Rejuvenation Of Mettupalayam Vannan Kulam Ward No 9 In Pennathur Town Panchayat.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Jul 2022
0 days left
EMD
54000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pennathur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Rejuvenation Of Mettupalayam Vannan Kulam Ward No 9 In Pennathur Town Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Earthworkin all soils except hard rock requring blasting and conveying for formation of bund with lead of 0 to 100 metre deploying earth moving machinery and tippers, including benching, formation of bund,breaking clods, sectionig etc. completeSI No;54 |
| 2 | Earthwork excavation for foundation to the full depth as may be directed by departmental officers in all types of soils except in hard rock requiring blasting but inclusive of shoring, strutting and bailing out water wherever necessary, refilling the sides of foundation with excavated soil in layers of 15cm thick well rammed and consolidated and depositing the surplus earth in the places shown by the departmental officers with initial lead of 10 Meters and initial lift 2 Metres and clearing and levelingthe site etc.complete complying with standard specification. |
| 3 | Manufacturing and Supply,Fixing of the Cement Concrete Blocks of Size 20 x 20 x 15 cm in M20 Grade Mix and dry Packing them in apron or revetments and the cost shall inclusive all materials,conveyance with necessaary Moulding Charges and labour Charges etc.,Complete |
| 4 | Collection supply and filling of gravel filling approved quarry including cost andConveyance of all materials to site and all labour charges for filling etc., Complete. |
| 5 | Collection supply and filling of Stone Dust filling approved quarry including cost andConveyance of all materials to site and all labor charges for filling etc., Complete. |
| 6 | PlainCement Concrete 1:4:8 mix (One Cement, Four Fine Aggregate and Eight Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNBP No.28). |
| 7 | Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86. For Side Wall |
| 8 | Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. |
| 9 | Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete with std.Specifications.(Using Vibrator)TNDSS NO: 30 V, VI (S3), VII-3. |
| 10 | Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3. |
| 11 | Supply and fixing GS Pipe 32mmdia Bclass includingCuttingand fiixing In kerdwall and provinding weld mesh of size 950 x500 mm size 90 gauge and proving MS flat 35 x 6 mm size at the middle angle allowed of size 25x25x5mm including cost convenyence and welding with weld mesh etc complete |
| 12 | Paintig New iron works Such as steel doors, windows bars,balustrades etc. with two coats ofbest approved first quality and colour of synthetic enamal paint over one coat of red oxide primeing coat in all floors including cost of primeing coat etc complete complying with standard specification. 9The make quality and colour of paint should be got approved by the Executive Engineer before use on works) |
| 13 | Providing, Laying, Spreading and compacting graded stone aggregate to Wet Mix Macadam for 150mm thick specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density,including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers MOST 406 |
| 14 | Supplying and laying Precast Designer Paver Block confirming to IS 1568-2006 specification manufacturing and laying standard of M40 grade 63 mm thick (table clauses 5 and 9.14) suitable for bus terminals industrial complexes road on expensive soils etc., including the cost of paver block of size 225mm x 12.50 mm x 63mm and conveyance of materials to work site mentioned in the tender schedule cost of loading and unloading handling during over sand bed of 150mm thick (excluding the cost of sand) conveyance paver block cutter to site and hire charges of vibrators and block cutter operator and labour for leveling the sand to paver block etc., complete ISI 15658-2006. |
| 15 | Supply and Fixing of Stone Bench with Chair type and fully dressed stone of Size length 1.50 m Breadth,0.45 m Total Height 0.80 m Including Cost and Conveyance of All materials and Labour charges etc., Completed |
AI Tender Summary
Tender Timeline
Jul 11, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 19, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender