Welcome Maintenance And Repair / Maint Of B / R And E / M Items At Offrs Md Accn At Rms Under Age B / R-Ii.
Tender Value
42.50 Lakhs
Estimated cost
Bid Submission
19 Jul 2022
0 days left
EMD
85000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rangapahar → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Welcome Maintenance And Repair / Maint Of B / R And E / M Items At Offrs Md Accn At Rms Under Age B / R-Ii.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards, slabs, blankets any thickness, incl cover fillets |
| 2 | Dismantling boarding any description fixed in any position with nails |
| 3 | S&F 4 mm thick 600x600mm size HSPC(High Pressure Steam Cured) prepainted, textured designer board , E Board classic to be fixed on GI grid/section size 600x600mm with main rummer 38x24x0.9 mm thick,cross tee 28.6x24x0.9 and wall angle 19x19x0.9mm duly suspended with hanger any size ,comprising of 4 mm dia MS wire J type hook, nuts and bolt holding down clips complete all as specified and directed |
| 4 | Dismantling mild steel or wrought iron work of any description not otherwise provided for. |
| 5 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness below or above ground level |
| 6 | Dismantaling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbbish off the premises. |
| 7 | M&L for non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to matchincluding screed bed 15mm thick in CM 1:6all as directed . |
| 8 | M&L for coloured Non Skid Ceramictiles7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in whiteor coloured cement to match including screed bed 15mm thick in CM 1:6all as directed . |
| 9 | All as per ser No 9 but on vertical surfaces such as skirting , dado risers to stepsover and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed. |
| 10 | M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm,7mm thickover and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed. |
| 11 | M&L 75 mm thick cement concrete type C2 1:3:6 (40 mm graded aggregate) as in plinth protection, using extra cement for finishing. |
| 12 | Demolition of unreinforced cement concrete of any description and inany position not otherwise specifically provided for. |
| 13 | M&L cement concrete type C2 1:3:6 (40 mm graded agg) as in surface channels and drains |
| 14 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms moulds |
| 15 | Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto |
| 16 | M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed. |
| 17 | Taking down chowkhat or frame not exc 1.5 sqm each (with out taking off shutters from the frame) |
| 18 | Taking down chowkhat or frameexc 1.5 sqm not exc 4 sqm each (without taking off shutters from the frame) |
| 19 | Taking down shutters only area n. exc 1Sqm each. |
| 20 | Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each |
| 21 | M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints |
| 22 | M & L 25mm thick second class hard wood boarding , plained one side with butt joints as ineaves boards . |
| 23 | M & L for block boards, 18/19 mm thick, grade2 quality, interior grade , commercial type fixed with screws to timber frame work , for cup board including lipping / beading as required complete all as specified and directed. |
| 24 | S & F 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work,for cup board including lipping / beading as required complete all as specified and directed. |
| 25 | M&L for external teak wood lipping 6 mm thick , fixed with nails on particle board 12 mm thick |
| 26 | S&F 40 mm dia, cupboard knobs fixed with nut , screw and washer of brass, polishedcomplete all as directed |
| 27 | S & F 125 mm bright finished brass hasp and staple ,safety type with mild steel hinge pin including bolt to hinge plate and fixed with screw.complete all as specified and directed |
| 28 | S&F 30mm thick continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed. |
| 29 | S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed by Engineer - in - Charge |
| 30 | M&L 35 mm thick 2nd class HW plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density , wood particle board with commercial face veneers , supplied and fitted to chowkats. |
| 31 | M/L 35mm thick 2nd class hard woodGlazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified. |
| 32 | M/L 30mm thick 2nd class hard woodGlazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified. |
| 33 | M/L 30mm thick 2nd class hard woodGlazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebatedwithout sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified. |
| 34 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C\" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 35 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing |
| 36 | S&F steel windows or ventilators, fixed type, with glazing bars. |
| 37 | S&F mild steel framed work as in grill, grating etc with end of bars shouldered and /or riveted or tonged into spikes, frame guard bars barrel iron doors, ladders, frame balusters, walk ways, railing.Grame work of water tanks and similar works confirming to Fe 410-0 or Fe 310-0 complete |
| 38 | M&L butt hinges medium grade cold rolled mild steel and fixed size of hinges 100 mm thick |
| 39 | M&L butt hinges, medium weight 75 mm long size |
| 40 | S/F Aluminium anodised barrel tower bolt of extruded section and fixed 200 mm long |
| 41 | S&F Aluminium handle cast type anodised 150 mm long |
| 42 | S&F 125mm size aluminium handles,cast type,anodised all as directed complete all as specified and directed. |
| 43 | S/F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section(300 mm long) |
| 44 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm. |
| 45 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame includingpunching or drilling out old glazing pins/spring clips and providingfixing new ones. |
| 46 | M&L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. .5 sqm each pane complete all as specified and directed. |
| 47 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples all as directed by Engineer- in -Charge. |
| 48 | Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, fascias, fins and similar works. |
| 49 | M&L forreinforced cement concrete (nominal mix) 1:2 :4 type B1 using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like. Note :- Reinforcement & formwork shall be measured and paid for separately. |
| 50 | S&F TMT MS bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia as specified . |
| 51 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete. |
| 52 | S&F in repairsfor Draperly rod /Harrison rails of stainless steel of 20mm dia with fixing brackets , stops, rollers and ringsetc. |
| 53 | S&F drapary rod, aluminium powder coated 25mm dia including required numbers of wooden brackets, side caps and wooden rings @ 12cm c/c complete all as specified and directed. |
| 54 | Easing of door/windows shutters for easy closing or opening n exc 1sqm leaf tightening of hinges or changing the position of hinges adjustment of tower bolt, sliding bolt etc complete all as directed. |
| 55 | Fixing of loose existing pelmet boxes made of 19mm thick block board by embedding wooden gutties in cement mortar (1:3) with MS clips and screws etc length of pelmet box not exc 1.50 mtr.complete all as diredted |
| 56 | All as per serial item No 55.00here -in-before butlength of pelmet box exc 1.50m and n.exc. 2.50mtr. |
| 57 | Repair to cupboard /Kitchen cabinetsincl easing of cup board shutters tightening of piano hinges fixing of handle/knobhasp & staple etc (one unit self comprise of one CB irrepective of Nos of shutters).,complete all as directed. |
| 58 | M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. - |
| 59 | M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. |
| 60 | M&L for preparation of new steel surfaces of any description, n exc 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer. |
| 61 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing. |
| 62 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing. |
| 63 | Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing. |
| 64 | Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing. |
| 65 | M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth. |
| 66 | S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore. |
| 67 | S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore. |
| 68 | S&F CPVC 20 mm outer dia pipes SDR 11 & plain CPVC SDR fittings consealed pipe line to walls & ceilings or laid in floors complete all as specified |
| 69 | S&F CPVC 25 mm outer dia pipes SDR 11 & plain CPVC SDR fittings pipe line to walls & ceilings or laid in floors complete all as specified |
| 70 | M&L dismantling water tank of exc 250 ltr and not exc 500 ltr Capacity. |
| 71 | S&F rotational moulded polyethylene 500 Ltrs Capacity water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified anddirected. . |
| 72 | S&F rotational moulded polyethylene 1000Ltrs Capacity water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified anddirected. . |
| 73 | Disconnecting existing tanks, setting aside (or loweringif required)for repairs, cleaningthe complete inner surface by rubber/nylon scraper to remove sludge/silt and washing with bleaching power solution and then clear water, etc. and hoisting in postion if required reconnecting and re-fixing in position. |
| 74 | Taking down AC/Salt glazed warepipes and fittings upto 110mm. |
| 75 | S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor |
| 76 | S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor |
| 77 | S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall |
| 78 | S&F of 110mm dia PVC (SWR) bends |
| 79 | S&F 75mm PVC(SWR) bends any radius with access door. |
| 80 | S&F of 75 mm dia PVC (SWR) Vent cowl |
| 81 | S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 82 | S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof |
| 83 | Dismantling of CI pipes 100mm dia. |
| 84 | All as in item No 83 above but 75mm dia of pipes. |
| 85 | S&F Cast iron 100mm bore Sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, fixed to walls, Stack clamps madeout of 50 mm by 3 mm flat iron, bolts & nuts, securing ends of stays to wall with antisyphonic pipes up to 4th storey high. |
| 86 | S&F Cast iron 100mm bore Bends (any radius), diminishing pieces or taper |
| 87 | S&F Cast iron 100mm bore Branch pieces, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches and aceess door complete. |
| 88 | S&F Cast iron 100mm bore cowls |
| 89 | S&F Cast iron 75mm bore sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, fixed to walls incl Stack clamps madeout of 50 mm by 3 mm flat iron, bolts & nuts, securing ends of stays to wall with antisyphonic pipes. |
| 90 | S&F Cast iron 75mm bore Bends (any radius), diminishing pieces or tapers |
| 91 | S&F Cast iron 75mm bore Branch pieces, double (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches |
| 92 | S&F Cast iron 75mm bore cowls |
| 93 | M&L for Granite (of any type) work (table rubbed and polished) 16 to 18mm thick in flooring over & including 20mm thick screed bed (bedding layer) in CM 1:4, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite including cutting and polishing (half mirror polish i.e. half granite polish as per local trade practice) all as specified & directed by Engineer-in-charge. |
| 94 | S&F in repair soap dish chromium plated stell/stainless steel, approx size 160x160mm x 1mm thick , fixed to walls with plugs & CP brass screws complete all as specified and directed. |
| 95 | Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed |
| 96 | S&F in repair 15 mm dia bib tap short body cast copper alloy(fency type), chromium plated ,\"with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule all as directed. |
| 97 | Supply & fixing as in replacement 15mm Bib taps, chromium plated cast copper alloy with crutch orbutterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixedcomplete all as specified and as directed by the Engr-in-Charge. |
| 98 | S&F in repairs concealed stop valve, cast copper alloy, with crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe all as directed. |
| 99 | S&F in repair fancy type pillar tap, cast copper alloy with capstan heads,chromium plated, screwed down high pressure, with or without lettered\"Hot\" or \"Cold\"with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore. |
| 100 | S&F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia all as directed. |
| 101 | S&F in repairs 125mm dia, chromium plated shower rose with or without swivel joints,including fixing to steelpipe or ounion of 15mm bore all as directed. |
| 102 | S&F in repair of PVC low level flushing cistern dual flush top push,10 Ltr capacity symphonic action type white as approved, ball valve float valve and handle, flush pipe incl CP bracket |
| 103 | S&F in repairs PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified and directed. |
| 104 | S&F in repairs 600x450 mm size of 5.5mm thickness looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed. |
| 105 | S&F in repairs for 15mm dia of pipe Anglevalves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed . |
| 106 | S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms). |
| 107 | S&F in repairs 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screwscomplete all as specified. |
| 108 | S&F PVC Shelves of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms) |
| 109 | S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed. |
| 110 | S&F in repairs CP wall mixer (3 in 1) 15mm bore. complete all as specified and direcated and as approved by GE. |
| 111 | S&F in repairs CP Central hole basin mixer fancy type 15mm dia all as specified and directed. |
| 112 | S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white withfront or back inlet with integral \"foot rests including provn of lime concrete bedding including connections to \"flushing cistern/pipe complete all as specified and directed including 100mm CI \"P\" trap. |
| 113 | S&F in repairs CP toilet paper holder as approved by GE. |
| 114 | S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as directed. |
| 115 | S&F in repairs fancy type looking mirror with Aluminium/PVC moulding of size 400x550x5mm thick as approved by GE. |
| 116 | S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm |
| 117 | S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) |
| 118 | S&F in repairs in repairs peg set of six cromium plated MS sheet :including fixing screw Make : Prayag |
| 119 | S&F magnet Catcher for cub board complete all as specified and directed. |
| 120 | S&F in repairs corner glass shelf assembly 250mm radius made of 6mm thick craaylic glass, with CP railing, fixed with suitable rowal plug & screws complete all as specified and directed. |
| 121 | All as per item No. 120 here in beforebut glass shelf assembly 300 mm radius. |
| 122 | S&F plastic water closet seat cover, black closed pattern with flat bottom and cover and MS chromium plated or aluminium hanging device ,fixed in repair,complete all as specified and directed. |
| 123 | S&F PVC waste pipe, 32mm bore, 750mm long for basin, fixed in repair,complete all as specified anddirected. |
| 124 | S & F bottle trap 32 mm dia of PTMT having Min water seal of 25mm Min wt 260- gms complete all as specified and as directed. |
| 125 | S & F waste coupling of PTMT (half or full threaded) 32 mm dia ,complete all as specified and as directed. |
| 126 | Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified |
| 127 | M&L 10 mm thick ceiling plaster in CM (1:4) on fair faces of concrete surfaces. |
| 128 | M & L rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound @ 3% by wt of cement finished fair faces of brick/concrete surfaces even and fair without using extra cement . The work will be carried out upto tripple storey building the rate of scafolding is included for this item also. WPC will be measured and paid separately. |
| 129 | M&L rendering 10mm in CM 1:4 mixed with water proofing compound @ 3% by wt of cement onbalcony, facia, roof projection and chajja etc. The work will be carried out upto tripple storey building the rate of scafolding is included for this item also. WPC will be measured and paid separately. |
| 130 | M & L rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete work even and smooth without using extra cement. |
| 131 | Supply only integral water proofing compound ( ISI marked ) |
| 132 | M&L for preparation of new plastered surfaces and applying two coats ofoil bound distemper of approved shade/tint over a coat of primer on wallsall as specified & directed by Engineer-in-Charge |
| 133 | All as per item No 132.00above but on ceilings . |
| 134 | M&L preparation of newly plastered surface of any description and applying two coat of plastic emulsion paint complete all as specified and as directed. |
| 135 | M&L for preparation of new plastered surfaces and applying two coats ofcement base paint of approved shade on walls all as specified & directedby Engineer-in-Charge.The work will be carried out upto tripple storey building and the rate of scafolding is included for this item also. |
| 136 | M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with steel wire brushing and applying one coat of white wash on wall complete all as specified & directed . White washing shall be carried out using DDL.The work will be carried out upto tripplestorey building the rate of scafolding is included for this item also. |
| 137 | All as per item No. 136.00 above but on ceiling |
| 138 | M&L preparation old plastered surfaces of wall and applying one coat oil bound distemper on walls complete all as specified & directed. |
| 139 | All as per item No. 148.00 above but on ceiling |
| 140 | Preparation of olddecorated plastered surface of any description and applying one coat of plastic emulsion paint complete all as specified and as directed. |
| 141 | M&L for preparation of old plastered or unplastered surfaces of external wall by brooming down with steel wire brushing and applying one coat of cement base paint on external wall surfaces complete all as specified & directed.The work will be carried out upto tripplestorey building the rate of scafolding is included for this item also. |
| 142 | Complete removal of exisitng treatment on walls all as specified and as directed. |
| 143 | All as per item No. 142.00 above but on ceiling |
| 144 | M&L for prepration of old decorated surfaces and applying two coats of white wash on walls, fins, facia. Chajja etc , complete all as specified and as directed. |
| 145 | All as per item No. 144.00 above but on ceiling |
| 146 | M/L for 2 mmthick Birla white putty/JK white wall care putty on walls. |
| 147 | M&L for preparation of old plastered surfaces of walls and applying two coats ofdistemper oil emulsion of approved tint all as specified . |
| 148 | All as per item No 147.00 above but on ceilings . |
| 149 | Complete removal of existing treatment on wall/roof projection including facia,cormices etc by scrapping with mechancial sander (having mechincal vaccum mechanism) with sanding pad of approprite grit to make surface clean,free from dust,loose paint etc by skilled labour complete all as specified and directed. |
| 150 | M&L for waterproof cement based putty@ 1Kg (undiluted) per sq mtr of average thickness 1mm over the plastered/old painted wall after scraping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having vacuum mechanism) having RPM not less than 1500,sanding pad of 240 Grit or above to make the surface free from dust etc.by skilled labour as per following steps: Step1) Mix the putty powder by adding water as per manufacture instruction and mix it with putty mixer the mixing capacity of min 2.5 Kg putty per minute. Step2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed ofmax 6 ltrs per minuts with a maximumpressure 3300 PSI.Allow6-8 hrs time to dry the putty surface.Step (3(a) The work pertaining to periodical services&water proffing shall be executed from authrized application through manufacture of which the materials i.e. Paint,distemper,putty etc. is proposed to be used by the contractor and approved by Garrisin Engineer. (b) Cost of scafolding upto 10mm hight of bulding is including in this item.(c) Masking of window/doors during spary painting using polythine film will be included. (d) cleaning and clearing site of paint masts etc.included. |
| 151 | M&L for one coat acrylic water based exterior grade [email protected] (undiluted)/10sq mtr diluted with fully automatic airless spray machine of paint applaction with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete asas specified as directed.(Note (a) The work pertaining to periodical services&water proffing shall be executed from authorized applicator through manufacture of which the materials i.e Paint,Distemper,Putty etc. is proposed to be used by the contractor and approved by Garrision Engineer. (b) Cost of scafolding upto 10mm hight of bulding is enclosed in this item. (c) (Make: Asian,BERGER AND DULEX) |
| 152 | M&L for two coat water based premum acrylic smooth exteriror emulsion of approved colour with silicon additive&colour stay Technology,Excellent Drit Pick up resistence with low VOC less than 50 gram/ltrs as per LEEDS specification.Anti algal properties in two [email protected] ltr (unditluted)/10 sqm diluted with water as per automatic airless spray machine of paint applaction with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete asas specified as directed.(Note (a) The work pertaining to periodical services&water proffing shall be executed from authorized applicator through manufacture of which the materials i.e Paint,Distemper,Puuty etc. is proposed to be used by the contractor and approved by Garrision Engineer. (b) Cost of scafolding upto 10mm hight of bulding is enclosed in this item.(Make: Asian,BERGER AND DULEX) |
| 153 | M&L preparation of old plastered surfaces of walls of any description and applying two coat of plastic emulsion paint complete all as specified and as directed. |
| 154 | M&L for preparation of old painted steel surfaces over 10 cm width/girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 155 | M&L for preparation of old painted surfaces of wood over 10 cm width/girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 156 | M&L for preparation of old steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint. |
| 157 | M&L for preparation of old painted steel surfaces not exc. 10 cm width/girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 158 | M&L for preparation of old painted surfaces of wood not exc.10 cm width/girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 159 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. |
| 160 | M&L 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugationsside lap, fixedwithcoach screws and washers, in roofs, walls etc. with grade of zinc coating 275. |
| 161 | M&L 0.63 mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 |
| 162 | Prepration of old cemented surfaces and applying one coat of Teracotta all as specified and directed. |
| 163 | Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm highupto triple storey bldg.Rate for use of ladder/scaffolding included in this item. |
| 164 | Prepration of old painted surfaces of Brick, Stone, Concrete , Asbestos Cement or Plaster Surfaces and applying two coat of synthetic enamel paint all as specified and as directed. |
| 165 | Supply and fixing as in replacement stainless steel (conforming to AISI-304 grade) plate rack of overall size 750mm x 600mm x 254 mm or equivalent made of 1mm thick stainless steel sheetfixed on CP cantilever brackets, complete all as specified and as directed. Make : Jayna Cat No SBSD-05 or equivalent approved make. |
| 166 | S&F Sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 600 mm long |
| 167 | Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting&fixtures such as switches with board, ceiling roses, pendents, bell/buzzer, bell push, lamp holders, regulators, sockets, light fittingsetc. removing materials from site and making good to the disturbed surfaces of walls, ceiling floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed. |
| 168 | M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connecting to earth dolly, including PVC rectangular box for mounting switches/sockets/regulators etc. with 3mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed. Make: Richa/KEI/Polycab Make of caping/casing & PVC boxes: Prestoplast/finolex/Supreme/Richa |
| 169 | Onelight/Call bell point controlled by one, one way switch. |
| 170 | One Exh/Ceiling fan point controlled by one, one wayswitch. |
| 171 | One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 172 | One 3 pin socket outlet 5 Amps on the Independent board. |
| 173 | All as per item No 168.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. |
| 174 | M&L for Switch Piano, flush type single pole, one way 5 Amps complete all as specified and directed.Make:-Anchor/Legrand/Kinjal |
| 175 | M&L for Socket outlet, 2 in 1, 3 pin 5A flush typeMake:- Havells/Legrand/Anchor |
| 176 | M&L for Switch Socket combination, 2 in 1, 5 pin 5A flush typeMake:- Havells/Legrand/Anchor |
| 177 | M&L Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type Make:- Havells/Legrand/Anchor |
| 178 | M&L for stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet etc.Make:- Havells/Legrand/Achor |
| 179 | M&L forceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed.Make:-Anchor/Legrand/Kinjal |
| 180 | M&L for replacement of Bell AC 230 volts musical type.Make:-Anchor/Legrand/Kinjal |
| 181 | M&L for replacement of bell push switch 5 amps piano type flush type Make:-Anchor/Legrand/Kinjal |
| 182 | M&L for 20 Watt LED, 4\", Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed.Make : Havells/Bajaj/Philips/CG |
| 183 | Repair/Replacement for 20 Watt LED, 4\", Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed.Make : Havells/Bajaj/Philips/CG |
| 184 | M&L for 10 Watt LED, 2\", Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed.Make : Havells/Bajaj/Philips/CG |
| 185 | Repair/Replacement for 20 Watt LED 4\" Tube with single/Double side connection suitable for batten light fitting incl taking down complete all as specified and directedMake : Havells/Bajaj/Philips/CG |
| 186 | Repair/Replacement for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings incl taking down old unsv light fitting. Make : Anchor/legrand/Havells make LED lamp :Havells/Bajaj/CG |
| 187 | Repair/Replacement for piano switch single pole 5A, one way complete all as specified and as directed Make : Anchor/Legrand/Havells |
| 188 | Repair/Replacement for switch socket combination 6 Amps 5 pin , 230 volt flush type complete all as specified anddirected Make : Anchor/Legrand/Havells |
| 189 | Repair/Replacement for switch socket combination 16 Amps 5 pin230 volt flush type complete all ascomplete all as specified and directed Make : Anchor/Legrand/Havells |
| 190 | Repair/Replacement for socket outlet 5 pin 6A, 230 volt flush type complete all as specified and directed Make : Anchor/Legrand/Havells |
| 191 | Repair/Replacement for fan regulator 100/120 watt step type AC 220 volt complete as complete all as specified and as directed Make : Anchor/Legrand/Havells |
| 192 | Repair/Replacement for Modular Switch 1 way 6A,1 moduleMake:-Anchor/Legrand/Havells |
| 193 | Repair/Replacement for modular switch 1 way 16A, 1 module Make:-Anchor/Legrand/Havells |
| 194 | Repair/Replacement for Modular Socket ,6A/2/3 pin combined 2 moduleMake:-Anchor/Legrand/Havells |
| 195 | Repair/Replacement Modular Socket ,6A/16A-2/3 pin combined 2 module Make:-Anchor/Legrand/Havells |
| 196 | Repair/Replacement ModularBell push 1 Way 6A 1 module Make:-Anchor/Legrand/Havells |
| 197 | Repair/Replacement Modular stepped type electronic fan regulator 120 Watt socket size flush type on the existing phenolic laminated sheet etc.Make:-Anchor/Legrand/Havells |
| 198 | Repair/Replacement for Lamp holder(Penta, Batten,Angle Type) PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 199 | Supply and fixing for PVC switch board 8\" x 6\" suitable for switch socket complete all as specified and directedMake : Richa/ ABB/ Presto Plast |
| 200 | All as per item No 195.00 PVC switch board 7\"x4\" Make : Richa/ ABB/ Presto Plast |
| 201 | All as per item No 195.00 PVC switch board 4\" x 4\"Make : Richa/ ABB/ Presto Plast |
| 202 | Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Richa/Finolex/Havells/RR KabelMake of caping/casing :- Prestoplast/Finolex/supreme |
| 203 | M&L for replacement of 20 Watt LED security light fitting, drawn through including connecting up to from ceiling rose to the light fittingincl taking down old unsv light fitting complete all as specified and directed.Make :Havells/Bajaj/CG/Philips |
| 204 | M&L for decorative wall light fixture made up of polycarbonate including 9 watt LED lampwith B-22 base including taking down old UNSV complete all as specified and directed.Make : CG/Bajaj/Havells Cat No LHDL06160099 |
| 205 | M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacityincluding taking down old unsv MCB DBs complete all as specified and as directed.Make:- Legrand/ ABB/Siemens |
| 206 | All as per item No 201.00 above but SPN 4 Way complete all as specified and as directed.Make:- Legrand/ABB/Siemens |
| 207 | All as per item No 201.00 above but SPN 2 Way complete all as specified and as directed.Make:-Legrand/ABB/Siemens |
| 208 | Supply and fixing MCB TPN 40 to 100 Amps415V 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and Commissioningincl taking down old unsv MCB complete all as specified and as directed. Make : Legrand/ABB/Siemens |
| 209 | M&L for Replacement ofMCB SPN 32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioningincl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand/ABB/Siemens |
| 210 | M&L for Replacement of MCB SP 6-32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning incl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand/ABB/Siemens |
| 211 | M&L for 1.5 Sqmm wire x 2 Core PVC insulated sheathed copper flexible cable as per IS 694 Complete all as specified and directed.Make : Finolex/Richa/Havells |
| 212 | All as item No 207.00 above but in 2.5 Sqmm 2 core complete all as specified and directed.Make : Finolex/Richa/Havells |
| 213 | M&L for replacement of PVC casting & caping 25 x 12 mm complete all specified and as directed Make : Presto plast/Supreme/Richa |
| 214 | All as per item No 209.00 above but in 32 x 12 mm.Make : Presto plast/Supreme/Richa |
| 215 | Supply and fixing for flexible pipe size 20 mm (Colour : White/ Grey) |
| 216 | Supply and fixing for flexible pipe size 25 mm (Colour : White/ Grey) |
| 217 | M&L for hylem Sheet 10 x 8 inch switch board sheet complete all as specified and as directed. |
| 218 | All as per item No 213.00 but above 8 x 6 inch. |
| 219 | All as per item No 213.00 but above 7 x 4 inch. |
| 220 | All as per item No 213.00 but above 4 x 4 inch. |
AI Tender Summary
Tender Timeline
Jul 05, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 19, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 21, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender