Tender For Line Shifting Full Deposit Work In Bundelkhand Expressway Under Edd-Chitrakoot- Work 2 Undergoud Cabling Work Of Chainege No-85+810, 87+935, 88+050, 88+090, 88+180, & 88+250 In Bundelkhand Expresswayunder Full Deposit Scheme Year 2022-23 Under Edd, Chitrakoot, Details Of The Work As Given Below :- 3 Cartage Of Material 4 Cartage Of 11 Kv Xlpe 3X185 Sqmm Cable From Store To Respective Site Place Through Kaccha Pacca Road Including Loading Unloading By Crane / Labour. 5 Safe Cartage Of 8.5 Mtr. Long Pcc Poles From Store Centre Or From Any Other Place To The Respective Site Of Work Through The Kachha Pacca Road Including The Work Of Its Loading & Unloading At The Respective Ends Also Including The Work Of Dragging. 6 Safe Cartage Of 11 Mtr. Long Stp Poles From Store Centre Or From Any Other Place To The Respective Site Of Work Through The Kachha Pacca Road Including The Work Of Its Loading & Unloading At The Respective Ends Also Including The Work Of Dragging. 7 Safe Cartage Of Line Material Cable, Gi Earth Wire, Cross Arm, Angle, Channel, Insulator, Clamps And Other Line Material From Store Centre Or From Any Other Place To The Respective Site Of Work Through The Kachha Pacca Road Including The Work Of Its Loading & Unloading At The Respective Ends Also Including The Work Of Dragging. 8 Erection Work 9 Erection Of Single Support On 8.5 Mtr. Pcc Poles, Including Complete H.T. / L.T. Fittings As Per Direction Of Engineer Incharge / Resspo Manual. 10 Concreting / Grouting Of Single Support On 8.5 Mtr. Pcc Poles. The Support Shall Be Grouted With Cement, Sand And Brick Ballast / Stone Ballast In Ratio 1:4:8 ( 0.285 Cu. Mtr. Each ) , Including The Cost Of Arrangement Of Cement, Sand, Brick Ballast / Stone Ballast, Stone Pad Etc. As Per Actual Site Requirement & Direction Of Enginner Incharge. 11 Erection Of Single Support On 11 Mtr. Stp Poles, Including Complete H.T. / L.T. Fittings As Per Direction Of Engineer Incharge / Resspo Manual. 12 Concreting / Grouting Of Single Support On 11 Mtr. Stp Poles. The Support Shall Be Grouted With Cement, Sand And Brick Ballast / Stone Ballast In Ratio 1:4:8 ( 0.285 Cu. Mtr. Each ) , Including The Cost Of Arrangement Of Cement, Sand, Brick Ballast / Stone Ballast, Stone Pad Etc. As Per Actual Site Requirement & Direction Of Enginner Incharge. 13 Erection Of Double Pole Structure On 11 Mtr. Stp Poles, Including Complete H.T. / L.T. Fittings As Per Direction Of Engineer Incharge / Resspo Manual. 14 Concreting / Grouting Of Double Pole Structure On 11 Mtr. Stp Poles. The Support Shall Be Grouted With Cement, Sand And Brick Ballast / Stone Ballast In Ratio 1:4:8 ( 0.285 Cu. Mtr. Each ) , Including The Cost Of Arrangement Of Cement, Sand, Brick Ballast / Stone Ballast, Stone Pad Etc. As Per Actual Site Requirement & Direction Of Enginner Incharge. 15 Erection And Grouting Of Stay Set Including The Work Of Nozelling Etc. As Per Resspo Manual And Also Including The Cost Of All Grouting Material. 16 Fixing Of Earthing Rod As Per Direction Of Supervising Engineer / Resspo Manual. Including The Cost Of Labour, T&P Etc. Required For Proper Completion Of Work. 17 Laying, Stringing, Binding And Termination Etc. Of Lt Ab Cable Of Size 3X95 / 3X50 Sq.Mm. On The Newly Erected Line As Per Direction Of Supervising Engineer / Resspo Manual. 18 Laying Of 11 Kv 3X185 Sq.Mm Xlpe Double Circuit Cable Protecting Through Hdd Method Insulated Cable To Be Laid Underground In Hdpe Pipe. ( Hdpe Pipe Shall Be Arranged By Contractor ) 19 Installation Of Heat Shrinkable Type Cable Jionting Kit O / D End Termination Suitable For 11 Kv Xlpe Cable Confirming To Is Esi-09-13-Is-13573 Of 1992 Amendment I&Ii Vde-0278 Of Latest Version There Of If Any. ( Jointing Kit Shall Be Arranged By Contractor ) 20 Hoisting And Fixing Of 11 Kv Cable On Existing / Erected Support With Provision Of Gi Pipe 6 Inch Dia 3 Mtr. Long Suitable Of 3X185 Sq.Mm Cable Fixing Of Proper Support And Its Clamping, Jumpering Properly As Per Resspo Norms. 21 Providing, Fixing & Fabrication Of Top Channel ( 125X65x2240mm. ) As Per Norms Complete In All Respect 22 Providing, Fixing & Fabrication Of Dropper Channel ( 100X50x2028mm ) As Per Norms Complete In All Respect 23 Shiffting Of T / F On Dp With Base ( 75X75x6x2028mm ) Angle With Nut Bolt As Per Norms Complete In All Respect 24 Providing, Fixing & Fabrication Of T / F Base ( 75X75x6x2028mm ) Angle With Nut Bolt As Per Norms Complete In All Respect 25 Providing, Fixing & Fabrication Of T-Off Channel ( 100X50x2028mm ) For Do And Tpmo Set As Per Norms Complete In All Respect 26 Dismentling Of Exposure, Lt S / S And Other Acceseries From Old Place To Safe Place Including The Work Of Loading And Unloading And The Respective Ends.
