Construction Of Shandy In Sf.No.15/1 Sakthi Main Road At Chithode Town Panchayat Erode District
Tender Value
93.16 Lakhs
Estimated cost
Bid Submission
20 Jul 2022
0 days left
EMD
1.86 Lakhs
Bank guarantee accepted
Document Fee
17700
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chithode → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Shandy In Sf.No.15/1 Sakthi Main Road At Chithode Town Panchayat Erode District
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 B. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10with refilling of earth work standard specifications . |
| 2 | Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m iin Soft disintegrated rock, Laterite, Soft rock or Kankar, not requiring blasting etc. complete. complying with std. specifications. etc.,as per. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10with standard specifications. |
| 3 | Supply delivery and Filling of Gravel in Layer of not more than 15 cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyance of Gravel at site and all labour charges and all other incidential charges etc., complete as per Standard Specification. |
| 4 | Plain Cement Concrete 1:4:8 Mix (one part cement, four part M sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. |
| 5 | Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86. |
| 6 | Column Matt and Grade Beam |
| 7 | Column |
| 8 | Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. |
| 9 | Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3. |
| 10 | Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m? and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS Standards.(No separate payment will be made by the Department for the excess usage of materials). |
| 11 | Brick Work in Cement Mortor 1:5 Mix (one cement, five sand ) using new best countryBricks of size 8 ¾”x 4 ¼”x 2 ¾”from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications.TNDSS No.31& similar to 31C,V,VI(S5),VII |
| 12 | Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.TNDSS No.61,V,VI(S4),III |
| 13 | Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications. (The Colour and shade of the paint shall be got approved by the departmental officers.) TNDSS No.61,V,VI(S4),III |
| 14 | Painting new iron works such as steel doors, Windows,Ventilators, Mindour,balustrades etc, with two in all floor withtwo coat ofbest approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc,complete complying with Standard Specification. ( The1 Make, Quality and colour of paint should be got approved bythe executive engineer before use on works ) |
| 15 | Fabricating, Supplying and Errecting the Pre Engineer Steel Building Structure using Galvanised Structural SteelStructureConfirming to Grade 50 with Yield Strength of 345 MpaBase Plate,sag rods ,Stutts including cleats to receive Z or C Purlins cutting,Drilling holes, Welding,Grinding fixing the Members with Necessary Bolt,Nuts, Anchor Bolts with approved quality of Hosting,Aligning and Plascing the Tsection in Position as per Design got approved from the deparment. fixing Purlin with Sag rods,supporting tje Purlins from theBeams on both side.The welding Shoud be done with submerged arc welding to full lengt. the rate inclusive of the cost of the painting the members with one coat of Primer of Zinc chromite and Enamel paint etc Complete complying with standard specifications |
| 16 | Supplying and fixing of drilling holes for roofing with prepainted Galvalum sheet 0.47 mm thick of best approved quality with required size with using shape andwhich redge sheet with necessary bolts, nutts and bitunen washer including cutting the sheet to the required size found necessary drawring excution etc completecomplyingwith Standard specifications. |
| 17 | Supplying laying and jointing 110 mm dia P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessaryscaffolding charges. |
| 18 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC OPEN light point / Fan point (For Electronic regulator). etc, complete as per standard specifications.SD 16 |
| 19 | Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box in flush with wall with 3mm thick hylum sheet for 15A 3pin non interlocking flush type CS plug with painting suitable colour with continuous earth wire connection of 14 SWG TC wire for open power plugpoint. SD 14 |
| 20 | Supply and fixing of 20W - 4ft LED fitting with LED with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.(TWAD-SOR:2021-2022, Page No.173) |
| 21 | Providing and fixing Bitumen Pad for Expansion joint in between pavement slabs to 12mm thick and fixed as shown in the drawing including cost and conveyence of expansion joints including shalimar pad and joint sealent etc, complete as per standard specification sl.no.252 (a) |
AI Tender Summary
Tender Timeline
Jul 07, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 20, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender