Construction Of Pipe Water Supply Scheme At Galdev / Bhogavali Mura, Tal. Jaoli, Dist- Satara
Tender Value
20.30 Lakhs
Estimated cost
Bid Submission
22 Jul 2022
0 days left
EMD
20301
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jaoli → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Pipe Water Supply Scheme At Galdev / Bhogavali Mura, Tal. Jaoli, Dist- Satara
BOQ
| Sl. No. | Item Description |
| 1 | SUB WORK NO.1 -Pumping machinary |
| 2 | Item No. 1 - Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding.Pump shall be suitable fopr various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415 V+/- 10%, Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraullc thrust.The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer\"sdesign.Antithrust stream lined non return valve shall be provided with the pump 3 m. Submersible copper conductor cable, in single/double run and 2 pair of erection clamp 65 mm width 10 mm thick shall be provided with each pump. |
| 3 | (A) 5.00 HP Submerssible Pumpset |
| 4 | Item No. 2 - Providing & fixing valves of following dia. Including all taxes central & local transportationall matrial & labour charges etc. comp. |
| 5 | (A) 65mm dia Sluice Valve |
| 6 | (B) 65 mm dia Reflux Valve |
| 7 | Item No. 3 - Providing & Supplying & layingISI mark GI Pipe of 65 mm dia GI med.class and dia including all local and central taxes, octroi, inspection charges transportation to stores all labour worketc. complete |
| 8 | Item No. 4- Providing ISI mark GI Bend of 65 mmclass and dia including all local and central taxes, octroi, inspection charges transportation to stores etc. complete (IS- 1239-2004) |
| 9 | Item No. 5- Providing & fixing MS flanged specials including all matrial & labour charges etc. comp. |
| 10 | Item No. 6 :- L.T. Control Panel Board - Designing, Providing , Errecting, Testing & Commissioning with Satsfactory Test & Trial ofVarious Panel Boards as per detailed specifications. |
| 11 | 1) MS sheet fabricated box for panel board |
| 12 | 2) Self Locking arrangement |
| 13 | 3) Marine water proof plywood |
| 14 | 4) ELCB 63Amp 4 Pole |
| 15 | 5) Volt Meter |
| 16 | 6) Ammeter |
| 17 | 7) Capacitor polypropylene condenser |
| 18 | 8) Pilot Lamp Set |
| 19 | 9) DOL starter |
| 20 | 10) Metal clad TPN switch 63 Amp |
| 21 | 11) Iton meatclad change over switch 63Amp |
| 22 | 12) EarthingGI Plate 0.6 x 0.6 x 0.6, charcoal |
| 23 | Item No. 8 :-Cables - Providing & Fixing Submersible cable 3 core 6 Sq. mm |
| 24 | SUB WORK NO.2- Gravity main |
| 25 | ITEM NO.1- Providing & Supplying in standard length ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of coupler as per IS specification no. 4985/ 1988 offollowing dia.including all taxes central & local, transportation, loading unloading stacking the same in closed shed duly protected from sun rays & rain including cost of jointing material i.e. solvent cement etc. comp. |
| 26 | {A}75 mm dia.HDPE 6 kg/cm2 Pipe |
| 27 | ITEM NO.2 - Providing & supplyingValves of following dia. Including all taxes central & local transportation to site loading unloading etc. comp. |
| 28 | [C] 20mm dia air Valve |
| 29 | ITEM NO.3- Providing & SupplyingISI mark G.I. pipes offollowing dia.including all taxes central & local, transportationetc. comp. |
| 30 | A} 65 mm dia. G.I. pipe med. Class |
| 31 | ITEM NO.4- Excavation for foundation in following strata including removeing the excavated material upto a distance of 50 m. & lift as below including stacking & spreading etc. comp. |
| 32 | (A) SOIL |
| 33 | (B) HARD MURUM |
| 34 | (C) Soft Rock |
| 35 | (D) Hard Rock |
| 36 | ITEM NO.5 - Filling in plinth & floors murum bedding in trenches with approved murum from excavated material from foundation in 15 to 20 cm. layers including watering & compaction etc. comp. |
| 37 | ITEM NO.6- Lowering , laying & jointing HDPE pipes & specials of following dia. Including cost of convenace from store to site of work including cost of all labour, material expect cement solvent rubber ring giving satisfactory testing etc. comp. |
| 38 | {A}75 mm dia.HDPE 6 kg/cm2 Pipe |
| 39 | ITEM NO.7- Lowering , laying & jointing in position following dia valves including cost of all labour jointing material including nut bolts and giving satisfactory testing etc comp. |
| 40 | [C] 20mm dia air Valve |
| 41 | ITEM NO.8- Lowering , laying & jointing G.I. pipes of following dia. Including conveyance from store to site of work,all labour, giving satisfactory hydraulic testing comp. |
| 42 | A} 65 mm dia. G.I. pipe med. Class |
| 43 | ITEM NO.9- Refilling the excavated trenches with available excavated stuff with soft material first over pipe line & then hard material in 15 cm. layer with all lead & lift consolidaton surcharging etc. comp. |
| 44 | ITEM NO.10- Hydraulic testing of PVC Pipe line to specified pressure including cost of all material and labour and water for testing for specified length including cutting placing end caps making arrangement for filling safe water using reciprocating type pumps which should be abel to provide specified test pressure gauges and other necessary equipment labour operartion charges etc. required for testing the rate under this item shall also include cost of retesting if necessary and reinstarting to orignal position. |
| 45 | {A}75 mm dia.HDPE 6 kg/cm2 Pipe |
| 46 | ITEM NO.11- Hydraulic testing of GI Pipe line to specified pressure including cost of all material and labour and water for testing for forlength upto 1 km using reciprocating type pumps which should be abel to provide specified test pressure gauges and other necessary equipment labour operartion charges etc. required for testing the rate under this item shall also include cost of retesting . |
| 47 | A} 65 mm dia. G.I. pipe med. Class |
| 48 | Sub Work No. 3 :- RCC GSR(GALDEV) |
| 49 | Designing (aesthetically), andconstructing RCC ground service reservoirs / RCC sumps in M-300 mix of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, alllabour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bypassarrangement consisting of C.I. M.S. D/F. pipes, specials and valves of given diameters, providing and fixing accessories such as M.S. ladder inside and outside, C.I. Manhole frame and cover, water top slab, B.B. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per IS code and providing three coats of cement paints to all exposed surface of structure including roof surface etc. complete asper design data, criteria, obligatory requirements and detailed specifications. Anti-termite treatment shall be given for underground portion of the structure.Notes |
| 50 | GSR Capacity - 17000 litrs |
| 51 | Item No. 2 - Providing and supplying at site of work CI D/F valves of following dia., including cost of all taxes (central and local) railway freight, unloading from railway wagon, loading into truck, transportation upto site of work, etc. complete |
| 52 | (A) 100 mm dia Sluice Valve PN 1.0 |
| 53 | Item No. 3 - Providing and supplying ISI mark GIpipesof following class and diameter including all taxes (Central and local),loadingunloading, stacking,transportation to site etc. complete |
| 54 | (A) 100 mm dia G. I. Pipe Med Class |
| 55 | B) Specials |
| 56 | (i) GI TEE (100 mm) |
| 57 | (ii) GI BEND (100 mm) |
| 58 | (iii) FLANGES |
| 59 | SUB WORK NO.4- Distribution system Galdev |
| 60 | ITEM NO.1- Providing & Supplying in standard length ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of coupler as per IS specification no. 4985/ 1988 offollowing dia.including all taxes central & local, transportation, loading unloading stacking the same in closed shed duly protected from sun rays & rain including cost of jointing material i.e. solvent cement etc. comp. |
| 61 | {A}63 mm dia.HDPE6kg/cm2 Pipe |
| 62 | ITEM NO.2- Providing & SupplyingISI mark G.I. pipes offollowing dia.including all taxes central & local, transportationetc. comp. |
| 63 | A}50 mm dia. G.I. pipe med. Class |
| 64 | ITEM NO.3 - Providing & supplyingValve of following dia. Including all taxes central & local transportation to site loading unloading etc. comp. |
| 65 | [A] 15 mm dia air Valve |
| 66 | ITEM NO.4 - Excavation for foundation in following strata including removeing the excavated material upto a distance of 50 m. & lift as below including stacking & spreading etc. comp. |
| 67 | (A) SOIL |
| 68 | (B) HARD MURUM |
| 69 | (C)Soft Rock |
| 70 | ITEM NO.5- Filling in plinth & floors murum bedding in trenches with approved murum from excavated material from foundation in 15 to 20 cm. layers including watering & compaction etc. comp. |
| 71 | ITEM NO.6- Lowering , laying & jointing HDPE pipes & specials of following dia. Including cost of convenace from store to site of work including cost of all labour, material expect cement solvent rubber ring giving satisfactory testing etc. comp. |
| 72 | {A}63 mm dia.HDPE6kg/cm2 Pipe |
| 73 | ITEM NO.7- Lowering , laying & jointing in position following dia valves including cost of all labour jointing material including nut bolts and giving satisfactory testing etc comp. |
| 74 | [A] 15 mm dia air Valve |
| 75 | ITEM NO.8- Lowering , laying & jointing G.I. pipes of following dia. Including conveyance from store to site of work,all labour, giving satisfactory hydraulic testing comp. |
| 76 | A}50 mm dia. G.I. pipe med. Class |
| 77 | ITEM NO.9- Refilling the excavated trenches with available excavated stuff with soft material first over pipe line & then hard material in 15 cm. layer with all lead & lift consolidaton surcharging etc. comp. |
| 78 | ITEM NO.10- Hydraulic testing of HDPE Pipe line to specified pressure including cost of all material and labour and water for testing for specified length including cutting placing end caps making arrangement for filling safe water using reciprocating type pumps which should be abel to provide specified test pressure gauges and other necessary equipment labour operartion charges etc. required for testing the rate under this item shall also include cost of retesting if necessary and reinstarting to orignal position. |
| 79 | {A}63 mm dia.HDPE6kg/cm2 Pipe |
| 80 | ITEM NO.11- Hydraulic testing of GI Pipe line to specified pressure including cost of all material and labour and water for testing for forlength upto 1 km using reciprocating type pumps which should be abel to provide specified test pressure gauges and other necessary equipment labour operartion charges etc. required for testing the rate under this item shall also include cost of retesting . |
| 81 | A}50 mm dia. G.I. pipe med. Class |
| 82 | SUB WORK NO.5- Distribution system Bhogavatimura |
| 83 | ITEM NO.1- Providing & Supplying in standard length ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of coupler as per IS specification no. 4985/ 1988 offollowing dia.including all taxes central & local, transportation, loading unloading stacking the same in closed shed duly protected from sun rays & rain including cost of jointing material i.e. solvent cement etc. comp. |
| 84 | {A}63 mm dia.HDPE6kg/cm2 Pipe |
| 85 | ITEM NO.2- Providing & SupplyingISI mark G.I. pipes offollowing dia.including all taxes central & local, transportationetc. comp. |
| 86 | A}50 mm dia. G.I. pipe med. Class |
| 87 | ITEM NO.3 - Providing & supplyingValve of following dia. Including all taxes central & local transportation to site loading unloading etc. comp. |
| 88 | [A] 15 mm dia air Valve |
| 89 | ITEM NO.4 - Excavation for foundation in following strata including removeing the excavated material upto a distance of 50 m. & lift as below including stacking & spreading etc. comp. |
| 90 | (A) SOIL |
| 91 | (B) HARD MURUM |
| 92 | (C)Soft Rock |
| 93 | ITEM NO.5- Filling in plinth & floors murum bedding in trenches with approved murum from excavated material from foundation in 15 to 20 cm. layers including watering & compaction etc. comp. |
| 94 | ITEM NO.6- Lowering , laying & jointing HDPE pipes & specials of following dia. Including cost of convenace from store to site of work including cost of all labour, material expect cement solvent rubber ring giving satisfactory testing etc. comp. |
| 95 | {A}63 mm dia.HDPE6kg/cm2 Pipe |
| 96 | ITEM NO.7- Lowering , laying & jointing in position following dia valves including cost of all labour jointing material including nut bolts and giving satisfactory testing etc comp. |
| 97 | [A] 15 mm dia air Valve |
| 98 | ITEM NO.8- Lowering , laying & jointing G.I. pipes of following dia. Including conveyance from store to site of work,all labour, giving satisfactory hydraulic testing comp. |
| 99 | A}50 mm dia. G.I. pipe med. Class |
| 100 | ITEM NO.9- Refilling the excavated trenches with available excavated stuff with soft material first over pipe line & then hard material in 15 cm. layer with all lead & lift consolidaton surcharging etc. comp. |
| 101 | ITEM NO.10- Hydraulic testing of HDPE Pipe line to specified pressure including cost of all material and labour and water for testing for specified length including cutting placing end caps making arrangement for filling safe water using reciprocating type pumps which should be abel to provide specified test pressure gauges and other necessary equipment labour operartion charges etc. required for testing the rate under this item shall also include cost of retesting if necessary and reinstarting to orignal position. |
| 102 | {A}63 mm dia.HDPE6kg/cm2 Pipe |
| 103 | ITEM NO.11- Hydraulic testing of GI Pipe line to specified pressure including cost of all material and labour and water for testing for forlength upto 1 km using reciprocating type pumps which should be abel to provide specified test pressure gauges and other necessary equipment labour operartion charges etc. required for testing the rate under this item shall also include cost of retesting . |
| 104 | A}50 mm dia. G.I. pipe med. Class |
AI Tender Summary
Tender Timeline
Jul 14, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 25, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender