|
| 1 | Tools ( all tools Taparia, JHALANI make) |
| 2 | D. Spanner set ( mm size 6 to 32 |
| 3 | Ring Spanner Set (mm Size 6 to 32 |
| 4 | Adjustable wrench 12” |
| 5 | Pipe wrench- 14” |
| 6 | Pipe wrench- 18” |
| 7 | Pipe wrench- 24” |
| 8 | Allenkey set (mm size) |
| 9 | Box Spanner set ( mm size ) |
| 10 | Hand grease Pump 3kg heavy duty |
| 11 | Bearing Puller 8” with three leg ( make- Taparia) |
| 12 | Bearing Puller 16” with three leg ( make- Taparia) |
| 13 | Digital Multimeter, make – Fluke, Model-17B Digital, Range -1000 VAC/DC, 600 VAC/DC |
| 14 | Clamp Meter, make Fluke, model-Fluke 319, Range- True 1000 Amp RMS AC/DC |
| 15 | Crimping Tool, size-1.5mm-16mm, make-Jainson |
| 16 | Crimping Tool, Size-25mm-400mm ( Hydrolic), make- Taparia |
| 17 | screw driver set 840 , make Taparia |
| 18 | Needle file, Size-12”, make Black-Decker |
| 19 | Flat File , Size-12”, make Black Decker |
| 20 | Half- Round file, size-12” make Black Decker |
| 21 | Mini Hack Saw frame with blades, make bosch |
| 22 | Big Hacksaw frame with blades, make-Taparia size 12\" |
| 23 | Allen key set (inch), make-Taparia |
| 24 | Nose pliers (8”) make Taparia |
| 25 | Slide Wrench (8”) make Taparia |
| 26 | Slide Wrench (12”) make Taparia |
| 27 | Combination Plier, make Taparia, 8” |
| 28 | Line Tester, make Taparia, 500V |
| 29 | Screw Driver (6”) make Taparia |
| 30 | Screw Driver (8”) make Taparia |
| 31 | Screw Driver (12”) make Taparia |
| 32 | Screw Driver (12”) Heavy Dury” |
| 33 | Box Spanner Set (6-32mm) make Taparia |
| 34 | Box spanner, Screw & Socket driver Set 46 Pics. Make Taparia |
| 35 | Soldering Iron, 25 watt, 230VAC make Corslet |
| 36 | Soldering Flux, make Corslet |
| 37 | Soldering wire, make Corslet |
| 38 | Hot Air blower, make Bosch 350 watt, 280VAC |
| 39 | Set of Screw Driver ( Taparia) SA-46 |
| 40 | Hammer Drill Machine ( Boss) |
| 41 | Neon Testermake -Taparia |
| 42 | Hammer ( 1kg) make Taparia |
| 43 | Hammer ( 2kg) make Taparia |
| 44 | Hammer (5Kg) make Taparia |
| 45 | Hammer ( 6kg) make Taparia |
| 46 | Circlip Pliar outerside 8” |
| 47 | Circlip Pliar innerside 8” |
| 48 | Earth Tester make-MECO |
| 49 | Centre Punch ‘ Taparia ‘ |
| 50 | Bearing Puller Size 100mm ‘Taparia’ |
| 51 | Bearing Puller Size 250mm ‘Taparia’ |
| 52 | Allen Key set 1.5mm to 10mm |
| 53 | Allen key 12mm |
| 54 | Allen key 14 mm |
| 55 | Allen key 16 mm |
| 56 | Ring spanner 6mm to 32 mm |
| 57 | D Spanner 6mm to 32 mm |
| 58 | Ring spanner 36mm to 41 mm |
| 59 | D spanner 36mm to 41 mm |
| 60 | Ring spanner 41 mm to 46 mm |
| 61 | D spanner 41mm to 46 mm |
| 62 | Ring spanner 46 mm to 50 mm |
| 63 | D spanner 46 mm to 50 mm |
| 64 | Singal head D spanner 50 mm |
| 65 | Singal head D spanner 55 mm |
| 66 | Singal head D spanner 60 mm |
| 67 | Singal head D spanner 65 mm |
| 68 | Ring type hammering spanner make- Saloni 36mm |
| 69 | Ring type hammering spanner make- Saloni 41mm |
| 70 | Ring type hammering spanner make- Saloni 46mm |
| 71 | Micrometer 0 to 25 mm |
| 72 | Micrometer 12 mm to 150 mm |
| 73 | Dial guage with magnet (mitutoyo) stand 0 to 10 mm |
| 74 | Master level 150 mm length (0.02/1mtr) make- mitutoyo make |
| 75 | Filler gauge 6” (0.03-1mm) |
| 76 | Filler gauge 12” (0.03 -1mm) |
| 77 | AG-4 Grinder make- Bosch |
| 78 | AG-7 Grinder make- Bosch |
| 79 | Hand Drill machine Piptal type12mm make- Bosch |
| 80 | Chiesel 6” make- Taparia |
| 81 | Round file medium¼” |
| 82 | Round file medium ½” |
| 83 | Triangle file medium 8” |
| 84 | Triangle file 12” |
| 85 | Flat file medium 14” |
| 86 | Grease geen 1 kg (hand ) |
| 87 | Grease geen 5 kg |
| 88 | Manila rope 25 mm |
| 89 | Adjusting wrench 6” |
| 90 | Adjusting wrench 8” |
| 91 | Adjusting wrench 12” |
| 92 | Pipe wrench 12” |
| 93 | Pipe wrench 18” |
| 94 | Pipe wrench 24” |
| 95 | Pipe wrench 8” |
| 96 | Allen key 19mm |
| 97 | Flat file14” polish smooth |
| 98 | H.S.S tool bit make marinda Tool bit= 1” x1”x6” |
| 99 | H.S.S Tool bit ¾”x3/4” x6” |
| 100 | H.S.S Tool bit ½” x1/2” x6” |
| 101 | H.S.S Tool bit 3/8” x3/8” x6” |
| 102 | H.S.S Tool bit ¼” x ¼” x 6” |
| 103 | Carbit Tipped Tungiten Bit 1” V shape |
| 104 | Carbit Tipped Tungiten Bit ¾” V shape |
| 105 | Carbit Tipped Tungiten Bit 1” Right hand |
| 106 | Carbit Tipped Tungiten Bit 1” Left hand |
| 107 | Carbit Tipped Tungiten Bit ¾” Right hand |
| 108 | Carbit Tipped Tungiten Bit ¾” Left hand |
| 109 | Thred gauge mm pitch and inches size |
| 110 | Outside caliper-500mm |
| 111 | Inside caliper-500mm |
| 112 | Outside caliper-1300mm |
| 113 | Inside Caliper – 1300mm |
| 114 | Dead Center Shocket no 1 |
| 115 | Dead Center Shocket no 2 |
| 116 | Dead Center Shocket no 3 |
| 117 | Dead Center Shocket no 4 |
| 118 | Dead Center Shocket no 5 |
| 119 | Oil gun ½” litter |
| 120 | Slide wrench 12” |
| 121 | Steel measuring Tape 50” ( Feet)free mans |
| 122 | Steel measuring Tape 5mtr.free mans |
| 123 | Flate file 14” make j.K Hindustan rough |
| 124 | Flate file 14” Fine J K hindustan |
| 125 | Green carbide grinder wheel size 250x25x31.75mm bush washer make CarborNDon Universal |
| 126 | Panting burush 4” or 100mm |
| 127 | Bench grinder heavy duty wheelsize= 300mmx40” bore with grinder shaft make ( Bosch) |
| 128 | Thred tap, B.S.P, H.S.S 1/8\" |
| 129 | Thred tap, B.S.P, H.S.S 3/16\" |
| 130 | Thred tap, B.S.P, H.S.S 1 1/4\" |
| 131 | Thred tap, B.S.P, H.S.S 3/8\" |
| 132 | Thred tap, B.S.P, H.S.S 1/2\" |
| 133 | Thred Die H.S.S , B.S.P 1/8\" |
| 134 | Thred Die H.S.S , B.S.P 3/16\" |
| 135 | Thred Die H.S.S , B.S.P 1/4\" |
| 136 | Thred Die H.S.S , B.S.P 3/8\" |
| 137 | Thred Die H.S.S , B.S.P 1/2\" |
| 138 | Drill (make- MIRINDA, ADDISION) H.S.S Tappr Shank Drill 2.4 mm |
| 139 | H.S.S Tappr Shank Drill 2.9 mm |
| 140 | H.S.S Tappr Shank Drill 3.25 mm |
| 141 | H.S.S Tappr Shank Drill 4.1mm |
| 142 | H.S.S Tappr Shank Drill 4.6 mm |
| 143 | H.S.S Tappr Shank Drill 5mm |
| 144 | H.S.S Tappr Shank Drill 6mm |
| 145 | H.S.S Tappr Shank Drill 7.8mm |
| 146 | H.S.S Tappr Shank Drill 8.5mm |
| 147 | H.S.S Tappr Shank Drill 10.2mm |
| 148 | H.S.S Tappr Shank Drill 12mm |
| 149 | H.S.S Tappr Shank Drill 14mm |
| 150 | H.S.S Tappr Shank Drill 15.5mm |
| 151 | H.S.S Tappr Shank Drill 17.5mm |
| 152 | H.S.S Tappr Shank Drill 19.5mm |
| 153 | H.S.S Tappr Shank Drill 21mm |
| 154 | H.S.S Tappr Shank Drill 24mm |
| 155 | Drill socket Taper shank 1No, 2No, 3No |
| 156 | Roller Grooving Tool with Tool holder 35 Deg |
| 157 | Roll Grooving Tool withHolder 450 Digri |
| 158 | Roller Grooving Tool with Holder 500 Digri |
| 159 | MENCHEETE Grooving Tool 06mm |
| 160 | Carbide bit 35 Digri with Brazing Size 40x40x300mmK-20 |
| 161 | Carbide bit 45 Digri with Brazing Size 40x40x300mm K-20 |
| 162 | Carbide Bit 50Digri with Brizing Size 300x40x40 K-20 |
| 163 | Carbide bit 1 ½” V shape with Brizingsize 40x40x300mm |
| 164 | Carbide Bit 1 ½” Right Hand |
| 165 | Carbide Bit 1 ½” LeftHand |
| 166 | All Make ( MIRINDA or ADDISION) Drill 3mm Straight Shank |
| 167 | Drill 4.1mm Straight Shank |
| 168 | Drill straight Shank size 5mm |
| 169 | Drill straight Shank size 6.8mm |
| 170 | Drill straight Shank size 8mm |
| 171 | Drill straight Shank size 8.5mm |
| 172 | Drill straight Shank size 10.2 Mm |
| 173 | Drill straight Shank size 12mm |
| 174 | Drill straight Shank size 14mm |
| 175 | Drill straight Shank size 15.5mm |
| 176 | Threading Die Nut Totam make size 5mm |
| 177 | Threading Die Nut Totam make Size 6mm |
| 178 | Threading Die Nut Totam make Size 8mm |
| 179 | Threading Die Nut Totam make Size 10mm |
| 180 | Threading Die Nut Totam make Size 12mm |
| 181 | Threading Die Nut Totam make Size 16mm |
| 182 | Threading Die Nut Totam make Size 18mm |
| 183 | Threading Die Nut Totam make 20mm |
| 184 | Threading Die Nut Totam make 24mm |
| 185 | Allen Key 19mm |
| 186 | ODD leg Caliper 12” |