Supply Of Chairs And Tables Supply Of Chairs And Tables At Technopark Phase I Campus , Supply Of Assembled Chairs ( Without Headrest ) ) With The Following Specifications: Castors: Twin Castors 50Mm Dia Complyingto Ansi / Bifma X 5.1 – 2002, technopark-Kerala

Supply Of Chairs And Tables Supply Of Chairs And Tables At Technopark Phase I Campus , Supply Of Assembled Chairs ( Without Headrest ) ) With The Following Specifications: Castors: Twin Castors 50Mm Dia Complyingto Ansi / Bifma X 5.1 – 2002 Standards. The Twin Wheel Castors Shall Be Injection Moulded In Pp. 2. Base: The Base Shall Be Made Of Injection Moulded Nylon Material ( Tested Prudently And Rigorously As Per Ansi / Bifma X5.1-2011 General Purpose Office Chair Standards ) And Fitted With 5 Nos Of Twin Wheel Castors 3. Gas Lift: Standard Gas Lift ( 100Mm ) Gas Lift - Class 4 Tested -Ansi Bifma Performance Standards. The Pneumatic Height Adjustment Has An Adjustment Stroke Of 95 -100 Cm As Per The Seat Height Criteria. 4. Mechanisam: 360 Degree Revolving Type, Multi Locking Synchro Mechanism With One Lever Control For Locking And Seat Height Adjustment, With Tilt Tension Adjustment. 5. Armrest: One Way Height Adjustable Armrest. The Arm Top Is Made Of Soft Molded Pu Material. 6. Backrest: The Back Shall Be Made Of Two Piece Injection Moulded Frame. The Inner Frame Shall Be Upholstered With Mesh Fabric And Mounted On The Main Assembly. Lumber Support Made Up Of Injection Moulded In Black Pp, Upholstered With Pu Foam. 7. Seat: Made Up Of 12Mm Thick Hot Pressed Ply Wood And Pu Moulded Seat Foam Upholstered With Micro Fabric Fabric: 100% Polyster-340-350 Gsm Grade. Abrasion-> 50000 Cycles Foam: Cushion With Pre Moulded Foam Of 50-55 Density In The Shape Of Plywood Density: 52 Kg / M3, Hardness-22-28 Kgf Brand : Featherlite / Wipro / Merryfair / Godrej / Steelcase , Supply At Park Centre , Supply At Second Floor Thejaswini Building, Technopark Phase I Campus , Supply Of Assembled Chairs With The Following Specification At Second Floor Thejaswini Building, Technopark Phase I Campus , Chairs With Headrest 1.Castors: Twin Castors 50Mm Dia Complyingto Ansi / Bifma X 5.1 – 2002 Standards. The Twin Wheel Castors Shall Be Injection Moulded In Pp. 2. Base: The Base Shall Be Made Of Injection Moulded Nylon Material ( Tested Prudently And Rigorously As Per Ansi / Bifma X5.1-2011 General Purpose Office Chair Standards ) And Fitted With 5 Nos Of Twin Wheel Castors 3. Gas Lift: Standard Gas Lift ( 100Mm ) Gas Lift - Class 4 Tested -Ansi Bifma Performance Standards. The Pneumatic Height Adjustment Has An Adjustment Stroke Of 95 -100 Cm As Per The Seat Height Criteria. 4. Mechanisam: 360 Degree Revolving Type, Multi Locking Synchro Mechanism With One Lever Control For Locking And Seat Height Adjustment, With Tilt Tension Adjustment. 5. Armrest: One Way Height Adjustable Armrest. The Arm Top Is Made Of Soft Molded Pu Material. 6. Backrest: The Back Shall Be Made Of Two Piece Injection Moulded Frame. The Inner Frame Shall Be Upholstered With Mesh Fabric And Mounted On The Main Assembly. Lumber Support Made Up Of Injection Moulded In Black Pp, Upholstered With Pu Foam. Height Adjustable Head Rest With 1.2 Mm Thickeness. 7. Seat: Made Up Of 12Mm Thick Hot Pressed Ply Wood And Pu Moulded Seat Foam Upholstered With Micro Fabric Fabric: 100% Polyster-340-350 Gsm Grade. Abrasion-> 50000 Cycles Foam: Cushion With Pre Moulded Foam Of 50-55 Density In The Shape Of Plywood Density: 52 Kg / M3, Hardness-22-28 Kgf Brand : Featherlite / Wipro / Merryfair / Godrej / Steelcase , Supply Of Pantry Chairs With The Following Specifications At Second Floor Thejaswini Building, Technopark Phase I Campus Chair Material - High-Grade Virgin Plastic Molded Seat And Backrest. Legs - High-Grade Stainless Steel Legsbrand: Featherlite / Wipro / Merryfair / Godrej / Steelcase , Supply Of Board Room Tables With Following Specifications , Size:- 8000Mm ( W ) X 1500Mm ( D ) X 750Mm ( H ) Table Top: Table Top Is Made Of 25Mm Thick Pre-Laminated Particle Board In E1 Grade Finish With Reverse Chamfer Edge&Pvc Edge Band Ofrehau Make And 681 Kg / M3 Density With 0.68N / Mm2 Tensile Strength, 475 Rev Abrasion Resistance ( Min ) With 6.25 Mg / 100G Dry Board Formaldehyde Content. 500Wx135d Anodised Aluminium Finish Flipup Is Considered For Wire Manager. Understructure: End Legs Are Made Ofdie Cast Aluminium In Chrome Finish. Die Cast Legs Are Connected With Crca Beams With Die Cast Connector Which Gives Weld Free Design . Beams Are Made Of 1.6Mm Crca Tube Wire Managemen:60X30x1.6Mm Thick Metal Crca Tube Leg With Concealed Junction Box With 1.2Mm Thick Crca Covers Will Provide In Middle Leg Of The Clusters To Pull Wires From Floor To Wire Tray And Flowing Of Cables From One Ws To Another Ws Will Be Through Cable Tray Of 1.2Mm Thickness Metal Crca Powder Coated Tray .Powder Coating Of Beams & Crca Tubes:60-80 Microns Thick Powder Coating After 7 Tank Process For Anti Rust And Long Life. Brand :Featherlite / Wipro / Monarch / Godrej / Steelcase , Supply Of Trainingtable With Following Specifications : , Size:- 1500Mm ( W ) X 1500Mm ( D ) X 750Mm ( H ) Table Top:Table Top Is Made Of 25Mm Thick Pre-Laminated Particle Board In E1 Grade Finish With 2Mm Pvc Edge Banding Of Rehau Make And 681Kg / M3 Density With 0.68N / Mm2 Tensile Strength, 475 Rev Abrasion Resistance ( Min ) With 6.25 Mg / 100G Dry Board Formaldehyde Content. Understructure: Legs Are Made Of Crca Round Tubs With Foldable Option And Lockable Castors. Modesty:1.2Mm Thick Perforatedcrca Sheet As Privacy Shelf: Considered Shelf Underneath The Table To Keep Bags Brand :Featherlite / Wipro / Monarch / Godrej / Steelcase , Supply Of Pantry Tables With Following Specifications : , Size:- 900Mm Diax 750Mm ( Htable Top:Table Top Is Made Of 25Mm Thick Pre-Laminated Particle Board In E1 Grade Finish With 2Mm Pvc Edge Banding Of Rehau Make And 681 Kg / M3 Density With 0.68N / Mm2 Tensile Strength, 475 Rev Abrasion Resistance ( Min ) With 6.25 Mg / 100G Dry Board Formaldehyde Content. Understructure ( X Base ) : Chrome Finished Oxidation Pipe With Polished Finish Feet And Top Foldable Mechanism.Brand :Featherlite / Wipro / Monarch / Godrej / Steelcase , Supply Of Height Adjustable Lineartableswith Following Specifications : , Size: 1500Mm ( W ) X700mm ( D ) X 650Mm -1200Mm ( H ) Type:Linear Table Top:Table Top Is Made Of 25Mm Thick Pre-Laminated Particle Board In E1 Grade Finish With 2Mm Pvc Edge Banding Of Rehau Make And 681 Kg / M3 Density With 0.68N / Mm2 Tensile Strength, 475 Rev Abrasion Resistance ( Min ) With 6.25 Mg / 100G Dry Board Formaldehyde Content. 500Wx135d Anodised Finish Flipup Is Considered For Wire Manager. Understructure: Ms Powder Coated I-Type Legs With Crca Tube Of 80 X 50 X1.6Mm Thk Incorporated With 70 X 20 X 2Mm Thk Foot And Consists Of 3 Stage Telescopic Height Adjustment. ( Powder Coating Will Be In White ) Att Mains :12Mm Magnetic Fabric Of 1050Wx300h On Metal Holding Brackets Are Considered. Motor : Using 2 Motors For Smooth Operation Legs : Crca Tube Of80 X 50 X 1.6Mm Thick With 3 Stage Telescopic Lift Control Panel: 3 Memory Preset Button . This Is Easy To Program. Up & Down Buttons For Adjusting The Height Manually. Digital Display Of Heightheight Level: Height Of The Table Can Be Adjusted From 650Mm To 1200Mm Ht. Features:Loading Capacity- 1000N.•Width- 1200Mm To 1800Mm. •Worktop Depth- 700 To 800. •Height From Floor To Worktop- 600Mm To 1200Mm.•Stroke Length- 650Mm. •Speed- 35Mm / Sec. Anti Collission Feature .•Power Consumption-•0.1Watt ( Static ) •100Watt ( Active ) •300Watt ( 100 Kg ) •Noise Level<50Db Brand :Featherlite / Wipro / Monarch / Godrej / Steelcase

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	19-07-2022	BOQ Corrigendum	Technical Bid	25-07-2022
2	25-07-2022	Date corrigendum	Date	29-07-2022
3	29-07-2022	Date Extension	Date	03-08-2022

INR 2950 /-

INR 50000.0 /-

INR 44.80 Lakhs /-