Repairing Of Existing Store Room Cum Guard Room With Sanitary Water Supply Arrangements Including Plinth Protection Of Ghatua Store Due To Combats Cyclonic Storm Amphan Within Contai-I Block Under Contai Sub-Division Of Tamluk Division, P.H.E.
Tender Value
5.79 Lakhs
Estimated cost
Bid Submission
29 Jul 2022
0 days left
EMD
11585
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
contai → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairing Of Existing Store Room Cum Guard Room With Sanitary Water Supply Arrangements Including Plinth Protection Of Ghatua Store Due To Combats Cyclonic Storm Amphan Within Contai-I Block Under Contai Sub-Division Of Tamluk Division, P.H.E.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling all type of masonry excepting cement concrete plain or reinforced, stacking servicible materials at site and removing rubbish as directed within a lead of 75 m. |
| 2 | a) In ground floor including roof. |
| 3 | Dismantling R.C. Floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75m. Including stacking of steel bars. |
| 4 | a) In ground floor including roof. |
| 5 | Dismantling terraced roof in ground floor roof (including floor finish, if any.) taking out carefully tiles with beams, joists, tees or burgahs covering floor below, sorting and stacking sevicable materials at site and removing rubbish as directed within a lead of 75 m. |
| 6 | a) In Ground Floor including roof. |
| 7 | Taking out shutter of door and window, dismantling by parts (for repair orreplacement of damaged parts) , reassembling and refitting and rehanging samewith old fittings but with new screws as necessary. (Where different parts ofsame shutter are renewed under different item, payment under item 73 will bemade once only). |
| 8 | Cleaning the concrete surface by removing dirt and debris, marking defectivelocations and removing loose concrete by careful stripping untill hard surfaceis exposed, cutting the concrete to regular shape, wire brushing the exposedsurface and removing debris from site complete as per direction of theEngineer - in - Charge. |
| 9 | Cleaning the exposed reinforcement preferably upto full diameter by wire brush, applying two coats of polymer based rust removing compound left for 24 hours, removing the coating and then applying two (2) coats of polymer modified anti corrosive protective coating formulated to inhibit the corrosion of reinforcement as per manufacturer\"s specification] [Mode of measurement:The affected surface area of reinforcement shall be considered for payment] |
| 10 | Applying epoxy based reactive joining agent for joining the old concrete withfresh concrete to be applied within manufacturer\"s specified time as permanufacturers specification. (0.4 Kg / m² of concrete surface). |
| 11 | Note: Applicable only when the full diameter of reinforcement steel isexposed. |
| 12 | Renewing Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out jointsincluding throating, nosing and drip course, scaffolding / stagingwhere necessary (Ground floor). [Excluding cost of chipping over concrete surface]Building works, ( Item No.-1(ii) Page No.- 189 ) & P-49 of 96 , 3rd Corrigenda& Page A-1, Genaral condition, Sl No- 4(Multification Factor of rate 105/100) |
| 13 | (ii) With 1:4 cement mortar |
| 14 | (b) 15 mm thick plaster |
| 15 | (a) 20 mm. thick plaster. |
| 16 | (c) 10 mm thick plaster |
| 17 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (Including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. |
| 18 | (a) Depth of excavation not exceeding 1500 mm. |
| 19 | Earth work in filling in foundation trenches or plinth with good earth, In layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on basis of measurement of finished quantity of work). |
| 20 | (a)With earth obtained from exacavation of foundation. |
| 21 | (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm. as directed and consolidating the same by thorough saturation with water ramming complete including the cost of supply of sand.(Payment to be made on measurement of finished quantity) |
| 22 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 23 | Cement concrete with graded Jhama Khoa(32 mm. size excluding shuttering. |
| 24 | In ground floor |
| 25 | (a) 1:3:6 proportion. |
| 26 | Brick work with 1st class bricks in cement mortar (1:6) |
| 27 | (a) In foundation and plinth |
| 28 | Brick work with 1st class bricks in cement mortar (1:6) |
| 29 | (a) In Super strucute |
| 30 | 125 mm thick brick work with first class bricksin cement morter ( 1:4)In ground floor. |
| 31 | Extra for using approved H.B. Netting in every third layer in any floor, |
| 32 | Ordinary Cement Concrete(mix 1:1.5:3) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS Codes. (Analysis Rate) |
| 33 | (i) Pakur Variety.(analysis rate) |
| 34 | Ground floor ( upto 4 mtr. Height) |
| 35 | Hire and labour charges for shuttering with cantering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) |
| 36 | (a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 37 | (f) 25 mm to 30 mm shuttering without staging in foundation |
| 38 | Artificial stone in floor/roof finishing, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in plnels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works, using cement @ 1.75 kg. / sq.m all complete including all materials and labour in ground floor, 3mm. thick topping using grey cement. |
| 39 | iii) 25mm. Thick. |
| 40 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. |
| 41 | (a) For works in foundation, basement and upto roof of ground floor/upto 4 m. |
| 42 | (i) Tor steel/ Mild steel .( JSW / JSPA / SHYAM/ SRMB/ BMASL / ELECROSTEEL / SSL) |
| 43 | A) For Steel Door (1.05 m. X 2.10 m.) M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S., W.I. Flats and bars for windows, railing etc. fitted and fixed eith necessary screws and lugs in ground floor. |
| 44 | a) grill weighing above 16kg/sqm |
| 45 | B) for hanging and locking arrangements for gate including supply of materials and labour complete. |
| 46 | c) Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. |
| 47 | B) For Steel Window (0.90 m, x 1.35 m.) & Steel Ventilator (0.50 m. x 0.45 m.) |
| 48 | Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excludingglazing. |
| 49 | a) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only] |
| 50 | (i) Two point nose steel handle including fitting and fixing. |
| 51 | (ii) steel peg stay 300 mm long including fitting and fixing. |
| 52 | iii) Centre hung ventilators as per I.S. sizes 580 mm. |
| 53 | viii) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. Flats and bars. |
| 54 | iv) Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) |
| 55 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete.In ground floor. (Payment will be made on the area of the gate covered by two guard rails and two extreme channels) |
| 56 | (A) Extra over the corresponding item of collapsible gate for top hung |
| 57 | Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finished weight of 2.73 kg/mtr.) of size 100mm X 45mm made off with 5mm thick extruded foam PVC sheet, mitre cut at junction of horizontal and vertical member and joined them by heat welding. Entire door frame profiles to be reinforced with steel primer coated 19 SWG 40mm X 20mm M.S. tube. An additional 5mm thick PVC sheet with desired colour/shade to be provided at the exposed surface and three nos 5mm thick PVC sheet to be provided as gap insert. The door frame to be fixed with wall by using 8mm dia. and 100mm long strainless steel screws and PVC fasteners. A minimum of 4 nos. screws to be provided for each vertical member & 2 nos. for horizontal member all complete as per direction of Engineer-in-Charge. (b) Pre-laminated Colour. |
| 58 | Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular \"L\" shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliancesi/c carriage of all materials taxes and all other incidental charges complete.(Item no - 27), Page No--135) |
| 59 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out jointsincluding throating, nosing and drip course, scaffolding / stagingwhere necessary (Ground floor). [Excluding cost of chipping over concrete surface]( Item No.-1(ii) Page No.- 189 ) |
| 60 | (ii) With 1:4 cement mortar |
| 61 | (b) 15 mm thick plaster |
| 62 | (a) 20 mm. thick plaster. |
| 63 | Neat cement punning about 1.5 mm. thick in wall dado, window, sills, floor, drain etc. |
| 64 | b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 65 | Painting with best quality synthetic enamel paint of approved make & brand including smoothening surface by sand papering etc. including using of approved putty. etc. on the surface if necessary |
| 66 | (b) Onsteel surface or other metal surface with super gloss (high gloss) two coats (with any shade except white) |
| 67 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paintincluding scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. (In Ground Floor) |
| 68 | Two Coats |
| 69 | i) Water based interior grade Acrylic Primer |
| 70 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface. |
| 71 | Two Coats |
| 72 | Applying Exterior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish Acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer’s specification and as per direction of the EIC (Ground Floor) |
| 73 | Two Coats |
| 74 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacture’s specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In ground floor(two coat) |
| 75 | i)Premium 100% Acrylic Emulsion |
| 76 | Number plaque of building (plaque size up to 225 mm x 225 mm) made of sand cement plaster (1 : 2) on face of wall or plinth with 50 mm size letters P.W.D and the number of the structure formed thereon (in sunk type) including painting the letters and the number complete as per direction.(Cement - 1 kg/No.) |
| 77 | Roof Treatmentwith cement concrete (1:2:4) with stone chips, laid in plnels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works, using cement @ 1.75 kg. / sq.m all complete including all materials and labour in ground floor, 3mm. thick topping using grey cement. |
| 78 | iii) 35mm. Thick. |
| 79 | Supplying ,fitting& fixing UPVC pipesA- Type and fittings conforming to IS:13592- 1992with all necessary clamps nails,including making holes in walls ,floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (SpunYarn, Valamoid/Bitumen/M-Seal etc) complete. |
| 80 | UPVC PIPES |
| 81 | (i) 75 mm dia. |
| 82 | ii) Bend 87.5 degree, 75 mm. dia. |
| 83 | iii) Shoe, 75 mm. dia. |
| 84 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 |
| 85 | Single Socketed 3 Meter Length |
| 86 | b) 110 mm |
| 87 | Bend 87.5° ) |
| 88 | b) 110 mm |
| 89 | Vent Cowl |
| 90 | b) 110 mm |
| 91 | Supplying, fitting and fixing brass ferrule including connection with P.V.C. pipe of approved make upto 450 mm long with plumbing joint,brass over C.P. coupling at both ends, with cap and lining complete in all respect, including cutting trenches in all sorts of soil and filling up trenches as per direction of the Engineer-in-charge. |
| 92 | (b) 10 mm dia. |
| 93 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. |
| 94 | ii) 110 mm (Above ground) |
| 95 | Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed. |
| 96 | (a) Upto 20 users:- |
| 97 | (i) Within a lead of 150 metre |
| 98 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. |
| 99 | (ii) 550 mm X 400 mm size |
| 100 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. |
| 101 | (a) With \"P\" trap (with vent) |
| 102 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. |
| 103 | (b) Anglo Indian |
| 104 | (ii) Plastic (hallow type) white |
| 105 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. |
| 106 | i) Polythene Flush Pipe |
| 107 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 108 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. |
| 109 | (i) 635 mm X 395 mm X 420 mm |
| 110 | Supplying, fitting and fixing soap holder. |
| 111 | (a) PTMT (Prayag or equivalent) |
| 112 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm |
| 113 | Supplying, fitting and fixing towel rail with two brackets. |
| 114 | (a) C.P. over brass |
| 115 | (iii) 25 mm dia. and 750 mm long |
| 116 | Supplying Godrej Navtal & Key of 7 levers. |
| 117 | Labour for punching hole in plastic water storage tank upto 50 mm dia. |
| 118 | (4 nos. hole for each tank). |
| 119 | Cleaning and disinfecting up to 2000ltr. Water tank including masonry reservoir. (500ltr./1000ltr.) as per direction of E.I.C. |
| 120 | Labour for hoisting plastic water storage tank. |
| 121 | (i) Upto 1500 litre capacity. |
| 122 | (a) Upto 1st story from G.L. |
| 123 | Supplying, fitting & fixing gunmetal Wheel Valve of approved brand and make tested to 21 kg. Per sq. Cm. (for water lines only). |
| 124 | a)25 mm. dia. |
| 125 | Supplying, fitting & fixing polythene Bib Cock / Stop Cock with plastic inlet (EMCO / ATLAS or equivalent) |
| 126 | 15 mm |
| 127 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) |
| 128 | a)For Exposed work PVC pipes |
| 129 | i)20 mm. dia. |
| 130 | ii)25 mm. dia. |
| 131 | iii)32 mm dia. |
| 132 | Supply of Ordinary Labour for Shifting of Govt. Materials Such as Bend,Tee,Reducer,Sluice Valve etc. From One Store room to Other store room including all charges and complete as per Direction of E.I.C. |
| 133 | Add GST @12% (CGST@6%+SGST@6%) |
| 134 | Add Cess @1% |
AI Tender Summary
Tender Timeline
Jul 08, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 01, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender