|
| 1 | BUS |
| 2 | Item No. 1: Supply of Electric bus Shell with the specifications as per RFP Document |
| 3 | CONTENT |
| 4 | Item No. 2: Research about cultural heritage of Himachal, visiting tourist places for recce, 360 degree shoot of various tourist places along with Drone shoot. |
| 5 | Item No. 3: Manpower deployment for Planning, Concept Development, clarifying requirements, Concept generation, Concept Selection, System level designing, Detail Designing, Testing & refining, Production Ramp-up. |
| 6 | Item No. 4: Manpower Recruitment and Deployment for design and development of Screen playing of markup, Aspect ratio determination, sketching subject with background, planning arrow and camera movement, shot planning, finalizing and submission for approval. |
| 7 | Item No. 5: Manpower Recruitment and Deployment for development of Logline crafting, Treatment writing, storyline development, Plot and Outline, First draft for approval, Rewriting based on feedback. |
| 8 | Item No. 6: Renting of a recording studio and manpower deployment for scripting, dubbing, editing, and production. Selection of National Award winner voiceover Artist for Recording of Voiceover. |
| 9 | Item No. 7: Manpower deployment for development of music story line, Recording a Demo, Rehearsals, Basic Tracks, Overdubbing, S Editing Music, Music Mixing Part 1, Music Mixing Part 2, Music Mixing Part 3, Mastering, and final production. |
| 10 | Item No. 8: Manpower deployment for development of Subdivision/Box modeling, Spline/NURBS modeling, Image & surface based Modelling, Procedural modelling, digital modelling, sub-division modelling. The Use of all the above process will be to create 3D Assets. Use of Depth sensors will be to scan monuments for recreation of 3D Asset. Recreation of 3D assets from images taken on site. Proper Texturing for creating real life like 3D models. Close still shots of texture of per unit monuments and object being modelled. |
| 11 | Item No. 9: Deployment of Manpower for development of Rigging, Animation, Lighting, Camera Setting, Rendering, Compositing and Special VFX, Music and Foley, Editing and Final Output. |
| 12 | Item No. 10: Deployment of Manpower for designing and development of new Graphics for various scenes, editing of videos and images used collecting from recce, re-creation of new images and videos. |
| 13 | HARDWARE |
| 14 | Item No. 11: Supply Installation, Testing & Commissioning of extra battery bank of the same make as supplied by bus OEM to run the show equipment as mentioned |
| 15 | Item No. 12:Physical modification of the bus will be done as per:Maximum dimensions consideration for fleet movement inside bus (length and width restrictions may apply), fixing of screens involving consideration of Maximum weight (laden and unladen) Stability, Accessibility. Physical changes, window removal, welding & fixing of other structures installation of Display Unit on window on a slideway, IP67 housing & wiring, Audio & amplifier Installation and provision of Push Back Seat and making sure the bus is complete in all aspect and in running condition for height above sea level of more than approx 10000 feet with the required facility and delivered at site Manali as desired by HPSEDC/ HPTDC. |
| 16 | Item No. 13:Measuring and 3D scanning of bus using industry grade mm accurate 3D scanner for approval. |
| 17 | Item No. 14: 3D creation of bus with the help of scanned data and making proper modifications and doing dimensioning. A proper plan for modification has to be submitted for approval. |
| 18 | Item No. 15: Making of an electrical layout diagram of the bus for planning of installation of a new equipment. |
| 19 | Item No. 16: Laying out and Supply of electrical wires inside the bus using IP66 & IP67 wire housing with Heat Resistant & Flame Retardant ( HRFR ) Cable |
| 20 | Item No. 17: Supply, testing and commissioning of transparent screens to cover all the sides of the bus 22sqm (i.e., front, sides, corner and top of bus ) having :Minimum area of 22 sqm or more with high PPI (Pixel Per inch) having minimum 3840 * 2160 (4K) Resolution with 60 - 65 % transparency with minimum bezel and refresh Rate of 50 hertz 1 HDMI port and supported aspect ratio of 16:9. Power requirement of 240 V AC, 60 - 90 Watt for creating a smooth transition from real world to virtual 3D world. |
| 21 | Item No. 18: Supply, installation, testing and commissioning of Smart Switchable Glass Film screen |
| 22 | Item No. 19: Supply, installation, testing and commissioning of HDMI Cable from reputed suppliers with 24K gold plated connector: It must have streaming support of up to 4k videos with a wrap speed of 10 GB/s or more along with with a inbuilt repeater. |
| 23 | Item No. 20: Supply, installation, testing and commissioning of DP to HDMI Converter. |
| 24 | Item No. 21: Supply,testing and commissioning of 4U Rack mountable Display Server of i9/Xeon Latest Generation with Lifetime OS license, 64 GB RAM of DDR4 3200 Mhz, GPU to drive 4 X 4K output with Ray Tracing Support, should be supplied along with sync card if multiple GPU is used , 1 TB SSD having following interface SATA 6Gb/s should be compatible with SATA 3Gb/s , SATA 1.5Gb/s interfaces having Sequential Read/Write speeds up to 550/520 MB/s respectively, Power: 260 Watt, 240 V AC. |
| 25 | Item No. 22: Supply, testing and commissioning of Rack mountable Application Server of i9/Xeon Latest Generation with Lifetime OS license, 64 GB RAM of DDR4 3200 Mhz, GPU to drive 2 Output with Ray Tracing Support , 1 TB SSD having following interface SATA 6Gb/s should be compatible with SATA 3Gb/s SATA 1.5Gb/s interfaces having Sequential Read/Write speeds up to 550/520 MB/s respectively, Power: 260 Watt, 240 V AC. |
| 26 | Item No. 23: Supply, testing and commissioning of Shock Proof Server Rack with Shock Proof of 22U 600X600mm having PDU 6 Socket, 4 Cooling Fan, Static Loading 600 Kgs, 19” International standard, Material SPCC Quality Cold Rolled Sheet, Powder coating Frame RAL 7035 Doors RAL 7016 |
| 27 | Item No. 24: Supply testing and commissioning of industrial grade location sensor for mapping the 3D VR content with the movement calculation of the bus in real time with IP66 & IP67 Housing having max acceleration detection of 300 [m/s2] minimum velocity detection of 5000 meter /minute with maximum power requirement of 24 DC. |
| 28 | Item No. 25: Supply, testing and commissioning of IMU sensor having 6 Degree of Freedom (DOF) , Gyroscope Angular rate range of -245 to 245 deg/s, Accelerometer acceleration rate range of -60 to +60 m/s2, pitch & roll range of -60 to +60 degree for mapping the 3D VR content with gravitational and inertia based displacements of the bus in real time. |
| 29 | Item No. 26: Supply, testing and commissioning of industrial grade OBD (On-board diagnostics) for data transfer. The OBD(On-board diagnostics) specifications must include wired ability to read data streams and freeze Frame, oil light reset, SAS (Steering Systems and Suspension Systems), SRS (Shock Response Spectrum), DPF(Diesel particulate filters), EPB(Electric Park Brake), TPMS (Tire-pressure monitoring system), battery check function of Industrial Grade make only. |
| 30 | Item No. 27: Supply, testing and commissioning of Compact Two Way 8\"\" Loudspeaker System having Frequency Range: 58 Hz - 20 kHz (-10 dB), Frequency Response: 68 Hz – 19 kHz (±3 dB), Coverage Pattern- 90° x 50°, System Sensitivity (dB-SPL, 1W @ 1m)-92 dB, Maximum SPL: 113 dB, Nominal, Impedance: 8 Ohms, Power Handling (Program):500W , Wall Mount Bracket for above speakers. |
| 31 | Item No. 28: Supply,testing and commissioning of Dual 10\"\" Compact Subwoofer with Dual 10\"\" Subwoofer, Frequency Range 40 Hz - 220 Hz, Nominal Impedance 8O, Power Rating: 400W cont., Sensitivity (1W, 1m) 95 dB, Max SPL 122 dB, 45 Hz, 24 dB/oct high-pass filter, Safety Agency ROHS-compliant. |
| 32 | Item No. 29: Supply, testing and commissioning of 6.5\"\" Premium In-Wall Speakers with: Frequency Range: 38 Hz - 20 kHz (-10 dB), Power Rating: 200 W Peak Sensitivity (1W, 1m): 88 dB SPL, Impedance: 8 ohms, 3rd order (18 dB/oct) Low Pass and 3rd order (18 dB/oct) High Pass, Optimum Air Cavity Behind Speaker 20 to 40 liters with Rough-In Frame for above speakers. |
| 33 | Item No. 30: Supply, testing and commissioning of Four-channel, 600W @ 4O Analog Power Amplifier, 70V/100V with 600 W x 4 channels at 4 and 8 ohms/100V/70V or better, Voltage Gain :34 dB, Frequency Response 20 Hz - 20 kHz (at 1 W ), Signal-to-Noise Ratio Analog Input : 104 dB, Damping Factor :> 1000, 3 nos of RJ45 port 1 for data and 2 for Digital audio transmission in redundancy concept, Integrated 8 band EQ , Limiter , Crossover and Delay. |
| 34 | Item No. 31: Supply, testing and commissioning of Two-channel, 300W @ 4O Analog Power Amplifier, 70V/100V, 300 W x 2 channels at 4 and 8 ohms/100V/70V or better, Voltage Gain :34 dB, Frequency Response 20 Hz - 20 kHz (at 1 W ), Signal-to-Noise Ratio Analog Input : 104 dB, Damping Factor :> 1000, 3 nos of RJ45 port 1 for data and 2 for Digital audio transmission in redundancy concept, Integrated 8 band EQ , Limiter , Crossover and Delay. |
| 35 | Item No. 32: Supply, testing and commissioning of 4 x 4 Networked Digital Signal Processor DSP with 4 inputs and 4 outputs, 12 Control Inputs and 6 Logic Outputs for GPIO Integration, 48V phantom power on all analog inputs, THD: <0.01% 20Hz to 20KHz, +10dBu output, Crosstalk: <-75dB, Open architecture software configurable, Separate logic processing power, 2 digital audio bus RJ 45 Port 1 Ethernet port for Monitoring and configuration. |
| 36 | Item No. 33: Supply,, testing and commissioning of Four Button Zone Selector and Volume Control having 1 Programmable Push/Rotary Encoder, 1 Programmable Encoder Ring (Multicolored), 4 Programmable Buttons (Multicolored), 1 Programmable 64x128 Pixel LCD (Multicolored), Sleep Function, POE port, programmable LCD Screen |
| 37 | Item No. 34: Supply, installation, testing and commissioning of wireless keyboard and mouse |
| 38 | Item No. 35: Supply, installation, testing and commissioning of Router with Dual Channel 2.4 Ghz & 5Ghz having data speed of 2.53 Gbps, with Wireless 802.11a/b/g/n/ac |
| 39 | Item No. 36: Supply, installation, testing and commissioning Ethernet switch with 24 Port ,100 Mbps, 240 Volts, 6 Watt Power |
| 40 | Item No. 37: Supply, installation, testing and commissioning of CAT 6 Cable for connections. |
| 41 | Item No. 38: CCTV CamerasSupply, testing and commissioning- 2Mp Bullet Camera Indoor/Outdoor, 1/2.8\" progressive scan CMOS BLC/3D DNR/HLC- 1920 × 1080@30fps- Up to 40 m IR range- 2.8 mm/4 mm/6mm fixed lens IP67- DVR along with 5 TV Hard diskFor inside bus |
| 42 | Item No. 39: Supply, installation, testing and commissioning of EVSE(Electric Vehicle Supply Equipment ) for charging of 2 Wheeler, 3 Wheeler & 4 Wheeler having charger of following connector type:Combined Charging System ( CCS ) ( min 50 kW ) with 1 CG ( Connector Gun) CHArge de MOve ( CHAdeMO) ( min 50 kW ) with 1 CG ( Connector Gun ) Bharat DC-001 (15 kW) with 1 CG (Connector Gun)Bharat AC-001(10 kW) with 3 CG (Connector gun) of 3.3 kW per unit.The charger should be as per DST/BIS standards. |
| 43 | SOFTWARE |
| 44 | Item No. 40: Appropriate software to be developed to run the required content and integrate with the supplied sensors. The software source code must be developed using agile / waterfall methodology. Proper supply of test scripts must follow. Software should have following capabilities:Sensor interface for GPS, IMU, Velocimeter, Audio syncing with speed of bus, Content syncing with speed of bus, Geo data Mapping and playing 3D content in multiple screens, rendering capability, Mechanism to trigger software across network with latency of 5-20 ms, Creation of 3D environment with a 3D bus, Data mapping of sensor to 3D bus, 3D rendering based on sensor input, IMU sensor Data mapping to the movement of 3D bus, Yaw, Pitch, Roll mapping to 3D bus, Integration of virtual camera inside 3D world to generate exact map of real world. |
| 45 | OPERATION AND MAINTENANCE (OPEX) |
| 46 | Item No. 41: Operation and maintenance cost for 2nd Year |
| 47 | Item No. 42: Operation and maintenance cost for 3nd Year |
| 48 | Item No. 43: Operation and maintenance cost for 4th Year |
| 49 | Item No. 44: Operation and maintenance cost for 5th Year |
