|
| 1 | Kottappuram Anganwadi Construction |
| 2 | Stone Aggregate(single size): 40 mm nominal size |
| 3 | Stone Aggregate(single size):20 mm nominal size |
| 4 | Carriage of Stone aggregate 40 mm nominal size and above |
| 5 | Carriage of Stone aggregate below 40 mm nominal size |
| 6 | Coarse sand (zone III) |
| 7 | Carriage of Coarse sand |
| 8 | Portland Cement |
| 9 | Carriage of Cement |
| 10 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 11 | Vibrator (Needle type 40 mm) |
| 12 | Sundries |
| 13 | Stone for masonry work |
| 14 | Carriage of Soling stone & masonry stone |
| 15 | Through and bond stone size 24 x 24 x 39cm |
| 16 | Cement |
| 17 | Coarse sand |
| 18 | Stone Aggregate(single size): 10 mm nominal size |
| 19 | Solid blocks of size 30x20x20cm |
| 20 | Solid blocks of size 30x20x15cm |
| 21 | Twisted steel/deformed bars |
| 22 | Carriage of Steel |
| 23 | wall form panel 1250x500 mm |
| 24 | Corner angle 45x45x5 mm 1.50 m long |
| 25 | 100 mm channel shoulder 2.5 m long |
| 26 | Double clip (bridge clip) |
| 27 | Single clip |
| 28 | M.S. Tube 40 mm dia |
| 29 | Carriage |
| 30 | Structural steel such as tees, angles, channels and R.S. joists |
| 31 | Steel |
| 32 | Red oxide Zinc chromate primer |
| 33 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 34 | Beam clamp 300-380 mm (450-1070 mm) |
| 35 | Adjustable span ESO+SI (2.35-3.40) |
| 36 | Second class kail wood in planks |
| 37 | Second class kail wood in scantling |
| 38 | Hollock ballies 125 mm diameter |
| 39 | Carriage of Timber |
| 40 | Safeda ballies 125 mm diameter |
| 41 | Mild steel sheets for tanks |
| 42 | Iron pintels including weldded pin |
| 43 | Mild steel sheets with bolts and nuts to rest on pintels |
| 44 | Mild steel hooks |
| 45 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 46 | Fine sand (zone IV) |
| 47 | Fine sand (1 part badarpur sand : 2 parts jamuna sand |
| 48 | Satna lime |
| 49 | Vitrified floor tile 50x50 cm |
| 50 | Carriage and sundries |
| 51 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 52 | Vitreous China orrisa type w.c. pan size 580 mm |
| 53 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
| 54 | 100 mm S.C.I. trap with vent heel |
| 55 | Vitreous china flat back wash basin 550x400 mm |
| 56 | 15 mm C.P.brass tap |
| 57 | C.P. brass waste 32 mm |
| 58 | C.I. bracket for wash basin and sinks |
| 59 | PVC pipe 32 mm outer dia 6Kgf/cm2 |
| 60 | PVC pipe 110 mm outer dia. 4kgf/cm2 |
| 61 | 48 mm X40 mmX1.5 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish |
| 62 | 24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish |
| 63 | Deharadun white lime |
| 64 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 65 | Dry distemper |
| 66 | water proofing cement paint |
| 67 | Synthetic enamel paint in black or chocolate shade |
| 68 | Flats up to 10 mm in thickness |
| 69 | Mild steel round bar 12 mm dia and below |
| 70 | Welding by electric plant |
| 71 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
| 72 | Average rate of mild steel round bars for reinforcements |
| 73 | Stone Aggregate(single size): 06 mm nominal size |
| 74 | Interlocking C.C. paver block (80 mm thick, M-30) |
| 75 | PVC pipe 63 mm outer dia . 6kgf/cm2 |
| 76 | Galvanised steel J or L hooks 8 mm dia |
| 77 | Bitumen washer |
| 78 | G.I. Plain washer thick |
| 79 | Precoated Aluminium Trafford sheet 0.450mm thick |
