Educational and Research Institute Government Departments Closing in 0 days TDR #32975816

Construction Of Kindergarten At High School Dudu Kirchi Zone Dudu District Udhampur C

Issued by Government Departments · jammu, Jammu And Kashmir
Tender Value
65 Lakhs
Estimated cost
Bid Submission
18 Jul 2022
0 days left
EMD
1.30 Lakhs
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
jammu → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of Kindergarten At High School Dudu Kirchi Zone Dudu District Udhampur C

BOQ

Name of Work: CONSTRUCTION OFKINDERGARTEN AT HIGH SCHOOL DUDU KIRCHI ZONE DUDU DISTRICT-UDHAMPUR
Sl. No. Item Description
1Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: . All kinds of soils
2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level( 1 : 4 : 8) 1 cement 4 coasre sand 8 stone aggregate grade, with 40mm nominal size . crushed
3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level( 1 : 3 : 6)1 cement 3 coasre sand 6 stone aggregate grade , with 20mm nominal size . crushed with 20% boulders.
4Providing and laying in position reinforeced cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level( 1 : 1.5 : 3)1 cement 1.5 coasre sand 3 stone aggregate grade , with 20mm nominal size . crushed
5Reinforced cement concrete work in wall (any thickness) including attached pilasters \"buttresses\"plinth and string courses\"fillet ,column pillar\"piers ,abutment \"post and sturts etcupto floor five levelexcluding the cost of centering and shuttering ,finishing and reinforement ( 1 : 1.5 : 3 )1 cement 1.5 coasre sand 3 stone aggregate grade , with 20mm nominal size . crushed
6Brick work with common burnt clay F.P.S (Non-modular) brick of class designation 75 in foundation and plinth in 1:6(1 cement : 6coarse sand)
7Extra for brick work in Super structure above plinth level upto floor V level (By manual means)
8Half brick masonry with bricks of class designation 75 in foundations and plinth inCement mortar 1 :4 ( 1 cement : 4 coarse sand) .
9Extra for half Brick masonry in superstructure above plinth level upto floor V level.
10Reinforcement of RCC work in Plinth band incl straightening, cutting, bending, placing in position and binding all complete.
11Centering and shittering including strutting propping etc and removal of form workFoundation footingbases of columns etc
12Centering and shuttering incl. struting, proping ,etc.and removal of form work for; lintel beam ,plinth beam ,girders,bressumers andcantilevers
1312 mm cement plaster on wall of mix 1:6 ( 1 cement 6 fine sand )
1415mm cement plaster on wall of mix 1:6 ( 1 cement 6 fine sand )
15Providingwoodworkinframesofdoors,windows, clerestory windows and other frames, wrought framed and fixedin position with hold fast lugs or with dash fasteners of requireddiaandlength(holdfastlugsor withdash asteners shall be paid for separately): Sal wood
16Providing and fixing paneled or glazed shutters for doors and windows and clestory windowsusing 10 kg /sqm (4mm thick) float glass panes including ISI marked black enameled M.S. butt hinges bright finished of requried size with necessary screws, (35mm thick of 2nd class deodar wood).
17Providingandfixing35mmthickwiregauzeshutters usinggalvanised M.S.wire gauze of average widthfor aperture1.4 mminbothdirectoin with wire of dia.0.63 mmfordoors,windowsandclerestorywindowswith hinges andnecessary screws: Second class deodar wood.
18Providingandfixingpanelledorpanelledandglazed shuttersfordoors,windowsandclerestorywindows includinglSImarkedM.S.pressedButthingesbright finished of required size with necessary screws excluding panelling which willbepaidfor separately,al!including 12 mm ply complete as per direction of engineer- in charge. Second class deodar wood
19Providing & laying vitreified floor tiles in different size ( thichness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS 15622 of approved make in all colours and shades laid on 20 mm thick cement mortar 1:4 ( 1cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. ( size of tile 60 x 60 cm) DOUBLE CHARGE
20Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
21Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete.
22Providing and fixing retifiedceramic glazed tiles(300x300)thicknessTo be specfied by maunfacture )OF 1 st quality conforminf to IS ;13755ofNITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades exceptwhite ,ivory,grey,fume red,brown on20 mm thick bed of Cement Mortar 1:4 ( 1 cement: 4 coarse sand) and including pointing in white cement mixed with pigment of matching shade complete.
23Providing and laying damp proof coarse 40 mm thick with cement concrete 1:2:4and complte curing
246 mm cement plasterof mix 1:4(1cement 4 sand )
25Centering and shuttering incl. struting, proping ,etc.and removal of form work for edges of slab under 20 cm
26Centering and shuttering incl. struting, proping ,etc.and removal of form work for suspended floors,roofing ,landings,balconies and access platform
27Supply and fixing of 1200 mm sweep celing fan make havells , crompton, or equalient
28Applying priming coat with ready mixed pink or grey primer of approved brand and manufactures on wood work (hard and soft wood)
29Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacturers in all shades (two or more coats) on new work
30Making plinth protection 50mm thick with cement concrete ( 1 : 3 : 6) 1 cement : 3 Coarse sand: 6 stone aggregate)20 mm nominal size f stone aggregate over 75 mm bed of dry brick ballast , 40 mm nominal size of well rammed and consolidated and grouted with fine sand including finishing the top smooth.
31Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to preparethe surface even and smooth complete.
32Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coat ) over and including priming coat with cement primer
33Providing and applying 3D Painting on surfaces of walls and celling making drawing shades, letters , shapes as directed byor site incharge engineer
34Finishing wall with acrylic smooth exterior paint of reqd. shade on new works(two or more coat [email protected] liter/10 sqmover and including base coat of water proofing cement paintApplied
35Electric wiring with 1.5 sqmm copper cable including 20 mm dia 2mm thick PVC pipe 5amp with sunken box and connection to the main pole complete as directed by engineer-incharge.
36Providing and Fxing aluminium tower bolt ISI marked anodized (anodic coating not less than grade AC as per IS 1868) transparent or dyed to required colouur or shade with necessary screws etc. complete .
37Providing and Fxing aluminium handleISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete100mm
38Providing and Fxing aluminium handleISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 125mm
39Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complet.e300x16 mm
40ProvidingandfixingMs grill of reqd. patter in frame of window etc with M S flat ,square or round bars ,railing;pipe etc all complete fixed to opening/window frame with raw plugs,screw etc
41Filling available excavated earth(excluding rock) in trenches ,plinth,sudes of foundation etc.Layers not exceeding 20 cm in depth,conslidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.
42Providing and fixing water closet squatting pan (indian type) with100 mm sand Iro P or S trap , 10 litre low leve PVC flushing ctstern includingC. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floorswherever required: Orissa pattern white viyterus china WC pan of size 580 X 440 mm withintegral type foot rest
43Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 550x 400 mm with a pair of 15 mm C.P. brass pillar taps
44Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception , of pipes and fittings.
45Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc. INTERNAL WORK(medium) 15 mm
46Providing and fixing wall face unplasticisedRigidPVC rain water pipe confirming to ISI 13592 type A incl.jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion of dia 110mm(make prince or supreme )
47Providing and fixing wall face unplasticisedRigidPVC rain water pipe confirming to ISI 13592 type A incl.jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion of dia 75mm(make prince or supreme )
48Providing and fixing wall face unplasticisedRigidPVC rain water pipe confirming to ISI 13592 type A incl.jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion of dia 150mm(make prince or supreme )
49Providing and fixing wall face unplasticisedRigidPVC rain water pipe confirming to ISI 13592 type A incl.jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion o BEND dia 110mm(make prince or supreme )
50Providing and fixing wall face unplasticisedRigidPVC rain water pipe confirming to ISI 13592 type A incl.jointing with seal ring confirming to IS 5382 leaving 10mm gap for thermal expansion o BEND dia 75mm(make prince or supreme )
51Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings completesemi rigid pipes 32mm dia.
52Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS893115 mm nominal bore .
53Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 893115 mm nominal bore
54Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms:-
55Providing and fixing Pvc floor trap
56Providing and fixing grating of approved brand 100 mm nominal dia.
57Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
58Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license]
59Construction of brickmasonary manhole in cement mortar 1:4 (1 cement 4 coarse sand )Rcc top Slab with1:1.5:3 Mix (1 cement 1.5 coarse sand3 stone aggt. 20 mm nomial size ) foundation concrete 1:4:8 mix(1 cement 4 coarse sand8 stone aggt. 40 mm nomial size ) insideplastering 12mm thick cement mortar 1:3(1 cement 3 coarse sand )finished with a floating coat of neat cement and makinf channel in cement concrete 1:2:4 (1 cement 4 coarse sand8 stone aggt. 40 mm nomial size ) finished with a floating coat of neat cement complete as per standard design inside size 90x80 cm and 45 cm deep including CI coverwith frame light duty 455x610 mm internal dimension total weight of cover and frame to be not less than 38 kg and weight of cover 23kg and weight offrame 15 kg with FPS brick with class designation 75 and with crushed stone aggt.
60Making soak pit 2.50 mm dia 3 mt. deep with 45x 45 cm dry brick honey comb shaft with brick of class designation 75 and SW drain pipe 100 mm dia. 1.8 mm long complete as per standard designwith FPS brick
61Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering- All work upto plinth level 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) crushed
62supply and fixing wooden flooring8 mm thick over floor with adhesive including foam and completed specficationhall
63Cement concrete flooring in (1:2:4) 1 cement : 2 coarse sand : 4 stone aggregate finishing with a floating coat of neat cement including cement slurry but exd. The cost of nosing of step etc. complete 50mm thick with 20 mm nominal size stone aggregates (crushed)
64Carriage 0f materialby mechanical transportincluding loading ,unloading and stacking completed sand lead up to 145 kmand head load lead upto 200 m av
65Carriage 0f materialby mechanical transportincluding loading ,unloading and stacking completed stone aggreate lead up to 70 kmand head load lead upto 200 m av
66Carriage 0f materialby mechanical transportincluding loading ,unloading and stacking completed brick lead up to 150 kmand head load lead upto 200 m av

AI Tender Summary

OUR REF NO 32975816
AUTHORITY Government Departments
TENDER VALUE 65 Lakhs
LAST DATE 18-07-2022
Authority
Authority Name Rashtriya Madhyamika Shiksha Abhiyana
Work Description Construction Of Kindergarten At High School Dudu Kirchi Zone Dudu District Udhampur C
Basic Detail
Tender No E-NIT No. 64 of 2022-23 dated 06-07-2022
Bidding Type Tender
Location
City jammu
State Jammu And Kashmir
Key Dates
Publish Date 06 Jul 2022
Submission Date 18 Jul 2022
Open Date 19 Jul 2022
Finance
Tender Value 65 Lakhs
Tender Fee 1500
EMD 1.30 Lakhs
Exemption Not Available
Document List
e9384d79-737e-4110-b19e-30c2ecb9d638.html
BOQ_432371.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 06, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 18, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 19, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

e9384d79-737e-4110-b19e-30c2ecb9d638.html

xls

BOQ_432371.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders