|
| 1 | Demolition of Brick work or stone/ boulder masonary built in Cement mortar complete all as specified & directed |
| 2 | M & L for brick work with sub class `B\" brick (Old size) straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified & directed. |
| 3 | Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition)such as cooking platform, chajjas etc |
| 4 | M&L reinforced cement concrete1:1.5:3 type A1 (using 20 mm graded stone aggregate) as in lintel beams, cantilever, bressummers, lintels over 1.5 m clear spanetc complete all as specified & directed. |
| 5 | Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed. |
| 6 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 7 | M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 8 | Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed. |
| 9 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces,second layer (finishing coat)mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer\"s instructions and finished the surfaces even and fair without using extra cement complete all as specified & directed. Note:Liquid WPC will be measured and paid separately. |
| 10 | M&L 15mm thick Rendring in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified & directed . |
| 11 | Supply only water proofing compound (liquid),ISI marked complete all as specified & directed. |
| 12 | Roughening surface of old concrete by picking, sweeping, cleaning & washing down with water to remove dust etc. and brushing neat cement slurry @ 3 Kg /Sqm Complete all as specified & directed |
| 13 | M&L10 mm thick rendering on fair faces of brick /concrete surfaces in CM (1:4), with WPC (WPC measured & paid separetly) finished even and smooth without using extra cement complete all as specified and directed |
| 14 | M&L forPCC 1:2:4 type B-0 (Using 12.50mm gradedstone aggregate) in roof padding/kerbs/sunken slab etc complete all as spd and directed, |
| 15 | M&L brushing neat cement slurry with 3kg of cement per square meter complete all as spd and directed, |
| 16 | M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :-(i) Properly cleaning and drying concrete surfaces.(ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm.(iii)Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm.(iv) Laying unrolled over the bitumen coat surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction.(v) Applying a coat of aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. NOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed. |
| 17 | M & L for preparation of newly plastered surfaces ofwalland applying two coats of oil bound distemper over a coat primer over and including 3 mm thick wall care putty including preparation complete all as specified and directed. |
| 18 | M&L for prepartion new plastered surface of wall and applying two coat of cement base paint over a coat primercomplete all as specified & directed. |
| 19 | M&L for applying 3mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 20 | M&L for applying two coats of oil bound distemper on old plastered wall surface complete all as specified and directed. |
| 21 | M&L for applying 3mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 22 | M&L for applying two coats of oil bound distemper on ceiling on old surfaces complete all as specified and directed. |
| 23 | M&L for prepartion old plastered surface of wall and applying two coat of cement base paint complete all as specified & directed. |
| 24 | M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed. |
| 25 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 26 | M&L Preparing old wooden surfaces exceeding 10Cmwidth or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 27 | M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 28 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified & directed. |
| 29 | M & L for Vitrified Ceramictiles light shade polished (square / rectangular) of 10mm thick, area of each tile exceeding 0.36 sqm but not exc. 0.42sqm as in floor and including 15 mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 30 | M & L for Non skid colour tiles of 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc. over and incl 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 31 | M&L for glazed ceramics coloured tiles of size 450x300x 7mm to 350x275x7 thick in vertical surfaces such as on skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed. |
| 32 | Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame)complete all as specified and directed |
| 33 | Ditto--- as per Srl itemNo 33.00 but exc 1.5 Sqm but n.exc. 4 Sqm each complete all as specified & directed. |
| 34 | S&F Steel ventilator with top hung shutter including, hinges, peg stay, lugs (MS hold fast)complete all as spd and directed |
| 35 | S & F of mild steelframed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks acomplete all as specified and directed. |
| 36 | S & F steel window with side hung shutters including projecting or box type hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5 mm flat iron etc complete all as specified and directed. |
| 37 | ~Ditto~ All as per item No 37.00 above but without glazing bars complete all as specified and directed |
| 38 | S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as specified and directed. |
| 39 | S&F 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut metered bead and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed. |
| 40 | S&Fin repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified. |
| 41 | S&F Pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc of size 125mmX60 mm made out of 1.25mm thick MS sheet , complete all as specified and directed. |
| 42 | S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 43 | S & F 28 to 30 mm(stiles) Factory Made Solid PVC Moulded door shutter with particle board core , with 2, 3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, in frame at site as per specification & drawings as given in SSR part - II (2020 print) on serial page No. 179complete all as specified and directed. |
| 44 | S & F in repair 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including teak wood lipping, 6 mm thick on sides complete for cupboard shutterand incl shelves complete all as specified and directed. |
| 45 | S & F of 100 mm size aluminium anodised hasp and staple safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 46 | M & L for Post construction Antitermite Treatment of soil under existing floors using emulsion @ one ltr per hole , 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 ( 1 cement : 2 coarse sand ) to match the existing floors complete all as specified and directed. |
| 47 | M & L for Post construction Antitermite Along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 ltr per linear meter including drilling and plugging holes etc in apron complete all as specified and directed. |
| 48 | S & F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 49 | M & L PCC 1:2:4 type B0 (using 12.50mm graded stone aggregates) as in back filling of pressed steel frames and similar works inclduing necessry form work as required complete all as specified and directed. |
| 50 | S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete as directed |
| 51 | S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed... |
| 52 | SS&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 53 | S & F aluminium alloy anodised, slidingdoor bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy size 300 mmlong complete all as specified and directed. |
| 54 | S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed. |
| 55 | S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 56 | S&F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 57 | S&F Aluminium handles, cast type, anodized 150 mm sizeISI Marked complete all as specified and directed. |
| 58 | S&F in repair mild steel conduit curtain rod with PVC coating fancy type curtain rod 20 mm dia of any colour as approved complete all as specified and directed. |
| 59 | S&F mild steel Bracket and bulb with PVC coating fancy type for curtain rod 20 mm dia of any colour as approved complete all as specified and directed. |
| 60 | M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mmwideand 75mm deep joints shall be made at 3 mtr intervel andat each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3.complete all as specified and directed. |
| 61 | M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed. |
| 62 | M&L for hard core of broken bricks gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick watered and well rammed to a true surface complete as specified and directed. |
| 63 | M&L for 100mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate), as in sub base of floor finished even and fair Complete all as spesifiedand directed |
| 64 | M&L 50mm thick PCC 1:2:4 type B-1(using 20mm graded stone aggregate), as in floor finished even & fair Complete all as spesifiedand directed . |
| 65 | S&F in repair chromium plated central hole basin mixer single lever without popup waste system with 450 mmlong braided hoses complete all as specified & directed |
| 66 | S&F in repair PVC low level flushing cistern 10 ltr capacity including bracket fixed to wall & PVC high density tube 32 mm dia flush pipe complete all as specified & directed. |
| 67 | S&F in repair tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges inluding brackets complete complete all as specified & directed. |
| 68 | S&Fin repair Soap dish, stainless steel, as approved by EIC complete all as specified & directed |
| 69 | S&F in repair two way angle cock 15 mm bore fancy type brass chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. |
| 70 | S&F cabinet mirror, box type of size 19\" x 21\" of colour as approved fixed to wall complete all as specified and directed. |
| 71 | S&F in repair chromium plated health faucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete all as specified and directed. |
| 72 | S&F in repair chromium plated toilet paper holder with flap complete all as specified and directed.. |
| 73 | S&F in repair vitreous china WHB size 550mmx400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed. |
| 74 | S&F in repair 15 mm bore concealed type stop valves, cast copper alloy, screwed down, high pressure, with capstan head, fancy type, chromium plated, with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed |
| 75 | S & F in repair brass chromium plated shower rose fancy type with swivel joints ,125 mm dia with CP arms 300 mm long including fixing to steel pipe or unioncompleteall as specifiedand directed. |
| 76 | S & F in repairfor Vitreous China wash down water closet pan (pedestal pattern), white, fixing bolts, (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 77 | S&F in repair plastic water closet seat cover, cream/white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminum hinging device for pedestral pattern WC completeall as specifiedand directed. |
| 78 | S&F PVC (SWR) \"P\" or \"S\" trap for 110mm dia completeall as specifiedand directed. |
| 79 | S&F in repair bib tap 15mm brass chromium plated long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc fancy type complete all as specified and directed. |
| 80 | S&F in repair 600mm long PVC connection of size 15 mm with PTMT nuts etc complete all as specified & directed. |
| 81 | S&F in repairs5mm thick looking mirror 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 82 | S&F in repair Brass chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete all as specified and directed. |
| 83 | S&F in repairs 0.63 mm thick kitchen plate rack made of stainless steel 900mm x 750mm x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified and directed. |
| 84 | Taking down PVC/ACpipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 110/100/75 mmdia pipe complete all as specified and directed. |
| 85 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenchescomplete all as specified and directed. |
| 86 | ~Ditto~ all as per item No 86.00 above but 75 mm bore complete all as specified and directed. |
| 87 | S&F110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc complete all as specified and directed. |
| 88 | S&F clamp made out of 50 x 5 mm flatiron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 100 mm PVC pipe complete all as specified and directed. |
| 89 | S&F PVC (SWR)bend/shoes any radius of 110 mm dia complete all as specified and directed. |
| 90 | M/L PVC(SWR) Tee of110mm dia etc complete all as specified and directed |
| 91 | S&F PVC (SWR) bends any radius With access door of 75 mm dia complete all as specified and directed. |
| 92 | S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed. |
| 93 | S&F PVC (SWR) floor trap with grating including jointing with solvent cement 75 mm dia etc complete. |
| 94 | Taking up or down steel tubing & connections of pipe 15mm dia complete all as specified & directed |
| 95 | Taking up or down steel tubing & connections of pipe 20mm dia complete all as specified & directed |
| 96 | S & F 15 mm dia GI mild steel tube medium grade withall ISI marked fittings and fixed compete to wall and ceiling or laid in floor complete all as specified & directed. |
| 97 | S & F 20 mm dia GI mild steel tubemedium grade withall ISI marked fittings and fixed compete to wall and ceiling or laid in floor complete all as specified & directed. |
| 98 | S & Fin repair rotational moulded polyethylene water storage tank (Three layer) of capacity 500 litrs (Cylindrical vertical with closed top) hoisted and fixed on position all as specified in SSR Pt I complete all as specified & directed. |
| 99 | S & F of 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gram) complete all as specified and directed. |
| 100 | M&L for screed bed of bedding layer of cement mortar (1:4) 20 mm thick for laying floors finishes completeall as specified and directed. |
| 101 | M&L chequred cement concrete tiles 20cm x20cm 25mm thick for laying floors finishes set joint & painted with grey cement slurry mixed with pigment to match the shade of slab/tiles complete all as specified and directed. |
| 102 | M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 103 | Cutting chases in brick wall, etc for concealed water tubing ,etc & making goodin CM 1:3 , cutting not exc 10 cm girth complete all as specified & directed. |
| 104 | Dismantling posts or strut (wood , steel or RCC) any section , including taking out embedded portion and making good disturbed ground |
| 105 | Dismantling of fencing wire mesh or barbed wire fencing, any type complete all as specified and directed. |
| 106 | Excavation of post hole (or similar holes)each not exc0.50 cum in soft /loose soil ,getting out ,returing filling in and raming earth or brokenrublemixed with earth around in layers not exceeding 25 cm ,watering,and removing surpl soil to adistence n. exc50 mand makinggood suraface complete all as specifiedanddirected. |
| 107 | M&L for 18 mm thickgranite slab (of any type) work(table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete. |
| 108 | S& F MS post and strutin fencing includingcutting top to shape as directed ,driling holes ,noatching for wire etc ,flat ironfilet (for securing wire mess etc)including all necessary drilling holes notchingor riveting etc,and similar work conforning to Fe-410 or FE-310 complete all as specified and directed. |
| 109 | S&F Mild steel10mm dia and above round bar fixed to chain link Fencingall as specified &directed |
| 110 | S&F chain linkfencing in 4mm dia mild steelgalvansiedwire meshn.exc 4 kg per sqm 100 x 100 mm diagonal shape, mesh, made up, including link line wire, in fencing including straining and fixing to wood, concrete or steel posts and or to straining bolts, including securing with and provision of galvanised iron tying wire galvanised iron staples or steel pins/nuts and bolts etc all as directed by Engr-in-Charge. |
| 111 | S&F for galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standered rails straining bolts including securing or typing at crossing with and provision of ganvanised MS wire stapples or steel pins etc as directed (each line wire to be measured) |
| 112 | M&L5 mm thick rendering on fair faces of bk /concrete surfaces as on ceilingin CM (1:3), finished even and smooth (without using extra cement ) complete. |
| 113 | Taking down carefully copper / aluminium point wiring (light, fan, switch, socket or power, Bell & Two way point) complete with fitting such asswitches, sockets, ceiling rose, sketch light fittings etc, and making good the disturbed surface ofwalls and floors etc complete all as specified and directed. |
| 114 | Taking down carefully main switches DB\"s/ MCB DB\"s with MCB and making good the disturbed surfaces of wallscomplete all as specified and directed. |
| 115 | Taking down carefully copper / aluminium sub mainwiring including teak wood batten / conduit and making good the disturbed surface of walls complete all as specified and directed. |
| 116 | M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including 1.6mm thick anodised pressed steel sunken box covered with 3mm thick hylum sheet for mounting switches, sockets, fan regulators etc for the following complete all as specified and directed. Make of Cable : Polycab/Havell\"s/Finolex and Make of PVC conduit : Plaza/Harsh/Kalinga Premium/AKG:- |
| 117 | One light/fan point controlled by one switch complete all as specified & directed |
| 118 | One bell point controlled by one switch complete all as specified & directed |
| 119 | One 5 Amps socket out let point controlled by one switch on same board with other switches complete all as specified & directed. |
| 120 | One 5 Amps socket out let point on independent board controlled by one switch complete all as specified & directed. |
| 121 | ~Ditto~all as per Sch A Item No- 126.00 above but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 1.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch complete all as specified and directed.. |
| 122 | S&F, Switch Piano, flush type, single pole, one way, 5 Amps, 230 Volt grade, ISI marked complete all as specified and directed. |
| 123 | S & F socket outlet flush type multipurpose 2 in 1, 5 pin 5 Amps 230 volts complete all as specified & directed. |
| 124 | S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 240 volts complete all as specified & directed. |
| 125 | Supply and fixing switch piano flush button single pole one way 15 amps, 230 Volts complete all as specified and as directed. |
| 126 | S&F ceiling rose surface bakelite 63.5mm dia three terminals fixed, complete all as specified & directed. |
| 127 | Supply & fixing for electronic Fan regulator 450 watt step type complete all as specified and directed. |
| 128 | Supply and fixing multi music Bell, AC 240 Volts,single pole complete all as specified and directed. |
| 129 | S&F lamp holder insulated body with back plate for batten/ angular fitting complete all as specified & directed. |
| 130 | Supply and fixing LEDtuberod 18 watt 230 voltT 8 type made up of polycarbonate with in built electric electronic drver both sided connection with metal heat sink complete fixed with wall/ceiling incl fitting accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size complete all as specified & directed. Make- Havells, Cat No CRYSTAL1213T8DSTL18WLED865SGLASS or equivalent model of Bjaj/philips/Crompton. |
| 131 | M & L for Rigid non metallic PVC conduit ISI marked, medium grade, inclusive of all fitting such as tees, bends. Juction boxes, elbows saddles. Pipe hooks, couples and lock outs etc 25 mm external dia, fixed on surface mounted complete and making good disturbed surfaces in repairs complete all as specified & directed. |
| 132 | S&F LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size including 1 No tube 18/20 Wall as specified. Make-Crompton Greaves, Model No: DMLN1LT8-16 or equivalent model of Baja/ Havells |
| 133 | Supply and fixingdouble door SPN DBs eight wayof powder coated DB\"s suitable for MCB\"s fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed . |
| 134 | M/L for provision of sub main wiring with two runs of single core PVC insulated unsheathed 4 Sqmm mutistranded copper conductor 1100 volts drawn inPVC conduit with incl PVC insulated unsheathed multistronded copper conductor 2.5 sqmm as earth continuity and connected of common earth dolly all as specified& directed by Engr-in-Charge.Note:-PVC conduit shall be measured and paid seprately |
| 135 | S&F MCB SP of capacity 5 - 32 Amps 240 volts, 10 KA breaking capacity \"C\" series incl connectioncomplete all as specified & directed. |
| 136 | Supply and fixing MCB SPN 5 to 32 amps 10 KA, C-series including connection complete all as specified and directed by Engr-In-Charge. |
| 137 | Earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6.30mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to and including GI earth lead of Gi wire 4 mm size by means of steel bolts,nuts, check nuts and washers, PCC 1:2:4 type B-1 in pit, angle iron 25X25X3mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways abd 12mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mess and light grade GI protection pipe 20mm bore upto 7.5m length for drawing in earth lead ,salt,charcol etc. including excavation and earth work in any type of soil , removal of surplus soil to a distance not exceeding 50m complete all as shown in electrical plate No. 3 of MES schedule 2009 part-I and connected complete all as specified including testing on completion |
