Construction Of Approach Road To Plot No. 79-C, Epip Phase-I, Jharmajri, Teh. Baddi, Distt. Solan (Hp).
Tender Value
7.91 Lakhs
Estimated cost
Bid Submission
21 Jul 2022
0 days left
EMD
15800
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
baddi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Approach Road To Plot No. 79-C, Epip Phase-I, Jharmajri, Teh. Baddi, Distt. Solan (Hp).
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation treanches or drains (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto1.5 m,Including getting out the excavated soil and disposal of surplus excavated soil as directed, within all lead of 50m. hard rock (blasting prohibited). as per directed by Engineer-in-charge. All kinds of soil |
| 2 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material bytippers to work site, for all leads & lifts, spreading in uniform layers of specified thicknesswith motor grader on prepared surface and compacting with vibratory power roller to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.(a) With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 |
| 3 | Supplying and stacking at site. Laying, spreading and compacting stone aggregate of specified sizes to WBMspecifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .(a) 63 mm to 45 mm size stone aggregate |
| 4 | Supplying and stacking at site. Laying, spreading and compacting stone aggregate of specified sizes to WBMspecifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .(a) 53 mm to 22.4 mm size stone aggregate. |
| 5 | Providing and laying factory made chamfered edgeCement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over50mm thick compacted bed of sand, compacting andproper embedding/laying of inter locking paver blocksinto the sand bedding layer through vibratory compactionby using plate vibrator, filling the joints with sand andcutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as perdirection of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade approved by HPPWD (NTC/Ashok Panjla Tiles/NTCCI/Pooja Concrete Fabricators) with approvedcolor design and pattern. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering,shuttering &finishing - All work up to plinth level1:5:10 (1 cement : 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for walls (any thickness) including attachment pilasters, butteresses, plinth and string courses etc. |
| 8 | Providing and laying in positionspecified grade of reinforced cement concrete, excluding the cost of centering,shuttering,finishing and reinforcement- All work up to plinth level1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 9 | Steel reinforcement for RCC work including straightening, cutting, bending, placing in positon and binding all complete above plinth leve. Thermo-Mechanically Treated bars of grade-Fe-500-D or more. |
| 10 | Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous Chinaincluding carriage of material within all leads and lifts. |
AI Tender Summary
Tender Timeline
Jul 14, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 22, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender