}

Construction Of Toilet Blocks At Bali Sahi Rehabilitation Sites J-1 To J-6 For Rehabilitation And Resettlement Of Persons Affected By The Redevelopment For Expansion Of Taladanda Canal Road ( Both Side ) From Ranihat Bridge To Nh-16 , Cuttack-Odisha

Cuttack Municipal Corporation has published Construction Of Toilet Blocks At Bali Sahi Rehabilitation Sites J-1 To J-6 For Rehabilitation And Resettlement Of Persons Affected By The Redevelopment For Expansion Of Taladanda Canal Road ( Both Side ) From Ranihat Bridge To Nh-16 . Submission Date for this Tender is 25-07-2022. Toilet Bathroom Tenders in Cuttack Odisha. Bidders can get complete Tender details and download the document.




Tender Notice

33099001
Construction Of Toilet Blocks At Bali Sahi Rehabilitation Sites J-1 To J-6 For Rehabilitation And Resettlement Of Persons Affected By The Redevelopment For Expansion Of Taladanda Canal Road ( Both Side ) From Ranihat Bridge To Nh-16
Open Tender
Indian
Odisha
Cuttack
25-07-2022

Tender Details

Construction Of Toilet Blocks At Bali Sahi Rehabilitation Sites J-1 To J-6 For Rehabilitation And Resettlement Of Persons Affected By The Redevelopment For Expansion Of Taladanda Canal Road ( Both Side ) From Ranihat Bridge To Nh-16

Key Value

Document Fees
INR 7080 /-
EMD
Refer document
Tender Value
INR 41.84 Lakhs /-

BOQ Items

Name of Work :Construction of Toilet Blocks at Bali Sahi rehabilitation Sites J-1 to J-6 for Rehabilitation & resettlement of Persons affected by the redevelopment for expansion of Taladanda Canal Road (Both side) from Ranihat Bridge to NH-16
Sl. No. Item Description
1Earth work in excavation of foundation in all kinds ofsoil within the initial lead and lift including dressing and levelling the bed and depositing the excavated materials away from the work site etc. all complete as directed by the Engineer-in-charge.
2b) Additional Depth-
3Filling foundation and plinth with Sand well watered and rammed including cost,conveyance and royality of sand etc complete.
4Supplying all labour,materials,T&P for Cement Concrete (1:4:8) in foundationusing 4 cm size hard granite Hand Brokenmetal including cost of materials,royalty & conveyance charges with watering,curing all complete as per direction of Engineer-in-charge.
5Supplying all labour,materials & T&P for Brick masonary with Fly Ash bricks in Foundation & Plinth having C.S not less than 35 kg/Cm2 in Cement Mortar(1:6) including watering and curing etc complete as per direction of Engineer-in-charge.
6Supplying all labour,materials & T&P for Cement concrete M-20 for R.C.C works using 12 mm size hard granite crusher broken chips including all cost of materials,labour,royalty & conveyance charges with watering,curing for the required period etc complete as per direction of the Engineer-in-charge.a) Grade Beam
7b) Lintel
8c) Roof slab
9Providing Centring & shutteringfor RCC work including cost conveyance of materials and labours etc complete. A) Grade Beam
10b ) Lintel
11c ) Roof Slab
12Supplying ,fitting and placing uncoated HYSD bar reinforced as per drawing and technical specification inclluding cost ,conveyacnce and all taxes of steel and binding wire etc complete.
13Supplying all labour,materials & T&P for Brick masonary with First class Fly Ash Brickin Superstructre having C.S not less than 35 kg/Cm2 in Cement Mortar(1:6) including watering and curing etc complete as per direction of Engineer-in-charge.
14Supplying transporting fitting and fixing of MS windows and doors as per approved drawing and design in cluding one coat of primer including all cost T&P etc complete as per direction of the Engineer in charge.
15Providing 16mm thick cement plaster in Cement mortar (1:6) Cement plaster including cost conveyance of materials etc complete
16Providing 12mm thick cement plaster in Cement mortar (1:6) Cement plaster including cost conveyance of materials etc complete
17Supplying all labour,materials for Fixing Anti skid tiles in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete of item of work as per the direction of Engineer-in-charge.
18Supplying all labour,materials for Fixing tiles to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing & polishing complete of item of work as per the direction of Engineer – in Charge.
19White washing one coat with cost of all labour & materials etc complete.
20Finishing walls with water proofing Weather Coat two coats of approved shade on new work to give an even shade including cost of brushes and putty, as per the direction of the Engineer-in-charge.
21Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x1.50mtr. Deep soak-way pit with dry brick walling up to 1.10mtr. height and brick work with cement mortar (1:6) for 0.45mtr. height of wall at top,cement plaster (1:3) inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 40mm.thick R.C.C. perforated slab,50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing.
22Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design all complete.
23Cutting Hole in 250mm to 375mm thick Brick Wall for taking 110mm/160mm PVC pipe and mendig good to damages after completion of Work etc. Complete.
24Supplying all materials,labour and T&P for Cutting holes through existing brick work including makinggood the same in cement mortar (1:4) for takingGI/PVC pipes and fittings etc all complete as per specification.
25Cutting Groove on Brick Wall for taking Water Supply Pipe lineand mendig good to damages after completion of Work etc.
26Suppling all materials, labour, t&p for FixingWater Closet (Indian Pattern W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification.
27Suppling all materials, labour, t&p for FixingWater Closet (European pattern W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification.
28Seat Cover
29Supplying all materials, labour and T&P and fixing to walls,ceiling and floor unplasticized PVC pipes conforming to IS.4985 of Sch-80 the following nominal diameter with fittings and clamps including testing as per specification all complete. A) 25mm dia PVC Pipe-
3020mm dia PVC Pipe
3115mm dia PVC Pipe
32Supplying all materials, labour and T&Pfor fittingfixing of following types of P.H. Fittings etc. all complete.i)15mm CP long body tap-
33ii) 15mm dia C.P short body tap
34iii) 125mm dia C.P Grattings
35iv) 25mm dia pvc ball cock with rod
36vi) 15mm dia CP conceal stop cock
37vii) CP Shower (Over Head)
38Supplying all materials,labour and T&P for fixing 10ltr capacity PVC low level cistern with a pair of PVC brackets complete with fitting such as siphonic arrangement,15mm. nominal size brass/PVC ball valve with polythene float chromium plated brass handle, unions and couplings for connection with inlet, outlet and over flow pipes, 32mm.dia. PVC long flush bend, 12mm.dia. PVC inlet connection pipe,15mm CP angle cock including cutting holes and making good the same and connecting the flush bend with cistern and closet and the inlet pipe with supply main etc.all complete as per specification.
39Supplying all labour, t&p for Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete.i) 25mm dia fullway valve
40Supplying all materials,labour, T&P for fitting & fixing U PVC S.W.R pipes(4kg/cm2) and fittings of the following outside diameter including jointing with approved solvent cement by non-heat application method testing as per specification with lead of all materials to site.i)110mm dia pvc pipe
41ii) 110mm dia U. P.V.C door Tee
42iii) 110mm dia U. P.V.C door bend
43iv) 110mm dia P.V.C offset
44v) 110mm diaP.V.C clamp
45vi) 110mm diaP.V.C cowl
46vii) 110mm diaP.V.C socket
47Supplying all materials labour T&P for Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge
48Dewatering of Waste water from drain inlet to out let by deploying 5 HP diesel pumpset including supplying fuels for running and fixing at position etc all complete as per the direction of the Engineer in charge.
49Removing the excavated materials from site by mechanical means with loading and unloading the same within 5km away from site.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail