|
| 1 | Taking down chowkhat with shutter without taking off shutter from chowkhat not exceeding 1.5 Sqm each complete all as specified and directed |
| 2 | Ditto all as per item No 1 above but exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed |
| 3 | Taking down shutter of any description nexc 1 Sqm each complete all as specified and directed |
| 4 | Taking down shutter of any description exc 1 Sqm but n\"exc 2 Sqm each complete all as specified and directed |
| 5 | S&F 35mm Flush shutters (ISI Marked) solid core construction, with block board core and plywood, commercial type on both sides complete all as specified and directed |
| 6 | S&F 35mm Flush shutters (ISI Marked) solid core construction, with block board core and plywood, commercial type on both sides both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed |
| 7 | S&F 35mm thick glazed and skeletion shutters 2nd class hardwood without sash bars complete all as specified and directed |
| 8 | Supply and fix 30mm thick, 2nd class hard wood, glazed and skeleton window shutters, open rebated and prepared to receive glass or gauge etc divided into square with framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass or gauges etc sizes of members of shutters as specified in SSR Part-I Section 8 clause 8.24 (b) complete all as specified and directed. |
| 9 | S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glasing bars dovetail ed or welded all complete all as specified and directed |
| 10 | S&F powder coated Aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specifiecation and making good the adjascent surfaces :-(a) Window frame of cross section 101mm x 40mm x 1.5mm thick.(b) Three way track for smooth slding shutters of cross sections 91.80mmx31.75mmx1.1mm thick.(c) Sliding shutter frame of cross section 40x18x1mm.(d) Aluminium glazing stip of size 18.2x16.66mm.(e)4mm thick flat glass superior quality for two shutter.(f) IDPE rubber gasket for fixing glass.(g) Locking cleat/device as shutter 01 Nos.(h) 02 Nos sliding roller per shutters.(j)aluminium wire cloth 0.36mm stainless steel nominal dia of wire and average width of aperature 1.40mm for one shutter.(k) Fixing screws for frame with wall 06 per window with fancy design.(Note: Window will be measured outer to outer frame and no extra to be paid.) |
| 11 | M&L for powder coated alumunium chowkhat of size 101.6mmx44.5mmx1.5mm thick in section fixed to walls and alumunium frame with anodised alumunium screws complete all as specified and directed |
| 12 | S&F powder coated alumunium glazed door shutter with two panel made of vertical style of size 85x 44.5 x 1.5mm and Top rail size 114.30x44.5mmx1.5mm bottom rail 150mm x 44.5mmx1.5mm and middle rail 114.3mm x 44.5mmx1.5mm all alumunium section including all fittings as per door shutter such as alumunium door handles round type-2 Nos, stainless steel hinge 100mm size -4 Nos, central mortice lock, alumunium tower bolts 300mm-2 Nos double leg alumunium anodised door stopper and hydraullic door closer, designation No 2, universal type, cast iron body ISI marked and necessary clips rubber packing and alumunium beading to receive and including 5.5mm thick plain tined glass or 6mm thcik alumunium composite panel in top and bottom panel. complete all as specified and directed. (Note: Door shutter will be measured outer to outer frame and no extra will be paid). |
| 13 | S&F pressed steel frames of size 125 x 60 mmx1.25mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,complete all as specified and directed |
| 14 | S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specified and directed. Make : RAJYSHREE PLASTIWOOD, M/S SINTEX |
| 15 | Supplied and fixed factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame as per specification & drawing complete all as specified and directed |
| 16 | Dismantling of fillets rails etc under 40 sqcm in section in framed work complete all as specified and directed |
| 17 | S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete withot glazing bars dovetail ed or welded all complete all as specified and directed |
| 18 | S&F factory made steel ventilators with top hung shutters including hinges, steel peg stay complete all as specified and directed |
| 19 | S&F GI mild steel wire cloth 0.56 nominal dia wire and average width aperture 1.18mm and fixed with pinned tack or galvanized staples complete all as specified and directed |
| 20 | S&F in repair GI mild steel wire cloth 0.56 nominal dia wire and average width aperture 1.18mm and fixed with pinned tack or galvanized staples all complete all as specified and directed |
| 21 | Re-securing or easing and adjusting without taking down wooden shutter of any description not exc 1Sqm each complete all as specified and directed |
| 22 | Re-securing or easing and adjusting without taking down wooden shutter of any descriptionexc 1Sqm but n exc 2 Sqm each complete all as specified and directed |
| 23 | Running welding in repairs thickness of metal to be welded exc 6mm but n exc 9mm complete all as specified and directed |
| 24 | M&L 2nd class H/wood chowkhats, plain, solid, straight, wrought, framed, rebate on the solid,rounded or chamfered put together with glue pinned at joints complete all as specified and directed |
| 25 | M&L for mild steel works as in hold fast/wind ties etc, complete all as specified and directed |
| 26 | S&FMS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 27 | S&F in repairMS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 28 | S&F mild steel sliding door bolts 300mm long complete all as specified and directed |
| 29 | S&F in repairmild steel sliding door bolts 300mm long complete all as specified and directed |
| 30 | S&F 100mm size MS butt hinges, medium weight cold rolled complete all as specified and directed |
| 31 | S&F in repair 100mm size MS butt hinges, medium weight cold rolled complete all as specified and directed |
| 32 | S & F 200mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 33 | S & F in repair 200mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 34 | S & F 150mm long Aluminium handle cast type anodised complete all as specified and directed |
| 35 | S & F in repair 150mm long Aluminium handle cast type anodised complete all as specified and directed |
| 36 | S&F 75 mm longmild steel medium weight collrolled butthinges complete all as specified and directed |
| 37 | S&F in repair 75 mm longmild steel medium weight collrolled butthinges complete all as specified and directed |
| 38 | S&F 125mm size aluminium handles, cast type anodised complete all as specified and directed |
| 39 | S&F in repair 125mm size aluminium handles, cast type anodised complete all as specified and directed |
| 40 | S&F 150mm long Aluminium anodised barrel tower both of extruded section complete all as specified and directed |
| 41 | S & Fin Repair 150mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 42 | S&F small fitting shaped door and window stops n\"exc 200 cucm each of 2nd class hard wood complete all as specified and directed |
| 43 | S&F 50mm Butt hings medium weight cold rolled and mild steel complete all as specified and directed |
| 44 | S&F in repair 50mm Butt hings medium weight cold rolled and mild steel complete all as specified and directed |
| 45 | M&L mild steel works as in framed work such as grills, gratings, etcwith ends of bars shoulderedand/or riveted or forged into spikes and similar works conforming to Fe-290, Gde-E165 etc complete all as specified and directed |
| 46 | M&L for 18/19 mm thickpreliminated particle board Exterior grade preliminatedone side with decorative choice laminated & other side balancing white laminated fixed with screw to timber fram workcomplete all as specified and directed |
| 47 | S & F 30 mm continous (piano) hinges mild steel, bright finish or electro galvanisedcomplete all as specified and directed |
| 48 | S&F 75 mm Hasp & staple MSstove enammeled black, including bolt to hinge plate and fixed with screw complete all as specified and directed |
| 49 | S&F 40mm dia , cupboard knobs fixed with nut, screw and washer of mild steel, bright finishedcomplete all as specified and directed |
| 50 | M & L preparation of new surfaces & apply two coats of synthetic enamel paint over one coat primer exc 10 cm width/girth including preparation of new surface on wooden surface complete all as specified and directed |
| 51 | M&L in applying two coats of synthetic enamel paints over a coat of red oxideprimer on new steel surfaces over 10 cm width or girth including preparatinon of surfacescomplete all as specified and directed |
| 52 | M&L PCC (1:2:4) type B1 20mm grade aggregate as in padding, hold fasts/filling of chowkhats or similar work complete all as specified and directed |
| 53 | Hacking out old broken glass any thickness from metal/wooden frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed |
| 54 | S & F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane 3mm thick complete all as specified and directed |
| 55 | Ditto all as per item No 54 above but n.exc 0.5 sqm in each pane of 3mm thick figured glass complete all as specified and directed |
| 56 | Dismantling water tanks and removingexc 250 & nexc 500 ltrs capecity complete all as specified and directed |
| 57 | Dismentling water tanks and removingexc 500 and n exc 1000 ltrs capecity complete all as specified and directed |
| 58 | S&F 500 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions, including 20mm dia of ball valved high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed with anti microbial property, complete all as specified and directed |
| 59 | S&F 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions, including 20mm dia of ball valved high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed with anti microbial property, complete all as specified and directed |
| 60 | S&F 20mm dia of ball valves high pressure of PTMT with epoxy coated alumunium rod & high density plastic ball screwed for iron pipe and fixed in repair complete all as specified and directed |
| 61 | S&F as in repair PVC water tank cover for 500/1000 ltr capacity suitable for closing of water tank with locking device and all as specified and directed. |
| 62 | Disconnecting exisiting tanks setting aside for repairng cleaning and removing al scale and dirt etc from mounths of circulating pipes etc and hoisting .reconnecting and refixing in existing position. Capacity of tanks exc 500 ltrs and not exc 1000 ltrscomplete all as specified and directed |
| 63 | Disconnecting exisiting tanks setting aside for repairng cleaning and removing al scale and dirt etc from mounths of circulating pipes etc and hoisting .reconnecting and refixing in existing position. Capacity of tanks exc 250 ltrs and not exc 500 ltrscomplete all as specified and directed |
| 64 | Taking up or down steel tubing and connections including for refixing or removal 15mm borecomplete all as specified and directed |
| 65 | Ditto all as item No 64 above but 20mm bore complete all as specified and directed |
| 66 | S&F steel tubingand connection in new or old position to walls, ceiling, floors etc complete all as specified and as directed 15 mm bore medium grade, with all fittings, fitted to wall and ceiling or laid in floor complete all as specified and directed |
| 67 | All as per item No 66 above but for 20mm dia complete all as specified and directed |
| 68 | Dismantling wall and ceiling board (fibre, pulp, insulations etc) or insulation board any thickness including cover fillets complete all as specified and directed |
| 69 | M&L Anodised alumunium snap grid frame work for false ceiling grid of size 605mm x 605mm complete hanges from GI wire complete all as specified and directed |
| 70 | S&F 4mm thick texture finish type ceiling board fixed to timber/metal framed work with screw as in ceiling snap grid complete all as specified and directed |
| 71 | Taking down eaves gutters and rain water pipes (any size or patterns)including all fittings, heads, shoes, bends, swan-necks etc complete all as specified and directed |
| 72 | S&F PVC (SWR) pipe 110 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and directed |
| 73 | S&F PVC (SWR)pipe 75 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and directed |
| 74 | S&F PVC (SWR) bends any radius 110 mm dia complete all as specified and directed |
| 75 | S&F PVC (SWR)bends any radius 75 mm dia complete all as specified and directed |
| 76 | S&F in repair PVC (SWR) floor trap 75mm dia plain with grating incl jointing with solvent cement complete all as specified and directed |
| 77 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed |
| 78 | Supply and fix in repair, sinks with drainage board made of stainless steel 1 mm thick sheet for, kitchen or laboratory with plugs, washers and waste pipe; cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mmcomplete all as specified and directed |
| 79 | S&F as in repairs utensil rack/kitchen rack stainless steel size 850xmmx800mmx270mm as approved make and fixed to wall and complete all as specified and directed |
| 80 | S&F in repairvitreous china wash Basin white flat back size 550 x 400mmincluding brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed |
| 81 | S&F in repair vitreous china squatting pan , Orissa pattern size 580 x 440 mm white, with integral foot rest including connection to trap and to flush pipe, anti-syphonage etc, complete all as specified and directed |
| 82 | S&F 40 mm low density polyethylene (HDPE) pipes, complete all as specified and directed |
| 83 | S&F as in repairs pillar tap cast 15mm bore copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettred head `HOT\" or `COLD\" with long screwed shank and flynuts screwed for iron pipe (half turn type) complete all as specified and directed |
| 84 | S&F in repairs bib taps fancy type half turn, cast copper alloy chromium plated 15mm bore with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and complete all as specified and directed. |
| 85 | S&F in repair 32mm waste fittings brass chromimum plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed |
| 86 | S&F in repairs PVC valveless syphonic action with dual flushing system fancy type low level flushing cistern 10 ltr. Capacity of approved incl flush pipe of 32mm bore complete all as specified and directed |
| 87 | S&F in repair PVC Connections 15mm size with PTMT nuts of length 450mm including washer, complete all as specified and directed |
| 88 | S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed |
| 89 | S & F in repair Tubular towel rail, 20mm dia, D type, 60 cm long between flanges CP brass complete all as specified and directed |
| 90 | S&F in repair 15mm, stop valve/angle valve, half turn type cast copper alloy fancy type chromium plasted with long shank and cup screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore (with fancy design) and complete all as specified and directed |
| 91 | S&F as in repair 15mm hlaf turn, two way angle valve, cast copper alloy fancy type chromium plasted screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in 15mm bore complete all as specified and directed |
| 92 | S&F in repair 15mm dia bore, stop valve (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in pipe complete all as specified and directed |
| 93 | S&F in repairs brass CP mixer tap, fancy type, half turn 15mm dia bore (three in one) for mixing hot and cold water screwed down for iron pipe and fixed in wall and complete all as specified and directed. |
| 94 | S&F in repairs brass 15mm dia CP mixer basin tap (Mixer pillar tap) 15mm dia bore for mixing hot and cold water with lettered `HOT\" and `COLD\" screwed down for iron pipe (with fancy design) complete all as specified and directed. |
| 95 | Supply and fixing as in repairs vitreous china urinal, half stall type, whitewith grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 96 | Supplied and fixed in repairvitreous chinawareEWC padestal type closet with whiteseat & cover with flat bottom with hinging device complete all as specified and directed. |
| 97 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish offpremises etc complete all as specified and directed |
| 98 | Demolition ofcement concrete (un-reinforced) in ground floors and pavingnot exceeding 15 cm thickness below or above the ground floor etc complete all as specified and directed |
| 99 | Brushing neat cement slurry with 3.00 Kg of cement per sqm complete all as specified and directed |
| 100 | M&L for light shadevitrified ceramic tiles 10mm thick (square/rectangular)polished,area of each tiles n exc 0.36sqm over 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed |
| 101 | Ditto as per item No 100 above but in skirting dado etc over 10mm thick cement plaster in CM (1:4) complete all as specified and directed |
| 102 | M&L Non- skid colour ceramic tiles,7 to 8mm thick square/rectangular area of each tile exc 0.11 sqm but n exc 0.18sqm in floor over and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed. |
| 103 | Ditto as per sl item No.102 but in skirting including 10mm thick screed bed in CM (1:4) complete all as specified and directed |
| 104 | M & L Non Skid ceramic colour ceramic tiles 7 to 8mm thick square/rectangular area of each tile 0.06sqm but not exceeding 0.11sqm ,in floors over and including 15mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfacecoloured cement to match the floor complete all as specified and directed |
| 105 | M&L for coloured glazed ceramic colour tiles in vertical surface in Skirting/Dados 350mm x 250mm x 7mm /450 x 350 x 7mm thick over and including10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed |
| 106 | M&L Machine cut kota stone slab flooring 20-25 mm thick set over and including 15mm thickscreed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishingcomplete all as specified and directed |
| 107 | All as per item No 106 above but here-in-before as in skirting over 10mm thick cement plaster in CM (1:4)complete all as specified and directed |
| 108 | Material and Labour for 20mm thick machine cut (table rubbed and polished) Granite of any type as in steps, jambs, pillars, cills, cooking platforms like in CM (1:4) including pointing with white cement mixed with admixture of pigment to match the shade of the slab complete including screed bed 15mm thick in CM (1:6) all as specified and directed |
| 109 | Rounding to edges of stone slabs on edge such as in steps cooking platform and other similar situationscomplete all as specified and directed |
| 110 | M&L plain cement concrete, Type D-2, (1:4:8) using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed |
| 111 | M&L 100 mm thick cement concrete in foundations /sub base of floor in cement morter (1:3:6) type C-2 complete all as specified and directed |
| 112 | M&L Cement concrete in floors 40mm thick over sub base (1:2:4) type B1 using 20mmgradedaggregate finished even and smooth without using extra cementcomplete all as specified and directed |
| 113 | Forming Contration (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound (1 part of bitument and 3 part of sand)complete all as specified and directed |
| 114 | M&L plain cement concrete, Type C-2, (1:3:6) using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed |
| 115 | M&L chequered cement concrete tiles with grey cement and no pigment 30cmx30cmx25mm thick over 15mm thick screed bed in CM (1:6) set jointed and pointed in neat cement slurry in floors complete all as specified and directed |
| 116 | M&L machine pressed precast concrete interlocking paver block with Grey Cement and pigment any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade laid over and including 25mm thick sand cushioning complete all as specified anddirected |
| 117 | M&L for spreading and levelling of sand in layers n exc 25cm thick over sub basecomplete all as specified and directed |
| 118 | Demolition ofBrick/stone works masonry, built in cement mortar or cement limemortar including all quoins, arches, pillars etc but excludingashlar facing, dressed stone work andpre-cast concrete articles complete all as specified and directed |
| 119 | M&L brick work using sub class B brick curved or straight on plan exc 6 mtr mean radius built in CM (1:6), complete all as specified and directed |
| 120 | M&L brick work using sub class B brick curved or straight on plan to any radius in half brick wall builit in CM (1:4) complete all as specified and directed |
| 121 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 122 | M&L rendering on other than fair faces of brick work 15mm thick in CM (1:6) and to be finished smooth and even with out using extra cement for internal surfacecomplete all as specified and directed |
| 123 | M&L rendering on other than fair faces of brick work 15mm thick in CM (1:4) and to be finished smooth and even with out using extra cement for external surfacecomplete all as specified and directed |
| 124 | M&L Rendering 5mm thick in CM (1:3) on ceilling. surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 125 | M&L for applying two coats of white wash on new wall/concrete surfaces including preparation of newly plastered surfaces complete all as specified and directed |
| 126 | M&L for preparingthe new plastered surfacesof walland applying twocoats of cement based paint after one coat of white primer complete all as specified and directed |
| 127 | M&L for preparing newly plastered surfaces and applying two coats of distember oil emulsion white or tinted on walls and including average 3mm thick white wall care putty to achieve even and smooth surfacecomplete all as specified and as directed by Engr-in-Charge. |
| 128 | M&L for precast reinforced cement concrete M-15, using 20mm graded stone aggregate set in CM (1:4) as in cover slab (for manhole etc) including use & waste of form work for fair finished surfaces complete all as specified and directed |
| 129 | M&L mild steel deformed TMT bar 8mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed |
| 130 | M&L forcement concrete type E2 (1:5:10), (40 mm graded aggregate in sunken portion complete all as specified and directed. |
| 131 | M&L for rendering 15 mm thick on concrete orbrick surface in CM (1:3) mixed with WPC as per manufacturer instructions and finishes surfaces even and smooth with out using extra cement. Note : WPC will be measured and paid separtely |
| 132 | M&L for applying two coats evenly a tack coat of hot air blown bitumen of grade 85/25 @ 1.50 Kg per sqm per coat (one coat overplaster and one coat on polythene film) including cleaning of surface over polythene film complete all as specified and directed |
| 133 | M&L for polythene film black 200 micron thick laid in floor, vertical surface etc complete all as specified and directed. |
| 134 | M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in sunken portion and making adequate slope toward spout pipe complete all as specified and directed. |
| 135 | Supply only liquid water proofing compound, complete all as specified and directed |
| 136 | coplete removal of all existing roof treatment from RCC roof including old hussion felt and preparation of surface with bire brush and cleaning with water complete all as specified and directed. |
| 137 | M&L for preparation of concrete roof surfaces and applying 10mm thick plaster in CM (1:4) and finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 138 | M&L for applying a coat of bitumen primer @ 0.3L/sqm on roof surfaces, complete all as specified and directed |
| 139 | M&L for applying 3mm thick APP modified polymeric membrane over the bitumen coat surface weight not less than 3kg/sqm and over lap 100mm and sealed by torch application as per manufacture insteructions complte all as specified and directed |
| 140 | M&L for applying two coats aluminium paint over bituminous surface of membrane, complete all as specified and directed |
| 141 | M&L 22 mm thick machinepressed & polished‘ cementconcrete tiles with grey cement withoutpigmentofsize 250 mm x 250 mm laid in neat cement slurry over and including 15 mm thick bed screed in CM (1:4) mixed with chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIESLTD 200 milli litre mixed with 50 Kg of cement or STP No 1 (LIQUID) of STP LTD in proportion 200 milli litre per 50 Kg cement, aspermanufactures instructions and tiles properly laid with 3 mm wide joints filled with FEVIMATE TG of DR FIXIT of PIDILITE INDUSTRIES LTD or TILEGLUE of STPLTD as per manufactures instructions complete all as specified and directed |
| 142 | M&L forrepair and rendering 10mm thickin CM (1:3)on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete (1:2:4) Type B-0 using 12.5mm gradedaggregate including necessary scafolding work for double/ single storey bldgscomplete all as specified and directed |
| 143 | Taking down aluminum glazed shutter from frames for servicing / replacement of broken pivots, screws etc, complete & refixing in the same opening after repair. (The servicing shall include oiling of hydraulic door closer / floor door spring tightening / refixing of handles, tightening of joints of rail & styles etc & opening of pivot plate & replacement & refixing to obtain smooth opening & closing, complete all as specified and directed |
| 144 | S&F in repairs decorative curtain rod made out of 25mm dia (outer dia) MS pipe having wall thickness 0.63mm, PVC coated of any colour and pattern as approved overall dia 28 to 28mm, includiing and including two nos brackets on each ends alongwith globe on each ends for earch window/door fro fixing (with fancy design), complete all as specified and directed |
| 145 | S&F as in repairs corner glass shelf 300mm (with fancy ABS brackets) of size (300x300)mm complete all as specified and directed |
| 146 | S&F as in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commerial ply wood and fixed to wooden plugs with chromium plated brass screwes and cup washer (with fancy design), complete all as specified and directed |
| 147 | S&F bath cabinet mirror of size 350x450mm made of PTMT alloy (with fancy design), complete all as specified and directed |
| 148 | S&F as in repairs health faucet (ABS body) mild steel chromium plasted suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed |
| 149 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 |
