Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Security cabin with toilet at RCP Daheru |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms including getting out the excavated soil and disp osal of surplus excavated soil, all works up to any lead and lift, as directed by the Engineer-in-Charge :In all kinds of soil |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 4 | Supplying and filling selected earth/ moorum (excluding black cotton soil) from Contractor\"s own borrow areas including royalty, wit h all leads and lifts in low laying areas and filling to required grade and level including watering, compacting at optimum moisturecontent to 90% of Proctor\"s density, consolidation androlling with 8 to 10 tonne power rollerin layers not exceeding 20 cm thic kness, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. |
| 5 | anti-termite:Supplying all labour, materials, tools, chemicals, spray pumps etc. for making pre-constructional anti-termite treatmen t & creating a continuous chemical barrier under & all round the column pits, wall trenches, top surface of plinth filling, junctionof wall & floor, along the exterior perimeter of the building, complete in all respects inclusive of cost of all labour, materials,tools, tackles etc. as per drawings, specifications and direction of Site Engineer. [Note: Total plinth area of the buildingshallbe measured for payment]. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources] (in foundatation ) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 [1 cement : 4 coarse sand (Zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources](foundataion PCC) |
| 8 | Grading roof for water proofing treatment with :Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nom inal size) |
| 9 | Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natu ral sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources] |
| 10 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 Kg per square metre on dam p proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 11 | Making plinth protection 50 mm thick of cement concrete 1:3:6 [1 cement : 3 coarse sand derived from natural sources : 6 graded ston e aggregate 20 mm nominal size derived from natural sources] over 75 mm thick bed of dry brick ballast 40 mm nominal size, well ramm ed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, etc . complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direc tions of the Engineer-in-Charge. |
| 12 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishi ng and reinforcement - All work up to plinth level : 1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3graded stone aggregate 20 mm nominal size derived from natural sources] |
| 13 | Reinforced cement concrete (column)work in walls (any thickness), including attached pilasters, buttresses, plinth and string course s, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of c entering, shuttering, finishing and reinforcement, with :1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources] |
| 14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 Degree landings, balconies, shelves, chajjas , lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cos t of centering, shuttering, finishing and reinforcement, with :1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural s ources : 3 graded stone aggregate 20 mm nominal size derived from natural sources] |
| 15 | formwork -Centering and shuttering including strutting, propping etc. and removal of formwork for:Columns, Pillars, Piers, Abutments , Posts and Struts |
| 16 | formwork -Centering and shuttering including strutting, propping etc. and removal of formwork for :Suspended floors, roofs, landings , balconies and access platform (with water proof ply 12 mm thick) |
| 17 | formwork -Centering and shuttering including strutting, propping etc. and removal of formwork for: Lintels, beams, plinth beams, gir ders, bressumers and cantilevers (with water proof ply 12 mm thick) |
| 18 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete: Thermo- Mechanically Treated bars of grade Fe-500D or more |
| 19 | Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class designation 50 la id to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labo ur, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge |
| 20 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in :Cement mortar 1: 6 (1 cement : 6 coarse sand) |
| 21 | Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to fl oor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 22 | Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, cl addings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cut ting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. includingpre paration of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supplying& applying painting with two coats of epoxy paint \"EPILUX 155 High Build Enamel over a coat of \"EPILUX 610\" Primer of M/s BERGER orany other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of conc rete work). |
| 23 | Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring cl amp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the e xposed portion of the clamps complete. |
| 24 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of requireddia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neopre ne gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural d rawings and the directions of the Engineer-in-Charge. [Note: Glazing, paneling and dash fasteners to be paid for separately] :Powdercoated aluminium (Minimum thickness of powder coating 50 micron)(Fixed Portion) |
| 25 | Providing and fixing aluminium work For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and m aking provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required. [Note: Fitting s shall be paid for separately] :Powder coated aluminium (Minimum thickness of powder coating 50 micron) |
| 26 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket et c. complete as per the architectural drawings and directions of the Engineer-in-Charge. [Note: Cost of aluminium snap beading shall be paid in basic item] : With float glass panes of 5.50 mm thickness |
| 27 | Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer),of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, inskirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey ce ment slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete. |
| 28 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of first qualityconforming to IS:15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick be d of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including pointing the joints wit h white cement and matching pigments etc., complete. |
| 29 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than0.08 % and conforming to IS:15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of c ement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joint with white cement & matching pigments etc. complete :Size of Tile 600x600 mm |
| 30 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Raj Nagar Plain white marble / Udaipur green marble/ Zebra black marble for kitchen platforms, vanity counters, window sills, facias and similar locations of req uired size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treat ed with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to gi ve high gloss finish etc. complete at all levels :Area of slab over 0.50 sqm |
| 31 | Providing and laying 22 mm thick chequered precast cement concrete tiles in footpath, courtyard etc. on 20 mm thick bed of cement mo rtar1:4(1 cement:4 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, c leaning etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specification s and direction of Site Engineer.Light shade pigment using white cement |
| 32 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, blac k finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer of membrane s hall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical par ameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. ( b) Tear strength in longitudinal and transverse direction as 60/80N. (c) Softening point of membrane not less than 150°C. (d) Cold f lexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the aut horised applicator of the manufacturer of membrane. |
| 33 | Providing and fixing on wall face Unplasticised Rigid PVC (uPVC) rainwater pipes (110 mm diameter, single socketed) conforming to IS :13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion. |
| 34 | Providing gola 75x75 mm (in 75x75 mm deep chase) in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and do wn gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design. |
| 35 | Making Khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggr egate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse s and) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 36 | CEMENT PLASTER (IN FINE SAND)-15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement : 6 fine s and) |
| 37 | 6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand) |
| 38 | Providing & fixing galvanized chicken wire net 20 Gauge, 20 mm mesh size in plastering work at the junction of RCC Columns/ Beams & brickwork as directed by the Engineer-in-Charge. |
| 39 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wa ll surface to prepare the surface even and smooth complete. |
| 40 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, o f required shade and colour complete, as per manufacturer\"s specification :Two or more coats on new work |
| 41 | Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and incl uding priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 42 | Providing and fixing 12 mm thick Elevational Brick Tiles for facia, vertical face of walls, etc. at all levels and locations laid ov er and including a backing coat of 15 mm thick cement mortar (1 cement : 3 sand) and joints filled with coloured cement of same colo ur as tiles complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per specification and direct ions of the Engineer-in-Charge. |
| 43 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quali ty with necessary screws etc. complete. |
| 44 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includ ing painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x 450 mm with a pair of 15 mm C.P. brass pillar taps |
| 45 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including pro viding & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc. complete. |
| 46 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter |
| 47 | Providing and fixing 15mm diameter C.P. brass tap as per following with C.P. brass flange including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specificatio ns and directions of the Engineer-in-Charge :Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0037 or approved equivelent) |
| 48 | Providing and fixing 15mm diameter C.P. brass angle valve as per following with C.P. copper connecting pipe 375mm long or as require d including nuts, washers, C.P. brass flange, etc. including cutting & making good the walls wherever required, etc. complete in allrespects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Ch arge :Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 0053 or approved equivalent) |
| 49 | Providing and fixing 15mm diameter C.P. brass stop cock with wall flange (Ref. Make: JAQUAR, Model: Cat. No. 0933 or approved equiva lent), male end with C.P. copper connecting pipe 375mm long or as required including nuts, washers, C.P. brass flange etc. includingcutting & making good the walls wherever required complete in all respects inclusive of cost of all materials, labour, tools, tackl es etc. as per specifications and directions of the Engineer-in-Charge. |
| 50 | Providing and fixing approved quality C.P. brass Towel Rail of 20mm diameter & 600mm long including C.P. brass brackets fixed with w ooden cleats and C.P. brass screws etc. complete. |
| 51 | Providing & fixing 6mm thick, copper back finish, looking mirror of required size, made of float sheet glass of best quality & appro ved make, over 12mm thick marine board fixed to rawl plug with round head screws & washers including teakwood beading with melamine polish all around, complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications an d directions of the Engineer-in-Charge. |
| 52 | Constructing brick masonry Septic Tank with brickwork in cement mortar 1:6 including R.C.C. 1:2:4 (1 cement : 2 sand : 4 graded coar se aggregate) top slab, C.I. cover all as per standard drawing, etc. complete in all respects inclusive of cost of all materials, la bour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge :For 10 Users |
| 53 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diam eter, 1.8 m long complete as per standard design :With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5 |
| 54 | Providing and fixing self cleaning S.C.I. heavy quality Floor/ Nahani trap with 100mm diameter inlet and 100mm diameter outlet, 125m m C.P. brass grating (heavy type) with or without vent arm including cost of cutting and making good the walls and floors, jointing with lead caulked joints, connecting with waste water pipe etc. complete in all respects inclusive of cost of all materials, labour,tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. |
| 55 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including al l CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting s with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per directions of the Engineer-in-Charge :32 mm nominal dia pipes |
| 56 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including al l CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting s with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per directions of the Engineer-in-Charge :25 mm nominal dia pipes |
| 57 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including al l CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting s with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per directions of the Engineer-in-Charge :20 mm nominal dia pipes |
| 58 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Ref. Make: SINTEX or approved equivalent), I S:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but with out fittings and the base support for tank. |
| 59 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : 32 mm dia nominalbore for water Main supply pipe |
| 60 | Providing and fixing on wall face Unplasticised Rigid PVC (uPVC) rainwater pipes (110 mm diameter, single socketed) conforming to IS :13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion. |
| 61 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I cl amps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urin al basin with 5 litre white P.V.C. automatic flushing cistern |
| 62 | PVC Conduit pipes - Supply, installation, fixing in position, PVC conduit pipes, of ISI marked , in concrete, brick work etc. duringor after construction by making grooves in the wall, ceiling etc. cutting threads and jointing the pipes with PVC couplers, providi ng necessary tees, bends, junction boxes etc. with 12 SWG GI wire inside conduit without joint for concealed wiring, including makin g good the concrete, brick work, surfaces etc. complete as per drawings and direction of Site Engineer / Engineer-in-charge includin g cost of all labour, materials etc.: |
| 63 | Point wiring - Supplying, installation and testing with 1.5 Sq.mm stranded PVC insulated copper conductor wires for phase & neutral of 650V grade including earthing by providing 1.5 Sq.mm earth insulated continutity wire of copper in PVC conduit (Supply & installa tion of PVC conduit covered elsewhere in SOR) recessed on wall/ceiling/ false celing including supply & installation of switch boxes ,junction boxes, pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . The circuit wiring with 4 Sq.mm PVC c opper wire from D.B. to switchboard as required is also in the scope of the contractor:1 light point controlled by 1 switch |
| 64 | Wiring with PVC insulated 2.5 sqmm copper conductor wire for fan points (1 fan point controlled by 1 modular switch) including provi ding space for electronic regulator in switch box, providing and fixing fan hook in the ceiling as per specifications and drawings. |
| 65 | Ceiling fan, BEE 5 star rated, with electronic regulator & other accessories and fittings etc. of or approved make with 56\" Sweep si ze |
| 66 | \"EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing elec trodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer-in-cha rge, including the cost of all labour, tools, materials, etc. complete in all respect: 40 mm X 5 mm G.I. earthing strip \" |
| 67 | Supply, installation, testing and commissioning of single phase , Fresh Air Fans / Heavy duty Exhaust Fans of Bajaj/Crompton Greaves /Khaitan/Usha make only including supply and fixing with all necessary supports All complete with labour and materials as per drawin gs, specifications and directions of Engineer-in-Charge.. NOTE: Necessary civil works required for fixing the exhaust fans shall be in the scope of Contractor.FRESH AIR FAN WITH LOUVER SHUTTER 300MM SWEEP |
| 68 | Supply, fixing and connection of Philips/approved equivalent make tube light fittings alongwith tubes (tubes cost will be paid separ ately) and control gear the necessary control gear fully wired up and fixing on existing TW varnished double board round blocks on w all including supply & fixing of round blocks, lead in wire, nuts, bolts, screws etc. All complete with labour and materials as per directions of Engineer-in-Charge. TYPE TMS 021/136 (HPF) mounting rail for LED lamps with special integral lamp holder and bracket. |
| 69 | Tube light fittings including replacement of chokes, tubes, down rods, starters, starter holder, Tube rod and holders and all other accessories if needed including cleaning of the light fittings if required. All complete with labour and materials as per direction of the Engineer-in-Charge. |
| 70 | 15W, Outdoor LED Light Fitting, IP55, 230V AC - Supply, fixing in position, installation, connection, testing and commissioning of t he following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/ Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, MetallicStructures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. |
| 71 | 15W, LED Bulb/Lamp, 230V AC, 50Hz-Supply, fixing in position, installation, connection, testing and commissioning of the followi ng LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton o r equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structure s, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials,Transportation, Labor, Tools etc.. |
| 72 | Security cabin with toilet at nabha stn |
| 73 | 6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand) |
| 74 | Providing & fixing galvanized chicken wire net 20 Gauge, 20 mm mesh size in plastering work at the junction of RCC Columns/ Beams & brickwork as directed by the Engineer-in-Charge. |
| 75 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wa ll surface to prepare the surface even and smooth complete. |
| 76 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, o f required shade and colour complete, as per manufacturer\"s specification :Two or more coats on new work |
| 77 | Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and incl uding priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 78 | Providing and fixing 12 mm thick Elevational Brick Tiles for facia, vertical face of walls, etc. at all levels and locations laid ov er and including a backing coat of 15 mm thick cement mortar (1 cement : 3 sand) and joints filled with coloured cement of same colo ur as tiles complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per specification and direct ions of the Engineer-in-Charge. |
| 79 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quali ty with necessary screws etc. complete. |
| 80 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includ ing painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x 450 mm with a pair of 15 mm C.P. brass pillar taps |
| 81 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including pro viding & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc. complete. |
| 82 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter |
| 83 | Providing and fixing 15mm diameter C.P. brass tap as per following with C.P. brass flange including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specificatio ns and directions of the Engineer-in-Charge :Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0037 or approved equivelent) |
| 84 | Providing and fixing 15mm diameter C.P. brass angle valve as per following with C.P. copper connecting pipe 375mm long or as require d including nuts, washers, C.P. brass flange, etc. including cutting & making good the walls wherever required, etc. complete in allrespects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Ch arge :Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 0053 or approved equivalent) |
| 85 | Providing and fixing 15mm diameter C.P. brass stop cock with wall flange (Ref. Make: JAQUAR, Model: Cat. No. 0933 or approved equiva lent), male end with C.P. copper connecting pipe 375mm long or as required including nuts, washers, C.P. brass flange etc. includingcutting & making good the walls wherever required complete in all respects inclusive of cost of all materials, labour, tools, tackl es etc. as per specifications and directions of the Engineer-in-Charge. |
| 86 | Providing and fixing approved quality C.P. brass Towel Rail of 20mm diameter & 600mm long including C.P. brass brackets fixed with w ooden cleats and C.P. brass screws etc. complete. |
| 87 | Providing & fixing 6mm thick, copper back finish, looking mirror of required size, made of float sheet glass of best quality & appro ved make, over 12mm thick marine board fixed to rawl plug with round head screws & washers including teakwood beading with melamine polish all around, complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications an d directions of the Engineer-in-Charge. |
| 88 | Constructing brick masonry Septic Tank with brickwork in cement mortar 1:6 including R.C.C. 1:2:4 (1 cement : 2 sand : 4 graded coar se aggregate) top slab, C.I. cover all as per standard drawing, etc. complete in all respects inclusive of cost of all materials, la bour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge :For 10 Users |
| 89 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diam eter, 1.8 m long complete as per standard design :With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5 |
| 90 | Providing and fixing self cleaning S.C.I. heavy quality Floor/ Nahani trap with 100mm diameter inlet and 100mm diameter outlet, 125m m C.P. brass grating (heavy type) with or without vent arm including cost of cutting and making good the walls and floors, jointing with lead caulked joints, connecting with waste water pipe etc. complete in all respects inclusive of cost of all materials, labour,tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. |
| 91 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including al l CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting s with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per directions of the Engineer-in-Charge :32 mm nominal dia pipes |
| 92 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including al l CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting s with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per directions of the Engineer-in-Charge :25 mm nominal dia pipes |
| 93 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including al l CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting s with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per directions of the Engineer-in-Charge :20 mm nominal dia pipes |
| 94 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Ref. Make: SINTEX or approved equivalent), I S:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but with out fittings and the base support for tank. |
| 95 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : 32 mm dia nominalbore for water Main supply pipe |
| 96 | Providing and fixing on wall face Unplasticised Rigid PVC (uPVC) rainwater pipes (110 mm diameter, single socketed) conforming to IS :13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion. |
| 97 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I cl amps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urin al basin with 5 litre white P.V.C. automatic flushing cistern |
| 98 | PVC Conduit pipes - Supply, installation, fixing in position, PVC conduit pipes, of ISI marked , in concrete, brick work etc. duringor after construction by making grooves in the wall, ceiling etc. cutting threads and jointing the pipes with PVC couplers, providi ng necessary tees, bends, junction boxes etc. with 12 SWG GI wire inside conduit without joint for concealed wiring, including makin g good the concrete, brick work, surfaces etc. complete as per drawings and direction of Site Engineer / Engineer-in-charge includin g cost of all labour, materials etc.: |
| 99 | Point wiring - Supplying, installation and testing with 1.5 Sq.mm stranded PVC insulated copper conductor wires for phase & neutral of 650V grade including earthing by providing 1.5 Sq.mm earth insulated continutity wire of copper in PVC conduit (Supply & installa tion of PVC conduit covered elsewhere in SOR) recessed on wall/ceiling/ false celing including supply & installation of switch boxes ,junction boxes, pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . The circuit wiring with 4 Sq.mm PVC c opper wire from D.B. to switchboard as required is also in the scope of the contractor:1 light point controlled by 1 switch |
| 100 | Wiring with PVC insulated 2.5 sqmm copper conductor wire for fan points (1 fan point controlled by 1 modular switch) including provi ding space for electronic regulator in switch box, providing and fixing fan hook in the ceiling as per specifications and drawings. |
| 101 | Ceiling fan, BEE 5 star rated, with electronic regulator & other accessories and fittings etc. of or approved make with 56\" Sweep si ze |
| 102 | \"EARTH STRIP / WIRE / ROPE / CABLE - Supply, installing and testing of earthing strip/wire/rope/cable for completely making the eart hing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing elec trodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer-in-cha rge, including the cost of all labour, tools, materials, etc. complete in all respect: 40 mm X 5 mm G.I. earthing strip \" |
| 103 | Supply, installation, testing and commissioning of single phase , Fresh Air Fans / Heavy duty Exhaust Fans of Bajaj/Crompton Greaves /Khaitan/Usha make only including supply and fixing with all necessary supports All complete with labour and materials as per drawin gs, specifications and directions of Engineer-in-Charge.. NOTE: Necessary civil works required for fixing the exhaust fans shall be in the scope of Contractor.FRESH AIR FAN WITH LOUVER SHUTTER 300MM SWEEP |
| 104 | Supply, fixing and connection of Philips/approved equivalent make tube light fittings alongwith tubes (tubes cost will be paid separ ately) and control gear the necessary control gear fully wired up and fixing on existing TW varnished double board round blocks on w all including supply & fixing of round blocks, lead in wire, nuts, bolts, screws etc. All complete with labour and materials as per directions of Engineer-in-Charge. TYPE TMS 021/136 (HPF) mounting rail for LED lamps with special integral lamp holder and bracket. |
| 105 | Tube light fittings including replacement of chokes, tubes, down rods, starters, starter holder, Tube rod and holders and all other accessories if needed including cleaning of the light fittings if required. All complete with labour and materials as per direction of the Engineer-in-Charge. |
| 106 | 15W, Outdoor LED Light Fitting, IP55, 230V AC - Supply, fixing in position, installation, connection, testing and commissioning of t he following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/ Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, MetallicStructures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. |
| 107 | 15W, LED Bulb/Lamp, 230V AC, 50Hz-Supply, fixing in position, installation, connection, testing and commissioning of the followi ng LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton o r equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structure s, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials,Transportation, Labor, Tools etc.. |
| 108 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms including getting out the excavated soil and disp osal of surplus excavated soil, all works up to any lead and lift, as directed by the Engineer-in-Charge :In all kinds of soil |
| 109 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 110 | Supplying and filling selected earth/ moorum (excluding black cotton soil) from Contractor\"s own borrow areas including royalty, wit h all leads and lifts in low laying areas and filling to required grade and level including watering, compacting at optimum moisturecontent to 90% of Proctor\"s density, consolidation androlling with 8 to 10 tonne power rollerin layers not exceeding 20 cm thic kness, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. |
| 111 | anti-termite:Supplying all labour, materials, tools, chemicals, spray pumps etc. for making pre-constructional anti-termite treatmen t & creating a continuous chemical barrier under & all round the column pits, wall trenches, top surface of plinth filling, junctionof wall & floor, along the exterior perimeter of the building, complete in all respects inclusive of cost of all labour, materials,tools, tackles etc. as per drawings, specifications and direction of Site Engineer. [Note: Total plinth area of the buildingshallbe measured for payment]. |
| 112 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources] (in foundatation ) |
| 113 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 [1 cement : 4 coarse sand (Zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources](foundataion PCC) |
| 114 | Grading roof for water proofing treatment with :Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nom inal size) |
| 115 | Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natu ral sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources] |
| 116 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 Kg per square metre on dam p proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 117 | Making plinth protection 50 mm thick of cement concrete 1:3:6 [1 cement : 3 coarse sand derived from natural sources : 6 graded ston e aggregate 20 mm nominal size derived from natural sources] over 75 mm thick bed of dry brick ballast 40 mm nominal size, well ramm ed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, etc . complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direc tions of the Engineer-in-Charge. |
| 118 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishi ng and reinforcement - All work up to plinth level : 1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3graded stone aggregate 20 mm nominal size derived from natural sources] |
| 119 | Reinforced cement concrete (column)work in walls (any thickness), including attached pilasters, buttresses, plinth and string course s, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of c entering, shuttering, finishing and reinforcement, with :1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources] |
| 120 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 Degree landings, balconies, shelves, chajjas , lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cos t of centering, shuttering, finishing and reinforcement, with :1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural s ources : 3 graded stone aggregate 20 mm nominal size derived from natural sources] |
| 121 | formwork -Centering and shuttering including strutting, propping etc. and removal of formwork for:Columns, Pillars, Piers, Abutments , Posts and Struts |
| 122 | formwork -Centering and shuttering including strutting, propping etc. and removal of formwork for :Suspended floors, roofs, landings , balconies and access platform (with water proof ply 12 mm thick) |
| 123 | formwork -Centering and shuttering including strutting, propping etc. and removal of formwork for: Lintels, beams, plinth beams, gir ders, bressumers and cantilevers (with water proof ply 12 mm thick) |
| 124 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete: Thermo- Mechanically Treated bars of grade Fe-500D or more |
| 125 | Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class designation 50 la id to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labo ur, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge |
| 126 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in :Cement mortar 1: 6 (1 cement : 6 coarse sand) |
| 127 | Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to fl oor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 128 | Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, cl addings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cut ting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. includingpre paration of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supplying& applying painting with two coats of epoxy paint \"EPILUX 155 High Build Enamel over a coat of \"EPILUX 610\" Primer of M/s BERGER orany other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of conc rete work). |
| 129 | Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring cl amp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the e xposed portion of the clamps complete. |
| 130 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of requireddia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neopre ne gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural d rawings and the directions of the Engineer-in-Charge. [Note: Glazing, paneling and dash fasteners to be paid for separately] :Powdercoated aluminium (Minimum thickness of powder coating 50 micron)(Fixed Portion) |
| 131 | Providing and fixing aluminium work For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and m aking provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required. [Note: Fitting s shall be paid for separately] :Powder coated aluminium (Minimum thickness of powder coating 50 micron) |
| 132 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket et c. complete as per the architectural drawings and directions of the Engineer-in-Charge. [Note: Cost of aluminium snap beading shall be paid in basic item] : With float glass panes of 5.50 mm thickness |
| 133 | Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer),of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, inskirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey ce ment slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete. |
| 134 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of first qualityconforming to IS:15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick be d of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including pointing the joints wit h white cement and matching pigments etc., complete. |
| 135 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than0.08 % and conforming to IS:15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of c ement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joint with white cement & matching pigments etc. complete :Size of Tile 600x600 mm |
| 136 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Raj Nagar Plain white marble / Udaipur green marble/ Zebra black marble for kitchen platforms, vanity counters, window sills, facias and similar locations of req uired size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treat ed with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to gi ve high gloss finish etc. complete at all levels :Area of slab over 0.50 sqm |
| 137 | Providing and laying 22 mm thick chequered precast cement concrete tiles in footpath, courtyard etc. on 20 mm thick bed of cement mo rtar1:4(1 cement:4 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, c leaning etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specification s and direction of Site Engineer.Light shade pigment using white cement |
| 138 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, blac k finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer of membrane s hall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical par ameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. ( b) Tear strength in longitudinal and transverse direction as 60/80N. (c) Softening point of membrane not less than 150°C. (d) Cold f lexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the aut horised applicator of the manufacturer of membrane. |
| 139 | Providing and fixing on wall face Unplasticised Rigid PVC (uPVC) rainwater pipes (110 mm diameter, single socketed) conforming to IS :13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion. |
| 140 | Providing gola 75x75 mm (in 75x75 mm deep chase) in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and do wn gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design. |
| 141 | Making Khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggr egate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse s and) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 142 | CEMENT PLASTER (IN FINE SAND)-15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement : 6 fine s and) |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
