Agriculture Cooperative Closing in 0 days TDR #32937119

Purchase Of Instrumentation Spares Purchase Of Instrumentation Spares , Instrumentation Spares , Microprocessor Based Digital Scanner Input - Universal, 16 Channelpower Supply - 230 Vacsize - 48 X 96 Model – 85Xx+Note - This Scanner Have Provision For

Issued by Cooperative · Rohtak, Haryana
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Jul 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
100
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Rohtak → Haryana
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Purchase Of Instrumentation Spares Purchase Of Instrumentation Spares , Instrumentation Spares , Microprocessor Based Digital Scanner Input - Universal, 16 Channelpower Supply - 230 Vacsize - 48 X 96 Model – 85Xx+Note - This Scanner Have Provision For Individual Calibration Mode For Each Channel And For Same Input. , Digital Rpm Indicator, Model - Rp4d5, I / P - Proximity Sensor Pnp - No, O / P - 4 To 20 Ma, P.S. - 220 Vac , Digital Rpm Indicator, Model – Rsx4-P, I / P - Proximity Sensor Pnp - No, P.S. - 220 Vac , Signal Isolator I / P – 4 To 20 Ma, O / P – 0 To 10 Vdc Dual P.S. – 220 Vac , Signal Isolator I / P – 0 To 10 Vdc O / P – 4 To 20 Ma Dual P.S. – 220 Vac , Signal Isolator I / P – 4 To 20 Ma, O / P – 4 To 20 Ma Dual Out Put P.S. – 220 Vac 24 Vtps , Signal Isolator I / P – 0To 5 Amp, O / P – 4 To 20 Ma, R Max – 750 O P.S. – 220 Vac, 50 Hz , Donnelly Chute Level Sensor With Mounting Bracket & Screws Accessories, Capacitive Type, Non Contact Type, Output - Digital Output 24 Vdc, Range - 15 Mm. , Microprocessor Based Digital Flow Indicator Totalizer, Model – 1008 I / P – 4 To 20 Ma O / P – 4 To 20 Ma, 24 Vdc P.S.- 220 Vac. Size – 96 X 96 Mm2 , Ups Battery Type Ep 26 – 12 12 V, 26 Ah , Proximity Sensor Pnp - No, Model - 18D Flash / Nf, Sensing Range - 5 / 8 Mm, Volt - 10 To 40 Vdc, Max. Load - 300 Ma. , Electronic Hooter Dlh-Ea10 , Hmi Panel View 800 Hmi Terminal 7” Mat No. Pn-263069, Dir / Ver 10001025763 / 10 Cat 2711R-T7t, Ser A , Circular Chart Recorder With 200 Nos. Chart & 50 Nos. Pens. Ps – 220 Vac I / P – Universal 24 Vtps O / P – 4 To 20 Ma Dc , Filter Regulator Lubricator Modular ( Frlm ) With Pressure Gauge. Connection – ¼”, Range – 0 To 7 Kg / Cm2 , Air Filter Regulator With Pressure Gauge, Connection – ¼”, Range – 0 To 7 Kg / Cm2 , Stem Type Temperature Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Connection Thread 1 / 2 Bsp, Dial Size - 6, Sensor Dia - 9 Mm, Sensor Length - 12, Sensor Bulb Type, Sensor Bulb Dia - 10 Mm, Range - 0 To 200°C. , Stem Type Temperature Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Connection Thread 1 / 2 Bsp, Dial Size - 6, Sensor Dia - 9 Mm, Sensor Length - 12, Sensor Bulb Type, Sensor Bulb Dia - 10 Mm, Range - 0 To 600°C. , Stem Type Temperature Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Connection Thread 1 / 2 Bsp, Dial Size - 6, Sensor Dia - 9 Mm, Sensor Length - 12, Sensor Bulb Type, Sensor Bulb Dia - 10 Mm, Range - 0 To 400°C , Capillary Type Temperature Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Connection Thread 1 / 2 Bsp, Dial Size - 6, Sensor Dia - 9 Mm, Sensor Length - 12, Sensor Bulb Type, Sensor Bulb Dia - 10 Mm, Capillary Length – 3 Mtr, Range - 0 To 600°C , Pressure Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Bottom End Connection, Connection Thread – 1 / 2 Bsp, Dial Size - 4Range - 0 To 4 Kg / Cm² , Pressure Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Back Mounting Connection, Connection Thread – 1 / 2 Bsp, Dial Size - 4Range - 0 To 2.5 Kg / Cm² , Pressure Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Bottom End Connection, Connection Thread –3 / 8 Bsp, Dial Size - 6Range - 0 To 7 Kg / Cm² , Pressure Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Bottom End Connection, Connection Thread – 3 / 8 Bsp, Dial Size - 6Range - 0 To 10 Kg / Cm² , Pressure Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Bottom End Connection, Connection Thread – 1 / 2 Bsp, Dial Size - 6Range - 0 To 2.5 Kg / Cm² , Thermocouple For Furnace Temperature With Thermo Well, Type - Mineral Insulated Charomel - Alumel, Type - K Thermocouple With Inner Sheath Of Inconnel - 800 Duplex, Outer Sheath Ansi 310 Outer Dia - 22 Mm Approx, Inner Sheath - Inconnel 800, Inner Sheath Dia 8 Mm, Sensor Wire Dia - 2.5 Mm², Head Die Length- 1000 Mm , K ( Charomel / Alumel ) Type Thermocouple With Thermo Well. Duplex Type With Insulation Ceramic Bends Outer Sheath Of Ss-316, Sensor Dia – 9 Mm, Sensor Length – 12”, Connection – ½” Bsp, Range – 0 To 6000C, Thermo Well Id – 12 Mm, Od – 20 Mm, Length – 15”, Thermo Well Material – Ss316 , Load Cell 110 Kg. , Spare Kit For Coarse Feed Cylinder Size - 1½ X 100 Mm , Spare Kit For Fine Feed Cylinder Size - 1½ X 100 Mm , Spare Kit For Load Bucket ( Discharge ) Cylinder Size - 1½ X 200 Mm , Spare Kit For Bag Clamp Cylinder Size - 3 X 100 Mm , Leather Belt For Bag Clamp , 5 Port Solenoid Valve , Smps, 24 Vdc, 6 Amp. , Air Drier Controller , Solenoid Valve With Solenoid Coil, 3 / 2 Nc, Model – Em612a, Max. Press. 10 Bar, Nw – 2, Volt. 220 Vac. , L - Connector Push Pull Type Size - 1 / 4 X 6 Mm , Straight Connector Push Pull Type Size - 1 / 4 X 6 Mm , Tee Connector Push Pull Type Size - 1 / 4 X 6 Mm , Flow Control Valve Size - 1 / 4 X 6 Mm , Pvc Pipe, Id - 6 Mm, Od - 8 Mm, Max. Air Pressure - 10 Bar, Blue Clour

BOQ

Name of Work: Instrumentation spares
Sl. No. Item Description
1Instrumentation spares
2Microprocessor based digital scanner Input - Universal, 16 channelPower supply - 230 VACsize - 48 x 96Model – 85XX+Note - This scanner have provision for individual calibration mode for each channel and for same input.
3Digital rpm indicator, model - RP4D5, I/P - proximity sensor PNP - NO, O/P - 4 to 20 mA, P.S. - 220 VAC
4Digital rpm indicator, model – RSX4-P, I/P - proximity sensor PNP - NO,P.S. - 220 VAC
5Signal IsolatorI/P – 4 to 20 mA,O/P – 0 to 10 VDC dualP.S. – 220 VAC
6Signal IsolatorI/P – 0 to 10 VDCO/P – 4 to 20 mA dualP.S. – 220 VAC
7Signal IsolatorI/P – 4 to 20 mA,O/P – 4 to 20 mA Dual out putP.S. – 220 VAC 24 VTPS
8Signal IsolatorI/P – 0to 5 Amp,O/P – 4 to 20 mA, R max – 750 ? P.S. – 220 VAC, 50 Hz
9Donnelly chute level sensor with mounting bracket & screws accessories, capacitive type, non contact type, Output - Digital output 24 VDC, range - 15 mm.
10Microprocessor based digital flow indicator totalizer, model – 1008I/P – 4 to 20 mAO/P – 4 to 20 mA, 24 VDCP.S.- 220 VAC. Size – 96 x 96 mm2
11UPS BatteryType EP 26 – 1212 V, 26 Ah
12Proximity sensor PNP - NO, Model - 18D flash/NF, Sensing range - 5/8 mm, Volt - 10 to 40 VDC, Max. Load - 300 mA.
13Electronic HooterDLH-EA10
14HMIPanel view 800 HMI Terminal 7”MAT No. PN-263069, DIR/ VER 10001025763/10CAT 2711R-T7T, SER A
15Circular chart recorder with 200 nos. chart & 50 nos. pens.PS – 220 VACI/P – Universal24 VTPSO/P – 4 to 20 mA DC
16Filter Regulator Lubricator Modular( FRLM) with pressure gauge.Connection – ¼”, Range – 0 to 7 kg/ cm2
17Air Filter Regulator with pressure gauge, Connection – ¼”, Range – 0 to 7 kg/ cm2
18Stem type temperature gauges, complete SS body, SS bourdon tube & SS mechanism, connection thread 1/2\" BSP, Dial size - 6\", sensor dia - 9 mm, sensor length - 12\", sensor bulb type, sensor bulb dia - 10 mm, Range - 0 to 200°C.
19Stem type temperature gauges, complete SS body, SS bourdon tube & SS mechanism, connection thread 1/2\" BSP, Dial size - 6\", sensor dia - 9 mm, sensor length - 12\", sensor bulb type, sensor bulb dia - 10 mm, Range - 0 to 600°C.
20Stem type temperature gauges, complete SS body, SS bourdon tube & SS mechanism, connection thread 1/2\" BSP, Dial size - 6\", sensor dia - 9 mm, sensor length - 12\", sensor bulb type, sensor bulb dia - 10 mm, Range - 0 to 400°C
21Capillary type temperature gauges, complete SS body, SS bourdon tube & SS mechanism, connection thread 1/2\" BSP, Dial size - 6\", sensor dia - 9 mm, sensor length - 12\", sensor bulb type, sensor bulb dia - 10 mm, Capillary length – 3 mtr, Range - 0 to 600°C
22Pressure gauges, complete SS body, SS bourdon tube & SS mechanism, Bottom end connection,connection thread – 1/2\" BSP, dial size - 4\"Range - 0 to 4 kg/cm²
23Pressure gauges, complete SS body, SS bourdon tube & SS mechanism, Back mounting connection,connection thread – 1/2\" BSP, dial size - 4\"Range - 0 to 2.5 kg/cm²
24Pressure gauges, complete SS body, SS bourdon tube & SS mechanism, Bottom end connection,connection thread –3/8\" BSP, dial size - 6\"Range - 0 to 7 kg/cm²
25Pressure gauges, complete SS body, SS bourdon tube & SS mechanism, Bottom end connection,connection thread – 3/8\" BSP, dial size - 6\"Range - 0 to 10 kg/cm²
26Pressure gauges, complete SS body, SS bourdon tube & SS mechanism, Bottom end connection,connection thread – 1/2\" BSP, dial size - 6\"Range - 0 to 2.5 kg/cm²
27Thermocouple for furnace temperature with thermo well, Type - mineral Insulated Charomel - Alumel, Type - K thermocouple with inner sheath of inconnel - 800 Duplex, Outer sheath ANSI 310 outer dia - 22 mm approx, Inner sheath - inconnel 800, Inner sheath dia 8 mm, Sensor wire dia - 2.5 mm², Head die length- 1000 mm
28K (Charomel/ Alumel) type thermocouple with thermo well. Duplex type with insulation ceramic bends outer sheath of SS-316, sensor dia – 9 mm, sensor length – 12”, connection – ½” BSP, Range – 0 to 6000C, Thermo well ID – 12 mm, OD – 20 mm, Length – 15”, Thermo well material – SS316
29Load Cell 110 kg.
30Spare kit for coarse feed cylinder size - 1½\" x 100 mm
31Spare kit for fine feed cylinder size - 1½\" x 100 mm
32Spare kit for load bucket (Discharge) cylinder size - 1½\" x 200 mm
33Spare kit for Bag clamp cylinder size - 3\" x 100 mm
34Leather belt for bag clamp
355 port solenoid valve
36SMPS, 24 VDC, 6 Amp.
37Air Drier Controller
38Solenoid valve with solenoid coil, 3/2 NC, model – EM612A, max. press. 10 bar, NW – 2, Volt. 220 VAC.
39L - connector push pull type size - 1/4\" x 6 mm
40Straight connector push pull type size - 1/4\" x 6 mm
41Tee connector push pull type size - 1/4\" x 6 mm
42Flow control valve size - 1/4\" x 6 mm
43PVC pipe, ID - 6 mm, OD - 8 mm, Max. air pressure - 10 Bar, Blue clour

AI Tender Summary

OUR REF NO 32937119
AUTHORITY Cooperative
TENDER VALUE Ref. Documents
LAST DATE 12-07-2022
Authority
Authority Name Meham Cooperative Sugar Mills Limited
Work Description Purchase Of Instrumentation Spares Purchase Of Instrumentation Spares , Instrumentation Spares , Microprocessor Based Digital Scanner Input - Universal, 16 Channelpower Supply - 230 Vacsize - 48 X 96 Model – 85Xx+Note - This Scanner Have Provision For Individual Calibration Mode For Each Channel And For Same Input. , Digital Rpm Indicator, Model - Rp4d5, I / P - Proximity Sensor Pnp - No, O / P - 4 To 20 Ma, P.S. - 220 Vac , Digital Rpm Indicator, Model – Rsx4-P, I / P - Proximity Sensor Pnp - No, P.S. - 220 Vac , Signal Isolator I / P – 4 To 20 Ma, O / P – 0 To 10 Vdc Dual P.S. – 220 Vac , Signal Isolator I / P – 0 To 10 Vdc O / P – 4 To 20 Ma Dual P.S. – 220 Vac , Signal Isolator I / P – 4 To 20 Ma, O / P – 4 To 20 Ma Dual Out Put P.S. – 220 Vac 24 Vtps , Signal Isolator I / P – 0To 5 Amp, O / P – 4 To 20 Ma, R Max – 750 O P.S. – 220 Vac, 50 Hz , Donnelly Chute Level Sensor With Mounting Bracket & Screws Accessories, Capacitive Type, Non Contact Type, Output - Digital Output 24 Vdc, Range - 15 Mm. , Microprocessor Based Digital Flow Indicator Totalizer, Model – 1008 I / P – 4 To 20 Ma O / P – 4 To 20 Ma, 24 Vdc P.S.- 220 Vac. Size – 96 X 96 Mm2 , Ups Battery Type Ep 26 – 12 12 V, 26 Ah , Proximity Sensor Pnp - No, Model - 18D Flash / Nf, Sensing Range - 5 / 8 Mm, Volt - 10 To 40 Vdc, Max. Load - 300 Ma. , Electronic Hooter Dlh-Ea10 , Hmi Panel View 800 Hmi Terminal 7” Mat No. Pn-263069, Dir / Ver 10001025763 / 10 Cat 2711R-T7t, Ser A , Circular Chart Recorder With 200 Nos. Chart & 50 Nos. Pens. Ps – 220 Vac I / P – Universal 24 Vtps O / P – 4 To 20 Ma Dc , Filter Regulator Lubricator Modular ( Frlm ) With Pressure Gauge. Connection – ¼”, Range – 0 To 7 Kg / Cm2 , Air Filter Regulator With Pressure Gauge, Connection – ¼”, Range – 0 To 7 Kg / Cm2 , Stem Type Temperature Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Connection Thread 1 / 2 Bsp, Dial Size - 6, Sensor Dia - 9 Mm, Sensor Length - 12, Sensor Bulb Type, Sensor Bulb Dia - 10 Mm, Range - 0 To 200°C. , Stem Type Temperature Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Connection Thread 1 / 2 Bsp, Dial Size - 6, Sensor Dia - 9 Mm, Sensor Length - 12, Sensor Bulb Type, Sensor Bulb Dia - 10 Mm, Range - 0 To 600°C. , Stem Type Temperature Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Connection Thread 1 / 2 Bsp, Dial Size - 6, Sensor Dia - 9 Mm, Sensor Length - 12, Sensor Bulb Type, Sensor Bulb Dia - 10 Mm, Range - 0 To 400°C , Capillary Type Temperature Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Connection Thread 1 / 2 Bsp, Dial Size - 6, Sensor Dia - 9 Mm, Sensor Length - 12, Sensor Bulb Type, Sensor Bulb Dia - 10 Mm, Capillary Length – 3 Mtr, Range - 0 To 600°C , Pressure Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Bottom End Connection, Connection Thread – 1 / 2 Bsp, Dial Size - 4Range - 0 To 4 Kg / Cm² , Pressure Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Back Mounting Connection, Connection Thread – 1 / 2 Bsp, Dial Size - 4Range - 0 To 2.5 Kg / Cm² , Pressure Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Bottom End Connection, Connection Thread –3 / 8 Bsp, Dial Size - 6Range - 0 To 7 Kg / Cm² , Pressure Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Bottom End Connection, Connection Thread – 3 / 8 Bsp, Dial Size - 6Range - 0 To 10 Kg / Cm² , Pressure Gauges, Complete Ss Body, Ss Bourdon Tube & Ss Mechanism, Bottom End Connection, Connection Thread – 1 / 2 Bsp, Dial Size - 6Range - 0 To 2.5 Kg / Cm² , Thermocouple For Furnace Temperature With Thermo Well, Type - Mineral Insulated Charomel - Alumel, Type - K Thermocouple With Inner Sheath Of Inconnel - 800 Duplex, Outer Sheath Ansi 310 Outer Dia - 22 Mm Approx, Inner Sheath - Inconnel 800, Inner Sheath Dia 8 Mm, Sensor Wire Dia - 2.5 Mm², Head Die Length- 1000 Mm , K ( Charomel / Alumel ) Type Thermocouple With Thermo Well. Duplex Type With Insulation Ceramic Bends Outer Sheath Of Ss-316, Sensor Dia – 9 Mm, Sensor Length – 12”, Connection – ½” Bsp, Range – 0 To 6000C, Thermo Well Id – 12 Mm, Od – 20 Mm, Length – 15”, Thermo Well Material – Ss316 , Load Cell 110 Kg. , Spare Kit For Coarse Feed Cylinder Size - 1½ X 100 Mm , Spare Kit For Fine Feed Cylinder Size - 1½ X 100 Mm , Spare Kit For Load Bucket ( Discharge ) Cylinder Size - 1½ X 200 Mm , Spare Kit For Bag Clamp Cylinder Size - 3 X 100 Mm , Leather Belt For Bag Clamp , 5 Port Solenoid Valve , Smps, 24 Vdc, 6 Amp. , Air Drier Controller , Solenoid Valve With Solenoid Coil, 3 / 2 Nc, Model – Em612a, Max. Press. 10 Bar, Nw – 2, Volt. 220 Vac. , L - Connector Push Pull Type Size - 1 / 4 X 6 Mm , Straight Connector Push Pull Type Size - 1 / 4 X 6 Mm , Tee Connector Push Pull Type Size - 1 / 4 X 6 Mm , Flow Control Valve Size - 1 / 4 X 6 Mm , Pvc Pipe, Id - 6 Mm, Od - 8 Mm, Max. Air Pressure - 10 Bar, Blue Clour
Basic Detail
Tender No MSM/Pur./2022/257
Bidding Type Tender
Location
City Rohtak
State Haryana
Key Dates
Publish Date 04 Jul 2022
Submission Date 12 Jul 2022
Open Date 13 Jul 2022
Finance
Tender Value Ref. Documents
Tender Fee 100
EMD Ref. Documents
Exemption Not Available
Document List
dc5303a1-85bb-4e29-bd91-172387f3be88.html
BOQ_298677.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 04, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 12, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 13, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

dc5303a1-85bb-4e29-bd91-172387f3be88.html

xls

BOQ_298677.xls

pdf

Tendernotice_1.pdf

TenderDetail
Loading tenders