.0M and 9.14 M PSC/RCC / all metal poles (each pit) 1.25 x 0.6 x 1.83 mtr
6Ordinary soil
7Semi rocky soil
8Heavy rocky soil where blasting/ cheseling required [specific approval should be obtained from concerned EE]
9Stay pit
10in ordinary soil [0.95 x 0.6 x 1.2m]
11semi rocky soil
12Stay pit in heavy rocky soil where blasting/ cheseling reqiured [specific approval should be obtained from concerned EE]
13Erection of poles & stays (Including refilling of excavated earth)
14Erection of 7.5m / 8.0m poles [RCC / PSC]
15Erection of 9.00m / 9.14m RCC / PSC/Rail pole, Tubular pole and all Metal Poles
16Stay set
17Erection stay set complete
18Stay erection without rod and pit
19Replacement of stay rod only. (Including stay pit excavation & refilling & erection)
20Replacement of guy shackle only in existing stay
21Erection of LINE MATERIALS
22Fixing of LT 1 ph \"X\" Arm
23Fixing of LT/HT TI Fitting
24Fixing of LT 3 ph \"X\" Arm
25Fixing of 3[1/2]\" \" V` X \" arm
26Fixing of4[1/2]\" V` X \" arm
27Fixing of 5\" V X arm
28Fixing of tapping channel / guarding \"X\" arm
29Providing of line spacers in LT lines 1 phase
30Providing of line spacers in LT lines 3 phase
31Erection of AB Switch with PT insulator & Jumpering complete
32Erection of centre rotating Switch AB Switch complete
33FIXING OF HT PIN INSULATOR / STRAIN DISC
3411 KV Pin insulator with pin
3511 KVstrain disc / polymer disc with hardware
3622 KV Pin insulator with pin
3722 KV Strain disc / polymer disc with hardware
3833 KV Pin insulator with pin
3933 KV PinStrain disc/polymer discwith hardware
40Fixing of LT Pin insulator with pin
41LT Shakle with hardware
42Fixing of Aluminium knob
43Paving Stringing and sagging of conductor including binding of pin and proper tight [including transport of condutor from Road side to work spot] per run
44Upto 7/2.59 mm ACSR, 7/2.50 AAAC including PVC cable upto 25 sqmm
45ACSR 7/3.35mm & 7/ 3.15 AAAC including PVC cable above 25 sqmm
46ACSR 7/4.09 mm
47Above 7/4.09 mm ACSR & DOG conductor
48For LC Works( All Types of Conductor)
49Route surveying andpeg marking of HT/LTlines
50Earthing wiring and connection including transporting of earth pipe and excavation of pit]
51Transformer structure earthing 10ft depth - 3 nos of pipe throughTubes
52DP earthing including all works [double side earthing]
53Erection of 4th Earth pipe including earthing
54Earthing of poles
55Earth pit masonary work 3 nos earth pits or using 3 nos concrete tub.
56Replacement of detoriated earth pipe per location
57Concreting with Mixture 1:3:6 [including All materials].
58(a) Transformer Structure Poles Mass Concreting with coping 0.75Mx0.5Mx1.8M coping material supplied by the contractor (cement =100 kg river sand, 40 mm jully including labour 2 nos of pole in structure)
59(b) Mass concerting for pole in line0.75Mx0.5Mx1.8M
60(c ) Sleeve concret for poles in line 0.75M x 0.5x 0.9M
61(d) Sleeve concret for Stay set 0.3x0.3x0.75
62Erection of Distribution Transformer Structure Complete
63Excavation of structure pole Pits 0.9 X0.9 X 1.83 Mtr
64Transporting of pole to pit location 2 Nos.
65Erection of poles 2 Nos
66Excavation of stay pit 4 Nos
67Erection of stay set (4 sets)
68Mass concreting (Cement:Sand:Jelly supplied by the contractor) 2 Nos.
69Erection ofAB Switch
70Transformer structure earthing 10ft depth - 3 nos of pipe through Earth Tubes
71Erection of Top Channel
72Bed Channel [2 nos channel] Erection
73Cross with stud for bed channel Erection
74Erection of belting angle / HG fuse angle
75Erection ofHG fuse Set
76Erection of HT LAS with jumpering and earthing
77Erection of LT LAS with jumbering and earthing
78Erection of Jumpering [HT Side]
79Transformer wiring in LT side including Jumpering Bus bar etc.
80Erection LT open type fuse unit arrangement single
81Erection LT open type fuse unit arrangementDouble
82Painting of stru. Complete excluding DT [two coat of red oxide] all metal parts(excluding cost of paint).
83Painting of stru. Complete excluding DT [one coat Alu paint, excluding cost of paint)
84Colour washing of 2 numbers structure pole [excluding cost of distember / snowsem]
85Painting name of SS at seating channel including paint.
86Painting of DT alone [excluding painting] with red oxide and double coating of aluminium paint.
87Erection of Single Pole Mounted DT Erection Work ( Including Pole Concreting & 3Nos Earth Pipe & Paintimng)
88Erection of DT metering arrangement (Materials Supplied by the Board)
89Erection of distribution Transformer /Dismantling of DT
90Upto 100 KVA
91above 100 KVA and Upto 250 KVA
92500 KVA
93Colour washing of RCC / PSC poles
94Numbering of poles including cost of paint / loc [black background and yellow letters]
95Painting of SC details in the meter board / Agl boxes / Hut SCs including paint.
96SERVICE CONNECTION
97Transporting of required materials from road side to work spot and erection of street light fixture including wiring Clamping of pipe aerial board assembling
98Transporting of required materials from road side to work spot and erection of 250 WS.V. lamp / Mercury lamp/LED Yard Light Fittingincluding wiring, clamping of pipe, serial board assembling etc.
99Fixing of street light fitting with 2 CFL/ 4 CFL
100Provision of St. Lt. switching arrangements including fixing meters, wiring, service board etc.
101Erection of hut service connection complete with / without meter including transport of 5materials from section store to work spot
102Erection/dismantling of metering set 11 KV / 22 KV/33 KV
103Fabrication Works.
104Labour charges for alteration of back clamp / stay clamp to suitable for works.
105Providing of Holes.
106All size angles / channel upto 5/8\"
107All size angles / channel above 5/8\"
108Slot holes in flat / angles / channel upto 3/4\"
109Slot holes in flat / angles / channel above 3/4\"
110Fabrication of centre support only for DT structure
111Cutting of RS Joist / Angles / MS Channels
112Welding of RS Joist / Angles / MS Channels
113GENERAL
114Set right the leaning pole in both HT & LT[ pin point ] location
115Set right the leaning pole in both HT & LT[ cut point ] location
116Resagging of lines for all sizes cut point location
117Converting pin point into cut point HT lines
118Converting pin point into cut point LT lines
119Clearing tree branches ofcoconut tree
120Clearing tree branches of Neem, tamarind, countrytree etc.,
121Releasing and Re-Erection of1 ph SC wire [during conductor or support change]
122Releasing and Re-erection 3 ph SC wire [during conductor or support change]
123Destruction of pole concerting at site.
124Retrieving grill from detoriated pole [grill separate from damaged pole]
125Re earthing of structure completely including earthpipe changing if any 3nos earth pipe
126Re examination of DT earthing ( Digging , inspection and making connection in between extg. 3nos Earth pipe )
127Guarding Arrangement :-
128Cradle guarding including earthing and earth pit excavation [railway & P&T crossing ]
129Flat guarding with 4 wire
130Split Netural Guarding
131LOADING AND UNLOADING :
132Loading of 7.5 Mtr / 8.0 Mtr RCC / PSC/ Metal Pole [per pole ]
133Loading of [ 9.14 mtr ] 9.0 mtr poles RCC /PSC Pole / Metal Pole [ per pole ]
134Unloading of PSC / RCC / Metal Poles
135TRANSPORTING FROM ROAD SIDE TO WORKSPOT
136Transport 7.5 mtrs / 8.00 mtrs of poles including R.S.Joist and Rail Poles Upto 1.0 Km
137Transport 7.5 mtrs / 8.00 mtrs of poles including R.S.Joist and Rail Poles above additional 1.0 Km or part thereof[ certified by AEE ]
138Transport of 9.0 mtr and above poles including R.S. Joist and Rail poles upto 1.0 Km
139Transport of 9.0 mtr and above poles including R.S. Joist and Rail poles upto above additional 1.0 Km or part thereof
140TRANSPORT OF LINE MATERIALS
141Transport of line Materials [ minimum 1 MT ]from sub stores to section pocket store ornear to work spot at road side by using private vehicleor vice versa excluding loading and unloading Upto 8 kms
142Transport of line Materials [ minimum 1 MT ]from sub stores to section pocket store ornear to work spot at road side by using private vehicleor vice versa excluding loading and unloading above 8 Kms and for every addl. 1 KM
143Loading/ Unloading of Line Materials
144TRANSPORT OF EQUIPEMENTS
145Transporting of Distribution Transformer/Metering set by using private vehicleload of one No.MinimumUp to 30 Km
146.Transporting of Distribution Transformer/Metering set by using private vehicleload of one No.Minimum above 30 Km for every addl .1 KM
147DISMANTLING WORKS
148Dismantling of 7.5m / 8.0m poles [RCC / PSC]
149Dismantling of 9.00m / 9.14m RCC / PSC/Rail pole, Tubular pole and all metal poles
150Dismantling stay set complete
151Dismantling of LT 1 ph \"X\" Arm / LT/HT TI Fitting
152Dismantling of LT/HT TI Fitting
153Dismantling of LT 3 ph \"X\" Arm
154Dismantlingof 3[1/2]\" V` X \" arm
155Dismantlingof Tapping channel and Guarding X Arm
156Dismantling of 11 KV strain disc/polymer disc with hardware
157Dismantling of 22 KV Pin insulator with pin
158Dismantling of 22 KVStrain disc with hardware
159Dismantling of 33 KV Pin insulator with pin
160Dismantling of 33 KVStrain disc with hardware
161Dismantlingof LT Pin insulator with pin
162Dismantlingof LT Shackle with hardware
163Dismantling of Aluminium knob
164Dismantling of Conductor7/2.59 mm ACSR, 7/2.50 AAAC including PVC cable upto 25 sqmm
165Dismantling of ConductorACSR 7/3.35mm & 7/ 3.15 AAAC including PVC cable above 25 sqmm
166Dismantling of ConductorACSR 7/4.09 mm
167SINGLE PHASE METER &3 PHASE METER
168Replacement ( Releasing & Fixing) of Single Phase Meter ( Including Transport Charges)
169Replacement ( Releasing & Fixing) of Three Phase Meter ( Including Transport Charges)
170Checking Healthiness of Agl.Meter
171Checking Healthiness of Agl.Meter1

AI Tender Summary

OUR REF NO 33102379
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 25 Lakhs
LAST DATE 30-07-2022
Authority
Authority Name Tamil Nadu Generation And Distribution Corporation Limited
Work Description Running Contract For Extension / Improvement Works In Illuppur Sub-Division In Pudukkottai Edc - 2 Pit Excavation For 7.5 Mts / 8 Mts Pole In Ordinary Soil Including Cleaning Of Site ( Each Pit ) 3 1.25 X 0.6 X 1.5M [ Ordinary Soil ] 4 Semi Rocky Soil 5 Pole Pit For 9.0M And 9.14 M Psc / Rcc / All Metal Poles ( Each Pit ) 1.25 X 0.6 X 1.83 Mtr 6 Ordinary Soil 7 Semi Rocky Soil 8 Heavy Rocky Soil Where Blasting / Cheseling Required [ Specific Approval Should Be Obtained From Concerned Ee ] 9 Stay Pit 10 In Ordinary Soil [ 0.95 X 0.6 X 1.2M ] 11 Semi Rocky Soil 12 Stay Pit In Heavy Rocky Soil Where Blasting / Cheseling Reqiured [ Specific Approval Should Be Obtained From Concerned Ee ] 13 Erection Of Poles & Stays ( Including Refilling Of Excavated Earth ) 14 Erection Of 7.5M / 8.0M Poles [ Rcc / Psc ] 15 Erection Of 9.00M / 9.14M Rcc / Psc / Rail Pole, Tubular Pole And All Metal Poles 16 Stay Set 17 Erection Stay Set Complete 18 Stay Erection Without Rod And Pit 19 Replacement Of Stay Rod Only. ( Including Stay Pit Excavation & Refilling & Erection ) 20 Replacement Of Guy Shackle Only In Existing Stay 21 Erection Of Line Materials 22 Fixing Of Lt 1 Ph X Arm 23 Fixing Of Lt / Ht Ti Fitting 24 Fixing Of Lt 3 Ph X Arm 25 Fixing Of 3 [ 1 / 2 ] V` X Arm 26 Fixing Of4 [ 1 / 2 ] V` X Arm 27 Fixing Of 5 V X Arm 28 Fixing Of Tapping Channel / Guarding X Arm 29 Providing Of Line Spacers In Lt Lines 1 Phase 30 Providing Of Line Spacers In Lt Lines 3 Phase 31 Erection Of Ab Switch With Pt Insulator & Jumpering Complete 32 Erection Of Centre Rotating Switch Ab Switch Complete 33 Fixing Of Ht Pin Insulator / Strain Disc 34 11 Kv Pin Insulator With Pin 35 11 Kvstrain Disc / Polymer Disc With Hardware 36 22 Kv Pin Insulator With Pin 37 22 Kv Strain Disc / Polymer Disc With Hardware 38 33 Kv Pin Insulator With Pin 39 33 Kv Pinstrain Disc / Polymer Discwith Hardware 40 Fixing Of Lt Pin Insulator With Pin 41 Lt Shakle With Hardware 42 Fixing Of Aluminium Knob 43 Paving Stringing And Sagging Of Conductor Including Binding Of Pin And Proper Tight [ Including Transport Of Condutor From Road Side To Work Spot ] Per Run 44 Upto 7 / 2.59 Mm Acsr, 7 / 2.50 Aaac Including Pvc Cable Upto 25 Sqmm 45 Acsr 7 / 3.35Mm & 7 / 3.15 Aaac Including Pvc Cable Above 25 Sqmm 46 Acsr 7 / 4.09 Mm 47 Above 7 / 4.09 Mm Acsr & Dog Conductor 48 For Lc Works ( All Types Of Conductor ) 49 Route Surveying Andpeg Marking Of Ht / Ltlines 50 Earthing Wiring And Connection Including Transporting Of Earth Pipe And Excavation Of Pit ] 51 Transformer Structure Earthing 10Ft Depth - 3 Nos Of Pipe Throughtubes 52 Dp Earthing Including All Works [ Double Side Earthing ] 53 Erection Of 4Th Earth Pipe Including Earthing 54 Earthing Of Poles 55 Earth Pit Masonary Work 3 Nos Earth Pits Or Using 3 Nos Concrete Tub. 56 Replacement Of Detoriated Earth Pipe Per Location 57 Concreting With Mixture 1:3:6 [ Including All Materials ] . 58 ( A ) Transformer Structure Poles Mass Concreting With Coping 0.75Mx0.5Mx1.8M Coping Material Supplied By The Contractor ( Cement =100 Kg River Sand, 40 Mm Jully Including Labour 2 Nos Of Pole In Structure ) 59 ( B ) Mass Concerting For Pole In Line0.75Mx0.5Mx1.8M 60 ( C ) Sleeve Concret For Poles In Line 0.75M X 0.5X 0.9M 61 ( D ) Sleeve Concret For Stay Set 0.3X0.3X0.75 62 Erection Of Distribution Transformer Structure Complete 63 Excavation Of Structure Pole Pits 0.9 X0.9 X 1.83 Mtr 64 Transporting Of Pole To Pit Location 2 Nos. 65 Erection Of Poles 2 Nos 66 Excavation Of Stay Pit 4 Nos 67 Erection Of Stay Set ( 4 Sets ) 68 Mass Concreting ( Cement:Sand:Jelly Supplied By The Contractor ) 2 Nos. 69 Erection Ofab Switch 70 Transformer Structure Earthing 10Ft Depth - 3 Nos Of Pipe Through Earth Tubes 71 Erection Of Top Channel 72 Bed Channel [ 2 Nos Channel ] Erection 73 Cross With Stud For Bed Channel Erection 74 Erection Of Belting Angle / Hg Fuse Angle 75 Erection Ofhg Fuse Set 76 Erection Of Ht Las With Jumpering And Earthing 77 Erection Of Lt Las With Jumbering And Earthing 78 Erection Of Jumpering [ Ht Side ] 79 Transformer Wiring In Lt Side Including Jumpering Bus Bar Etc. 80 Erection Lt Open Type Fuse Unit Arrangement Single 81 Erection Lt Open Type Fuse Unit Arrangementdouble 82 Painting Of Stru. Complete Excluding Dt [ Two Coat Of Red Oxide ] All Metal Parts ( Excluding Cost Of Paint ) . 83 Painting Of Stru. Complete Excluding Dt [ One Coat Alu Paint, Excluding Cost Of Paint ) 84 Colour Washing Of 2 Numbers Structure Pole [ Excluding Cost Of Distember / Snowsem ] 85 Painting Name Of Ss At Seating Channel Including Paint. 86 Painting Of Dt Alone [ Excluding Painting ] With Red Oxide And Double Coating Of Aluminium Paint. 87 Erection Of Single Pole Mounted Dt Erection Work ( Including Pole Concreting & 3Nos Earth Pipe & Paintimng ) 88 Erection Of Dt Metering Arrangement ( Materials Supplied By The Board ) 89 Erection Of Distribution Transformer / Dismantling Of Dt 90 Upto 100 Kva 91 Above 100 Kva And Upto 250 Kva 92 500 Kva 93 Colour Washing Of Rcc / Psc Poles 94 Numbering Of Poles Including Cost Of Paint / Loc [ Black Background And Yellow Letters ] 95 Painting Of Sc Details In The Meter Board / Agl Boxes / Hut Scs Including Paint. 96 Service Connection 97 Transporting Of Required Materials From Road Side To Work Spot And Erection Of Street Light Fixture Including Wiring Clamping Of Pipe Aerial Board Assembling 98 Transporting Of Required Materials From Road Side To Work Spot And Erection Of 250 Ws.V. Lamp / Mercury Lamp / Led Yard Light Fittingincluding Wiring, Clamping Of Pipe, Serial Board Assembling Etc. 99 Fixing Of Street Light Fitting With 2 Cfl / 4 Cfl 100 Provision Of St. Lt. Switching Arrangements Including Fixing Meters, Wiring, Service Board Etc. 101 Erection Of Hut Service Connection Complete With / Without Meter Including Transport Of 5Materials From Section Store To Work Spot 102 Erection / Dismantling Of Metering Set 11 Kv / 22 Kv / 33 Kv 103 Fabrication Works. 104 Labour Charges For Alteration Of Back Clamp / Stay Clamp To Suitable For Works. 105 Providing Of Holes. 106 All Size Angles / Channel Upto 5 / 8 107 All Size Angles / Channel Above 5 / 8 108 Slot Holes In Flat / Angles / Channel Upto 3 / 4 109 Slot Holes In Flat / Angles / Channel Above 3 / 4 110 Fabrication Of Centre Support Only For Dt Structure 111 Cutting Of Rs Joist / Angles / Ms Channels 112 Welding Of Rs Joist / Angles / Ms Channels 113 General 114 Set Right The Leaning Pole In Both Ht & Lt [ Pin Point ] Location 115 Set Right The Leaning Pole In Both Ht & Lt [ Cut Point ] Location 116 Resagging Of Lines For All Sizes Cut Point Location 117 Converting Pin Point Into Cut Point Ht Lines 118 Converting Pin Point Into Cut Point Lt Lines 119 Clearing Tree Branches Ofcoconut Tree 120 Clearing Tree Branches Of Neem, Tamarind, Countrytree Etc., 121 Releasing And Re-Erection Of1 Ph Sc Wire [ During Conductor Or Support Change ] 122 Releasing And Re-Erection 3 Ph Sc Wire [ During Conductor Or Support Change ] 123 Destruction Of Pole Concerting At Site. 124 Retrieving Grill From Detoriated Pole [ Grill Separate From Damaged Pole ] 125 Re Earthing Of Structure Completely Including Earthpipe Changing If Any 3Nos Earth Pipe 126 Re Examination Of Dt Earthing ( Digging , Inspection And Making Connection In Between Extg. 3Nos Earth Pipe ) 127 Guarding Arrangement :- 128 Cradle Guarding Including Earthing And Earth Pit Excavation [ Railway & P&T Crossing ] 129 Flat Guarding With 4 Wire 130 Split Netural Guarding 131 Loading And Unloading : 132 Loading Of 7.5 Mtr / 8.0 Mtr