Construction Of Primary Health Centre Building At Hareshwar, Taluka - Shrivardhan Dist. Raigad
Tender Value
4.08 Crore
Estimated cost
Bid Submission
20 Jul 2022
0 days left
EMD
4.08 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
shrivardhan → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Primary Health Centre Building At Hareshwar, Taluka - Shrivardhan Dist. Raigad
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Jul-2022 | Date | Fee | 20-Jul-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Item No.1:-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingthe excavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingas directed,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 2 | Item No.2:- Excavation for foundation in Hard murum including removing the excavated material upto a distanceof50 metresbeyondthebuildingareaandstackingandspreadingasdirected, dewatering,preparingthebed forthefoundationandnecessarybackfilling,ramming, wateringincludingshoringand struttingetc. complete. (Lift from1.5 to3.0m.) By Mechanical Means |
| 3 | Item No.3 :-Providingdry/trap/granite/quartzite/gneissrubblestonesoling15cmto20cmthick including hand packing and compacting etc. complete. |
| 4 | Item no.4:- Providing Pre-constructional Anti termite treatment by treating the bottom surface and the sides of excavation in soil with the plinth beams at the rate of 3 litres of emulsion concentrate of one percent concentration of chlorpyrifos 20% F.C. (i.e. by diluting 5 ltr. of chlorpyrifos 20% EC with 95 ltr. of water) ISI approved conforming as per I.S. 8944 & I.S. 6313 (Part II 1981) and spraying by high volume sprayer per square metre surface area with ten years guarantee bond etc.complete. |
| 5 | Item No5:- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automaticmicro processor based PLC with SCAD Aenabledreversible Drum Type mixer/ concrete Batch mixplant (Panmixer) etc.complete. With fine aggregate (Crushed sand VSI Grade). |
| 6 | Item No.6:- Providing and casting in situ cement concrete M20 of trap metal for R.C.C.. work like raft, grillage, strip, foundations and footing of R.C.C. Columns and steel stanchions, including bailing out water manually, centering, formwork, compacting, finishing and curing etc. complete. (Excluding steel reinforcement) |
| 7 | Item No.7:- Providing and casting in situ cement concrete M20 of trap metal for R.C.C.columns as per detailed designs and drawings or As directed by Engineer-In-Charge., including centering, formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement) |
| 8 | First Floor |
| 9 | Item No.8:- Providing and casting in situ cement concrete M20 of trap metal for R.C.C. Beams and Lintels as per detailed drawings and designs or as directed by Engineer-In-Charge., including centering formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement.) |
| 10 | First Floor Beam |
| 11 | Item No.9:- Providing and casting in situ cement concrete M20 of trap metal for R.C.C. chhajja as per detailed designs and drawings, including centering, formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement) |
| 12 | First Floor |
| 13 | Item No.10- Providing and casting in situ cement concrete M20 of trap metal for R.C.C. Slabs and landings of all thickness as per detailed drawings and designs, including centering, formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement) |
| 14 | First Floor Slab |
| 15 | Item No.11:- Providing and casting in situ cement concrete M20 of trap metal for R.C.C. waist slabs, steps and parapet as per detailed drawings for staircases, including centering, formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement) |
| 16 | First Floor |
| 17 | Item No. 12 :- Providing and casting in situ cement concrete M20 of trap metal for R.C.C. pardi 75mm thick, including centering formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement) |
| 18 | Item No. 13 :- Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing andcuring etc. complete. (withreversible drum typemixer/ concrete batch mix plant (pan mixer)with SCADA |
| 19 | Item No 14 :- Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - II Material |
| 20 | Item No.15 :- Providing and laying in-situM30 Grade unreinforced plain cement concretepavementover a prepared sub base with 43 grade cement , coarse and fine aggregate( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradationas per Table 600-3 of MORTH Specification2013,mixedinabatchingandmixingplant/nontiltingmixerandWeighbatcher asper approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and gradesas directed by Engineer-in-charge and curingby curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top withdepth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. |
| 21 | Item No.16:-Providing and fixing in position TMT steel bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete |
| 22 | First Floor |
| 23 | Item No. 17 :- Providing Second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls & external walls, including bailing out water manually, striking joints on unexposed faces, racking out joints on exposed faces and watering etc. complete.. |
| 24 | Item No.18:- Filling in plinth and floors with approved excavated materials in 15cm. To 20cm. layers including watering and compaction complete. |
| 25 | Item No19:- Filling in plinth and floors with contractor\"s murum in 15 cm to 20 cm layers including watering, compaction etc. complete. |
| 26 | Item No.20 :- Providing Second Class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure, including striking joints, racking out joints, watering and scaffolding etc. complete. |
| 27 | First Floor Brick work |
| 28 | Item No. 21 :- Providing Second Class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6mm diameter / 2 hoop iron strips 25mm x 1.6 mm painted with anticorrosive paint at every third course properly bent and bonded at ends, scaffolding, racking out joints and watering etc. complete. |
| 29 | First Floor |
| 30 | Item No.22:- Providing internal cement plaster 12 mm thick in a single coat, in cement mortar 1:4 without neeru finish to concrete or brick surface in all positions including racking out joints, scaffolding and curing etc. complete ( For Finished Side) |
| 31 | Internal Plaster for First Floor |
| 32 | Item No.23:- ProvidingwaterproofbeddingforflooringofBath andWC 25mmthickin C.M.1:3including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee |
| 33 | Item No.24:- ProvidingwaterproofplasterinW.C.andbath 12mmthickfordadoincementmortar1:3withneat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles) (As directed by Engineer in Charge) |
| 34 | Item No. 25 :- Providing internal cement plaster 20 mm thick in two coat,in cement mortar 1:4 without neeru finish to brick masonry or concrete surface in all positions. |
| 35 | First Floor |
| 36 | Item No. 26 :- Providing internal cement plaster 6mm thick in a single coat 1:3 without neeru finish to concrete surface in all position including scaffolding and curing etc. complete.. |
| 37 | First Floor |
| 38 | Item No. 27:- Providing neeru finish to plaster surface in all position including scaffolding and curing etc. complete. |
| 39 | First Floor |
| 40 | Item No.28:-Providing sand face plaster externally in two coats using approved screened sand in all positions, including providing base coat of 15 mm thick in cement mortar 1:4 mixing approved water proofing compound at the rate of 1 kilogramme / 50 kg ofcement and curing the same for not less than two days and keeping the surface of base coat rough to receive the sand faced treatment 8 mm thick in cement mortar 1:4 and finishing the surface by taking out grains and curing for 14 days including preparing the surface, watering and scaffolding etc. complete.. |
| 41 | First Floor |
| 42 | Item No.29:- Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / OceanBrown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing,etc. complete. |
| 43 | First Floor |
| 44 | Item No.30:- Providing and fixing partitions made up of CCTW frame of size 75 mm x 50 mm at 60 cm c/c with 9 mmthick commercial ply and 4mm thick veneer on both sides with French polish etc. complete. |
| 45 | Item31:Providing and laying in position fiooring of telephone black/ Amba White/ Cat bary brown/ RBI red/Ocean Brown granite stone of approved shade and size 18mm to 20mm thick on a bed of 1: 6 cement mortar including neat cement float, striking joints, pointing in cement morter 1:3,curing and cleaning complete. |
| 46 | Item 32 :-Providing and laying telephone black/ Amba White/ Cat bary brown/ RBI red/ Ocean Brown granite stone18mm to 20mm thick for door frames/dado & window boxing) on a bed of 1: 6 cement mortar including filling joints with polymer base filer nosing the sharp edges wherever necessary,curing and cleaning complete. (for sills, jams,door frames & window boxing) (for dado ) |
| 47 | Item No. 33 :- Providing and laying rectified & vitrified mirror finish decorative type tiles of size 600 mm x 600 mm x 10 mm thick of approved quality, make, shade and patternfor flooring in required positionliad on a bed of1:4 cement morterincluding neatcement float, filling joints with cement slurry, curing and cleaning etc. complete. |
| 48 | First Floor |
| 49 | Item 34:-Providingandlayingceramictilesof havingsize30cm.x30cm.andconfirmingto corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 50 | First Floor |
| 51 | Item No.35:- Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cmx30 cm and confirming to IS 15622-2006 (Group-BIIA) for anti skid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.. |
| 52 | First Floor |
| 53 | Item No.36:-Providing and fixing machine cut polished 18mm to 20mm thicktelephone black/ Amba White/ Cat bary brown/ RBI red/ Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding ana three grooved line for the treads on a bed of 1: 4 cement mortar including float filling joints withneat cement slurrycuring, polishing and cleaning etc. complete. |
| 54 | First Floor |
| 55 | Item 37:- Providing and laying precast polished chequered colour cement tiles of size 20 x 32 and 20 mm thick for treads and riser of steps and staircase with nosing of treads moulded as per drawing or as directed on bed of 1:4 cement mortar including neat cement float, filling joints with cement slurry mixed with approved shade of pigment to match the colour of tiles, curing, polishing and cleaning etc. complete. |
| 56 | Item No.38:- Providing and fixingfor Kitchen platformof polished black Kadappa stone ofapproved type and design 40 mm thick in cement mortar 1:4, including providing and fixing border patti on front edge, filling joints, curing, cleaning etc. complete.. |
| 57 | First Floor |
| 58 | Item No.39:-Providing and fixing machine cut mirror polished 18mm to 20mm thicktelephone black/ Amba White/ Cat bary brown/ RBI red/ Ocean Brown granite stone partitions with rounding the edgescuring and cleaning etc. As directed by Engineer Incharge |
| 59 | First Floor |
| 60 | Item No.40:- Providing and fixing shutter to wall cupboard made from 12 mm thick teak wood particle board and face with approved colour laminated face bonded with phenol formaldehyde synthetic resin B.W.P.. grade, including lipping, beading, iron oxidized fixtures and fastenings and painting primer one coat etc. complete.(D.S.R. I/P 17/54.As directed by Engineer Incharge |
| 61 | Item No.41:- Supplying and fixing in position anodized extruded modular aluminium section three track sliding windows mounted on rectangular frame of size 63 x 38 x 2.00mm thick (1.054 kg/Rmt.) made up of two/three track drain bottom section of size 61 x 45 x 1.3mm thick (1.055 kg/Rmt.) and top and sides sections of size 61 x 31 x 1.3mm thick (0.659 kg/Rmt.). The shutter should be of bearing bottom of size 40 x 18 x 1.2mm thick (0.417 kg/Rmt.) top member of size 40 x 18 x 1.20mm thick (0.475 kg/Rmt.) Interlocking section size of 43 x 27x 1.30mm thick (0.558 kg/Rmt.) and handle section of size 43 x 18 x 1.30mm thick (0.424 kg/Rmt.) selected quality 5.5mm thick clear glass to be fixed in shutter with neoprene gasket with approved quality PVC rollers necessary locks handles PVC lining and wooden encasement wherever necessary etc. complete as directed by Engineer in charge. (D.S.R.2012-13,I/P=48/74) |
| 62 | First Floor |
| 63 | Item No.42:- Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80x38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. (D.S.R.2012-13,I/P=39/71) |
| 64 | FirstFloor |
| 65 | Item No. 43 :-Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150Kilogramcapacity , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length aluminium tower bolts, 150mm dia. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc.complete |
| 66 | FirstFloor |
| 67 | Item No.44:-Providing and fixing solid core flush door shutterin single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brassmortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. |
| 68 | FirstFloor |
| 69 | Item No. 45:-Providing and fixing 30mm thick SOLID PANEL PVC INTERNAL DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for stiles ,top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat molded PVC channel of size 30 x 100mm forming stiles, and 5mm thick, 125mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and 15mm (5mm x 3) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 10 mm thick prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent cement adhesive. including stainless steel fixtures and fastening Complete as per direction of Engineerincharge,manufacturer\"sspecification and drawing |
| 70 | FirstFloor |
| 71 | Item No.46:-Providing and fixing mild steel grill work for windows, ventilators weighing 15.00 kg per Sq.M. as per drawing, including necessary fixtures, welding and painting with one coat of anti-corrosive paint etc. complete. |
| 72 | FirstFloor |
| 73 | Item No.47:- Providing and Fixing mat finish stainless steel (of 302 grade ) railing with toppipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer isnecessarybefore use) |
| 74 | FirstFloor |
| 75 | Item No.48:- Providingandfixing40mmdiameterand1.5mmthickStainlesssteelhandrailinginS.S.304Grade includingfabricating,fixtures,errecting,necessarywelding,grinding,finishing, buffing to stainless steel pipe etc. complete |
| 76 | ItemNo.49 :-Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mmthick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete |
| 77 | FirstFloor |
| 78 | ItemNo.50:-Providing and fixing \"Anglo Indian type\" white glazed (as per IS Std.) earthenware water closet pan with bekelite seat and lead with chromium plated brass hinges including uPVC soil and vent pipe upto the outside face of the wall and 100 mm dia. UPVC plug bend, 10 litre UPVC low level flushing cistern, 32 mm dia. UPVC flush pipe with fittings and clamps,20 mm dia. UPVC over flow pipe with mosquito proof coupling, G.I.chain and pulley painting of cistern and exposed pipe and cutting and making good to the walls and floor, testing etc. complete. (Prior approval of sample and brand, by Ex. Engineer is necessary before use.) |
| 79 | FirstFloor |
| 80 | ItemNo.51:- Providing and fixing European type coloured glazed (as per IS Std.) earthenware water closet pan with Bekelite seat and lid with chromium plated brass hinges and rubber buffers including UPVC soil and vent pipe upto the outside face of wall, 10 litre UPVC low level tank flushing cistern, 32 mm. dia. UPVC flush pipe with fittings, and clamps 20 mm dia. UPVC over flow pipe with mosquito proof couplings, pointing to exposed pipe and cutting and making good to the wall and floor testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use.) |
| 81 | FirstFloor |
| 82 | ItemNo.52:- Providing andfixing White GlazedEarthenware full stall type Urinal withP.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall |
| 83 | FirstFloor |
| 84 | Item No 53:-Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55x40 cm.size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPVC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. (D.S.R. I/P= 27(a)/93) R.A.No.21 Specification No.Bd-V-30/Page 565 |
| 85 | FirstFloor |
| 86 | ItemNo.54:-Providing and fixing Steel sink of size 60x45x25 including all connections of G.I.supply and UPVC waste pipe and trap upto outside face of wall, cold water chromium plated screw down bib tap, rolled steel or C.I.brackets, rubber plug and brass chain, stop tap, making good the damaged surface, chromium plated bottle trap testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.) DSR I/P30b/94 Spec. No.Bd-V-31 Page no 566 |
| 87 | FirstFloor |
| 88 | Item No. 55:-Providing and fixing Glass shelf 125 mm wide and 60 cm long with necessary chromium plated brackets, providing teak wood gutties etc. complete |
| 89 | Item No. 56:- Providing and laying on walls / ceiling / floors 15 mm diameter approved Medium type. Galvanized Iron pipe having embossed at every meter the ISI mark and name of manufacturer, having 15 mm outer diameter and 1.27 kilogramme per metre weight with screwed sockets, joints, and necessary galvanized iron fittings such as backnuts, elbows, bends, tees, reducers, enlargers, plugs, etc. including necessary drilling in holes in walls/slabs etc. and remaking good the demolished portion to restore the same in original condition neatly and applying primer and two coats of oil painting including necessary scaffolding including removing existing pipe if necessary & conveying & stacking in P.W.D.. chowky or as directed etc. complete. (D.S.R.I/P=2a)/84) Specification No. Bd-V-5/Page-551 a. 15mm dia. |
| 90 | c. 25 mm dia. |
| 91 | d. 32mm dia |
| 92 | First Floora. 15mm dia. |
| 93 | c. 25 mm dia. |
| 94 | d. 32mm dia |
| 95 | Item No.57:- Providing and fixingscrew down bib/stop tap of brass of approved quality and make, including necessary sockets, union nut, testing etc. complete. |
| 96 | FirstFloor |
| 97 | Item No.58:- Providing and fixing brass half turn 25mm dia steel with cromium plating flushing cock including necessary fitting etc. complete. |
| 98 | FirstFloor |
| 99 | Item No.59:- Providing and fixing 10 cm dia. PVC Nahani Trap fixed with PVC grating, PVC plug bend and piece of PVC pipe upto plug bend, scaffolding etc. complete. |
| 100 | FirstFloor |
| 101 | Item No.60:-Providing and fixing in position unplasticized poly venyl chloride (UPVC) ultra voilet rays stabilised 110 mm outer diameter rain water pipe conforming to I.S. 4985 and I.S. 13592, including necessary fittings, such as UPVC grating, bends, with door, UPVC clamps, over mild steel bracket m.s. flat of 40mm.wide and 3mm. thick on walls, horse shoes at bottom, rubber ring and making connections water tight with solvent cement including making holes in masonary concrete, redoing the same in cement mortar 1:3, curing, testing etc. complete. |
| 102 | FirstFloor |
| 103 | Item No.61:- Providing and fixing UPVC, Soil vent / waste SWR pipe conforming to I.S. - 13592, and I.S. - 4985 to withstand continous internal hydraulic pressure of 4 kg/cm2 including necessary fittings, such as bends, tees, single junctions, double junctions and joining with rubber rings and lubricants, over mild steel bracket m.s. flat of 40mm.wide and 3mm. thick on walls or laying in ground including necessary excavation, laying, refilling the trench testing etc. complete. |
| 104 | 110 mm |
| 105 | FirstFloor |
| 106 | 110 mm |
| 107 | Item No.62:- Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, BrickMasonry, plastering from inside and airtight 75 mm thick R.C.C. cover medium duty 100Kilogrametc.complete. |
| 108 | Item No.63:- Providing soak pit of size 120 x 120 x 120 cm including excavating and filling with brick bats. charcoal as per drawing etc. complete. |
| 109 | Item No.64:-Providing and fixing chromium plated Towel Rails 75cms. long, 16mm dia. and of approved quality fixed on chromium plated bracket including providing teak wood gutties in masonry etc. complete. |
| 110 | First Floor |
| 111 | Item No.65- Providing and fixing 450 x 550 mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. |
| 112 | First Floor |
| 113 | Item No.66- Providing and fixing H.D.P container one piece moulded water tank made out oflowdensitypolythylerand builtcorrugationincludingofdeliveryuptodestination hoisting andfixing of accessories such as inlet,outlet overflow of alltanks capacityabove 1000 to 20,000 litres |
| 114 | Item No.67- Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 115 | Item No.68:- Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc. complete. |
| 116 | First Floor |
| 117 | Item No.69:-Providingand applyingtwocoatsof exterioracraylicemulsion paintconfirmingto corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces includingcleaning,preparingthe plastersurface,applyingprimercoat,scaffoldingif necessary , and watering the surface for two days etc |
| 118 | First Floor |
| 119 | Item No.70:- ProvidingandfixingheavydutyinterlockingconcreteColouredpavingblocksof80mm thickness of having a strength of 300 Kilogram/Sq.cm. of approvedquality andshape ona bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc.complete |
| 120 | Item No.71:- Providingandfixingreinforcedcementconcrete coverofsize90cm x45cm withframe overinspection chamber etc. complete. Medium duty (140 Kilogram) |
| 121 | Item No.72:- Providing,fabricatingand erecting atsiteofworkthetubularsteelstructure(shed)asper standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundationbolts, base plates, nuts and bolts,weldingwhereverrequiredetc. asperdetailed drawinginclusiveofonecoatof anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number : As directed by Engineer-in-charge. |
| 122 | Item No.73:-Providing and fixing of colour coated Zinc aluminium ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallichotdipcoatedwithAluminium-Zincalloy(55%aluminiumm43.4%zinc1.6%silicon)with COLORBOND ( R ) steel quality super durable polyster paint coat ( withinorganicpigment).Thepaint shallhave atotalcoatingthicknessofnominal35um, comprising of nominal 25um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center.Theendribshallbedesignedforanti-capacitygroove.andreturnleg.Thefeed materialshouldhave coilmanufacturersproduct detailsmarked aregular interval.including fastenerswith min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight ofprofile 4.52 Kilogram/Square Metre)900 mm girth (Surface Width). For First Floor |
| 123 | Item No.74:- -Providing and fixing plain zinc sheeting of 1.00mm thickness (20 B.W.G.) over ridge, hip or valley for galvanized corrugated iron sheet roofing, including fastening with galvanized iron screws and bolts and bitumen washers as per drawing etc. complete. For First Floor |
| 124 | Item No75:- Dewatering the excavated trenches and pools of water in the building area by using pumps and other devices including desposing of water to safe distance as directed |
| 125 | Item No.76:- Providing & fixing in position UPVC, Ultra Voilet stabilised a&b outer diameter cowl dome confirming I.S. 4985 including making joints with solvent / cement etc. complete. |
| 126 | Item No.77:-Providing and fixing collapsible steel gate in two leaves with channel pickets, pivoted flat bars, including top and bottom guide rollers, stoppers, handles, all fittings and accessories, locking arrangement and applying one coat of red lead primer etc. complete. |
| 127 | Item No.78:-Providing and fixing 25 mm thick marble tablet of size and description as per detailed drawings inclduing engraving the description,filling the lead, moulded marble 1:2 cement mortar border etc.complete |
| 128 | Item No.79:-Quality Control Testing Rate For brick water Absorption(set of 5 brick),Compresive Strength, ( set of5 bricks), Efflorscence (set of 5 bricks) |
| 129 | Item No.80:- Quality Control Testing Rate Forcompressive strength c.c. cube (Set 3 cubes) |
| 130 | Item No.81:- Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness. |
| 131 | Item No.82:- Water Absorption test for aggregate. |
| 132 | Item No.83:- Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.) |
| 133 | Item No 84:- Reimbrsement of royalty charges if contractor provides orignal royalty challan from revenue department. |
| 134 | Add 12 % For GST |
| 135 | Add 0.5% For Insurance |
AI Tender Summary
Tender Timeline
Jul 14, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 21, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender