For The Work Of Against Sanctioned Package No. 56 / 2022-23 & 57 / 2022-23 On Full Turnkey Basis ( Under Mp / Mla Nidhi ) Under Electricity Urban Distribution Division-Iv, Gorakhpur- 2 Supply Offollowing Mate, Gorakhpur-Uttar Pradesh

For The Work Of Against Sanctioned Package No. 56 / 2022-23 & 57 / 2022-23 On Full Turnkey Basis ( Under Mp / Mla Nidhi ) Under Electricity Urban Distribution Division-Iv, Gorakhpur- 2 Supply Offollowing Material / Fitting Complete In All Respect :- 3 33Kv 3X300 Sqmm Xlpe Cable 4 S.T Pole 11 Mtr. Long 5 33 Kv 3X300 Sqmm Xlpe Cable Jointing Kit 6 33 Kv Top Channel 125X65x3200 Mm With Clamp 7 33 Kv Dropper Angel 8 Earthing Of Pole By Ms Earthing Rod Of 20X2500 Mm And 6Swg Earthing Wire Etc. 9 G.I Pipe 6 Inch Dia For Cable Support 10 Holding Clamps For Top, Dropper Etc. 11 Nut And Bolts Of Different Sizes 12 Hdpe Pipe Dia 150 Mm Pn 6 Pe 80 13 The Excavation Of 2 No Foundation Pit Of Size 750Mmx450mm And Having Depth Of 1 / 6Th Of The Full Length Of The Pole. Fabrication & Erection Of Double Pole With Fixing Of Necessary Clamps & Accessories ( Top Channel, Dropper Angle Etc. ) As Per Required. All Required Materials Such As Holding Clamp / Stp Clamp, Nuts & Bolts Off Size Etc Will Be Provided By The Contractor.Grouting Of Pole In Cc 1:4:8 ( Cement, Sand & 40 Mm Brick Ballast ) , Grouting Will Be Done In The Block Ofsize 450X450 Mm X Depth Upto Ground Level And Backfilling Of Pits With Mud Completely And Leveling Etc ( Material Provided By Contractor ) .Making Plinth Around Pole Height 300 Mm Above Ground Level With Top 100 Mm Is Kept Tapered So That No Rainwater Gets Accumulated On The Top. All Work Will Be Done As Per Respo Norms & Relevent Is Specification. 14 Painting Of Pole By Double Coating Aluminum & Red Oxide Paint. Paint Will Beprovided By Contractor 15 Earthing Of St Pole By Ms Earthing Rod & 6 Swg Earthing Wire As Per Respo Norms. 16 Laying Of Hdpe Pipe 150 Mm Diameter For Laying Of 33 Kv 3X300 Sq Mm Xlpe Cable By Horizontal Drilling Method. The Hdpe Pipe Shall Be Of Pe 80 Grade With Pressure Rating Pn6 Conforming To Is 4984 / 1995 And Shall Have Wall Thickness Of 6.20 To 7.10 Mm ( Hdpe Pipe 150Mm Dia With Elbow And Socket For 33 Kv Cable Will Be Supplied By Contractor ) 17 Laying And Dressing Of Under Ground 33 Kv 3X300 Sq Mm Xlpe Cable Into Hdpe Pipe By Horizontal Drilling Method As Per Resspo Norms. The Depth Of Horizontal Drilling Shall Be Between 2 To 3 Meters Or As Per Site Required. 18 Errection Of 33 Kv Xlpe Cable 3X300 Mm² Jointing Kit With Complete Work 19 Dismantling Of Old Line And Safe Loading, Unloading And Carraige Of Dismantled Materials From Work Site To Departmental Store ( As Per Site Requirement ) 20 Fo|Qr Uxjh; Forj.K [ K.M&Prqfkz Xksj [ Kiqj Ds Vurxzr Tek ;Kstuk Esa Lohd`R Isdst La [ ;K 57@2022&23 ¼Jherh LqKek Kkgh Oklrs Jk / Kklokeh Lalfkku Hkou Es=Hiqje~ Xksj [ Kiqj Esa Fo|Qrhdj.K Dk Dk;Z½ Ds Dk;Ksz Dks Qqy Vuzdh Ds Vk / Kkj Ij Djk;S Tkus Gsrq Dk;Z Dk Fooj.K %& 21 Supply Offollowing Material / Fitting Complete In All Respect :- 22 Pcc Pole 8.5 Mtr 23 Lt Abc ( 3X120+1X95+1X16 ) Sq.Mm 24 Stay Complete With 5 Kg Wire 25 Acsr Weasel Conductor 26 Earthing Complete 27 Lt Calmp For Pcc Pole With Nut & Bolts 28 Lt Shackle Insulater 29 Distribution Box With Clamp ( Distribution Box Shall Be Made From 20 Swg Crca Sheet By Deep Drown Method With Powder Coating & Size Of Box Shall Be 418 Mm X 300Mm X 120 Mm ( Roof Of The Box Shall Be Tapered On Both Sides To Drain The Rain Water ) 30 Clamp For Distribution Box 31 Insulated Dead End Clamp With I Hook 32 Insulated Suspension Clamp With I Hook 33 Lt Insulation Piercing Connector For Line To Line Jumpering In Case Of Tapping 34 Nuts & Bolts 35 Xlpe Pvc Insulated 1X35 Sq.Mm Cable For Energizing D.B 36 The Excavation Of Foundation Pit Of Size 750Mmx450mm And Having Depth Of 1 / 6Th Of The Full Length Of The Pole. Fabrication & Erection Of Pcc Pole With Fixing Of Necessary Clamps & Accessories As Per Required. All Required Materials Such As Holding Clamp / Lt Clamp, Lt Shackle Insulator, Nuts & Bolts Off Size Etc Will Be Provided By The Contractor.Grouting Of Pole In Cc 1:4:8 ( Cement, Sand & 40 Mm Brick Ballast ) , Grouting Will Be Done In The Block Ofsize 450X450 Mm X Depth Upto Ground Level And Backfilling Of Pits With Mud Completely And Leveling Etc ( Material Provided By Contractor ) .All Work Will Be Done As Per Respo Norms & Relevent Is Specification. 37 Laying, Stringing, Sagging, Binding And Jumpering Of Acsr Weasel Conductor For Lt / Ht Line With Fixing Of Lt Clamps / Other Clamps, Shackle Insulator And Nuts&Bolts Off Size As Per Required. 38 Laying, Stringing, Sagging, Binding And Jumpering Of Abc ( 3X120+1X95+1X16 ) Sq.Mm. Cable Of Lt Line With Fixing Of Distribution Box With Clamp, Insulated Dead End Clamp With I Hook, Suspension Clamp With I Hook ( Insulated ) , Lt Insulated Piercing Connector, Xlpe 1X35 Sq.Mm. Al. Cable For Enerzing Db, Xlpe 1X16 Sq.Mm. Al. Cable For Giving Connection To Street Light And Nuts&Bolts Off Size By The Contractor. 39 Earthing Of St Pole By Ms Earthing Rod & 6 Swg Earthing Wire As Per Respo Norms. 40 Erection And Grouting Of Stay In Cc Ratio 1:4:8 Of Cement, Sand And Stone Ballast Including Cost Of Grouting Material With Nozelling And Binding Of Stay Wire ( Complete Work )

INR 3540 /-

INR 19000.0 /-

Refer document