Supply Of Instruments For Testing Of Water Quality In Laboratory Phe Division Ujjain- Microprocessor Based Conductivity-Tds Meter, Ph System, Nephelo - Turbidity Meter, Electronic Single Pan Balance, Weightbox , , Ujjain-Madhya Pradesh
TDR : 33032957
Tender Notice
BOQ
Expired
Ujjain
Madhya Pradesh
Supply Of Instruments For Testing Of Water Quality In Laboratory Phe Division Ujjain- Microprocessor Based Conductivity-Tds Meter, Ph System, Nephelo - Turbidity Meter, Electronic Single Pan Balance, Weightbox ,
Name of Work: -Supply of Instruments for Testing of Water Quality in Laboratory PHE Division Ujjain
Sl. No.
Item Description
1
Microprocessor based Conductivity-TDS Meter T-308 (NABL Calibrated) with 2 year warranty and AMC Range - 0.1µS to 100 mS (6 decadic range )Accuracy - ± 1% of Full scale ± 1digit Resolution - 0.001 µSTDSRange - 0.1 PPM to 100 PPT (6 Decadic Range )Accuracy - ± 1% of Full scale ± 1digit TemperatureRange - 0 To 100 degree Celsius ( Auto/ManualResolution - 0.1 degree celsiusAccuracy - ± 0.2 degree celsius ± 1 Digit Cell Constant- Acceptable from 0.1 to 5.0 Auto Temperature Compensation-0to 100 degree Celsius with PT-100 Sensor Manual Temperature Compensation-0 to 60 degree Celsius user selectable Conductivity Tem. Co-efficient0.0% to 9.9% user selectable Display7 digits, 7 segment LED.(3 digits for temp/ tempco. And4 digits for Conductivity/TDS )With autometic decimal point selection TDS Factor0.00 to 9.99 user selectable Printer PortEpson Compatible 80 column Dot MatrixPower230 v AC ± 10%, 50Hz.Dimentions 250(W) X 205(D) X 75(H) mmWeight 1.25Kg (Approx)Standard Accessoriesi) Conductivity Cell, Cell Constant 0.1 ii) Coductivity Cell, Cell Constant 1.0iii) Temperature Probe (PT-100 Sensor )iv) Stand & Clamp v) Instruction Manual and warranty card.
2
pH System (model no. 361) is an intelligent high resolution and precise instrument. It measures pH of a solution, using a pH electrode. The unit can also measure millivolt (mV ) generated by the sensing electrode it is named as mV-Absolute a 7 pH solution. Facility to measure temperature using a Pt 100 sensor is also provided.(NABL Calibrated) with 2 year warranty and AMC. The unit housed in a compact, shock / proof & light weight injection molded cabinet PH Range- 0 to 14 pHResolution - 0.01 pHStability- 0.01 pH per hourRelative Accuracy- ±0.02 pH ± 1 Digit Slope- 85% to 115%Standard Buffers - 7.000, 4.004 or 9.183Buffer Deviation- ±0.5 pHOther working buffersMvRange - 0 to ±1999 mVResolution - 1mVAccuracy- ± 1 mV ±1 DigitTemperatureCompensation- Auto/ManualRange - 0 to .99.9° CResolution - 0.1° CAccuracy- ±0.5° C ±1 DigitDisplay7digits,7segment LED (3 digits for temp. and 4 digits for pH)AnnunciationWith auto-polarity and decimal point. Mode annunciation by LedData StoragePrinter PortEspon compatible 80 column Dot MatrixPower230 V AC ± 10%, 50 Hz.Dimensions250(W) X 205(D) X 75(H) mm.Weight1.25 Kg ( Approx )Accessoriesi) pH Electrode (combined) ii) Temperature Probe (PT-100 Sensor)iii) Electrode Stand & ClampOptionalAccessoriesi) Redox Electrode ( Pt. Electrode )ii) Calomel Electrodeiii) 80 Column Dot Matrix Printer
3
NEPHELO - TURBIDITY METER 132is an accurate and elegent instrument designed for conducting nephelometric and turbidity measurements of suspended particles and colloids in solution. The principle of operation of this instrument is based on the well-known Tyndall effect. A beam of light passing through a turbid liquid being tested. scatters the light which, in turn, is collected at right angles by a Photodiode and indicated in a display. The amount of scattered light is proportional to the turbidity of the solution under test. The application of turbidity measurements are vast in Municipal, Public Health, Sewage Works and in Industrial Establishment for determining quality of water/waste water.(NABL Calibrated) with 2 year warranty and AMC.Ranges0 -1000 NTU in 4 Ranges 9 Automatic) (a) 0-1 NTU(b) 0-10 NTU( c ) 0-100 NTU(d) 0-1000 NTUAccuracy±1.5% of FSD in 0-500 NTU ±2% of FSD in 500-1000 NTURepeatability ±1% of FS (Std.)SourceLEDDetectorPhotodiodeDisplay2 Line 16 Ch. LCDCalibrationFormazine Standard SolutionData StorageCalibration & Data Stored in Memory Printer PortEpson Compatible 80 Column Dot MatrixPower230 Volts ± 10%, 50 HzDimensions160(W) X 200(D) X 100(H) mm. Weight1.5 Kg (Approx)AccessoriesFlat Bottom Test tubes-(25 mmØ) 4 Nos. & Light Shield
4
Electronic Single Pan Balance Capacity 200 gm Least Count - 0.1 mg8 with demo & technical training including One year Warranty (NABL Calibrated) with 2 year warranty and AMC.
5
Weightbox E-2,23 weights including fractional weights 200gm maximum with (NABL Calibrated) with 2 year warranty and AMC.
6
Bacteriological Incubator 12 x 18 Inside Diamention Electronic Temperature Display (NABL Calibrated) with 2 year warranty and AMC.
7
Auto Clave ( for sterillization ) vertically wing nut locking stainless steel ( Economy ) Certically Electronic ( 10 x 18 ) 250 x 450 mm capacity 22Litre (NABL Calibrated) with 2 year warranty and AMC.
8
Hot Air Oven with Electronic display 12 x 12 Lab Tech. Qwine well with one year warranty as per condition of manufacture and NABL Calibration with digital temperature (NABL Calibrated) with 2 year warranty and AMC.
9
Membrane Filter Assembly
10
Single channel Micropipette1. should be ergonomic with soft grip and working comfort during operation.2. Should have large grip for easy operations 3. Should have variable volume, easy volume, adjustment by simply turning plunger. 4. should have universal tip cone.5. Should have soft click sound at very increment ensure perfect volume setting, also single handed operation.6. should have 4 digits digital display with sub division for small volume setting. 7. should have built in streamlined tip ejector. 8. Pipette will supplied with calibration tools for re-calibration. 9. Supplied with pipette holder allows easy, effective and safe storage.10. Pipette should be fully autoclave able. 11. Instrument supplied with NABL / ISO 17025 calibration certificates, calibration as per ISO 8655 standard 12. Manufacturer should have ISO: 9001, ISO: 13485, ISO: 17025 and CE certificate.13. Instrument has free replacement warranty for two years, also provides a two times free recalibration service and service support for trouble shooting.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
