Uttar Pradesh Housing And Development Board-UPAVP has published Construction Of 11 Kv Linefrom 33 / 11Kv Substation Akbarpur Chogawan To Kotdwar Road Yojna Followed By Crossing Railway Line And Nhai Road For Energization Of External Electrification Work Done At Kotdwar Road Yojna, Najibabad.. Submission Date for this Tender is 18-07-2022. Electrification Work Tenders in najibabad Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | SITC of 11 KV section/dead end Four pole (Bottom section Galvanaised) structure made of following types of supports duly grouted. Plinthed plastered and painted in the same manner asspecified for respective supports with four nos. channels of size 100x50mm M.S. channel, 9 no. 11 kv Pinsulator and 2 Nos. bracing of angle iron size 65x65x6mm 3M length fixed with packing piece and bolt and nuts as required including cost of material, labour and T & P required for proper completion of work as per direction of E/I. [Only manufacturers whosehave GTPwill be approved in PVVNL] |
| 2 | 11 Mts. longSP-55 |
| 3 | Making suitable earth of H.T. overhead line pole with 2.5 Mts. long 20mm M.S rod connected with 7/16 SWGG.S. wire duly clamped & binded on pole including the cost of materials, labour and T & P required for proper completion of work as per direction of E/I. |
| 4 | Supply and Burring of Safe Earthing Electrode T-39 Zn-Zinc Coated, Length 3000 mm, outer pipe 76.30 mm x 3.2 mm, inner pipe 42.40 mm c 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti orrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square CI frame with hinged cover & masonary housing (From electrode terminal to switch board, cost of 25 x 3 GI Strip will be extra) UPPWD SOR-2018 item no. 727 (D) [Make as approved in UPPWD & CPRI Certified.] |
| 5 | Supply/laying/Testing/commissioning of following type high conductivity aluminum strand compacted circular conductor XLP (E) armoured 11KV cable neutral earthed system confirming to IS 7098-Part-II(1985) with latest amendment laid in existing HDPE pipe at the defth of 2 to 2.5 m below G.L. cable shall be properly connecting with the earth conductor by clamps etc. with the cost of all material, labour, T&P etc. required for proper completion of the work. [MAKE:POLYCAB/GLOSTER/STERLITE/TORRENT/L.S.CABLE/ HAVELL"S ONLY ] |
| 6 | 300Sqmm XLPE cable |
| 7 | Supplay and making Indoor cable end termination with heat shrinkable jointing kit complete with all accessoriesincludinglugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11KV grade as required. As par DSR 2018 (E/M) SI NO. 10.4.4 [ Make : RAYCHEM/3M] |
| 8 | 300Sqmm for 11 KV cable |
| 9 | Supplay and making Outdoor cable end termination with heat shrinkable jointing kit complete with all accessoriesincludinglugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11KV grade as required. As par DSR 2018 (E/M) SI NO. 10.5.4 [ Make : RAYCHEM/3M] |
| 10 | 300 Sqmm for 11 KV cable |
| 11 | S/F and layingof HDPE pipes (upto Pn 6kg pressure Rating material Grade PE 80, Nominal Dia (OD) 160mm 9.1mm thicknes with cable below ground upto 1.50m to 2.00m By Drilling machine Complete in all respect as per relevants IS Technical Specification. |
| 12 | S/F of cable route marker made of 1:2:4 R.C.C. Block size 1000x400x10 mm grouted with 1:3:6 cement stone grit coarse sand 30cm below G.L. with painting numbering & marking etc. complete with all required material T&P etc. complete in all respects as per direction of E/I. and drawing attached |
| 13 | S/F of following GIpipe "B" class for cable duly clamped with supports by 3 nos. with clamps of 20x3mm M.S. flat bolts nuts & washers required for proper completion of work. [Make:TATA/SAIL/JINDAL] |
| 14 | S/F of danger board (L.T.) size 200x250 mm at suitable height of pole as per direction of E/I |
| 15 | S/F of barbed wire (1.5kg) duly clamped with 20x3mm M.S. flats at both ends on steel poles at suitable height as per direction of E/I. |
| 16 | Supply/ Installation, Testing and commissioning of 11 KV indoor Outgoing 1250Amp 26.3kA/3-sec, pannel with SCADA compatibility as per technical specification including loading, unloadingcarriage & eraction of the same on M.S channel & making all necessary connect ion etc, as per direction of E/I. [Pannel will only acceptable whose manufacturer having :- i. Validapproval from CPRI/ERDA etc ii. GTP should be approved from PVVNL iii. Manufacturer should be approved from UPPWD.] |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
