}

Provision Of 02 Nos Tubewell In Cantt Kanpur.- 1 Drillingof 550 Mm Dia Bore Using Rig Machinefrom Ground Level To Required Depth. 2 Ditto But 450 Mm Below 550 Dia Bore. 3 S / F Of 200 Mm Dia Mserw Pipe Of 7.1 Mm 4 S / F Of 150 Mm Dia Mserw Pipe Of, kanpur-Uttar Pradesh

Directorate General Defence Estates has published Provision Of 02 Nos Tubewell In Cantt Kanpur.- 1 Drillingof 550 Mm Dia Bore Using Rig Machinefrom Ground Level To Required Depth. 2 Ditto But 450 Mm Below 550 Dia Bore. 3 S / F Of 200 Mm Dia Mserw Pipe Of 7.1 Mm 4 S / F Of 150 Mm Dia Mserw Pipe Of. Submission Date for this Tender is 03-08-2022. Machine Tools Tenders in kanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

33068753
Provision Of 02 Nos Tubewell In Cantt Kanpur.- 1 Drillingof 550 Mm Dia Bore Using Rig Machinefrom Ground Level To Required Depth. 2 Ditto But 450 Mm Below 550 Dia Bore. 3 S / F Of 200 Mm Dia Mserw Pipe Of 7.1 Mm 4 S / F Of 150 Mm Dia Mserw Pipe Of
Open Tender
Indian
Uttar Pradesh
kanpur
03-08-2022

Tender Details

Provision Of 02 Nos Tubewell In Cantt Kanpur.- 1 Drillingof 550 Mm Dia Bore Using Rig Machinefrom Ground Level To Required Depth. 2 Ditto But 450 Mm Below 550 Dia Bore. 3 S / F Of 200 Mm Dia Mserw Pipe Of 7.1 Mm 4 S / F Of 150 Mm Dia Mserw Pipe Of 7.1 Mm 5 S / F Of 150 Mm Dia Slotted Mserw Pipe Of 7.1 Mm 6 S / F M.S Socket 200 Mm Dia 7 S / F M.S Socket 150 Mm Dia 8 S / F Of Reducer 200X150 9 S / F Of Ms Ring Of 200 Mm Dia 10 S / F Of Bail Plug 150 Mm 11 S / F Of Tubewell Support With I Setion And Clamp For 200 Mm Dia 12 S / F Of Well Cap 150 Mm Dia 13 S / F Of Well Cap 200 Mm Dia 14 Supply And Laying Of Lal Kuan Quarry Pea Gravels 1.6 To 4.8Mm. Size Duly Screened And Washed 15 Electric Logging Of Bore Well 16 Development Of Tubewell With 250 Psi Air Compressor Complete In All Respect 17 Development Of Tube Well By Required Cusec Of O.Punit 18 Supply, Fixing , Testing And Commisioningof 10 H.P Clear Water Submersible Pump With Electric Motor Capable To Operate On 415 Volts 3 Phase 50 C / S A.C Supply Of 800 Lpm 50 Mtr Headwith Requiredswitch Gear Along With Starter And Control Pannel Cable Etc.With Supply And Instalation Of Pumping Plant With Earthing And Power Wiring Including All Necessary Fitting Including By Pass And Delivery Arrangement And Other Necessary Eqipment / Works Complete In All Respect 19 Supply, Fixing , Testing And Commisioningof 7.5 H.P Clear Water Submersible Pump With Electric Motor Capable To Operate On 415 Volts 3 Phase 50 C / S A.C Supply Of 600 Lpm 50 Mtr Headwith Requiredswitch Gear Along With Starter And Control Pannel Cable Etc.With Supply And Installation Of Pumping Plant With Earthing And Power Wiring Including All Necessary Fitting Including By Pass And Delivery Arrangement And Other Necessary Eqipment / Works Complete In All Respect 20 Supply And Fixing Of Misc Item For Protection Ring Cutout, Electrical Resistance Rubber Sheet Etc 21 S / F Of 80 Mm Dia 5.5 Mm Thick M.S Column Pipe With Both End Flanged And Groove For Passing Of Submersible Cable In Each Length In 3M Longincluding 1 Mtr Long Top Pipe With Cap And Sealing Ring 22 S / F Of 80 Mmdia Ci-D / F90 Degree Bend 23 S / F Of 80 Mmdia Ci-A / F Tee 24 S / F Of M.S Enlarger / Reducer Of Suitable Size 25 S / F Of Kirlosker / Ivc Or Equivalent Make 80 Mm Dia Sluice Valve.Non Rising System With Hand Wheel Both End Flanged With Isemetric Trap Axial Threads For Smooth Operation Of Steam Face Ring Pressed In Body And Wedge Tarred On Both Sides Provided With Deep Grooves Inside.Application Handling Of Clear Water Sp. Gr. 1.0 ( Conforming To Is 780 / I.S 2905 ) 26 S / F Of Kirlosker / Ivc Or Equivalent Make 80 Mm Dia Reflex Valve ( Confirming To Is 5312 Part-1 ) Suitable For Handling Clear Water Having Specific Gravity Both End Flanged Door Contact Of The Periphery Gunmetal Body, Hinge Pin Of Stainless Steel , Disc Face: High Quality Mature Rubber Or Better. 27 Providing And Laying 80 Mm Ductile Iron K-9 Pipe Including Excavation Oftrenches On Hard / Lose Soil, Cutting Of Pipe, Jointing Etc Complete In All Respect As Directed By Engg-In-Charge 28 Supply And Fixing Of C.I Fitting Such As Bend, Tee Etc As Required On Site Etc 29 Supply And Laying Of 25 Sqmm Aluuminium Cable In Hdpe / Dwc Pipe Of 63 Mm Dia 30 S / F Of100 Amp. Connection Box

Key Value

Document Fees
INR 1500 /-
EMD
INR 96000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail