}

Patch Repair And Flood Restoration Work On Various Roads In Sub Dn. Dudu Under Pwd Division Dudu, Dudu-Rajasthan

Public Works Department-PWD has published Patch Repair And Flood Restoration Work On Various Roads In Sub Dn. Dudu Under Pwd Division Dudu. Submission Date for this Tender is 21-07-2022. Road Work Tenders in Dudu Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

33033540
Corrigendum : Patch Repair And Flood Restoration Work On Various Roads In Sub Dn. Dudu Under Pwd Division Dudu
Open Tender
Indian
Rajasthan
Dudu
21-07-2022

Tender Details

Patch Repair And Flood Restoration Work On Various Roads In Sub Dn. Dudu Under Pwd Division Dudu

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 14-Jul-2022 Special Condition Other 21-07-2022

Key Value

Document Fees
INR 1000 /-
EMD
INR 132960.0 /-
Tender Value
INR 66.48 Lakhs /-

BOQ Items

Name of Work :- Patch Repair and Flood Restoration work on Various Roads in Sub Dn. Dudu under PWD Division Dudu.
Sl. No. Item Description
1Clearing grass and removal of rubbish up to a distance of 30 m outside the periphery of the area as per MoRTH Specification Clause 201 By Manual Means
2Restoration of rain cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per drawings and MoRTH specifications Clause 3002 Manual Means
3Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per MoRTH specification Clause 404
4Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre-mix carpet and seal coat type B as per MoRTH specificationClause 3004.2
5Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 13mm thick pre-mix carpet and seal coat type B as per MoRTH specificationClause 3004.2
6Painting two coats with superior grade synthetic enamel paint of approved quality to give an even shade including writing lettering and figures with synthetic enamel paint as per IRC specifications.
7Ordinary Kilometre Stone
8Direction & Place Identification sign boards including painting of posts.
9Supplying, filling and stitching of empty cement bags either of plastic or jute with earth available at site, of weight not less than 40 Kg., including excavation etc. complete.
10Supply of Hydraulic Excavator 0.9 cum including Driver, POL, T&P and Maintenance etc.
11Stone masonry work in cement mortar in foundation complete as per drawing and MoRTH specifications Clauses 1402, 1405, 2102 & 2104. Random Rubble Masonry In 1:4 cement mortar
12Plastering with cement mortar (1:4), 20 mm thick on Stone work.
13Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 80 mm as per drawings and as per IS 15658:2006.and all materials shall conform to MoRTH Specification Clause 602 with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks. Category "B" : Dentated only two side like I,Z,T shape as per IRC:SP:63-2004
14Providing and filling joint sealing compound in CC Pavement / Structures as per drawings and MoRTH specifications with coarse sand and 6 per centbitumen by weight
15Providing and fixing of Reinforced Ferro cement Drain cover designed for class "AA" loading duly marked on cover with adequate steel reinforcement having thickness 75 mm to 150 mm anti- corrosive bitumen painted M.S. plate Rim and on M.S. lifting hooks admixture like plasticizer bond improving compound shrinkage resistance compound abrasion resistant complete as per approved design etc.for drain Opeining Size 300 to 450 mm Standard Drain Cover Size 600mm x 800mm x 75mm
16Repairing of potholes with minimum 25mm depth with high performance curing free, quick-setting cement mortar “INSTACEM-HD” of “CEMECO” make in the ratio of 1:1.5:2 with following properties of high performance cement : Compressive strength of 10 MPa within 4 Hours, Curing free, bond strength of 4 MPa within 24 Hours, Non shrink & Non toxic.
17Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing and Specifications.900 mm equilateral triangle
18Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 Mtr. and lift up to 1.5 Mtr. All kinds of soil
19Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300-1 and 300-2 with a lead upto 50 m as per MoRTH Specification Clause 305.3
20Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400-1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[MoRTH specification : Clause 401]. By mechanical means. For Grading-I Material
21Barricating with Sal ballies as per design including tying with vertical post by coconut strings including digging out holes in all types of soil complete in all respect with two horizontal members height 1.2 m upto 1.5m above ground level and vertical supports upto 2.5 centre and upto 3 days period including removal and cleaning the site complete in all respect &including dressing of sides in all types of soil.
22Mud Mortar including specified ingredients.
23White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per MoRTH specifications Clause 800
24Conducting Traffic Census at Traffic Count Station including collection of data during census, tabulation and computerised information preparation arrangement of lighht, furniture for sitting of two persons, installation and maintenance of tent materials, banners sign boards etc. during census engagement of at least metric educated two persons per shift of eight hours etc. complete as directed by Engineer-in-charge for a period of seven days.
25Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat,making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as perIRC : 99-1988 3.70 meter wide and 10 cm high for general traffic
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail