Laying Fitting Of Rising Main, Gravity Main Distribution Network Of G.I.Pipes, Of Wss Kalsote
Tender Value
2.16 Crore
Estimated cost
Bid Submission
03 Sep 2022
0 days left
EMD
4.33 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
udhampur → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Laying Fitting Of Rising Main, Gravity Main Distribution Network Of G.I.Pipes, Of Wss Kalsote
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Jul-2022 | date corrigendumiiiiii | Date | 18-Aug-2022 |
| 2 | 19-Aug-2022 | date extend of tender iiiiiIii | Date | 03-Sep-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by manual meansover areas (exceeding 30 cm in depth, 1.5m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil. |
| 2 | Earth work in excavation by manual means in trenches for foundation , drains , pipes cables etc (not exceeding 1.5 mtr in width) and for shafts wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed inall kinds of soils. |
| 3 | Laying and fitting of G.I pipe ( all classes)complete excluding the cost of pipes ,fittingsand earth work. G.I Pipe 100mm dia |
| 4 | Laying and fitting of G.I pipe ( all classes)complete excluding the cost of pipes ,fittingsand earth work. G.I Pipe 80mm dia |
| 5 | Laying and fitting of G.I pipe ( all classes)complete excluding the cost of pipes ,fittingsand earth work G.I Pipe 65 mm dia |
| 6 | Laying and fitting of G.I pipe ( all classes)complete excluding the cost of pipes ,fittingsand earth work G.I Pipe 50 mm dia |
| 7 | Laying and fitting of G.I pipe ( all classes)complete excluding the cost of pipes ,fittingsand earth work. G.I Pipe 40 mm dia |
| 8 | Laying and fitting of G.I pipe ( all classes)complete excluding the cost of pipes ,fittingsand earth work G.I Pipe 32 mm dia |
| 9 | Laying and fitting of G.I pipe ( all classes)complete excluding the cost of pipes ,fittingsand earth work. G.I Pipe 25 mm dia |
| 10 | Laying and fitting of G.I pipe ( all classes)complete excluding the cost of pipes ,fittingsand earth work. G.I Pipe 20 mm dia |
| 11 | Laying and fitting of G.I pipe ( all classes)complete excluding the cost of pipes ,fittingsand earth work. G.I Pipe 15 mm dia |
| 12 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating eachdeposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 13 | Dismanttling manually/mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meter lead as per direction of Engineer-in-charge: Water bound macadam road. |
| 14 | Dismanttling manually/mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meter lead as per direction of Engineer-in-charge: Bituminous road. |
| 15 | Providing & Fixing brass bib cock of approved quality 15 mm nominal bore |
| 16 | Providing & fixingbrass ferrule with C.I . Mouth cover including boring & tapping the main 15 mm nominal bore |
| 17 | Welding of joints by electric arc welding including, testing and commissioning of joints including carriage of set and all other accessories including making arrangement for electric supply/arrangement for Generator etccomplete |
| 18 | Making interconnection of G I distribution branch with G IMainby providing and fixing tee, union incl. cutting and threading of pipe etc complete25mm to 40mm dia. |
| 19 | Making interconnection of G I distribution branch with G IMainby providing and fixing tee, union incl. cutting and threading of pipe etc complete50mm to 80mm dia. |
| 20 | Sliuce valve: ISI Marked/Heavy duty Sluice valve (Variety:PD) for water works purpose, CI double flanged type with hand wheels and pressure desiganation conforming to IS 4846/2000 with upto date amendments. Components/part of Sluice valves shall be manufactured from basis material given in relevant IS:Code. The valves shall be tested for (Closed end test) against hydrostatic test requirement. 80MM dia (PN 1.6 ) |
| 21 | Providing and fixing C.I. double acting air valve of approved qualitywith bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).50 mm dia. |
| 22 | Providing and fixing GM Gate valve 100mm dia (ISI/Heavy duty) (minimum weight without hand wheel 10500-10800 GMS) |
| 23 | Providing and fixing of gun metal gate valvewith C.I. wheel of approved quality as per BIS specifications (screwed end) 80 mm nominal bore |
| 24 | Providing and fixing of gun metal gate valvewith C.I. wheel of approved quality as per BIS specifications (screwed end) 65 mm nominal bore |
| 25 | Providing and fixing of gun metal gate valvewith C.I. wheel of approved quality as per BIS specifications (screwed end) 50 mm nominal bore |
| 26 | Providing and fixing of gun metal gate valvewith C.I. wheel of approved quality as per BIS specifications (screwed end) 40 mm nominal bore |
| 27 | Providing and fixing of gun metal gate valvewith C.I. wheel of approved quality as per BIS specifications (screwed end) 32 mm nominal bore |
| 28 | Providing and fixing of gun metal gate valvewith C.I. wheel of approved quality as per BIS specifications (screwed end) 25 mm nominal bore |
| 29 | Providing and fixing of gun metal gate valvewith C.I. wheel of approved quality as per BIS specifications (screwed end) 20 mm nominal bore |
| 30 | Supply of stone in Horizontal on level |
| 31 | Dumping andfilling of stone in Horizontal on level |
| 32 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone upto 40mm thick size nominal size) |
| 33 | Providing &layingin position cement concrete of specified grade excluding the cost of centering and shuttering -all work upto plinth level in 1:3:6 (1 cement:3coarse sand : 6 graded stone upto 20mm thick size nominal size) |
| 34 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 35 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 36 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering finishing and reinforcement with1:1½:3 (1 cement: 1½ Coarse sand : 3 graded stone aggregate 20mm nominal size)using crushed stone agg.) |
| 37 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 38 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 39 | Reinforcement cement concrete work in Arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15°upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with 1:1½:3 (1cement : 1½ coarse sand: 3 graded stone aggregate 20mm nominal size) |
| 40 | Providing and laying in position machine batched and machine mixed design mix M-25grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workabilitywithout impairing strength and durability as per direction of Engineer-incharge..All works upto plinth levelNote: - Minimum cement content considered is @ 330 kg/ cum. Any quantity less than 330 kg/cum as per design mix shall be deducted @ Rs 976.70/Qtl (As per SSR 2020). However no extra shall be paid for higher quantity of cement used as per design mix. |
| 41 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. All works above plinth level upto floor V levelNote: - Minimum cement content considered is @ 330 kg/ cum. Any quantity less than 330 kg/cum as per design mix shall be deducted @ Rs 976.70/Qtl (As per SSR 2020). However no extra shall be paid for higher quantity of cement used as per design mix. |
| 42 | Extra for providing richer mixes at all floor levels. Providing M-30 grade concrete instead of M-25 grade BMC/RMC.Note: - Minimum cement content considered is @ 340 kg/ cum. Any quantity less than 340 kg/cum as per design mix shall be deducted @ Rs 976.70/Qtl (As per SSR 2020). However no extra shall be paid for higher quantity of cement used as per design mix. |
| 43 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo -Mechanically Treated bars of grade Fe-500 or more |
| 44 | Centering and shuttering including strutting, propping etc and removal of form work for foundation,footings, base for columns etc for mass concrete . |
| 45 | Extra for shuttering in circular work |
| 46 | Centering and shuttering including strutting, propping etc and removal of form work for Walls(any thickness) including pilasters, butresses,plinth and string courses etc. |
| 47 | Extra for shuttering in circular work |
| 48 | Centering and shuttering including strutting, propping etc and removal of form work for Lintels Beams, plinth beams, girders , bresssumers and cantilevers. |
| 49 | Extra for shuttering in circular work |
| 50 | Centering and shuttering including strutting, propping etc and removal of form work for Supended floors, roofs, landings , balconies and access platforms |
| 51 | Centering and shuttering including strutting, propping etc. and removal of form for:Arches, domes, vaults upto 6 m span |
| 52 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete40mm thick with 20mm nominal size stone aggregate |
| 53 | 12mm thick cement plaster of mix 1 : 4 (1 cement : 4 Coarse Sand) |
| 54 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, allnecessary fittings complete, including applying a priming coat of approved steel primer Using flats 30x6mm for diagonal braces and central cross piece. |
| 55 | Providing and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement |
| 56 | Finishing exterior & Interior with Water proofing cement paint of approved brand and manufacture to give an even shade new work(Two or more coats [email protected]/10Sqmt) |
| 57 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 58 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge Made of G.I. wire of dia 4 mm |
| 59 | Providing and incorporating ( During concretingGP sheet strings water seal 1.25 mm nominal thick at const. joints includingends so as to form a continues barrier strips area excluding laps to bemeasured |
| 60 | Providing and fixing S.C.I. S & S 100 mm dia bend |
| 61 | Providing and fixing100 mm Slotted Cowl (Terminal Guard)S C.I. S & S |
| 62 | Providing and fixing G.I. pipes complete with G.I. fittings excludingtrenching and refilling etc. (external work) 80mm dia (Medium)(for washout/delivery main/welded with MS plate thick 150x150mm size and for suction pipe) |
| 63 | Providing steel rope crossing including cost of steel rope, U-Clamp, iron clamp/hooks, labour charges for stretching the steel rope in position, hire charges of chain pully along with operator, laying and fitting of GI pipes including all carriages complete job |
| 64 | Commissioning of Filtration Gallery including cost of carriage of filter media, valves, pipe specials, v-screen pipes, GI pipes etc complete job |
| 65 | Carriage ofG I Pipesfrom Departmental Store at Udhampur by Mechanical Transport to site of work including cost for loading ,unloading& stacking for an av. distance ofAverage 50 km |
| 66 | Carriage ofG I Pipes by Manual mean from Road side (to be identified by Engineer in charge) to site of work including cost for loading , unloading & stacking for an av. distance ofAverage 2000 m |
| 67 | Carriage of Sandby Mechanical Transport from source (to be identified by engineer in charge) to road side including cost for loading and unloading.for an av. distance of 110 km |
| 68 | Carriage ofstone aggregate (Crushed) above 20 mmby Mechanical Transport from source (to be identified by engineer in charge) to road side including cost for loading and unloading.for an av. distance of 50 km |
| 69 | Carriage of sand andstone aggregate (Crushed) above 20 mmby Manual means from road side(to be identified by engineer in charge) to site of work including cost for loading and unloading.for an av. distance of3000 m |
| 70 | Carriage of Soling stone/ boulders by Mechanical Transportfromsource (to be identified by engineer in charge) to site of work including loading and unloading. for an average distance of15 km |
| 71 | Carriage of Soling stone/ boulders by manual means fromroad side (to be identified by engineer in charge) to site of work including loading and unloading. for an average distance of3000 m |
| 72 | Carriage ofcement & steelfrom nearest market (as approved by Engineer in Charge)to road sideby Mechanical Transport to site of work including cost for loading ,unloading& stacking for an av. distance ofAverage 50 km |
| 73 | Carriage ofcement by manual means from road side (to be identified by Engineer in Charge)to site of work including cost for loading ,unloading& stacking for an av. distance ofAverage 3000 m |
| 74 | Carriage ofsteel by manual means from road side (to be identified by Engineer in Charge) by Head Load to site of work including cost for loading ,unloading& stacking for an av. distance ofAverage 3000 m |
| 75 | Providing & installation of Sign Board of size 8ft x 6ft with angle Iron frame of size 50 x 50 x 6 mm PBI sheet of 1.25mm thickness including painting and writing as directed by Engineer- In- charge. |
AI Tender Summary
Tender Timeline
Aug 19, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 18, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 03, 2022
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 03, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 06, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender