Providing Furniture To The Proposed Manuscipt Block In S V Vedic University Tirupati , Supply Of Open Iron Rack Of Size : 905 Mm X 450 Mm X 2430 Mm With The Following Specification With The Metallic Painting .Panel Shape Shall Be Bent To The As Per Drawing So As Affix The Same To The Channels,Width - 905 Mm With The Tolerance Of (+) Or (-) 10 Mm, Depth - 450 Mm With The Tolerance Of (+) Or (-) 10 Mm, Height - 2430 Mm With The Tolerances (+) Or (-) 10 Mm , Size Of Ms L Angle For Vertical (Size Of Angle Is 40 X 40 X 2.0 Mm), Angular Mf Thickness 2 Mm( Verticals), Panel : Mf Thickness 1 Mm, Panels 25 No Of Panels For One Racks, (The Rate Quoted Shall Be Excluding Gst As Applicable),Supply And Fixing Modular Workstation 75Mm Thick Tile / Glass Based System. Partition Frame (1200Mm-H) Is Free Standing And Self Supporting Having A Thickness Of 75Mm Internal Steel Frame Work Comprising Of Vertical Sections Made Out Of 18Swg Crca Steel Formed Into Channel Duly Powder Coated. These Vertical Channels Will Have Necessary Slots To Accept Panel Mounted Components. They Also Have A Provision Of Accepting The Cladding Of Various Finishes. The Horizontal Members Of This Frame Work Are Made From Ms Rectangular Tubes Of Size 40Mm X 20Mm X 1.2Mm Thick. The Joinery Of These Frame Is Simple And Effective In Order To Install The Partition In Any Derived Configuration And Also To Dismantle And Reinstall In Any Other Altered Configuration. Two Adjacent Frames Are Connected To Each Other By Means Of M8 Sized Nuts And Bolts. Electrical Raceway Will Be Provided At The Skirting Level With Removable Panel For Maintenance. Top Trims And End Trims:- Fabricated Out Of Extruded Aluminium, Section Designed To Fit With The Frame. End Trims Will Be Provided With Aluminum Casting Bush At Top. Finish All Metal And Aluminum Parts Are Powder Coated After Necessary Treatments (Minimum 50 Micron) Tile The Tiles At Both Sides Of The Frame Will Be Of 9Mm Thick Mdf Board And 5Mm Thick Plain Glass, Fixed To The Frame, Powder Coated After Necessary Treatment. Four Way Post Way Post(1200Mm-H) A Four Way Post At Centre Will Be Provided To Connect The Partition From All The 4 Sides The Post Is Fabricated Out 50Mm X 50Mm Square Tubular Section, Powder Coated After Necessary Treatment The Top Of The Post Will Be Covered With Casting Bush Of Matching Colour . Work Top Will Be Fabricated Out Of 25Mm Thick Prelaminated Particle Board, Design Made Using Pin Router Machine And Edge Banded With 2Mm Thick Pvc Strips Of Matching Colour Using Hot Melt Glue / Each Workstation With Keyboard Tray Size Of 510Mm L X 240Mm W X 35Mm Ht. Metal With Telescopic Runners, Mobile Pedestal - Size Of 400Mm X 450Mm,Supply And Fixing Of Senior Executive Table Table, Made With Mdf 18 Mm Mdf Top With Pvc Foil With 25 Mm Mdf Strip With Pvc Foil With T - Shape Aluminium Beading, Body 18 Mm Mdf Board With Pvc Foil Modesty With Side Planks With Side Plants With T-Shape Beading Body, Size : 1800 Mm (L) X 900 Mm (D) X 750 Mm (H) With Side Runner Size: 900 (L) X 450 (D) X 750 (H) Made With 18 Mm Plb Board Body With 2Mm Edge Binding With One Shutter With 3 Draws Made With 18 Mm Mdf With Pvc Foil. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete (Excluding Gst),Supply And Fixing Of Executive Chair Made Of Nylon Frame With Pu Moulded Foam With Regsin Upholstery With Attached Headrest Seat Ply Based Pu Moulded Foam And Reczin Covering Arms Fixed Aluminium Arms Connect To Seat And Back Mechanism Knee Tilt Mechanism With Any Position Height Adjustable Range Of 18-52 Inches Base: Aluminium Base With Caster Wheels. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete (Excluding Gst),Supply Of Office Table With Overall Size 1199Mm (W) X 590Mm (D) X 735Mm (H) With Following Specifications Fabricated Out Of Mild Steel 0.8 Mm Thickness Cr Sheet Having 3 Drawers On Right Side Mounted On 25Mm X 25Mm 1Mm Thick Tubular Frame Duly Painted After Necessary Treatment And Provided With Godrej Lock Top. Fabricated Out Of 18Mm Thick Pre - Laminated Particle Board Duly Edge Banded With 2Mm Thick Pvc Beading. The Rate Inclusive Of All Taxes And Incidental Charges Etc., Com Plete. (Excluding Gst),Supply Of Low Back Revolving Chair With Following Specifications: Overall Dimensions: Width Between Arms(Outer To Outer) 58.0 -61.0Cm. Depth(Outer To Outer) 58.0Cm,Height:98.5-106.0, Cms Back Size 47.0Cm X 55.0Cm, Seat Size:50.0Cmx52.0Cm. Tolerance +/- 1.00 Cm,Swivel Chair With Mesh Back, Back Support Adjustable, Arm Rest Adjustable Up And Down Pu Top.Mechanism Tilt With Locking. Base Nylon Base With Nylon Castor. Seat Pu Moulded Cushion.Gas Lift Up And Down Adjustable. The Centre Pivot Mechanism Is Designed In Such A Way That 360 Degrees Revolving Type. The Rate Of Inclusive Of All Taxes And Other Incidental Charges Etc Complete(Excluding Gst).,Supply Of Visitor Chair With Over All Dimensions:55.0 Cm X 61.0 Cm X 80 Cm, Seat Height 43.0 Cm(H),Back Size:49.0Cm X 47.0Cm,Seat Size 49.0Cm X 44.0 Cm. Tolerance +/- 0.50Cm, Back Rest 49.0Cm X 47.0 Cm, Seat Size 49.0Cm X 44.0 Cm. The Seat And Back Are Made Up Of Hot Pressed Supply Of Visitor Chair With Over All Dimensions:55.0 Cm X 61.0 Cm X 80 Cm, Seat Height 43.0 Cm(H),Back Size:49.0Cm X 47.0Cm,Seat Size 49.0Cm X 44.0 Cm. Tolerance +/- 0.50Cm, Back Rest 49.0Cm X 47.0 Cm, Seat Size 49.0Cm X 44.0 Cm. The Seat And Back Are Made Up Of Hot Pressed Plywood, Uphoistered With Fabric And Moulded Ployurethane Foam. Tubular Arm Rest Support Are Made Of 1 Inche X 14 Guage Tube And Black Powder Coated.The Inclusive Of All Taxes And Incidental Charges Etc Complete(Excluding Gst)
