Improvement To Sh 272 To Dadgaon Bhota Bhastan Road ( Odr 54 ) Ta. Nandura, Dist.Buldana.Ch. 3 / 500 Km To 5 / 500 Km With Hot Mix
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Jul 2022
0 days left
EMD
35500
Bank guarantee accepted
Document Fee
1120
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhota → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement To Sh 272 To Dadgaon Bhota Bhastan Road ( Odr 54 ) Ta. Nandura, Dist.Buldana.Ch. 3 / 500 Km To 5 / 500 Km With Hot Mix
BOQ
| Sl. No. | Item Description |
| 1 | Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area .(SSR Item No.2.07) |
| 2 | Excavationforroadwayinearth,soilofallsorts,sand,gravelorsoftmurumincluding dressing section to the required grade, camber and side slopes and conveying the excavated materialswithallliftsuptoaleadof50m.andspreadingforembankmentorstackingasdirected. Item No 2.11 |
| 3 | Excavationfor catch/side water gutter inallsorts ofsoils to the specified section including stacking the excavated stuff in a regularbundanddisposingofunsuitableorexcessstuffas directed all sorts of soils. By Mechanical Means (E CSR Item No.2.18) |
| 4 | Dismantling of existing B.T. Surface (flexible Pavement) to a depth of 50 mm. manually including loading of dismantled material to transport vehicle at site excluding lead charges (SSR Item No.3.28) |
| 5 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II(Using Screening Type B (11.2 mm) Aggregate) (E CSR Item No.3.20) (Reference No.MORTH 404) (Additional Specification..MORTH 404 For KM 4 |
| 6 | Km 5 |
| 7 | Km 6 |
| 8 | Providingandconstructing75mm.thickModified PenetrationMacadam(MPM)road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubbleobtained by blasting) heating and spraying thebitumen of specified grade @ 2 Kilogram/Square Metre, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compactionas per TechnicalSpecificationClause 506 etc. complete.Including picking of existing WBM surface. (VG-30bulkbitumenratesareconsidered to arrive at rates) Km 5 |
| 9 | Km 6 |
| 10 | Providingandapplyingtackcoatonthepreparedsurface heatingby fames inBoiler andsprayingbitumenset footedin bitumenbolleronB.T.surface2.5kg/10sqm.VG30bulk bitumen (E CSR Item No.3.3) (Reference No.MORTH 503) KM 5 |
| 11 | Km 6 |
| 12 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) (E CSR Item No.4.12) (Reference No.MORTH 511 Km 5 |
| 13 | KM 6 |
| 14 | Providing and laying of Type - B premix seal coat with HMP of appropratecrushed stone chipping 6.70 mm size and penetration bitumen of specified grade @ 0.68 Kg / Sqm. , preparing existing road surface including mixing in suitable Batch Mixplant and rolling bystatic roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) (E CSR Item No.4.03) (Reference No.MORTH 513 Km 5 |
| 15 | Km 6 |
| 16 | Supplyinghardmurum/kankarattheroadsite,including conveying and stacking complete. (E CSR Item No.2.29) (Reference No.MORTH 408) (Additional Specification..MORTH 408 ) Km 4 |
| 17 | KM 5 |
| 18 | KM 6 |
| 19 | Spreading hard murum for side width etc. complete (E CSR Item No.2.3) (Reference No.MORTH 408) (Additional Specification..MORTH 408 ) |
| 20 | Compactingthehardmurumsidewidthsincludinglayingin layers on each side with power roller including artificial watering etc. complete. (E CSR Item No.2.31) (Reference No.MORTH 408) (Additional Specification..MORTH 408 ) |
| 21 | Providing andlaying cement concrete pipe of IS 458:2003 NP-2class of 1200mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (E CSR Item No.11.13) |
| 22 | Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. prepared on 16 gaugeM.S.sheetwithangleironframeofsize35x35x5mmincludingpaintingwithonecoatofzinccromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade. Item No 6.47 |
| 23 | Providingandfixingboarddisplayinginformation,suchas \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18gauge (1.25mm)thick mild steelsheetpaintedwithonecoatofZincchromatestoving primer andtwocoats ofenamelpaintonfrontside andgrey stoveenamelonbacksideandborder/messages/symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles ofsize 35mmx35mmx3mmdulypaintedincludingTwoM.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m longpaintedwithalternateblackandwhitebandsof25cm widthincludingallfixturesetc.andfixingtheboardsin1:4:8 concreteblockofsize60cmx60cmx75cmincluding, excavation,refilling,transportation,andlabouretccomplete. Spec. No. As directed by Engineer in Charge (E CSR Item No.6.36) (Reference No.MORTH 801) (Additional Specification..MORTH 801 |
| 24 | Royalty of 40 mm Metal H B,Murum |
| 25 | Add for Material Testing Charges for40mm metal Grade and 12mm metal -Water Absorption,Specific Gravity,Inpact Value / Crushing Value Tests |
| 26 | Sieve Analysis |
| 27 | Flakiness Index and Elongation Index-Tests |
| 28 | Sieve Analysis- Tests |
| 29 | Sieve Analysis- Tests |
| 30 | Add for Material Testing Charges for Hard MurumSieve Analysis- Tests |
| 31 | Add for Material Testing Charges for BitumenPenetration , Softening Point, Flash and Fire Point , Specific Gravity - Tests |
| 32 | Add for Material Testing Charges for Mix Metal- Extaction- Tests |
AI Tender Summary
Tender Timeline
Jul 06, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 23, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender