Supply And Installation Of Equipments / Items For Fun / Entertainment Park At 10 ( Ten ) Different School Under Sepahijala District
Tender Value
12.50 Lakhs
Estimated cost
Bid Submission
01 Aug 2022
0 days left
EMD
25000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sepahijala → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply And Installation Of Equipments / Items For Fun / Entertainment Park At 10 ( Ten ) Different School Under Sepahijala District
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.-All kinds of soil By manual means |
| 2 | Filling available excavated earth (excluding rock) intrenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil |
| 3 | Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitablemethod complete. |
| 4 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering - -All work upto plinth level:1:4:8 ( 1 Cement: 4 fine sand : 8 graded well brunt brick aggregate 40 mm nominal size) |
| 5 | Providing and laying in position specified grade ofreinforced cement concrete excluding the cost ofcentring, shuttering, finishing and reinforcement--All work upto plinth level: 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well brunt brickaggregate20 mm nominal size) |
| 6 | Steel work in built up tubular (round, square orrectangular hollow tubes etc.) trusses etc., includingcutting, hoisting, fixing in position and applying apriming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. G.I.pipes.100mm, 80mm, 65mm,40mm,25mm |
| 7 | Providing and fixing M.S. round holding down bolts with nuts and wahser plates complete as per standard design. |
| 8 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required: Using M.S. angels 40x40x6 mm for diagonal braces. |
| 9 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:-In grating, frames, guard bar, railing, brackets, gates and similar works, all complete. . |
| 10 | Providing wood work in frames of doors, windows,clerestory windows and other frames, wroughtframed and fixed in position :Local Teak Wood |
| 11 | C.P.brass chain with 40 mm dia rubber plug |
| 12 | Supply & installation of pre-painted Galvalume sheets for roofing/cladding (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) in550mpa steel grade, made out of Cold Rolled Steelcoated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTMA792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.45mm thickness |
| 13 | Finishing with epoxy paint ( two or more coats ) ofapproved brand and manufacture at all locationsprepared and applied as per manufacturer\"sspecification on new work including appropriatepriming coat, preparation of surface etc. complete.[Payment shall be made after submission of TestCertificate issued by the Manufacturer] On steel work |
| 14 | Finishing with Deluxe Multi surface paint system forinteriors and exteriors using Primer as permanufacturers specifications [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture. |
AI Tender Summary
Tender Timeline
Jul 12, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 02, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender