Construction Of Approach Road S.T.B.T. And C.C. Road To Shani Maharaj Mandir At Shanidevgaon, Tq. Vaijapur Dist. Aurangabad.
Tender Value
22.07 Lakhs
Estimated cost
Bid Submission
20 Jul 2022
0 days left
EMD
22500
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
vaijapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Approach Road S.T.B.T. And C.C. Road To Shani Maharaj Mandir At Shanidevgaon, Tq. Vaijapur Dist. Aurangabad.
BOQ
| Sl. No. | Item Description |
| 1 | EXCAVATION FOR ROADWAY IN EARTH, SOIL of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. |
| 2 | Providing SOLING USING 80 MM SIZE TRAP METAL in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 3 | Construction of DRY LEAN CEMENT CONCRETE Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete. |
| 4 | Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal FOR WEARING COURSE 8CM thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) |
| 5 | Providing and CONSTRUCTING 75 MM. THICK MODIFIED PENETRATION MACADAM (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% CRUSHER BROKEN METAL + 70% HAND BROKEN (BY BREAKING RUBBLE OBTAINED BY BLASTING) heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. INCLUDING PICKING OF EXISTING WBM SURFACE. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 6 | Providing and applying TACK COAT on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer ON DRY / HUNGRY B.T. SURFACE 3 KG/10 SQM. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 7 | OPEN GRADED PREMIX SURFACING- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( OVER MPM SURFACE) (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 8 | Providing BITUMINOUS TYPE A LIQUID SEAL COAT on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG- 30 bulk bitumen rates are considered to arrive at rates) |
| 9 | Supplying HARD MURUM/ KANKAR at the road site, including conveying and stacking complete. |
| 10 | SPREADING hard murum/ soft murrum/ gravel or kankar for side width complete |
| 11 | Providing and fixing BOARD DISPLAYING INFORMATION, SUCH AS \"NAME OF WORK, TENDER COST, NAME OF CONTRACTOR, WORK COMPLETION AND LIABILITY PERIOD ETC\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 12 | Royalty Charges [A] For Sand (As per statement). |
| 13 | Royalty Charges [B] For Other Minerals (As per statement). |
| 14 | Carrying out test for Cement [A] Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness |
| 15 | Carrying out test for Concrete [A] Compressive Strength OF C.C. Cube(Set of 3 cubes). |
| 16 | Carrying out test for Agrregate [A] Water Absorption, Specific Gravity. Impact Value Crushing Value. |
| 17 | Carrying out test for Fine Aggregates [A] Fineness Modulus ( Sieve Analysis ), Silt & Clay Content. |
AI Tender Summary
Tender Timeline
Jul 13, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 21, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender