Provision Of Security Chain Link Fencing From Cp-7 To Gate No-3 Of 112 Inf Bn ( Ta ) And Certain Other Sanctioned Work Under Ge ( East ) Jalandhar Cantt
Tender Value
45 Lakhs
Estimated cost
Bid Submission
01 Aug 2022
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jalandhar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Security Chain Link Fencing From Cp-7 To Gate No-3 Of 112 Inf Bn ( Ta ) And Certain Other Sanctioned Work Under Ge ( East ) Jalandhar Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in soft /loose soil, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundations etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan andgetting out complete all as specified and directed. |
| 2 | Material and labour for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete etc complete all as specified and directed. |
| 3 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, for rough finished concrete surfaces completeall as specifiedand directed. |
| 4 | Use and waste of formwork to sides of pillars, posts, struts, piers,columns and stanchions, square, rectangular in rough finished surfaces of concretecomplete all as specified |
| 5 | Material and labour for MS TMT bars 10 mm and over dia and cut to length, bent to shape required including cranking bending spirally for hooping for clos hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed |
| 6 | Material and labour for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 7 | Material and labour reinforced cement concrete nominal mix in (1:1.5:3) type A-1 (using 20mm crushed stone aggregate) as in foundation, including rafts, footings, foundation beams, plinth beams, mass concrete and bases for columns etc complete all as specified and directed. |
| 8 | Material and labour reinforced cement concrete nominal mix in (1:1.5:3) type A-1 (using 20mm crushed stone aggregate) as in columns, pillars, piers, posts and struts etc complete all as specified and directed. |
| 9 | Material and labour for pre-polished granite slab 20mm thick granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including screed bed or bedding layer 15mm thick in CM (1:6) all as specified and directed |
| 10 | Material and labour for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steelconforming to Fe-290 Gde-E-165 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed. |
| 11 | Returning, filling in including leveling, watering and well ramming in layers n. exc. 25 cm thick each layer complete all as specified and directed. |
| 12 | Removing excavated material (soils) to a distance n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed. |
| 13 | Excavating in post holes (or similar holes) each n.exc 0.5 cum in soft/ loose soil, getting out, returning, filling in, watering and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed. |
| 14 | Material and labour for Mild steel work wind tie etc for roof including securing bolt, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc including all necessary drilling, bolting or riveting and including FI 40 x 6mm etc similar work conforming to Fe-290 Gde E-165 including complete all as specified. |
| 15 | Material and labour for mild steel angle iron fencing posts and struts in fencing including necessary cutting, drilling, welding etc and bending to swan neck shape as required and drilling holes notching for wire etc. conforming to Fe-410-0 or 310-0 complete all as specified and directed |
| 16 | Supply only chain link fencing MS galvanized any size or type complete all as specified and directed |
| 17 | Fixing only chain link fencing MS galvanized any size or type complete all as specified and directed. |
| 18 | Supply and fixing MS chain link fencing not less than 4mm thick galvanised steel wire and 75mm x 75mm size mesh fixed to steel fencing post by nut & bolts etc including provision of binding wire complete all as specified & directed by Engr-in-Charge. |
| 19 | Mild steel in flat, round or square bars, in available lengths conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified. |
| 20 | Supply and fixing mild steel screw bolts diameter of neck 11 to 15mm (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc. 5cm but n.exc 10cm long complete all as specified and directed. |
| 21 | Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 22 | Material and labour preparation of new or previously untreated steel surfaces of any description, n. exc. 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 23 | Material and labour galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. fixed in repair complete all as specified and directed Note : Each line wire to be measured separately. |
| 24 | Material and labour concertina coil of 600mm dia on vertical double horn fencing fixed complete all as specified and directed |
| 25 | Material and labour for brick work with fly ash bricks, in straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed |
| 26 | Material and labour for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete including necessary form work complete all as specified and directed |
| 27 | Material and labour for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in covered to bottom of fencing including necessary formwork complete all as specified and directed |
| 28 | Material and labour 15mm thick cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 29 | Material and labour preparation of newly plastered or un-plastered surface of walls including cornices, plasters etc. and applying two coats of cement base paint complete all as specified and directed. |
| 30 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed |
| 31 | Material and labour hard core of broken stone or boulder of gauge n. exc. 63mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed. |
| 32 | Material and labour 100mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub floors, sub base, hard standing, concrete surfaces finished even & rough to receive topping floor finish/layer all as specified & directed. |
| 33 | Material and labour for 150mm thick PCC (1:2:4) type B-2 using 20mm graded stone aggregate as in hardstanding, laid in alternate bay and making 8mm wide and 25mm deep construction (Dummy) joint and filled with bituminous, including brooming while concrete is green complete all as specified and directed. |
| 34 | Material and labour for 300mm bore RCC pipe (ISI Marked), class NP3, laid and jointed in cement mortar (1:1) with collars, laid in trenches at any depth and tested complete all as specified and directed. |
| 35 | Material and labour PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in concrete bed to 300mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 36 | Material and labour PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling, post hole, mass concrete, surface channel and drains and other similar work etc complete all as specified and directed. |
| 37 | Material and labour for mild steel work in flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed |
| 38 | Supply and fixing rolled section as in main and cross beams, hip and jack rafter, purlins, connected to common rafters, fixed with cleats and plates etc conforming to Fe-410-W (Gde-E-250), Quality \"A\" including one shop coat of zinc chromate primer paint including preparation of surface before fabrication all as specified and directed. |
| 39 | Material and labour for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but n. exc. one brick complete all as specified and directed. |
| 40 | Supply and fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws as specified and directed |
| 41 | Material and labour for painting over a coat of primer over new surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and directed |
| 42 | Material and labour cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed. |
| 43 | Material and labour 25cm x 25cm x 25mm thick chequeredcement concrete coloured tiles with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:3) complete all as specified and directed. |
| 44 | Supply and fixing hollow PVC wall lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed |
| 45 | Supply and fixing GI framed work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with including ceiling section (n.exc 1.2m length) of 0.55mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed. |
| 46 | Material and labour for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) any sunk or raised moulding surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed. |
| 47 | Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 48 | Supply and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 49 | Supply and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge |
| 50 | Supply and fixing aluminium mortice lock, vertical type size 100mm 4 lever brass body complete all as specified and directed. |
| 51 | Supply and fixing double action spring hinges, mild steel with steel wire spring, stove enamelled, black, 150mm complete all as specified and directed. |
| 52 | Supply and fixing 100mm butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed. |
| 53 | Supply and fixing aluminium handle cast type anodised 150mm long complete all as specified and directed. |
| 54 | Supply and fixing aluminium handle cast type anodised 100mm long complete all as specified and directed. |
| 55 | Supply and fixing 5.5mm thick float glass sheet, selected quality and fixed with aluminium frame etc exc 0.5 sqm in each pane complete all as specified and directed |
| 56 | Supply and fixing 5.5mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed. |
| 57 | Material and labour stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed. |
| 58 | Material and labour Granite (of any type) work 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, hand wash places and like including necessary cutting and grooving to walls and making good including 10mm thick in cement mortar (1:4) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite and including screed bed/ plaster layer 15mm thick in CM (1:6) complete all as specified and directed. |
| 59 | Supply and fixing powder coated anodised aluminium door shutters, weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed |
| 60 | Supply and fixing pre-laminated interior grade both side laminated of 9mm thick and fixing at site on aluminium frame complete all as specified and directed |
| 61 | Supply and fixing GI powder coated snap grid of size 605 x 605mm framework for false ceiling including necessary GI wire hangers 2mm dia for securing frame work to ceiling, and also including necessary notching and prepared holes complete all as specified and directed |
| 62 | Supply and fixing 12mm thick gypsum board for ceiling complete all as specified and directed |
| 63 | Excavation over areas n.exc. 1.5m in depth for foundation and getting out in soft/ loose soil complete all as specified and directed |
| 64 | Material and labour brick work with old size sub class \"B\" bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:4) complete all as specified and directed. |
| 65 | Supply and fixing mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified and directed. |
| 66 | Material and labour 75mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in plinth protection and path including finishing the concrete surface even & smooth without using extra cement complete all as specified & directed. |
| 67 | Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in foundation, including rafts, footings, foundation beams, plinth beams, mass concrete and bases for columns etc complete all as specified and directed. |
| 68 | Supply, install, commissioning and testing mortuary cabinet 04 body with high efficiency insulation panel minimum 80mm thick, with the following specifications :-(a) Capacity : 04 Body in two levels(b) Exterior finish : PPGI sheet(c) Interior finish : GI/ SS Finish(d) Tray type : One piece stainless steel tray with carriage assembly(e) Power supply : Single phase, 230V, 50 Hz with inbuilt power panel(f) Refrigeration system : Unitary type, forced air circulation(g) Lamp type : Vapour proof lamp(h) Temp controller : Electronic temperature indicator cum controller microprocessor based(j) Temperature range : +2 to +60C(k) Alarm : Audio visual on high and low temp(l) Door : Individual lock and key for each door with magnetic gasket(m) Platform : As per manufacturer recommendation including any type of civil work involved.Make : Bluestar/ Trufrost/ Tanco |
| 69 | Dismantling of existing mortuary cabinet and deposit to MES Store Yard, GE (East) JRC all as directed |
| 70 | Material and labour for point wiring with 1.5 sqmm (nominal area), 1100 volt grade FRLS PVC insulated unsheathed multi stranded copper conductor cable drawn in and including concealed rigid PVC conduit fire proof ISI marked with accessories including cutting chases for laying of conduit/ fixing of boxes in walls/ floors etc including making good to disturbed surfaces as per adjoining specification and terminated in concealed terminal boxes including MS concealed terminal boxes with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with washers and earth continuity PVC insulated FRLS type cable with stranded copper conductor of size 1.5 sqmm (nominal area) green colour as earth wire connected with earth dolly for one light point controlled by one switch complete all as specified and as directed |
| 71 | All as per srl item No. 70.00 above but for one socket outlet 5 Amps on independent board. |
| 72 | All as per srl item No. 70.00 above but with 2.5 Sqmm copper (nominal area) FRLS cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm with stranded copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed. |
| 73 | Supply and fixing in replacement switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified and directed. |
| 74 | Supply and fixing in replacement switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified and directed. |
| 75 | Supply and fixing in replacement socket out let 5 Amp, 5 pin flush type complete all as specified and directed. |
| 76 | Supply and fixing in replacement socket outlet multipurpose 2 in 1, 5/6 pin, 5 & 15 Amps, flush type complete all as specified |
| 77 | Supply and fixing in replacement Deco Ultra Slim linear LED lighting fixture with co-extruded polycarbonate body environmental friendly energy efficient ready to use pack 20 W LED T5 LED batten complete all as specified and directed |
| 78 | Supply and fixing 2 x 2 LED, 34 watt luminaire which ultra modern designed architectural which provides soft-light and glare free symmetrical illumination suitable for Armstrong/ grid ceiling including provision of PVC insulated sheathed round flexible wire with multi strand copper conductor of size 1.5 Sqmm 3 Core 1100 Volts grade complete all as specified and directed |
| 79 | Supply and fixing in repair MCB SP 6 to 32 Amps, C curve, 10 KA complete all as specified and directed |
| 80 | Supply and fixing in repair MCB SPN 32 Amps, B-curve, 10 KA complete all as specified and directed. Make for Srl No. 79.00 to 80.00 : Osafe series of HPL/ DX3 range of Legrand/ Betagard 5SL series of Siemens/ Acti 9 range of Schneider |
| 81 | Supply and fixing in replacement sheet metal enclosure DBs when MCBs to be used, SPN 4 ways 240 V, with copper bus bar, double door, epoxy coated inside and outside with earth bar and neutral bar/ connectors suitable copper thimbles, lugs etc complete all as specified. |
| 82 | Supply and fixing in repair ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Jul 11, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 08, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender