|
| 1 | Providing the mechanical devices and new gear box with handle of operational moment of existing rolling shutter of height 3mtr i/c overhauling greasing, oiling & vertical travel of M.S rolling shutter etc complete as reqd. |
| 2 | Fabrication, supplying, & fixing of trench coversof 6mm thick M.S checkered sheet, 25mm x 25mm x 3mm M.S angle iron along the length along the width at a gap of 1mtr and cross angle diagonally in each mtr Z shaped) i/c cutting edges, grinding and painting with enamel black colouredpaint providing red oxide primer &etc complete as reqd at site. |
| 3 | Supplying fixing of handle of size 5”x2” made of ½” dia M.S road for opening and closingtheexisting sheet cover drilling holes, welding and painting etc. complete as reqd at site. |
| 4 | Painting of exising Panel, outdoor feeder pillars ,MSchequered plate with black colouredenemelled paints after removing the rust & grease/Oil with help of emery paper etc complete as reqd at site. |
| 5 | Supplying/ febrication of trench Zaal frame, made out of MS angle of 40mmX40mmX5mm (NS), 40 mm x 5mm by electric welding machine and cutting of angle and flats for supporting of frames, the zaal frame to be painted two or more coats etc. complete as required. |
| 6 | Supplying & fabrication of wire mesh protection frame work fabricating with 40 x 40 x 5 mm thick angle iron and tee iron of 40 x 40 x 5mm thick by making blocks of not less than 90 x 90cm in frame i/c providing and fixing 3mm thick wiremesh of section 75mm x 25mm of i/c openable door from front side of the same formation with locking arrangement having weight not less than 7.75kg/sq.mtrs and shall be fixed having leg of angle of size 50 x 50 x 6mm long length 50cm and is to be grounted in cement concrete foundation and all frame work is to be painted with two or more coats of synthetic enamel paint complete etc. as reqd. |
| 7 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 8 | Supplying & fixing of MS sheet of 2mm thickness,feeder pillar doors, with 2nos gowdown lock, 4nos hinges and 2Nos handles along with door painted with primer,enamle synthetic grey paint(Two coats) etc as reqd. |
| 9 | Providing and fixing of Y shape bracket at the top of wiremesh wall, the Y shaped brackets made out of MS Angle 40x40x5 mm thickness and holing by legth machine, for the banding of wires, the bracket height 1m at the top of buttom bracket painted two or more coats primer and black paints etc complete as reqd. |
| 10 | Providing and Fixing of range of high quality Stainless Steel single razor Concertina wire fencing for the security purpose around on the wall of pumps, the concertina wire to be galvanise silver coating, etc complete as reqd. |
| 11 | Credit for dismantled material (Buy-back)a) Old Rusted MS Angle, MS Pipe, Wiremesh, Poles, MS Sheets etc. |
