}

Construction Work Of Steel Pre-Fabricated Hajrigah As Per Requirement In All Zones Of Municipal Corporation Heritage Jaipur (Annual Rate Contract) , jaipur-Rajasthan

Department Of Local Bodies has published Construction Work Of Steel Pre-Fabricated Hajrigah As Per Requirement In All Zones Of Municipal Corporation Heritage Jaipur (Annual Rate Contract) . Submission Date for this Tender is 15-07-2022. PEB Tenders in jaipur Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

32962629
Construction Work Of Steel Pre-Fabricated Hajrigah As Per Requirement In All Zones Of Municipal Corporation Heritage Jaipur (Annual Rate Contract)
Open Tender
Indian
Rajasthan
jaipur
15-07-2022

Tender Details

Construction Work Of Steel Pre-Fabricated Hajrigah As Per Requirement In All Zones Of Municipal Corporation Heritage Jaipur (Annual Rate Contract)

Key Value

Document Fees
INR 1000 /-
EMD
INR 130180.0 /-
Tender Value
INR 65.09 Lakhs /-

BOQ Items

Name of Work:uxj fuxe gSfjVst t;iqj ds leLr tksu esa vko";drkuqlkj LVhy izh&QSczjhdsVsM gktjhxkg fuekZ.k dk dk;ZA ¼okf"kZd nj lfoank½
Sl. No. Item Description
1Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coatIn gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
2Supply & installation of precoated galvanized iron profile sheets(size, shape and pitch of corrugation as approved by Engineer-incharge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxyprimer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches while ransportation and should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I.limpet washers or with G.I.limpet washers filled with white leadcomplete upto any pitch in horizontal/ vertical or curved surfacesexcluding the cost of purlins, rafters and trusses and includingcutting to size and shape wherever required.
3Wiring of light point / fan point / exhaust fan point / call bell point with 1.5 sq. mm FR PVC insulated unsheathed 1.1kV grade flexible copper conductor and 1.5 sq.mm FR PVC insulated copper earth conductor (IS:694) of approved make in double lock/ ISI marked single lock pvc casing capping & it"s accessories, 18 SWG M.S box with earth terminal, screwless cage connectors for neutrallooping in switch board & false ceiling point, 6 A switch 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers , making connections, testing etc. as required.
4P & F of capacitor start, three speed wall mounting/cabin fan of following sweep with the help of anchor bolts including making connection testing etc. as required.400 mm sweep(Oscillating type)
5P & F strip type fluorscent tube fitting fabricated from (CRCA sheet and finished with powder coating / stove enamelled paint)/(extruded non corrosive UV resist EP channel) complete with accessories like (OCCB, starter, starter seat)/ EB, rotor holder, terminal block duly prewired with copper conductor including making connection, testing etc. as required. ( without tube) 1 X 36 Watts with OCCB.
6P & F Fluorscent tube rod in existing fixtures as required
7S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required20 mm
8Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size.10.0 Sq.mm4 core.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail