Providing Electrical .Installation . In 10 Nos Staff Quarters At Santipur Phc
Tender Value
10.04 Lakhs
Estimated cost
Bid Submission
18 Jul 2022
0 days left
EMD
20085
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kumarghat → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Electrical .Installation . In 10 Nos Staff Quarters At Santipur Phc
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with wooden switch board with bakelite cover and piano type switch including connection etc as required. |
| 2 | Short Point |
| 3 | Medium Point |
| 4 | Long Point |
| 5 | Providing and fixing of 3 pin 5/6 amps plug point withpianotype 5/6ampsswitch andsocketincludingconnectionwith 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) onswitch board, earthing the 3rd pin etc. as required: |
| 6 | Providing and fixing of 3/6 pin15/16 amps plug point withpianotype 15/16ampsswitch andsocketincludingconnectionwith 2x2.5 sq. mm PVC insulated Copper conductor cable (FR) onswitch board, earthing the 3rd pin etc. as required:- |
| 7 | Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required. |
| 8 | 2x1.5 sq.mm: |
| 9 | 2x2.5 sq.mm: |
| 10 | 2x4 sq.mm: |
| 11 | 2x6 sq.mm: |
| 12 | Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/surface including connection etc. as required:- |
| 13 | 1x1.5 sq.mm: |
| 14 | 1x2.5 sq.mm: |
| 15 | Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12\"x 12\" having locking arrangement including CC work, holes on earth pipe etc. as required. |
| 16 | Extra for using salt (5 kg) and charcoal (46kg) for pipe earth electrode as required. |
| 17 | Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required. |
| 18 | Providng and laying 15mm dia(medium gauge) G.I. pipe for drawing of4.06mm (8SWG) dia G.I./ Copper wire forearth connection from earth electrodes etc as required. |
| 19 | Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick i/c accessories and providing masonry enclosure withCIcover plate Size 12\"x 12\" having locking arrangement, alongwith20 mm dia (medium gauge) watering pipe including CC work etc as required. |
| 20 | Extra for using salt (12 kg) and charcoal (96kg) for plate earth electrode as required. |
| 21 | Supply and fixing of 25mm x 5mm GI strip on wall/ floor of the building for horizontal/ vertical run including necessary spacers and porcelain insulators at regular intervals. |
| 22 | Supply and fixing of 32mm x 6 mm GI strip on walls/ floor of the building for horizontal/ vertical run including necessary spacers and porcelain insulators at regular intervals. |
| 23 | Supply and fixing of the following sizes GIprongwith necessary nuts & bolts etc as required grouted on roof for Lightning protection. |
| 24 | G.I Prong 450 mm long |
| 25 | Supplying and fixing of the following ratings switch disconnector fuse unit(main switch)made of sheet steel enclosure with all accessories including drilling holes on the board/MS clamp and necessary connection etc. as required. |
| 26 | 32 amps 240 volts DP (rewireable) |
| 27 | Supplying and fixing of powder coated sheet steel enclosure on surface/recess, suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connectionas required. |
| 28 | 4 way MCB DB (single door). |
| 29 | (2+6) / 8way SPN MCB DB (single door). |
| 30 | Supplying & fixing of following ratings MCBB/C curve having breaking capacity10 KA in the existing MCB DB including connectionas required. |
| 31 | 6 to 32 amps SP MCB. |
| 32 | Supplying and fixing of MS frame made of (25 x 25 x 5)mm MS angle with necessary support by (40 x 6)mm MS flat and 10 mm thick boiled plywood on top, grouted on wall with 4 nosleg(25x25x5mm MS angle20 cm long) finishedwith red oxide and 2 coat synthetic enamel paintincluding necessary cc work, mending the damages & painting etc as required. |
| 33 | Supplying and fixing of following luminaries complete withnecessary accessories and connection etc. as required (Commercial lighting fixtures with 50,000 burning hours). |
| 34 | Box type single FTL fittings of CRCA steel sheet housing complete with 36/40 W FTL,electronic ballast and high quality reflector cover. |
| 35 | Decorative wall mounting fancy bracket light fixture suitable for GLS or retrofit CFL/LED (without lamp) |
| 36 | Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc.as required (with 50000 burning hours and minimum lumen output of 100 lm/watt) |
| 37 | Surface mounted round/Square shaped 12 watt LED downlight with integral driver and high quality polycarbonate diffuser. |
| 38 | 5 watt LED retrofit lamp with polycarbonate body and aluminium heatsink. |
| 39 | Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):- |
| 40 | 45 watt LED street light fixture with integral driver and secondary lens (IP 66). |
| 41 | Supplying & fixing of G.I. pipe (medium gauge) bracket fabricated at suitable angle for fixing of outdoor light on wall/ RCC base with necessary MS clamp, nut, bolt etc as required. |
| 42 | 50 mm dia. |
| 43 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required. |
| 44 | Musical call bell. |
| 45 | Electronic 5 step fan regulator. |
| 46 | 32 amps DP kit kat switch. |
| 47 | Supplying & fixing of 1200 mm sweep white color AC ceilingfan capacitor typedouble ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR)(ISI marked, BEE 1star/minimum service value 4.0 m3/min/W) |
| 48 | Supplying & installation of 300 mm sweep metalic body exhaust fan including connection etc as required. |
| 49 | Supplying & installation of 300 mm sweep 900 rpm metalic body exhaust fan including connection etc as required (ISI marked) |
| 50 | Supplying & installation of shutter for 225/230/300 mm sweep metalic body exhaust fan in the existing hole as required. |
| 51 | Making different sizes of hole in the wall for fixing of exhaust fan including finishing the same with cement plastering and painting etc as required: |
| 52 | Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required. |
| 53 | 3 core4 Sq mm |
| 54 | Excavation of earth for cable trench of 800mm depth & 300mm width in all kinds of soil including back filling of cable trench with the excavated soil with 20cm layer of sand, 3.5 nos bricks per metre for protection including ramming, consolidating to the original shape as per dirrection of Site Engineer . |
| 55 | Drawing of armoured/un-armoured cable with proper saddling etc as required. |
| 56 | Supplying & installation of Astronomical timer Switch including necessary connection etc as required |
| 57 | Supplying & installation of following power contactors including necessary connection etc as required |
| 58 | 3 pole 9 amps (AC3)power contactors with 1NO+1NC Aux. Contact. |
| 59 | Supplying of 25 cm long ‘L’ hook made with 40mm x 6mm MS flat and fixing with necessary fasten nuts including finishing, painting etc as required. |
AI Tender Summary
Tender Timeline
Jul 04, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 19, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender