|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm |
| 2 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) |
| 3 | Dismantling doors and windows, chowkhats with holdfast and including stacking of materials as directed by engineer in charge with in adistance of 60 metre. |
| 4 | Dismantling doors and windows leaves and including stacking of dismantled materials as directed by engineer in charge with in adistance of 60 metre. |
| 5 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.metersand under, including cutting the patch in proper shape, raking out joints andpreparing and plastering the surface of the walls complete, including disposalof rubbish to the dumping ground, all complete as per direction of Engineerin-Charge. Ground Floor |
| 6 | 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat ofneat cement and thick coat of Lime wash on top of walls when dry for bearingof R.C.C. slabs and beams Ground Floor . |
| 7 | Making grooves 10 to 12 mm wide x 8mm deep in of the wails or in ceiling vertically or horizontallyas required |
| 8 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thicknessto be specified by the manufacturer) of 1st quality conforming to IS : 15622 ofapproved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with greycement slurry @ 3.3 kg/sqm including pointing the joints with white cementand matching pigment etc., complete. |
| 9 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matchingshade complete. |
| 10 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate) finished with a floating coat of neat cement, including cement slurry,but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. |
| 11 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (PartI) non-decorative type, core of block board construction with frame of 1st classhard wood and well matched commercial 3 ply veneering with vertical grains orcross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 12 | Providing and fixing M.S. rivets of sizes in position. |
| 13 | Providing and fixing of hold fast for chaukhats of door sIn addition, windows. |
| 14 | Providing of door / windows grill |
| 15 | Z- section steel windows (open able) |
| 16 | Angle iron door chaukhats 40X40X5 |
| 17 | Fixing of door, window/ventilator chaukhats in position |
| 18 | One priming coat & one coat oil distemper on new work including supply of all materials, labour and T& P etc. required for proper completion of the work.As in item no.649 above but for every coat after the first coat Ground floor |
| 19 | Finishing walls with Premium Acrylic Smooth exterior paint with Siliconeadditives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and includingpriming coat of exterior primer applied @ 2.20 kg/10 sqm)Ground floor |
| 20 | One priming coat & one coat oil distemper on new work including supply of all materials, labour and T& P etc. required for proper completion of the work.As in item no.649 above but for every coat after the first coat Ground floor |
| 21 | Providing and applying white cement based putty of average thickness 1 mm,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete.Ground floor |
| 22 | Painting or vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I. No. 103 1950.Same as in item 641 above but for every coat after 1st coat. Details of cost for 650 sft. Area |
| 23 | wood surface. |
| 24 | Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with : 4.0 mm thick glass panes |
| 25 | Ramp with Slope 1:12 & width of 1.8 m & plinth height of 300 mm from ground level with steel handrails & chequred tiles. |
| 26 | Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete. |
| 27 | Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mmnominal size) |
| 28 | Centering and shuttering including strutting, propping etc. and removal of formfor Foundations, footings, bases of columns, etc. for mass concrete |
| 29 | Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All workup to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mmnominal size) |
| 30 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) B/W in foundation |
| 31 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level in all shapesand sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)B/W up to plinth LVL. |
| 32 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placingin position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 33 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate) finished with a floating coat of neat cement, including cement slurry,but excluding the cost of nosing of steps etc. complete. |
| 34 | Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cementslurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 10 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment |
| 35 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622, of approved make in all colors and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 36 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 37 | Pathway marking |
| 38 | Parking |
| 39 | Internal electrical (Toilet) |
| 40 | Internal sanitary (Toilet) |
| 41 | Drinking water (Civil Work) |
| 42 | W/s for drinking water |
| 43 | Cost of stainless steel handrail in stairs |
| 44 | Cost of stainless steel handrail in corridors |
| 45 | Cost of Fire Extinguisher |
| 46 | Corridor marking |
| 47 | Cost of reflector and anti-skid nosing on staircase |
| 48 | Cost of signage and general boards |
| 49 | Supply, Installation, Testing & Commissioning of Lift (13 Persons, 884 Kg., 2 Stops, 2 Openings, car size-2000mm wide x 2400mm deep,) as per Specification attached etc. of Orient, Thyssenkrupp, Johnson, Otis, Concourse or equivalent. |
| 50 | Supply and Fixing of StructuralSteel frame (such as tees, angles, channels etc)& Outer glazing with ACP (ACP Covering) |
| 51 | Each Additional Floor |
| 52 | Providing and fixing of water cooler |
| 53 | Providing of reception counter |
| 54 | Supply and providing of wheel chair for disabled person at each floor |
| 55 | Side Table 1500*750*750mm with 3 drawer |
| 56 | Reception Chairs |
| 57 | Bench (Stainless Steel) for blind |
| 58 | Mess Table for disabled |
| 59 | Evacuation chairs to be available in every floor |
