Military Engineer Services-MES has published Repair To Toilets Flooring, Roof Sheet, Monkey Proofing And Misc Work At Af Stn Tughlakabad Under Ge ( Af ) Tughlakabad. Submission Date for this Tender is 27-07-2022. Toilet Bathroom Tenders in tughlakabad Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Jul-2022 | Corrigendum No 1 | Date | 20-07-2022 |
| 2 | 20-Jul-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-07-2022 |
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel galvalume sheet/valley gutter of any gauge, thickness, including Nainital or similar pattern roof coverings including ridges for north light truss, complete all as specified and directed by Engr-in-Charge. |
| 2 | S&F Pre-painted Galvalume Aluminium Zinc Coating GI Based plain sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in valley gutter / cladding to wall, fixed with self trapping screws all as specified and directed by Engr-in-Charge.Note: All joints to be sealed by silicon sealant to the satisfaction of Engr-in -Charge |
| 3 | M&L for mild steel, plain, black sheet 1.60 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screw, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitered angels etc, as required complete all as specified and directed by Engr-in-Charge. |
| 4 | S&F in roof as in horizontal/vertical/any position colour bond trapezoidal ribs of 28.5mm deep profile sheet of 1015mm effective cover width and nominal 28.5mm deep ribs with suitable square fluting in the five pans at nominal 203mm centre to centre manufacture out of nominal 0.5mm TCT (Total coated thickness) High Tensile steel with minimum 550 MPa yield strength metallic hot dip coated with aluminium-zinc alloy (55% aluminium, 45% zinc) as per IS-1397-Zincalume AZ 150 (Min 150 gms/Sqm total on both side) with super polyster colour bond XRW quality paint coat as per AS/N ZS 2728 including 50x5 mm thick mild steel flat as in wind tie with self tapping screws with PVC washer, complete all as specified and directed by Engr-in-Charge. Note : Mild steel flat of 50 x 5mm size shall be measured and paid separately under BOQ sl item No 26 as supply and fixed. Make : Tata Blue Scope/Lloyd insulation/ Interarch |
| 5 | All as per item No. 4.00 above but except sheet complete all as specified and directed by Engr-in-Charge. Note : Material obtained from Srl Item No. 1.00 here-in-before shall be used. |
| 6 | All as per item No. 4.00 above but as in north light ridges bended, shaped to match the existing pattern of roof ridges complete all as specified and directed by Engr-in-Charge. |
| 7 | All as per item No. 6.00 above but except sheets, complete all as specified and directed by Engr-in-Charge. Note : Material obtained from Srl Item No. 1.00 here-in-before shall be used. (Note forschedule item Nos 3.00 to 6.00: The contractor shall fill up holes/cracks with silicon sealant and joints shall be water tight to the entire satisfaction of Engineer-in-Charge.Cost of filling sealant shall be deemed to be included in unit rate quoted.) |
| 8 | Dismantling Wrought iron or mild steel work of any description not otherwise provided for like flat iron bracket for valley gutter, walk way on roof etc, complete all as specified and directed by Engr-in-Charge. |
| 9 | S&F Mild steel structural steel work conforming to Fe-410-W (Gde-E-250 quality-A) as in roof trusses (framed), trussed purlins of beam, tee, angle, channel or flat section including distance pieces cleats etc. and cutting to dead ends, notching, drilling, fitting , riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc. also for wedging truing up and fixing complete. Note :- All structural steel work shall be painted with one shop coat of zinc chromate primer including preparation of surfaces. |
| 10 | Dismantling expanded metal of any thickness or mesh, fixed with steel fillets of weight not exc 4 Kg per Sqm, complete all as specified and directed by Engr-in-Charge. |
| 11 | S&F mild steel framed brackets of angles tees flat iron square bars etc cut to shape including bending and welding angles as necessary gusset plates riveting, complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L for preparation of new or previously untreated steel & iron surfaces including one coat of red oxide primer over that applying two coats of synthetic enamel paint of any description over 10cm in width or girth not otherwise described all as specified and directed by Engr-in-Charge |
| 13 | M&L two coats of seamless elastomeric waterproof compound over and including a coat of primer and a layer of reinforcement cloth in between as per the manufacturer"s instructions and as directed by Engineer-in-Charge. Make: Dr fixit New coat or as approved by Accepting officer. |
| 14 | M&L hacking out old broken glasses (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins / spring clips for north light trusses height upto 15 mtr, complete all as specified and directed by Engr-in-Charge. |
| 15 | S&F 6 mm thick solid polycarbonate transparent sheet fixed to metal frame using aluminium beading, clips screws etc, complete all as specified and directed by Engr-in-Charge. Note: Make of Polycarbonate sheet shall be approved by Accepting Officer. |
| 16 | S&F welded steel wire fabric of weight exceeding 4 Kg per Sqm welded to steel section at any position complete all as specified and directed by Engr-in-charge. |
| 17 | Taking up cast iron water mains (including all fittings) with spigot and socket ends and lead recovering lead complete all as specified and directed by Engr-in-charge. |
| 18 | S&F 200mm bore sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls, complete all as specified and directed by Engr-in-Charge. |
| 19 | S&F in repairs 200mm bore CI Bends (any radius) with duck"s foot or heel rest (ISI marked), complete all as specified and directed by Engr-in-Charge. |
| 20 | S&F in repairs of stainless steel (SS-304) wind turbine ventilator of 24" throat dia size with capacity of 2700 cfm to be mounted on top of a FRP base plate of size 5 1/2" x 3 1/2" x 2mm thick with venture dome, including necessary cutting of existing roof sheets, sealing with watertight arrangement, etc., complete all as specified and directed by Engr-in-Charge. Technical specifications of fan:- No./M.O.C of fins : 42/S.S. Thickness of fins: 0.50 mm M.O.C of Top cover & Mounting Ring S.S Internal fittings (Shaft, Base Frame & Connecting Roads) : G.I. Revolution Mechanism : Double Jet Sealed Ball Bearings or Self Lubricated Nylon Bush Make: Duraplast/ Nuplast/ Aircool or equivalent as approved by accepting officer. |
| 21 | M&L for silicon sealant for joints and junctions after cleaning and making free from dust and drying the surface of valley gutter any girth and description, complete all as specified and directed by Engr-in-Charge. |
| 22 | M&L for fair cutting not exceeding 10cm width or girth on exposed surfaces of brickwork straight or raking cutting such as in splays, chamfers, etc. including rubbed finish and waste, complete all as specified and directed by Engr-in-Charge. |
| 23 | M&L for providing, plain cement concrete of type B0 1:2:4 by using 12.5mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr-in-Charge. |
| 24 | Demolition of cement concrete (un-reinforced) as in ground floors and paving not exceeding 15cm thickness (below or above the ground level) by breaking up and disposal of rubbish and debris to a distance not exceeding 100 m complete all as specified and directed by Engr-in-Charge. |
| 25 | Demolition of RCC in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed by Engr-in-Charge. |
| 26 | S&F in replacement of 50 x 5 mm thick mild steel flat as wind tie complete all as specified and directed by Engr-in-Charge. |
| 27 | M&L for providing 4mm thick asbestos cement plain building boards including aluminium anodized snap grid frame work for false ceiling size of grid 605 x 605mm thickness of section not less than 0.5mm of 4mm dia GI hanger fixed with steel dash fastener including necessary alternation for fixing electrical fixtures including taking down old false ceiling boards with frame complete all as specified and directed by Engr-in-Charge. |
| 28 | Taking up or down existing steel tubing/PPR pipe and connections including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-Charge for the size 15mm dia bore. |
| 29 | All as per sl item No 28 but for 20 mm dia bore complete all as specified and directed by Engr-in-Charge. |
| 30 | Supply, fixing, jointing and testing galvanized iron tube medium grade with all fittings such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floors complete all as specified and directed by Engr-in-Charge for the size 15mm dia bore |
| 31 | All as per sl item No 30 but for 20 mm dia bore complete all as specified and directed by Engr-in-Charge. |
| 32 | S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastec ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 33 | S&F in repairs of fancy type chromium plated cast copper alloy bib taps long shank & cup 15 mm dia bore complete all as specified and directed by Engr-in-Charge. |
| 34 | S&Fin repair of PVC PTMT bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe or forbrass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Make - Polytuff /Paryag |
| 35 | S&F in repair of Wall mixture 15mm bore dia cast copper alloy with cap capston chromim plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-Charge. Make:- Marc/Jaguar/Volga |
| 36 | S&F in repair of 15 mm dia bore stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed complete all as specified and directed by Engr-in-Charge. |
| 37 | S&F in replacement of 500 Litre capacity of rotational moulded polyethylene water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified and directed by Engr-in-Charge |
| 38 | All as per item No 37 above but 1000 litre capacity complete all as specified and directed by Engr-in-Charge. |
| 39 | S&F in repairs of 15 mm dia bore stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F in repairs of 15 mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup (concealed type) complete all as specified and directed by Engr-in-Charge. |
| 41 | S&F in repairs of 10 ltrs capacity PVC low level flushing cistern white, ISI marked, make as specified with inlet, float valve and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F in repairs of vitreous china squatting pan “ORISSA PATTERN” size 580mmx440mm ‘white’ with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and directed by Engr-in-Charge. |
| 43 | S&F in repairs of vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or outgoing pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F in repairs of Health Faucet with 1.5mtr long SS tube and hook complete all as specified and directed by Engr-in-Charge. |
| 45 | S&F in repair of water closet seat, white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and directed by Engr-in-Charge. |
| 46 | S&F in repair of vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and directed by Engr-in-Charge. Note : Pillar tap shall be measured as supply only under respective item. |
| 47 | Supply only PVC connection 15 mm dia and 450 mm long with both end brass fly nut complete all as specified and directed by Engr-in-Charge. |
| 48 | S&F in repairs of 15 mm dia bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or “cold’ with long screwed shank and flynuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 49 | S&F in repairs of 15 mm dia bore cast copper alloy chromium plated fancy type mixer pillar tape for cold & hot water complete all as specified and directed by Engr-in-Charge. |
| 50 | S&F in repairs of 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F in repairs of brass chromium plated bottle trap 32mm bore for wash hand basin with inlet and outlet and screwed for pipe or complete all as specified and directed by Engr-in-Charge. |
| 52 | Supply only 32mm dia waste fitting brass chromium plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F in repairs of PVC bath room cabinet with mirror of size 432 mm x 311 mm complete all as specified and directed by Engr-in-Charge. |
| 54 | S&F in repairs of brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and directed by Engr-in-Charge. |
| 55 | S&Fin repairs of 600 mm X 450 mmmirror 5 mm thick of selected quality glass, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screw and cup washer complete all as specified and directed by Engr-in-Charge. |
| 56 | S&F in repairs of toilet paper holder chromium plated fixed to wall with chromium plated brass screw complete all as specified and directed by Engr-in-Charge. |
| 57 | S&F in repairs of 125 mm fancy type shower roses brass chromium plated with C P arms for15mm bore GI pipe complete all as specified and directed by Engr-in-Charge. |
| 58 | S&F in repair of soap dish brass chromium plated fixed to wall with brass chromium plated screw complete all as specified and directed by Engr-in-Charge. |
| 59 | M&L for 20 mm granite slab for service counter and platform over and including 15 mm thick screed bed or bedding layer ofcement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including making good the edges complete all as specified and directed by Engr-in-Charge. |
| 60 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge. |
| 61 | M&L for glazed ceramic colour tile in patch area size 300mmx200mmx7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as in dado/skirting etc over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge. |
| 62 | M&L for non skid ceramic colour tiles patch area, 7 to 8 mm thick(square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm ( 300 mmx300mm x 7mm thick) set and jointed in neat cement slurry and pointed in colour cement as in floorover and including 15 mm thick screed bed or bedding layer ofcement mortar (1:6) complete all as specified and as directed. |
| 63 | S&F non skid ceramic colour tiles joint free edge cut coloured tiles in patch area size 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm (400mmx400mmx8mm thick) set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge. |
| 64 | All as per above item No 67 but as on dado/ skirting incl 10 mm thick rendering in CM (1:4) complete all as specified and directed by Engr-in-Charge. |
| 65 | S&F non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm in floors, including 15 mm thick screed in CM (1:6) complete all as specified and directed by Engr-in-Charge. |
| 66 | S&F non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm on vertical surfaces such as skirtings including 10 mm thick rendering in CM (1:4) etc complete all as specified and directed by Engr-in-Charge. |
| 67 | S&F in repairs of PVC floor trap size 75 mm dia outlet with grating including connection to waste pipe with cement joint including taking down existing trap complete all as specified and directed by Engr-in-Charge. |
| 68 | Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engr-in-Charge. |
| 69 | M&L for Rendering 15mm thick in patches in cement mortar in (1:4) on fare face of brick work or concrete surfaces even and smooth without using extra cement & with using integral water proofing compound complete all as specified and directed by Engr-in-Charge. |
| 70 | M&L for Rendering 15mm thick in patches in cement mortar (1:6) on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement including taking down cement plaster complete all as specified and directed by Engr-in-Charge. |
| 71 | M&L for Rendering 5mm thick in patches in cement mortar in (1:3) on ceiling includg taking down cement plaster complete all as specified and directed by Engr-in-Charge. |
| 72 | S&F in repairs of corner glass shelf 300 mm complete all as specified and directed by Engr-in-Charge. Make: crown/marc |
| 73 | S&F in repairs of front glass shelf 450 mm long complete all as specified and directed by Engr-in-Charge. Make: Crown |
| 74 | Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed by Engr-in-Charge. |
| 75 | M&L for rendering 15 mm thick wall plaster in CM (1:3) mixed with water proofing compound complete all as specified and directed by Engr-in-Charge. |
| 76 | Supply only Integral water proofing compound complete all as specified and directed by Engr-in-Charge. |
| 77 | M&L for wire brushing and cleaning top surface of tiles, cement concrete, including flashings and junction of parapets etc and surface painting with a layer of blown grade bitumen of 85/25 penetration grade @ 1.70 Kg/Sqm and lightly tampered to the surface of roof or sunken etc complete all as specified and directed by Engr-in-Charge. |
| 78 | S&F APP based polymeric membrane mimimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric land on primed surfaced by forced application complete all as specified and directed by Engr-in-Charge. |
| 79 | M&Lfor 40 cm or less lime concrete with lime mortar (1:2) mix and 40 mm graded brick coarse aggregate in sub floors as in sunken complete all as specified and directed by Engr-in-Charge. |
| 80 | S&F in repairs of 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm complete all as specified and directed by Engr-in-Charge. |
| 81 | S&F 110 mm bore of pipe PVC (SWR) bends of any radius / shoefixed to PVC pipes complete all as specified and directed by Engr-in-Charge. |
| 82 | M&L for cleaning away all grass, vegetation, dry leaves, plant, roots of small plant, from top of valley gutter and making good/refixing in same position to disturbed pipes/valley gutter/roof sheets etc. complete all as specified and directed by Engr-in-charge. Note: Work will be executed at height 15 m to 20 m. |
| 83 | M&L for cleaning of all dust and loose material by brush/blower/grinder including removing of vegetation/dry leaves from the top of valley gutter/GI sheet and pipe surface and sealing of all joints pin holes & gap with sealant before applying coats. Then applying STP Tarfelt LM diluted with portable water in the ratio (1:1) priming coat followed by 2 coat of STP trafelt LM @ 1 Kg/m2 by brush allowing it to dry for 10-12 hr in between 1st and 2nd coat complete all as specified and directed by Engr-in-charge. Note: Work will be executed at height 15 m to 20 m. |
| 84 | M&L for flash strip tap 100 mm wide, 10m approx length per rolls on roofs sheet/valley gutter etc complete all as specified and directed by Engr-in-charge. Note: Work will be executed at height 15 m to 20 m |
| 85 | M&L for preparation of surfaces by cleaning all debris/loose particles/dusts by brush/blower/grinder including removing of vegetation/dry leaves, making surface dry by using blower/heat torch gun wherever required and fixing/pasting self adhesive bituminous based tarfelt 2mm thick, approx 20m length of roll waterproofing membrane with release film applicable to roofs/valley gutters/concrete surfaces etc. duly fixed on surface as directed by Engr-in-Charge. Note: Work will be executed at height 15 m to 20 m. |
| 86 | Note: All work will be executed at height varying 12 mtr to 20 mtr. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