Rcc / Psc / Metal Pole [ Per Pole ] 133 Loading Of [ 9.14 Mtr ] 9.0 Mtr Poles Rcc / Psc Pole / Metal Pole [ Per Pole ] 134 Unloading Of Psc / Rcc / Metal Poles 135 Transporting From Road Side To Workspot 136 Transport 7.5 Mtrs / 8.00 Mtrs Of Poles Including R.S.Joist And Rail Poles Upto 1.0 Km 137 Transport 7.5 Mtrs / 8.00 Mtrs Of Poles Including R.S.Joist And Rail Poles Above Additional 1.0 Km Or Part Thereof [ Certified By Aee ] 138 Transport Of 9.0 Mtr And Above Poles Including R.S. Joist And Rail Poles Upto 1.0 Km 139 Transport Of 9.0 Mtr And Above Poles Including R.S. Joist And Rail Poles Upto Above Additional 1.0 Km Or Part Thereof 140 Transport Of Line Materials 141 Transport Of Line Materials [ Minimum 1 Mt ] From Sub Stores To Section Pocket Store Ornear To Work Spot At Road Side By Using Private Vehicleor Vice Versa Excluding Loading And Unloading Upto 8 Kms 142 Transport Of Line Materials [ Minimum 1 Mt ] From Sub Stores To Section Pocket Store Ornear To Work Spot At Road Side By Using Private Vehicleor Vice Versa Excluding Loading And Unloading Above 8 Kms And For Every Addl. 1 Km 143 Loading / Unloading Of Line Materials 144 Transport Of Equipements 145 Transporting Of Distribution Transformer / Metering Set By Using Private Vehicleload Of One No.Minimumup To 30 Km 146 .Transporting Of Distribution Transformer / Metering Set By Using Private Vehicleload Of One No.Minimum Above 30 Km For Every Addl .1 Km 147 Dismantling Works 148 Dismantling Of 7.5M / 8.0M Poles [ Rcc / Psc ] 149 Dismantling Of 9.00M / 9.14M Rcc / Psc / Rail Pole, Tubular Pole And All Metal Poles 150 Dismantling Stay Set Complete 151 Dismantling Of Lt 1 Ph X Arm / Lt / Ht Ti Fitting 152 Dismantling Of Lt / Ht Ti Fitting 153 Dismantling Of Lt 3 Ph X Arm 154 Dismantlingof 3 [ 1 / 2 ] V` X Arm 155 Dismantlingof Tapping Channel And Guarding X Arm 156 Dismantling Of 11 Kv Strain Disc / Polymer Disc With Hardware 157 Dismantling Of 22 Kv Pin Insulator With Pin 158 Dismantling Of 22 Kvstrain Disc With Hardware 159 Dismantling Of 33 Kv Pin Insulator With Pin 160 Dismantling Of 33 Kvstrain Disc With Hardware 161 Dismantlingof Lt Pin Insulator With Pin 162 Dismantlingof Lt Shackle With Hardware 163 Dismantling Of Aluminium Knob 164 Dismantling Of Conductor7 / 2.59 Mm Acsr, 7 / 2.50 Aaac Including Pvc Cable Upto 25 Sqmm 165 Dismantling Of Conductoracsr 7 / 3.35Mm & 7 / 3.15 Aaac Including Pvc Cable Above 25 Sqmm 166 Dismantling Of Conductoracsr 7 / 4.09 Mm 167 Single Phase Meter &3 Phase Meter 168 Replacement ( Releasing & Fixing ) Of Single Phase Meter ( Including Transport Charges ) 169 Replacement ( Releasing & Fixing ) Of Three Phase Meter ( Including Transport Charges ) 170 Checking Healthiness Of Agl.Meter 171 Checking Healthiness Of Agl.Meter1
Basic Detail
Tender No 0446024/2022-23
Bidding Type Tender
Location
City Pudukkottai
State Tamil Nadu
Key Dates
Publish Date 15 Jul 2022
Submission Date 30 Jul 2022
Open Date 01 Aug 2022
Finance
Tender Value 25 Lakhs
Tender Fee Ref. Documents
EMD 25000
Exemption Not Available
Document List
7ba133fa-62f9-4d81-b5d9-abdcf90d27dd.html
BOQ_285721.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 15, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 30, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Aug 01, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

7ba133fa-62f9-4d81-b5d9-abdcf90d27dd.html

xls

BOQ_285721.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders