|
| 1 | Taking down existing unserviceable point wiring of any description/type/ size of light/fan/power/two way/bell etc., on TW batten/conduit includingremovalof batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc., and removal of unserviceable material outside of MoD land after considering against schedule of credit and making good the disturbed surfaces of wall/ceiling complete all as specified and as directed. |
| 2 | Disconnecting and removingthe MCB DBs from any height, stripping out the fitting for examine replacement of unserviceable spare parts, reassembling, refixing in original position includingminor repairs for the smooth functioning and testing complete all as specified and as directed. |
| 3 | M & L for Point wiring with 1.5 Sqmm FRLS copper conductor single core PVC insulated sheathed 1100 V multistranded drawn through existing conduit and including rigid 20mm dia PVC conduit and conduit accessories medium grade and modular accessories including fixing/grouting sunken/ surface along with existing flush box of sutiable thickness covered with suitable modular cover plate including running up of 1.5 Sqmm FRLS copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc., complete all as specified and as directed for one Light/Fan/Bell Point Controlled by one Switch. NOTE: 1. Modular Cover Plate shall be inclusive in the quoted rate.Nothing extra shall be paid in this regard.2. Cutting & Chases will be measured and paid seperately |
| 4 | All as per Sl item No 3 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed. |
| 5 | All as per Sl item No 3 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed. |
| 6 | All as per Sl item No. 3 here in before, but for using2.5 Sqmm single core copper conductor cable of multistranded PVC insulated sheathed FRLS 1100 Volts grade for 3 Pin 15 Amps switch socket combinationpoint on independent boardincluding running of 2.5 Sq mm FRLS copper conductorPVC insulated cable as earth continuity conductor complete all as specified and as directed. |
| 7 | All as per Sl item No. 3 here in before, but for wiring drawn through PVC Casing and Capping, but for One light/fan/Bellpoint controlled by one, one way switch 5 amps, SP complete all as specified and as directed. |
| 8 | All as per Sl item No. 7 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed. |
| 9 | All as per Sl item No. 7 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed. |
| 10 | All as per Sl item No. 7 here in before, but for using2.5 Sqmm single core copper conductor cable of multistranded PVC insulated sheathed FRLS 1100 Volts grade for 3 Pin 15 Amps switch socket combinationpoint on independent boardincluding running of 2.5 Sq mm FRLS copper conductorPVC insulated cable as earth continuity conductor complete all as specified and as directed. |
| 11 | S & F switch piano single pole Modular switch 1 way 10 Amps, 1 Module complete all as specified and as directed. |
| 12 | S & F switch piano single pole Modular switch 1 way 16 Amps, 1 Module complete all as specified and as directed. |
| 13 | S&F Modular Bell Push 10A, 1 Module complete all as specified and as directed. |
| 14 | S&F socket outlet modular type multipurpose 2/3 Pin, 6 amps, 230 volts combined 2 Module complete all as specified and as directed. |
| 15 | S&F socket outlet modular type multipurpose 2/3 Pin, 6/16 amps, 230 volts combined 2 Module complete all as specified and as directed. |
| 16 | S&F Modular ceiling fan regulator stepped type heavy duty suitable to work on 230 volts, 2 Module complete all as specified and as directed. |
| 17 | M & L for Point wiring with 1.5 Sqmm copper conductor single core PVC insulatedFRLS 1100 Volts multistranded drawn through and including 20 mm dia rigid PVC conduit surface and conduit accessories medium grade and existing pressed steel terminal boxes including fixing/grouting sunken/ surface as per site requirement covered with suitable laminated sheet for fixing switches / sockets/ regulators etc including running up of 1.5 Sqmm FRLS copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed for one light/fan/bell point controlled by one, one way switch 5 amps, SP.Note: Cutting/chases will be measured and paid seperately. |
| 18 | All as per Sl item No 17 here in before, but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed. |
| 19 | All as per Sl item No 17 here in before, but for one 3 pin, 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed. |
| 20 | All as per Sl item No. 17 here in before, but for using2.5 Sqmm single core copper conductor cable of multistranded PVC insulated sheathed FRLS 1100 Volts grade for 3 Pin 15 Amps switch socket combinationpoint on independent boardincluding running of 2.5 Sq mm FRLS copper conductorPVC insulated cable as earth continuity conductor complete all as specified and as directed. |
| 21 | S & F switch piano single pole flush type 5 amps, 230 volts complete all as specified and as directed. |
| 22 | S&F bell push 5 A flush type complete all as specified and as directed. |
| 23 | S&F socket outlet flush type multipurpose 2 in 1, 3 Pin, 5 amps, 230 volts complete all as specified and as directed. |
| 24 | S&F switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1230 Volts complete all as specified and as directed. |
| 25 | S&F switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps with flush type complete all as specified and as directed. |
| 26 | S&Fceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed. |
| 27 | S & F electronic type regulator stepped heavy duty for ceiling fan suitable to work on 230 volts complete all as specified and as directed. |
| 28 | S&F bell ding dong working on 230 volts AC complete all as specified and as directed. |
| 29 | S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as specified and as directed. |
| 30 | S & F in replacement of Fancy type lights (Round Type)of 20 watts including LED lamp complete all as specified and as directed.Make: Philips Model SM251C LED20S - 6500 PSU WH or equivalent make as approved by GE. |
| 31 | S & F in replacement of wall mounted batten type LED light of 10/12 watts with aluminium extruded batten and system lumens of 1200 lm minimum with IP & surge protection alongwith driver efficiency >85% and power factor >0.95 , colour rendering index CRI>80 along with integrated driver completeand connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rosecomplete all as specified and as directed.Make: Philips Model BN021 LED12S PSU GR orHavells Model LUMILINEBS10WLED865SPCWH or C&S Cat Part No LTTB2F10WLED/W |
| 32 | S & F in replacement of wall mounted box type LED batten suitable for 20 watts with LED tube 20 watts lamp along with integrated driver and connecting to all accessories from ceiling rose to fitting complete all as specified and as directed.Make: Havells Regal Batten T8UPTO1X22WDSBSWH & Tube rod Cat No PHOTONULTRA2.01213T8SSTL20WLED865SPC, C&S Cat Part No LTDC1220WLED/WD or equivalent in Wipro as approved by GE. |
| 33 | S & F in replacement of wall mounted batten type LED light with co extruded polycarbonate body suitable for 20W LED lamp along with integrated driver completeand connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rosecomplete all as specified and as directed.Make: Havells Cat part No LUMILINE BS20WLED865SPCWH or C&S Cat part No LTTB4F20WLED/W or Philips Cat Part No. BN021CLED 22 S PSU CWER as approved by GE. |
| 34 | S & F in replacement of wall mounted batten type LED light with co extruded polycarbonate body suitable for 36/40W LED lamp along with integrated driver completeand connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rosecomplete all as specified and as directed.Make: Wipro Model No:D533665 or Havells Cat Part No LHEXACP7IN1W036 or C&S Cat Part No LTTB4F40WLED/W as approved by GE. |
| 35 | S & F in replacement of LED security Light luminaire 24/25W with deep drawn housingincluding all accessories and Lamp, with suitable pipe bracket 25 mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts complete all as specified and as directed.Make: Bajaj Model No. ENXT P 24L WH SY PC SD Havells Cat Part No - ENDURA SUNDOWNS L25LED765PASYBOPCIHD, C&S Cat Part No LTESS25WLED/LS as approved by GE. |
| 36 | S & F in replacement of 10W bulk head luminaire suitable for outdoor with high brightness giving glare free light complete all as specified and as directed.Make: Havells Cat Part HEXAFT10WLED857 SSYMBOPC or C&S Cat Part No LTB10WLED as approved by GE. |
| 37 | S & F MCB SP 6 to 32 Amps 240 volts for fixing on MCB DB\"scomplete all as specified and as directed.Make : Havells - Cat No DHMGCSPF006-032, Standard Cat No - DSMGCSPF006-032, C&S Cat No - CSMBS1C6-32, IndoAsian Cat Part No. 811129 as approved by GE. |
| 38 | S & F in replacement ofMCB SPN 40 Amps 240 volts for fixing on MCB DB\"scomplete all as specified and as directed.Make: Havells Cat No DHMGCSNF040, Standard Cat No - DSMGCNF040, C&S Cat No - CSMBS1C40N, IndoAsian Cat Part No. 811152 as approved by GE. |
| 39 | S & F MCB Four pole, 415 volts suitable for fixing on MCB DB of capacity63 Amps complete all as specified and as directed.Make: Havells Cat No - DHMZCTNF063, Standard Cat No - DSMGCTNF063, C&S Cat No - CSMBS3C63N, Indo Asian Cat No. 811220 as approved by GE. |
| 40 | S & F in replacement of MCCB four pole, 415 volts suitable for fixing on MCCB DB of capacity 100 Amps complete all as specified and as directed. |
| 41 | S & F in replacement of MCCB four pole, 415 volts suitable for fixing on MCCB DB of capacity 160 Amps complete all as specified and as directed. |
| 42 | S & F sheet metal enclosure MCB DBSPN 4 way with 200 amps rated bus bar 240 volts double door with locking system complete all as specified. Make : Havells - Cat Part No. DHDPSHODRWO4, Standard Cat No - DSDCSHODOW04, C&S Cat No - CSDBSPNPDD04 as approved by GE. |
| 43 | All as per Sl item No 42 here in before, but SPN 8 way DB complete all as specified and as directed.Make: Havells - CAT Part No DHDPSHODRWO8, Standard Cat No - DSDCSHODOW08, C&S Cat No - CSDBSPNPDD08 as approved by GE. |
| 44 | All as per Sl item No 42 here in before, but SPN 12 way DB complete all as specified and as directed.Make : Havells - CAT Part No DHDPSHODRW12, Standard Cat No - DSDCSHODOW12, C&S Cat No - CSDBSPNPDD12 as approved by GE. |
| 45 | S & F in replacement ofhorizontal type TPN DB 4 way double door made out of CRCA sheet housing withpowder coating & confirming to IS 13032, IS 8623, BS 5486 accomdated suitably in a MS enclosure weather proof made out of 3 mm thick MS sheet having hinged and robust locking arrangement including painting by red-oxide one coat and powder coated complete all as specified and as directed.Make : Havells - Cat Part No. DHDNTHODAW04, Standard Cat No - DSDNTSODAW04, C&S Cat No - CSDBTPNPDD04 as approved by GE. |
| 46 | S & F in replacement of single pole and neutral enclosure with a two pin and earth plug and socket metal clad complete with one singlepole MCB 20 Amps (AC Box) complete all as specified and as directed.Make : Havells - CAT Part No DHDPUSN020, Standard Cat No - DSDPUSN020, C&S Cat No - CSDBACBOX020 as approved by GE. |
| 47 | M & L for submain wiring with 2 runs of single core 4 sqmm PVC insulated sheated multistranded FR 1100 volts grade with copper conductor drawn through existing non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 4 sqmm PVC insulatedsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed.Note: 3 runs of 4 Sqmm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre. |
| 48 | All as per Sl item No 47, but 2 runs of single core 6 Sqmm and one run of single core 6 Sqmm as earth continuty conductor complete all as specified and as directed.Note: 3 runs of 6 Sqmm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre. |
| 49 | All as per Sl item No 47, but 2 runs of single core 10 sqmm and one run of single core 10 sqmm as earth continuty conductor complete all as specified and as directed.Note: 3 runs of 10 Sqmm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre. |
| 50 | Material and labour for earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanisediron pipe with funnel wire mesh for watering and connecting to main switch board / control board all s shown in electrical plateof SSR Pt - I connected to earthing test point and including testing on completion complete all as specified and as directed.NOTE: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate inpit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia TMT bars @ 100mm centre to centre both ways with 8mm dia handle galvanised iron funnel with watering pipe, wire mesh, complete. |
| 51 | Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earting etc., as required 4mm dia galvanised iron or steel wire complete all as specified and as directed. |
| 52 | M&Lfor cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges ofandings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth complete all as specified and as directed. |
| 53 | S & F in replacement of switch piano single pole flush type 5 amps, 230 volts complete all as specified and as directed. |
| 54 | S & F in replacement of switch piano single pole Modular switch 1 way 10 Amps, 1 Module complete all as specified and as directed. |
| 55 | S & F in replacement of switch piano single pole Modular switch 1 way 16 Amps, 1 Module complete all as specified and as directed. |
| 56 | S & F in replacement of bell push 5 A flush type complete all as specified and as directed. |
| 57 | S & F in replacement of Modular Bell Push 6A, 1 Module complete all as specified and as directed. |
| 58 | S & F in replacement of socket outlet modular type multipurpose 2/3 Pin, 10 amps, 230 volts combined 2 Module complete all as specified and as directed. |
| 59 | S & F in replacement of socket outlet modular type multipurpose 2/3 Pin, 6/16 amps, 230 volts combined 2 Module complete all as specified and as directed. |
| 60 | S & F in replacement of socket outlet flush type multipurpose 2 in 1, 3 Pin, 5 amps, 230 volts complete all as specified and as directed. |
| 61 | S & F in replacement of switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1230 Volts complete all as specified and as directed. |
| 62 | S & F in replacement of switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush type with complete all as specified and as directed. |
| 63 | S & F in replacement of Modular ceiling fan regulator stepped type heavy duty suitable to work on 230 volts complete all as specified, 2 Module complete all as specified and as directed. |
| 64 | S & F in replacement of electronic type regulator stepped heavy duty for ceiling fan suitable to work on 230 volts complete all as specified and as directed. |
| 65 | S & F in replacement of bell ding dong working on 230 volts AC Supply complete all as specified and as directed. |
| 66 | S & F in replacement of lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as specified and as directed. |
| 67 | M & L for bracket made out of GI pipe 25 mm dia bore not less than 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat 40x5mm thick complete with MS nuts, bolts and washers etc bent to required shape complete all as specified and as directed. |
| 68 | S & F in replacement of MCB SP 6 to 32 Amps 240 volts for fixing on MCB DB\"scomplete all as specified and as directed.Make : Havells - Cat No DHMGCSPF006-032, Standard Cat No - DSMGCSPF006-032, C&S Cat No - CSMBS1C6-32, IndoAsian Cat Part No. 811129 as approved by GE. |
| 69 | S & F in replacement of MCB SPN 40 Amps 240 volts for fixing on MCB DB\"scomplete all as specified and as directed.Make : Havells Cat No DHMGCSNF040, Standard Cat No - DSMGCNF040, C&S Cat No - CSMBS1C40N, IndoAsian Cat Part No. 811152 as approved by GE. |
| 70 | S & F in replacement of MCB Four pole, 415 volts suitable for fixing on MCB DB of capacity63 Amps complete all as specified and as directed.Make : Havells Cat No - DHMZCTNF063, Standard Cat No - DSMGCTNF063, C&S Cat No - CSMBS3C63N, IndoAsian Cat Part No. 811220 as approved by GE. |
| 71 | S & F in replacement of ultra bright LED polycarbonate tube light20 Watt with very high efficiency suited for installation in existing T8 fitting with G13 lamp holders (single side connecion) complete all as specified and as directed.Make: Havells cat No PHOTONULTRA2.012 13T8SSTL20WLED865SPC, C&S Cat No - LT4F20WLEDT8/WD, Halonix cat part no HLTD-04-20-CW-PC as approved byGE. |
| 72 | S & F in replacement ofLED lamp 9 Watts complete all as specified and as directed. |
| 73 | S & F in replacement of PVC Round blocks of 4\" complete all as specified and as directed. |
| 74 | S & F in replacement ofPVC dummy sheets circular type of 4\" complete all as specified and as directed. |
| 75 | S & F in replacement ofPVC dummy sheets circular type of 6\" complete all as specified and as directed. |
| 76 | S & F in replacement of rigid PVC casing & capping 20/25 mm wide complete all as specified and as directed. |
| 77 | S & F in replacement ofPVC rectangular box (Gang box) with 5 Amps switch socket complete all as specified and as directed. |
| 78 | S & F in replacement ofPVC rectangular box (Gang box) with 5/15 Amps switch socket complete all as specified and as directed. |
| 79 | S & F in replacement ofPVC wire of Flexible cord with copper conductor multistanded of twin core 23/0.198 complete all as specified and as directed. |
| 80 | S & F in replacement ofPVC copper wire of 1.5 sq mm single core multistranded complete all as specified and as directed. |
| 81 | S & F in replacement ofPVC copper wire of 2.5 sq mm single core multistrandedcomplete all as specified and as directed. |
| 82 | S & F in replacement ofPVC copper wire of 4 sq mm single core multistranded complete all as specified and as directed. |
| 83 | S & F in replacement ofPVC copper wire of 6 sq mm single core multistranded complete all as specified and as directed. |
| 84 | S & F in replacement ofservice wire twin core of 10.0 Sqmm aluminium type flat un-armoured complete all as specified and as directed. |
| 85 | Taking down ceiling fans 48”/56” sweep or exhaust fans upto 300mm, removing/cleaning of dust properly cleaning, greasing & overhualing of bearings including refixing in same location and connecting up complete all as specified and as directed.Note : Replacement of defective/worn out parts will be measured and paid for separately |
| 86 | S & F in replacement of2.00/2.50Mfd capacitor complete all as specified and as directed. |
| 87 | S & F in replacement of3.15/4.00 Mfd capacitor complete all as specified and as directed. |
| 88 | S & F in replacement ofball bearing/Gun Metal Bush of exsiting ceiling fans on site complete all as specified and as directed. |
| 89 | S & F in replacement ofFlexible copper three core of size 23/0076” wire/cable complete all as specified and as directed. |
| 90 | S & F in replacement of‘U’ clamps complete with nut, bolts & split pins Heavy duty, suitable for existing ceiling fan on site complete all as specified and as directed. |
| 91 | S & F in replacement ofMS rod for ceiling fans 3 ft long with both end suitable size holes and cut mark complete all as specified and as directed. |
| 92 | S & F in replacement ofFan Caps of PVC type suitable for 1200/1400mm sweep complete all as specified and as directed. |
| 93 | S & F in replacement ofnut of bolts washers for fan blades fixing of ceiling fan of any make/size/type as per site requirement (6 Nos for each set) complete, suitable for existing ceiling fan on site complete all as specified and as directed. |
| 94 | Material and labour for rewinding of burnt Ceiling fan motor of size 48\"/56\" sweep with super enameled copper wire of suitable size as per details given below of any make, type, model incl transporationcomplete all as specified and as directed. |
| 95 | All as per Item No 94 above but for exhaust fan motor of sweep upto 300mm complete all as specified and as directed. |
| 96 | Material and labour for Painting of ceiling fans 48”/56” size complete at site, with super synthetic enamel paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc., complete all as specified and as directed. |
| 97 | Taking down the geysers of capacity 25/35 from its mounting position by removing all water and electric connections and de-assembling the geyser after carrying out the following works complete all as specified and as directed:- (a)Descaling, cleaning the inner tank thoroughly and there should not be any bad taste of water.(b)Examining the water tightness of storage tank after cleaning.(c)Examining the physical condition of thermostat, base assembly fusible plug and outer tank for its serviceability.(d)Inspection of pilot lamps.(e)Reassembling the geyser parts and testing including checking all electrical system (ensuring there is no current leakage) and also conducting hydraulic testing.(f)Re-fixing the Geyser and making electric connections,inlet and outlet water connections and testing and checking of all water inlet, outlet valves connected with geysers.Note : Defective /worn outpartsif required shall be measured and paid separetely under relevant items in this schedule. |
| 98 | Supply and fix braided PVC connection of 2 feet complete all as specified and as directed. |
| 99 | Supply and fix braided rubber PVC connection of 3 feet complete all as specified and as directed. |
| 100 | Supply and fixMS base plate cup any type with screws of suitable size as per requirement complete all as specified and as directed. |
| 101 | Supply & fix heating element of the 1.5 KW rating as required at site including rubber washers of any make and type complete all as specified and as directed. |
| 102 | Supply & fix Steel inner tank of 25 litre capacity geyser tank by made out of steel sheets appropriate thickness complete all as specified and as directed. |
| 103 | Supply & fix thermostat suitable for the geysers of 25 Litres capacities complete all as specified and as directed. |
| 104 | S & F in replacement ofAir Release Valve suitable for geyser 25 ltrs complete all as specified and as directed. |
| 105 | S & F in replacement ofIndication lamp of existing Size/Model (Set of Two) Red & Green complete all as specified and as directed. |
| 106 | S&F in replacement of 1100 Volt grade cable flexible 3 core PVC insulated PVC sheathed with stranded copper conductor of size 2.5 Sqmm complete all as specified and as directed. |
