|
| 1 | Electric transformer 63KV at Simnania colony Poniwah |
| 2 | Supplyof 63 KVA (11/0.433 KV) 3-Phase dully Oil Filled Distribution Transformer (Level-2) |
| 3 | Loading & carriage from Divisional storesto site of installation, installation, testing & commisioing of 63 KVA (11/0.433 KV) 3-Phase dully Oil Filled Distribution Transformer (Level-2) |
| 4 | Supply, Erection, testing & commissioning of S.T Pole 9mtr Long SP-33 with base plate & cap for HT. Strictly as per REC standards |
| 5 | Supply , Erection, testing & commissioning of S.T Pole 8mtr Long SP-15 with base plate & cap for LT. Strictly as per REC standards |
| 6 | SupplyLaying, stringing, tensioning & binding of ACSR 30mmsq (weasel) Conductor |
| 7 | SupplyLaying, stringing, tensioning & binding of ACSR 50mmsq (Rabbit) Conductor |
| 8 | Providing & fixing of ISMC 75x40x6mm Channel iron cross arms for x-mer frame- 6Nos @16.5 kg each 8\" long and 100x50x6 mm 2NOs @22.5kg each 8\" including Nuts & Bolts |
| 9 | Supplying and erection of MS Channel “V’ cross-arm (75 x 40x6mm) with MS Angle Pole Top Bracket (50x50x6 mm) including back clamps of 50X8 mm for fixing V-Cross arm and pole top bracket without making holes in the ST pole as per REC standard for single pole [email protected] kg each |
| 10 | Supplying and fixing of pole Earthing Complete by GI Pipe 40 mm 2.5 mtr long through GI Strip(25x3 mm) to each HTand LT pole |
| 11 | Painting of poles with one coat of red oxide and two coats of Aluminium paint as per Standards. This also includes numbering of ploes with paint,submission of Pre and Post Execution photographs duly anthenticated by AEE concrened. |
| 12 | Supply,fixing, testing & commissioning of 11KV GO Set, AB Switch as per IS Standards |
| 13 | Supply,fixing, testing & commissioning of 11KV DO Fuse Set as per IS Standards |
| 14 | Supply,fixing, testing & commissioning of 11KV LA Set Gap less as per IS Standards |
| 15 | Supply,fixing, testing & commissioning of 11KV Pin Polymer Insulatorswith GI pins complete. |
| 16 | Cement bottoming 1:2:4 mix as per REC Standards 0.5cum/pole |
| 17 | Providing & fixing of LT Shackles Insulator with GI mukhi clamps including nuts & bolts |
| 18 | Supply, laying of 95 mmsq Single Core XLPE, FRLS unaroumed Cable |
| 19 | Providing & fixing of 11 kV polymeric composite disc insulator 12 kV , min failing load 45 kN, lighting impulse 75 kV positive and 80 kV negative, creepage distance 320mm |
| 20 | Supplying and fixing of 3 No. sub station earthingby GI Pipe 40 mm, 2.5 mtr long through GI Strip of 50X6 mm for neutral earthing and 25X3 mm for 2 transformer body earth, 1 no. LA Earth and 1 no. GO handle earth. (Note: For LA Earth 1 pipe shall have to be kept separate) |
| 21 | Providing and fixing of suitable sign board (1200x 600 mm) fabricated out of sheet steel indicating name of work, name of concerned (DDC,BDC or PRI Member),Estimated cost ,DOS and DOC. |
| 22 | Providing, Fixing of GI nuts and bolts for fixing of x-arms and other accessories. |
