Military Engineer Services-MES has published Repair Maintenance Of Submersible Vertical Turbine Centrifigul Pump Motors And Electric Starter Panels And Switch Gears Of Water Supply Swimming Pool And Sewage System Installations Incl Repair Maintenance Of Dosing Plants Repair To Ci Gi Pipe Lines A. Submission Date for this Tender is 05-08-2022. Gear Product Tenders in roorkee Uttarakhand. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 28-Jul-2022 | Fee corrigendum | Fee | 29-07-2022 |
2 | 29-Jul-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-08-2022 |
Sl. No. | Item Description |
1 | M&L for assembling, installation, lifting /lowering of deep well vertical turbine or Submersible pump set assembly having discharge capacity 10,000 to 30,000 gallons per hour in existing bore well after carrying out necessary repair / replacement work including connecting column pipes, line shaft with guide spiders and rubber bushes etc duly installation, commissioning and connected with hollow shaft electric motor or submersible pump of any capacity including making all necessary adjustments and electric connections as required for satisfactory performance of the pump complete all as specified and directed. |
2 | Notes:- (i) All types of T&P andtransportation etc to be arranged by the contractor for lifting and lowering of the Pump sets. (ii)All electrical connection of the motor shall be disconnected/reconnected very carefully. (iii) Contractor shall carryoutthe repair forthwith after getting the massage from AGE E/M /JE E/M either verbally or telephonically. A penalty of Rs 200.00 per day per pump shall be imposed to the contractor on account of wilfull delay on contractor"s part in the opinion of the Engineer-in- Charge. (iv) Spare parts shall be measured and paid for separately at S&F rates. |
3 | S&F in replacement, the following spare parts of deep well vertical turbine pump set having discharge capacity 10,000 to 30,000 gallons per hour at 60 metre head complete allas specified and directed by Engineer-in-Charge:- |
4 | Pump shaft made of antimagnetic stainless steel of size 38 mm dia or of existing size suitable for seven stage pump as per site requirement. |
5 | Mild steel line shaft 30 mm dia 10 feet long with one coupling and one stainless steel sleeve |
6 | Mild steel coupling for line shaft 30 mm dia |
7 | Guide spider heavy duty with rubber bush and check nut suitable for 30 mm dia line shaft and 150 mm bore column pipe. |
8 | Mild steel collet impeller lock. |
9 | Gun metal T T bush of the existing size including gland packing. |
10 | Gun metal bush for suction case. |
11 | Pump top shaft check nut with keys. |
12 | Antimagnetic stainless steel top shaft 5 feet long 30/38 mm dia or of the existing size. |
13 | Gun metal neck ring |
14 | M&L for cutting of line shaft of any size in any length as per site requirement and re-threading the same complete all as specified and directed. |
15 | M&L for cutting of 150/ 125/ 100 mm dia bore column pipes in required length and re-threading upto 80 mm from end complete all as specified and directed. |
16 | S&F lowering in replacement, Bowl assembly suitable for 150 mm bore discharge and suction, seven stage vertical turbine pump of discharge capacity 20,000 gallons per hour at 60 metre head, water lubricated type with cast iron bowls, Gunmetal impeller, Gunmetal neck ring, Gunmetal bush suitable for discharge case, suction case and bowls, rubber bush for pump shaft, stainless steel pump shaft 38 mm dia, mild steel collet impeller lock etc complete all as per manufacturer’s design and directed by Engineer-in-charge. Make / Jyothi, KSB, Chandra, Johnson |
17 | S&F in replacement, 150mm bore mild steel cold ERW column pipe 10 feet long and 7.20 mm thick wall withflanges welded at both ends including rubber gasket, nut bolts & washers of the existing size or of suitable size complete all as specified and directed. |
18 | S&F in replacement, 35 Sqmm nominal size 1100 volts grade AC, ISI Marked, PVC insulated flexible, flat, three core, stranded copper conductor cable complete all as specified and directed. |
19 | S&F in replacement,10 mm thick mild steel flange duly drilled, fixed to 100/ 125/150 mm bore existing mild steel column pipe with and including cutting threading and welding three numbers 150 mm long 40x6 mm flat iron pieces, one end welded to flange and the other end to column pipe complete all as specified and as directed |
20 | Taking out existing non clogging defective deep well vertical turbine pump set assembly of any capacity from existing sewage sump well including dismantling and removal of blockage from pipe, non-return valve, foot valve, vertical turbine pump etc, lowering of the same including testing after proper assembling, installation and commissioning complete all as specified and directed. |
21 | M&L for disconnecting and dismantling of existing 10 to 50 HP non clogging vertical tubine sewage pump / non clogging centrifugal pump set for general servicing/ repair including replacement of following defective parts, re-assembling and installation in its original position, commissioning & testing complete all as specified and directed. |
22 | Ball bearing No. 6306 / 6311 Make : SKF/NBC |
23 | Ball bearing No. 6208 / 6210 Make : SKF/NBC |
24 | Gun metal bush of suitable size for pump. |
25 | Stainless steel shaft for pump of the existing size at site. |
26 | Cast iron impeller of existing size |
27 | Cast iron sleeve for bearing housing and pump shaft. |
28 | Gland box / stuffing box with gland plate. |
29 | Gland plate struts of existing size with one nut. |
30 | Mild steel coupling of required size drilled including key & nut-bolts, for coupled pump with motor. |
31 | Rubber bush of suitable size for coupling of sewage pump coupled with motor. |
32 | M&L for cleaning of existing sewage sump of size 5 metre dia and approx 8 metre deep including de-watering of sewage water and taking out of sludge, night soil, foreign materials found inside the sump, after dewatering sewage water cleaning of all existing valves, sides & bottom of sump with clear water and pumping out balance water from the sump complete all as specified and directed. |
33 | M&Lfor disconnecting & dismantling of three phase, 415 volts, 50 Hz, 1460-1500 RPM electric motor of any make and model from pump of any type such as vertical turbine motor, non clogging vertical turbine sewage motor, centrifugal pump motor for water or sewage from installation, transporting the same to workshop, removing all burnt / worn out coils, cleaning of stator slots, insertion ofinsulating paper in the slots of appropriate size and rewinding with supper enamelled copper wire ISI marked with existing size, applying two coats ofinsulating varnish including all winding materials, transporting back the same and re-installation of motor at site in the same position, testing and commissioning complete all as specified and directed for the following capacities: - |
34 | Capacity 75 HP. |
35 | Capacity 50 HP. |
36 | Capacity 40 HP. |
37 | Capacity 30 / 35 HP. |
38 | Capacity 10 / 15 HP. |
39 | M&L for cleaning of internal surfaces of RCC/Steel tank of 1,00,000 gallons capacity including removing deposited sand from the tank, scrubbing and washing the side walls and bottom with bleaching powder solution and making surface free from any fungus, deposites, stains using wire brush, filling/repairing of all cracks/cavaties inside the tank in cement mortar (1:2) and applying one coat of white wash / painting with anti corrosive synthetic enamel paint two coats over a coat of red oxide primer on steel surface. on all internal surfaces including dome and writing date of cleaning, pupose of utility such as rising, washout, overflow with synthetic enamel paint of any tint complete all as directed by Engineer- in-charge Note - Bearings shall be measured and paid separately |
40 | All as per item No. 13.00 above but capacity of tank 50,000 gallons. |
41 | M&L for disconnecting and dismantling of electric motor of any size, de-assembling of all parts, taking out unserviceable bearings and replacing with new bearing of the following sizes, reassembling, reinstallation and testing complete all as specified and directed :- |
42 | Thrust bearing No. 7220/7316 |
43 | Ball bearing 6315 / 6316 |
44 | Ball bearing 6313 / 6314 |
45 | Ball bearing 6311 / 6312 |
46 | Ball bearing 6310 |
47 | Ball bearing 6308 / 6309 |
48 | M&L for turning / cutting on lathe machine of existing bearing cover seat of motors of capacity 30/75 HP of any make/ model and fixing of cast iron sleeve of appropriate size in motor cover to make bearing including necessary transportation from site to workshop and back complete all as specified and directed. |
49 | S&F in replacement, oil seal suitable for 30 to 75 HP capacity electric motor of any make / model complete all as specified and directed. |
50 | M&L for re-metaling of motor rotor shaft suitable for 30 to 75 HP electric motor of any make / model by means of electric welding and turning to required size of bearing and fixed in positioncomplete all as specified and directed. |
51 | S&F in replacement, ratchet assembly suitable for 30 to 75 HP capacity electric motor of any make / model complete all as specified and directed. |
52 | S&F in replacement, cast iron / mild steel connection box with cover for vertical hollow shaft induction motor of capacity 30 to 75 HP alongwith 6 mm thick fiber sheet and brass studs for incoming and outgoing connections complete all as specified and directed. |
53 | M&L for complete overhauling, repair and recommissioning of existing filtration units of the filtration plant of swimming pool of copacity 22000 gallons per hour including supply and filling of 15 to 20% filter media of each stage to make up as well as replacement of unserviceable filter media complete all as specified and directed. Note:-The job also includes the following operations:- (a) Opening the manhole top cover of filtration dome, removal of existing exhausted filtermedia from the vessal, cleaning and scrubbing the internal surface of vessal to make the surface smooth, welding of damaged plates and painting two coates of water proof black bituminous paint on inner side of vessal complete all as specified and directed. (b) Repairing and cleaning under drain water distribution system in the bottom of the vessal cleaning and replacement of defective nozzles with new poly propylene nozzles complete all as specified and directed. |
54 | (c) Supply and filling 50% new filter media and remaining 50% re-filled after cleaning and washing the existing filter media in different layers of under mentioned sizes :- (i) Pebbles size 6mm to 12 mm in mass thickness 100 mm complete all as specified and directed. (ii) Gravels size 3mm to 6 mm in mass thickness 100 mm complete all as specified and directed. (iii) Coarse sand of size 1.2mm to 2.5mm in mass thickness 100 mm complete all as specified and directed. (iv) Sand of size 0.8mm to 1.2mm in mass thickness 990 mm complete all as specified and directed. (d) Closing the man hole with cover for smooth functioning of filter plant complete all as specified and as directed. (e) Painting external surfaces of entire filter, booster pumping set and connected pipes, pipe line insude the swimming pool building with one coat of synthetic enammalled paint complete all as specified and directed . |
55 | M&L for routine repairing/maint of vertical turbine motor pump, submersable pump motor, centrifugal pump motor of water supply installation and non clog cetifugal sewage pump of sewage installation of any capacity for day to day maintenance and making it serviceable in all respects including replacement of necessary gland packing, nut bolt, greasing and minor leakage in pipe etc complete as directed by Engr-in-charge. Note:-Contractor/ represetative will report to Engineer-in-Charge/JE E/M (W/S) daily in forenoon and afternoon to collect routine/urgent work related to water supply till completion of contract. The work shall be attended by the contractor immediately. |
56 | The controctor will ensure availability of manpower equipped with all sort of petty items such as gland packing, nut bolt, grease etc required to accomplish the job. The controctor will also ensure as availability of every type of requisite T& P and Mobile phone to his trade man. All routine/urgent jobs received on job slip to be deposited to JE E/M after completion of the job within 24 hrs. In case of any delay in attending the work more then 24 hrs after handing over of routine/urgent work, the contractor shall be liable to pay the penality @ Rs 750 per job per day. |
57 | M&L for cutting of grass, vegitation,bushes and tree branches running/ touching to ground by manually or machine and depositing where directed and cleaning the area of installation or along the pipe line complete all as specified and directed by Engineer-in-Charge. |
58 | Supply only 3 mm thick rubber inserting sheet all as specified and directed. Make : Jyoti or equivalent |
59 | Supply only 6 mm thick rubber inserting sheet all as specified and directed. Make : Jyotior equivalent |
60 | Supply only galvanized steel nut-bolts, washers of any size and shape or as per existing sample all as specified and directed. |
61 | Supply only ball bearing grease in 1.00 Kg packing all as specified and directed. Make : Castrol / Veedol / HP |
62 | Supply only cotton waste for water supply pump / sewage pump all as specified and directed. |
63 | Supply only gland packing instranded sealed packing ISI marked upto 20 mm size all as specified and directed.Make : Turner or equivalent |
64 | Supply only 3 pole power contactor dry type of capacity 50 Amp, AC 430Volt, 3 phase, 50 Hz, MNX 50 series complete all as specified and directed. Make: L&T Cat PtNo CS97075 or equivalent in Legrand |
65 | Supply only 3 pole power contactor dry type of capacity 40 Amp, AC 430Volt, 3 phase, 50 Hz, MNX 40 series all as specified and directed.Make: L&T Cat PtNo CS94190 or equivalent in Legrand |
66 | Supply only 3 pole power contactor dry type of capacity 32 Amp, AC 430Volt, 3 phase, 50 Hz, MNX 32 series all as specified and directed.Make: L&T Cat PtNo CS94111 or equivalent in Legrand |
67 | Supply only side mounting add on auxilary block 01NO+01NC (Right or left) suitable for of 3 pole L&T MNX series contactor, AC 430Volt 3 phase 50 Hz, all as specified and directed. Make: L&T Cat No CS94205 or equivalent in Legrand |
68 | Taking up Ductile iron cast iron water mains of the following bore sizes including all fittings with spigot and socket ends and lead joints including burning out old joints and recovering lead complete all as directed by Engineer-in-Charge. Note:- Excavation & earth work shall be measured and paid for separately. |
69 | 80 mm dia bore |
70 | 100 mm dia bore |
71 | 150 mm dia bore |
72 | Supply and lay in trenches in replacement of Ductile iron pipes K-9 Spigot and Socketed ends, centrifugally cast suitable for tyton joint in different lengths as per site condition, complete all as directed of following sizes |
73 | 100 mm dia bore |
74 | 150 mm dia bore |
75 | Supply and lay in trenches in replacement of Cast iron pipe 80 mm bore class LA Spigot and Socketed ends, centrifugally cast suitable for tyton joint in different lengths as per site condition, complete all as directed. |
76 | Supply and fix in replacement of rubber gasket joint "tyton joint" complete all as specified and directed of the following bore of pipes:- |
77 | 80 mm dia bore |
78 | 100 mm dia bore |
79 | 150 mm dia bore |
80 | M&L in replacement of run lead joint complete all specified and as directed of following size: |
81 | 80 mm dia bore |
82 | 100 mm dia bore |
83 | 150 mm dia bore |
84 | M&L for Bends (any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing, or double socket etc). Tee pieces, single branch, Y junction, double branch, cross (all socket or socket and spigot) collars,caps,upto 150mm bore of pipe complete all as specified and directed. |
85 | M& L in replacement of tail pieces, flange and plugs or dummy flange plate, connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth of size upto 150 mm bore complete all as specified and directed. |
86 | M&L "D" joints complete withnut bolt & washers etc for thefollowing sizes of water mains |
87 | 80 mm dia bore |
88 | 100 mm dia bore |
89 | 150 mm dia bore |
90 | Cutting in positioncast iron water mains for repair/branch connections or as directed for the following sizes |
91 | 80 mm dia bore |
92 | 100 mm dia bore |
93 | 150 mm dia bore |
94 | M&L for drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 20 mm complete all as specified & directed by Engr-in-Charge. |
95 | M&L for Straight plain brass ferrules (or connecting screws ) screwed both ends and fixed to CI pipes pipes of size 20 mm bore |
96 | Taking out steelTubingfrom trenches/wall/floor/or fromany site complete all as specified and directed for the following sizes |
97 | 15mm bore |
98 | 20 mm bore |
99 | 25 mm bore |
100 | 40 mm bore |
101 | 50 mm bore |
102 | 80mm bore |
103 | Supply and fixing in replacement of GI pipe medium grade with all fittings and fixed complete to wall/ceiling or laid in floor/trenches for the following sizescomplete al as specified and directed. |
104 | 15mm bore |
105 | 20 mm bore |
106 | 25 mm bore |
107 | 40 mm bore |
108 | 50 mm bore |
109 | 80mm bore |
110 | M&L for refixing of old taken out GI pipes after cleaning with all fittings (old or new as per site requirement)and refixed complete to wall/ceiling or laid in floor/trenches for the following sizescomplete al as specified and directed. |
111 | 15mm bore |
112 | 20 mm bore |
113 | 25 mm bore |
114 | 40 mm bore |
115 | 50 mm bore |
116 | 80mm bore |
117 | S&F in repairs gun metal globe or gate wall with iron wheel hand screwed both end for iron pipe all as per latest IS specifications for the following sizes |
118 | 15 mm dia bore |
119 | 20 mm dia bore |
120 | 25 mm dia bore |
121 | 40 mm dia bore |
122 | 50 mm dia bore |
123 | Cutting existing steel tubing for alterations or additions (Each cut measured separately), complete all as specified and directed for the following bore of pipes: - |
124 | 15 mm dia bore |
125 | 20 mm dia bore |
126 | 25 mm dia bore |
127 | 40 mm dia bore |
128 | 50 mm dia bore |
129 | Taking out unserviceable sluice valve including S&F new Sluice valve with flanged ends cast iron body flanged and drilled forsizes as per IS- 14846 hand wheel operated including all joints with rubber or fibre board bolts nuts and washers with gun wedge nut and stainless steel spindle class PN 1.6 with operating wheel complete etc all as directed for the following sizes: |
130 | 80 mm dia bore |
131 | 100 mm dia bore |
132 | 150 mm dia bore |
133 | 200 mm dia bore |
134 | M&L for Construction of valve chamber of size 1.0 mtr x 1.0 mtr x 1.0 mtr internal dimensions complete of brick masonry of 23 cm thick in cement mortar 1:6 on PCC 1:4:8 fountation 75 mm thick using 40 mm graded stone aggregate, coping in concrete 1:3:6 for 10 cm thick at the top of brick wall using 20 mm graded stone aggregate and 15 mm thick plastering in 1:4 cement mortar on exposed surfaces of walls, MS cover of 5.0 mm thickness including 40mm x40mm x6mm angle iron frame fixed with the same size of angle iron hold fast, handle with locking arrangement, two coats of synthetic enamel paint over coat of red oxide primer on steel surfaces and two coat of white wash on the plasterd / concrete surfaces. complete all as specified and directed. |
135 | Taking out unserviceable Non return valve including supply andfixing connecting and testing non return valve horizental flow both end flanged class PN 1.6 as per IS specification and conforming to IS -5312 including nuts, bolts & washers, rubber gasket etc complete all as directed for the following sizes: |
136 | 100 mm dia bore |
137 | 150 mm dia bore |
138 | Supply and fixing Ball valves high pressure of PTMT with epoxy coated Aluminiumrod& highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
139 | 15 mm dia bore |
140 | 20 mm dia bore |
141 | 25 mm dia bore |
142 | Excavation in trenches not exc 1.5mtr wide and not exc 1.5 mtr in depth forlaying GI pipe/ CI Pipe etc and getting out in soft/loose soil complete all as specified and directed. |
143 | Returning, filling in soft/ loose soil obtained from excavation including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed. |
144 | Removing excavated surplus soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
145 | Day to day maintaince / repair/ rectification of water supply complaints against any kind of fault in water pipe line of any size and type or No water supply complaint from building mounted OHT orany other complaint all as directed time to timeby digging / tightening of fittings / colking of lead in CI pipe joints / replacing of GIfittings etc including necessary excavation, returning filling and removing surplus soil (if required) and rectification of complaint to ensure satisfatory serviceability of the water supply with the help of providing the one plumber with one helper on daily basis complete all as directed by Engineer-in-Charge. |
146 | Note:- (i)The items required to replace shall be measured & paid for seperately under relevant item of BOQ at "Supply only" rates. (ii)The Contractor shall be fully responsible to provide necessary transportaion, T&P and safety equipment to his labour to prevent any type of accidents and department will not responsible to provide any type of compensation tothe contractor or his labour in case of any type of accidents / miss-happening or any type of casuality to his labour/ plumber. (iii)In case any maintenance / complaint informed to the contractor telephonically or verbally or on complaint slip is notrectified within 48 hours, the contractor shall be penalised @ Rs 200/- per complaint per day and shall be recovered from the contractor"s dues. (v) The contractor or his representative will report to the concered JE E/M daily in the morning at 9.30 AM to collect the complaints and shall deposite the same to this office after rectification duly signed by the concerned user / occupant of affected acccn or area. |
147 | Supply only following materials for replacement in day to day maintenance of water supply system by the contractor :- Note:- The materials supplied by the contractor, to be taken on charge by the department in Stores In Hand Ledger through RV duly verified by the Audit Authorities and then to be issued to the contractor through proper Indent to incorporate in the day to day maintenance works. |
148 | GI Tee reducer 40 x 40 x 25 mm |
149 | GI Tee reducer 50 x 50 x 25 mm |
150 | GI Tee equal 25x25x20 mm |
151 | GI Tee reducer 20 x 20 x 15 mm |
152 | GI Tee equal 25x25x25 mm |
153 | GI Tee equal 20x20x20 mm |
154 | GI Union50 mm |
155 | GI Union 40 mm |
156 | GI Union 25 mm |
157 | GI Union 20 mm |
158 | GI Union 15 mm |
159 | GI barrel nipple 15 mm 6 inches long, screwed at both ends |
160 | GI barrel nipple 15 mm 4 inches long screwed at both ends |
161 | GI barrel nipple 20 mm6 inches long screwed at both ends |
162 | GI barrel nipple 20 mm4 inches longscrewed at both ends |
163 | GI barrel nipple 25 mm6 inches long screwed at both ends |
164 | GI screwed plug 15 mm |
165 | GI screwed plug 20 mm |
166 | GI screwed plug 25 mm |
167 | GI elbow 15 mm |
168 | GI elbow 20 mm |
169 | GI elbow 25 mm |
170 | GI socket 15 mm |
171 | GI socket 20 mm |
172 | GI socket 25 mm |
173 | Cutting of existing CI pipe in position for inserting of tee, bend collar other type of CIfitting for addition /alternation of existing system for following sizes :- |
174 | 80 mm dia bore |
175 | 100 mm dia bore |
176 | 150 mm dia bore |
177 | 200 mm dia bore |
178 | S&F bib taps 15 mm bore, Bib taps, cast iron with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
179 | S&F bib taps 20 mm bore, Bib taps, cast iron with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
180 | Taking out CI pipe any type including fittings with spigot and socketed end centrifugally cast laid in trenches of following sizes :- |
181 | 80 mm dia bore |
182 | 100 mm dia bore |
183 | 150 mm dia bore |
184 | 200 mm dia bore |
185 | Re-fixing CI pipe including fittings with spigot and socketed end centrifugally cast laid in trenches after cleaning internally and externally, drawing out foreign material/rust complete up to satisfaction of Engr in Charge of following sizes :- |
186 | 80 mm dia bore |
187 | 100 mm dia bore |
188 | 150 mm dia bore |
189 | 200 mm dia bore |
190 | Supply and lay in trenches in replacement of Ductile iron pipes K-9 Spigot and Socketed ends, centrifugally cast suitable for tyton joint in different lengths as per site condition, complete all as directed of following sizes |
191 | 80 mm dia bore |
192 | 200 mm dia bore |
193 | Screwing existing steel tubing for alterations or additions or to form connection, complete all as specified and directed for the following bore of pipes: - |
194 | 15 mm dia bore |
195 | 20 mm dia bore |
196 | 25 mm dia bore |
197 | 40/50 mm dia bore |
198 | M&L for run lead joint for spigot and socketed end CI pipe & fittingscomplete all as specified and directed by Engr in charge for following :- |
199 | 80 mm dia bore |
200 | 100 mm dia bore |
201 | 150 mm dia bore |
202 | 200 mm dia bore |
203 | M&L for run lead joint for spigot and socketed end CI pipe & fittingscomplete all as specified and directed by Engr in charge for following :- |
204 | 80 mm dia bore |
205 | 100 mm dia bore |
206 | 150 mm dia bore |
207 | 200 mm dia bore |
208 | Taking out, sluice valve top cover, spindle and broken / unsv check nut (gutka)carry to workshop & re-fixing ofsluice valve after servicing /maintenance /grinding / cleaning / threading / greasingwork to sluice valve parts, including replacement of gland packing, rubber sheet, nut, bolt, Spindle ,check nut and washer of existing size complete all as specified and directed, of following size:- |
209 | 80 mm dia bore |
210 | 100 mm dia bore |
211 | 150 mm dia bore |
212 | 200 mm dia bore |
213 | M&L for PCC 1:2:4 type B1 using 20 mm stone aggregate for providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string course lacing courses, parapets and railing upto 60cm in height copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded orchamfered angles and throating complete all as specified and directed. |
214 | M & L for 15 mm thick rendering on fair face of brick work with cement mortar 1 : 4 finished even and smooth (without using extracement) complete all as specified and directed. |
215 | S&F mild steel framed work such asfor valve pit chamber covermade of MS equal angle and MS sheet 3 mm thick including welding, cutting, hinges, locking arrangements including paintingand similar conforming to Fe-290Gde E-165 complete all as specified and directed. |
216 | S & F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), large hasps and staples and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
217 | Taking up or down (from wall/trenches/floor) existing GI steel tubingand connections of following sizes:- |
218 | 100 mm dia bore |
219 | M&L for refixing of old taken out GI pipes after cleaning with all fittings (old or new as per site requirement)and refixed complete to wall/ceiling or laid in floor/trenches for the following sizescomplete al as specified and directed. |
220 | 100mm bore |
221 | Supply , fixing & laying only GI tubing medium grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittingsfor laid in trenches/wall/ceiling/ floor/all as specified and directed of following size :- |
222 | 100 mm dia bore |
223 | M&L for drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 15 mm complete all as specified & directed by Engr-in-Charge. |
224 | Labour only for minor repairing / rectification and attending the complaints of pipe line leakage/float valve repairing of size 15 mm to 32 mm by highly skilled trades man and making functional including all necessary GI fittings (socket, union, elbow etc) complete all as specified and directed at site. |
225 | Labour only for minor repairing / rectification and attending the complaints of pipe line leakage/float valve repairing of size 40 mm to 50 mm by highly skilled trades man and making functional including all necessary GI fittings (socket, union, elbow etc) complete all as specified and directed at site. |
226 | Labour only for minor repairing / rectification and attending the complaints of pipe line leakage/float valve repairing of size 80 mm to 100 mm by highly skilled trades man and making functional including all necessary GI fittings (socket, union, elbow etc) complete all as specified and directed at site. |
227 | M&L for Construction of valve chamber of size 0.90 mtr x 0.90 mtr x 0.90 mtr internal dimensions complete of brick masonry of 23 cm thick in cement mortar 1:6 on PCC 1:4:8 fountation 75 mm thick using 40 mm graded stone aggregate, coping in concrete 1:3:6 for 10 cm thick at the top of brick wall using 20 mm graded stone aggregate and 10 mm thick plastering in 1:4 cement mortar on exposed MS cover of 5.0 mm thickness including 40mm x40mm x6mm angle iron frame fixed with the same size of angle iron hold fast, handle with locking arrangement, two coats of synthetic enamel paint over coat of red oxide primer on steel surfaces and two coat of white wash on the plasterd / concrete surfaces. complete all as specified and directed. |
228 | All as per item 80 above but size of valve chamber 1.05 mtr x 1.05 mtr x 1.05 mtr internal dimensions complete all as specified and directed. |
229 | Labour only for cleaning of internal surfaces ofRCC Over Head Reservoir of 10,000 gallons capacity at 30 feet height staging including by removing sludge , mud , calcium or any other foreign materials from thebottom, side wall and dome of the OHT after scrapping, brushing internal surfaces drawn outside complete waste water from tank by manually or portable pump set arrangement cleaning of bottom, all internal side walls, channel by using brooms, wiper or nylon brush up to satisfaction of Engr in charge, and applying two coat of super quality lime to internalsurface of OHT incl writing date of cleaning, capacity with super enamelled white paint over surface of black enamelled paintcomplete all as specified and directed. Note :- (i) No T&P will be provided by the Deptt. (ii) Contractor shall be fully responsible forsafety of deployed person. |
230 | All as per item No. 82.00 above but capacity of tank 50,000 gallons at 21 mtr height staging. |
231 | Labour only for cleaning and removing all scale and dirt by using bleaching powder from tanks and from mouths of circulating pipes for upto 500 ltr PVC/RCC/Steel tank etc. Note:- any damage to PVC tank during cleaning, contactor shall be liable to get itrepair/replace with existingmake and capacity without any cost. |
232 | Repair/replacement of the following spare parts for 96 NGQ 51 DECRIN dosing pumpscomplete all as specified and directed. |
233 | Injection check valve 3/8” MCINJ 38 (5 in 1 pkt). |
234 | Weighted suction line strainer 3/8” st138. |
235 | 3/8” weight suction/discharge tubing malt 002. |
236 | Check valve duckbill only (Pack of 5) |
237 | Connecting nut 3/8” MANUT00 |
238 | Connecting nut 3/8” with adaptor (pack of 5) mcadptr |
239 | Ferrule 1/4 “ (pack of 24) MACK200 |
240 | Taking out carefully existing defective deep well Vertical Turbine or Submersible pump set assembly of capacity 10,000 – 30,000 gallon per hour from existing bore well including all column pipes and connected parts for repair and servicing complete all as specified and directed. |
241 | M & L for assembling, installation, lowering of deep well Vertical Turbine or Submersible pump set assembly of capacity 30,000 gallon per hour in existing bore well after carrying out necessary repair / replacement work including connecting column pipes, line shaft with guide spiders and rubber bushes etc. duly installation, commissioning and connected with hollow shaft electric motor or submersible of any capacity including making all necessary adjustments and electric connections as required for satisfactory performance of the pump complete all as specified and directed. |
242 | Notes:- (i) All type of T & P andtransport is to be arranged by the contractor for lifting andlowering of the Pump sets. (ii)All electrical connection of the motorshall be removed and than connected very carefully. (iii) Contractor shall carryoutthe repair forthwith after getting the massage from AGE E/M /JE E/M either verbal or telephonically. asum of Rs 250.00 per day per pump shall be deducted from the contractordue payment on account of willfull delay on contractor part in the opinion of the Engr-in- charge. (iv) Spare parts will be measured and paid separately. |
243 | M & L for cleaning of outer surface of serviceable column pipe and line shaft with steel brush and oiling of threads complete all as specified and directed. |
244 | M & L for cutting of line shaft of any size, in any length as per site requirement and rethreading the same complete all as specified and directed. |
245 | M & L for cutting of 200/ 150/ 125/ 100 mm bore column pipes in required length and rethreading upto 80 mm from end complete all as specified and directed. |
246 | S & F as in replacement following spares parts of deep well vertical turbine pump set having discharge 30,000 gallon per hour at 50 meter headcompleted allas specified and directed: - |
247 | Centrifugally casted cast iron bowl complete with gun metal bush of suitable size to match with existing pump shaft. |
248 | Cast iron impeller close type |
249 | Cast iron discharge case with gun metal bush. |
250 | Pump shaft made of antimagnetic stainless steel of size 31.5 mm dia suitable for six stage pump as per site requirement. |
251 | Mild Steel line shaft 30 mm dia 10 feet long with one coupling and one stainless steel sleeves |
252 | Guide spider heavy duty with rubber bush and check nut suitable for 30 mm dia line shaft and 150 mm bore column pipe. |
253 | Mild steel collar impeller lock. |
254 | Rubber bush for CI Bowl |
255 | Gun metal bush for suction case. |
256 | Gun metal bush for discharge case. |
257 | Gun metal Bush for CI Bowl. |
258 | Gun metal neck ring |
259 | Dismantling and assembling of Bowl assembly complete including replacement of unserviceable nut-bolts, washers and struts etc. |
260 | MS Socket 150 mm dia Heavy duty |
261 | S/S Sleaver 31.5 mm dia Heavy duty |
262 | GM Impeller as per sample |
263 | Rethreading of SS shell both ends |
264 | Rethreading of both ends of Column pipe 150 mm dia |
265 | Supply only Thrust ball bearing No 7220 Make - SKF/NBC, complete all as specified and directed. |
266 | Supply only Thrust ball bearing No 6310 Make - SKF/NBC, complete all as specified and directed. |
267 | M&L CI flange of size 150 mm including welding to existing pipe, complete all as specified and directed. |
268 | Taking out unserviceable non return valve including S & F 150 mm size new heavy duty cast iron non return valve, both ends flanged duly drilled, PN-1.00 confirming to IS – 5312 (Make – Kirloskar, Kalpana, BIR) with and including necessary jointing material as required complete all as specified and directed. |
269 | S & F as in replacement following spares parts of deep well submersible pump set having discharge upto 25,000 gallon per hour multistage water lubricated type of capacity 30 To 50 HP completed allas specified and directed. |
270 | Centrifugally casted cast iron bowl complete with gun metal bush of suitable size to match with existing pump shaft. |
271 | Gunmetal impeller close type with keys. |
272 | Cast iron discharge case with gun metal bush (Top Bowl). |
273 | Cast iron sanction piece (IP piece). |
274 | Pump shaft made of antimagnetic stainless steel of existing size as per site requirement. |
275 | Rubber bush for intermediate bowl |
276 | Stainless steel sleeve required in between pump shaft and rubber bush. |
277 | Sand guard. |
278 | Gun metal ring for cast iron bowl. |
279 | Oil seal for pump. |
280 | Stainless steel struts off size. |
281 | Cast iron non return valve suitable for pump. |
282 | Stainless steel coupling for motor pump. |
283 | FOR MOTER |
284 | Gunmetal bush for motor. |
285 | Carbon bearing for thrust plate for motor. |
286 | Stainless steel thrust bearing complete set suitable for motor. |
287 | Stainless steel sleeve required in between rotor and bowel (bush) for motor. |
288 | Sleeve suitable for oil seal of rotor. |
289 | Sand guard for motor. |
290 | Stainless steel strut for motor. |
291 | Cast iron housing for motor end bush. |
292 | Thrust bearing housing. |
293 | Cast iron connection piece for motor with sand guard. |
294 | Hot dip galvanized steel ERW column pipe 10 feet long, 5.40 mm wall thick and 125 mm bore both ends flanged and drilled with and including 10 mm thick mild steel drilled flanges duly welded at both ends. |
295 | Supply only transformer insulating oil EHV grade having dielectric strength not less than 40 KV (RMS) at 4mm gap high viscosity in 5 Ltr plastic containers, complete all as specified and directed. |
296 | M & L for as in replacement 1100 volts grade, ISI Marked, AC PVC insulated flexible, flat, three core, stranded copper conductor cable of nominal size 10 Sqmm complete all as specified and directed. |
297 | S & F in replacement 10 mm thick mild steel flanged duly drilled to befixed to 100/ 125/150 mmbore existing mild steel column pipe with and incl cutting threading and welding of three Nos 150 mm long 40x6 mm flat iron pieces one side with flanged and other side with column pipe complete all as specified and as directed. |
298 | Supply and fix only 3 mm thick rubber inserting sheet complete all as specified and as directed. |
299 | Supply and fix only 6 mm thick rubber inserting sheet complete all as specified and as directed. |
300 | Supply and fix only galvanized steel nut-bolts, washers of any size complete all as specified and as directed. |
301 | Supply and fix only ball bearing grease in 1 Kg packingcomplete all as specified and as directed. make – Castrol / Veedol / HP |
302 | Supply and fix only cotton waste for water supply pump / sewage pump complete all as specified and as directed. |
303 | Supply and fix only gland packing instranded sealed packing ISI marked upto 20 mm size complete all as specified and as directed. Make Turner or equivalent |
304 | S & F of 50 mm bore flexible PVC pipe heavy duty wire breaded ISI marked complete all as specified and directed. |
305 | Surface dressing not exc. 15 cm deep as in soft / loose soil including removal of grass, herbs, shrubs roots and spreading / leveling of excavated earth alongwith making clean and tidy the entire area of water supply / sewage installation complete all as specified and directed. |
306 | Dismantling carefully vertical turbine, centrifugal, submersible electric motor three phase, 415 volts, 50 Hz, 1460 RPM of any make and model from site of installation, transporting the same to workshop, removing all burnt / worn out coils, cleaning of stator slots, insertion ofinsulating paper in the slots of appropriate size and rewinding with supper enameled copper wire ISI marked with existing size, applying two coats ofinsulating varnish including all winding materials, transporting back the same and reinstallation of the 50 HP motor complete all as specified and directed. |
307 | Turning / cutting of existing cover bearing seat of motors of capacity 10 to 30 HP of any make/ model and fixing of cast iron sleeve of appropriate size in motor cover to make bearing complete all as specified and directed. |
308 | S & F as in replacement of oil seal suitable for 10 to 30 HP capacity electric motor of any make / model complete all as specified and directed. |
309 | M & L for re-metaling of motor rotor shaft by means of electric welding and turning to required size of bearing fixed in position 10 to 30 HP motor of any make / model complete all as specified and directed. |
310 | S & F as in replacement ratchet assembly suitable for 10 to 30 HP capacity electric motor complete all as specified and directed. |
311 | S & F as in replacement cast iron / mild steel connection box with cover for vertical hollow shaft induction motor capacity 10 to 30 HP alongwith 6 mm thick fiber sheet and brass stud for incoming and outgoing connections complete all as specified and directed. |
312 | M & L for rewinding of submersible motor 3 phase 25 HP capwith PVC insulated copper conductor cable of appropriate size alongwith necessary packing and winding material with and including taking out burnt winding complete all as specified and directed. |
313 | Overhauling, servicing and maintenance of 415 Volts, 50 Hz, upto 50 HP capacity star delta starter of any make or model including replacement of minor defective parts as directed and necessary testing as required after servicing complete all as specified and directed. |
314 | Supply only the following items/spare parts suitable for star delta starter of capacity 45/50 HP capacity dismantled/fixed under Schedule ‘A’ item No 113 here in above complete all as specified and directed: - |
315 | Fixed contact ‘A’ (Set of 24). |
316 | Fixed contact ‘B’ (Set of 24) |
317 | Moving contact ‘B’ (Set of 12) |
318 | Oil dash pot assembly (Set of 03) |
319 | Cam spring |
320 | Lever spring |
321 | Over load coil |
322 | No volt coil 415 Volts AC |
323 | Bore plate Bakelite |
324 | Steam carrier assembly (Set of 03) |
325 | Auxiliary switch |
326 | RZ timer with coil & time delay relay of range 3 to 12 seconds |
327 | S & F as in replacement MCCB 160 Ampere,415 volts, 4 poles, breaking capacity 36 KA with adjustable thermal & magnetic release complete all as specified and directed. |
328 | Overhauling, servicing and maintenance of booster pumping set multistage, 1400 RPM, 0.5 HP capacity for chloronome plant including replacement ofall defective spare part complete all as specified and directed. |
329 | S&F contactor of 32 Amp, 4 pole, 415 Volts for DOL starter complete all as specified and directed. |
330 | M&L for Collection, transporting and testing the sample of water in a borosil bottle sealed in presence of Engr-in-charge from water supply installation site at RTS & Depot Saharanpur to Govt Lab at department of civil Engineering IIT Roorkee every six Months and submitting test report of sample. The format for chemical analysis are as under:- (i) Total Dissolved solids (mg/I) (ii)Total Hardness as CaCO3 (mg/I) (iii)Calcium as Ca (mg/I) (iv)Magnesium as MG (mg/I) (v) Methal Orange Alk (mg/I) (vi)Iron as Fe (mg/I) (vii)Chloride as CL (mg/I) (viii) Sulphate as SO4 Fluoride as F (mg/I) (ix)ph (mg/I) (x) No3 (mg/I) (xi)Conductivity (micro s/CM) (xii) Turbidity (NTU) (xiii)Residual free Chlorine (mg/I) (xiv) Sodium as Na (mg/I) (xv)Total Solides (mg/I) (xvi)Fluoride as F (mg/I) |
331 | M&L painting cast iron/MS water mains external surfaces with one coat of synthetic paint over existing painted surfaces of rising main supply for the following completed allas specified and directed. |
332 | 150 mm bore |
333 | 100 mm bore |
334 | 80 mm bore |
335 | Taking out old unserviceable Sluice valve &Supply and fix cast iron flanged sluice valve of class 1.6 PNinstalled complete with ISI marked (IS-14846) with gun metal spindle and hand wheelfor the following completed allas specified and directed. |
336 | 80 mm bore |
337 | 100 mm bore |
338 | 150 mm bore |
339 | 200 mm bore |
340 | M&L earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 32mm x6mm thick by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 ofSSR-2009 Part I |
341 | and includingnecessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) (chamber size not less than 300x300x300mm interier diamentions), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15cm c/c both way for cover and MS frame etc., complete all as specified. NOTE: The unit rate includes earth strip and protection pipe upto (maximum 7.5 metre from earth plate) earth point/test point. and chamber shall be made 0.5 mtr away from the earthing pit. |
342 | Supply only of Bamboo ladder 22 steps complete all as specified and directed. NOTE: Existing u/s ledder shall be sold to contractor under Schedule of Credit. |
343 | Material and labour for ductile Iron fittings for flanged pipe such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc) Tee pieces single branch "Y" junction, double branch, cross (All sockets or socket and spigot) collars, caps and plugs upto 150mm bore complete all as specified and directed. |
344 | M&L for painting of installations boards/insign as in navy blue background colour and letters in white colour, including making the surfaces clean for painting all as specified and directed |
345 | S&F 1.60mm Mild steel, plain, black sheet in Steel over head tank wall cladding , bases of water tankand similar work, cut to size and sheeting is welded to frame/Existing sheetof Existing tank without dismentling of old sheet complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail