Electrification Of Internal Lighting System At Gulabi Bagh B.P.S.--1 Dismantling of old wiring, switches, ceiling fans, tube light and fittings MCB and MCB’s box and others old damaged accessories of electric wiring accessories etc. as per site requirement. 2 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface I recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. DSR 2018, item code: - 1.1.1 & DJB S.O.R. 3 Supply/Fixing of metal box of 150mm x 75mm x 60mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing & fixing 3 pin 5/6 Amp socket outlet and 5/6 Amp piano type switch connection, painting etc. as required (For light plug to be used in non-residential building) DSR-2018 Code: -1.29 & DJB S.O.R. 4 Wiring for circuit/sub main wiring along with earth wire with following sizes of PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required:a. 2 x 1.5 sq mm 1 x 1.5 sq mm with earth wire. DSR 2018, Item code- 1.14.1& DJB S.O.R. 5 Wiring for circuit/sub main wiring along with earth wire with following sizes of PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required:b. 2 x 2.5 sq mm 1 x 2.5 sq mm with earth wire DSR 2018, Item code- 1.14.2& DJB S.O.R. 6 S/o LED light of 45-watt new generation energy saving and environmentally friendly long life LED street light made up of pressure die cast aluminum housing with highly efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07. DJB S.O.R., Make: - Bajaj, Havells and any approved make of DJB 7 S/o 20 W LED 6000 K decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmentally friendly, energy efficient ready to use pack. Lamp Type Order. DJB S.O.R. Make: - Bajaj, Havells, Philips 8 S/o of ceiling fan having size 1200 mm (48’) in white colour.DJB S.O.R. Make: - Anchor, orient, Standard, and any approved make by DJB 9 Wall mounted Air circulator 600mm. DJB S.O.R. Make: Havells/Crompton/Almonard and any approved make of DJB 10 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable etc. as required. DSR 2018, item code: -1.44, DJB S.O.R. 11 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. DSR 2018, item code: 1.25, DJB S.O.R. 12 Supply/Fixing of following way single pole and natural, sheet steel MCB distribution board, 20 volts, on surface/recessed complete with tinned copper bus bar, neutral bus bar, earth bar, din bar detachable gland plate interconnection phosphatized and powder painted including earth etc as required (But without MCB/RCCB/ISOLATOR) 8-way single door. DSR 2018, item code: 2.3.2, DJB S.O.R. 13 Supply, 1.1 kV grade, XLPE insulated, stranded Aluminum conductor, galvanized steel flat strip / round wire armored, extruded PVC type ST2 sheathed, conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes 3 Core x 16 Sq.mm DJB S.O.R. Make: - Havells, Plolycab and any approved make of D.J.B. 14 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle) DSR 2018, Item code: - 7.7.1, DJB S.O.R. 15 Rubber mats for electrical purpose as per IS: 5424 – 1969, black, red, blue plain chequered of following thickness of: - (1mx 2 m) 10 mm thickness. D.J.B. S.O.R. Make Jyoti, National and any approved make of DJB 16 Supply and fixing of M.S.bracket bend & clamp for install the LED lights as required at site. 17 Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required details of cost for one Set DSR-2018 Code-5.4, D.J.B. S.O.R. 18 Providing• and fixing 25 mm X 5 mm• G.l. strip in 40 mm dia G.l. pipe from earth electrode including connection with G.l. nut, bolt, spring, washer excavation and refilling etc. as required. DSR-2018 Code-5.11, D.J.B. S.O.R. 19 Cotton waste, cleaning cloth etc. DSR 2018, Code No. 2938 20 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.a. (6 to 32 Amp) Single Pole DSR 2018, Item code- 2.10.1 & DJB S.O.R. 21 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.b. (32 Amp) Triple Pole DSR 2018, Item code- 2.10.4 & DJB S.O.R. 22 Replacement of motor connection plate with stud & nut bolt etc. as per sample. 23 Testing & Commissioning as follow:- All functional tests, checking for all tightness of nuts and bolts, testing of the circuit at site on load with engineer in charge as per relevant IS.
