Special Repair To Cook House Bldg No T-18 / 24 Of 5003 Asc ( Mt ) And Addn / Altn To Bldg No T-126 H Zone And P-126 Rawat Enclave At Rms
Tender Value
44 Lakhs
Estimated cost
Bid Submission
16 Jul 2022
0 days left
EMD
94000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rangapahar → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair To Cook House Bldg No T-18 / 24 Of 5003 Asc ( Mt ) And Addn / Altn To Bldg No T-126 H Zone And P-126 Rawat Enclave At Rms
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | M&L for 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 3 | M&L for vitrified ceramic tiles 10 mm thick polished area of each tiles not exc 0.36 Sqm in floors etc and jointed in neat cement slurry and pointed in coloured cement to match |
| 4 | Ditto all as per item no 3.00 above but as in skirting over and including 10mm thick cement plaster in CM (1:4) and ditto |
| 5 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cemet to match complete all as specified and directed. |
| 6 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 7 | Same as per ser No 6 but on vertical surfaces such as skirting , dado risers to stepsover and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed. |
| 8 | M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm/350 x250 mm,7mm thickover and including 10 mm thick rendering in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed. |
| 9 | Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position. |
| 10 | M&L for second class hardwood as in scantlings clean sawn timberfixed. |
| 11 | M&L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13and n.exc 25 sqcm. |
| 12 | M&L for 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 13 | S&F Chequred cement concrete tiles with grey pigment cement and pigments 20cmx20cmx25 mm thick set jointed and pointed in neat cement slurry in floors |
| 14 | M&L for PCC (1:3:6) type C-2, 75 mm thick (using 40 mm graded stone aggregate) as in plinth protection/hardstanding all as specified and directed. |
| 15 | M&L for forming construction joints 65mm deep x 10mm wide, filled with sealing compound grade \"A\" complete |
| 16 | Disamantling wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets complete all as specified and directed. |
| 17 | S&F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer boardE-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping complete all as specified. |
| 18 | Taking down Shutter of any description but exc 2 sqm each complete all as specifed and directed. |
| 19 | Taking down chowkhat or frame n exc 1.5 sqm each (without taking off shutters from the frame) complete all as specifed and directed. |
| 20 | M&L for 30 mm thick 2nd class hardwood plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density , wood particle board with commercial face veneers , supplied and fitted to chowkats complete all as specified and directed. |
| 21 | M&L 30mm thick 2nd class hard woodGlazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified. |
| 22 | S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples. |
| 23 | S&F in repair mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples. |
| 24 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and fixed with tinned tacks or galvanised wire staples all as directed by Engineer- in -Charge. |
| 25 | S&F anodised aluminium colour frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 26 | S&F for anodised aluminium powder coated ( minimum thickness of powder coationg 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete as as specfied |
| 27 | S&F for aluminium door shutters,aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing,handle 2 Nos in each doorhinges anodised aluminium snap beading, screws etc complete all as specified. |
| 28 | S&F Sheet glass 4.8mm thick clear/sun shade colour glass, ordinary quality and glazing with oil putty in squares exceeding 0.5sqm in each pane. |
| 29 | S&F Sheet glass ordinary quality 4.8 mm thick and glazing in aluminum door in squaresexc 0.5 sqm each |
| 30 | S&F Sheet glass ordinary quality 4.00 mm thick and glazing in aluminum window in squares n exc 0.5 sqm each |
| 31 | S&F Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated brackets guard and railing 60 cm long |
| 32 | S&F3 mm thick Sheet glass, ordinary quality and glazing with oil putty insquare n.exc 0.50 Sqm in each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge. Make : Modifloat/Ashai/Saint Gobain. |
| 33 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 34 | S&F Factory made solid panel pvc doorshutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing at site as per specification and drawing complete all as specified and directed. |
| 35 | S&F 50mm size mild steel butt hinges complete all as specified and as directed. |
| 36 | S&F butt hinges medium grade cold rolled mild steel and fixed size of hinges 100mm long size |
| 37 | S&F 100mm size stainless steel butt hinges,medium weight, cold rolled complete all as specified and as directed. |
| 38 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section. |
| 39 | S&F Aluminium handle cast type anodised 150 mm long |
| 40 | S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section(300 mm long) |
| 41 | S&Ffor 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed. |
| 42 | S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete specified and directed |
| 43 | Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc |
| 44 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbingdown with water etc. complete all as specified and as directed. |
| 45 | M&L for rendering 15mm thick in CM (1:6) on fair faces of brick or concrete work finished the surface even and smooth without using extra cement. |
| 46 | M&L rendering 15 mm thick in CM 1:4 on fair faces of brick or concrete work even and smooth without using extra cement. |
| 47 | M&L rendering 5 mm thick in cement mortar 1:4 on fair faces of brick or concrete work even and smooth without using extra cement in ceiling. |
| 48 | M&L rendering 15mm thick on cement mortar 1:4 mixed with water proofing compound @ 3% of qty of cement finishedof brick or concrete work finished the surface even and smooth without using extra cement.. WPC will be measured and paid separately. |
| 49 | Supply only integral water proofing compound ( ISI marked ) |
| 50 | M&L for Preparation of plasterded or un plasterednew surfaces of ceiling and applying twocoat of white wash completeall as specified and directed. |
| 51 | M&L for applying two coats of oil bound distemper over one coat of primer over a coat of 3mm thick wall care putty on new plastered surfaces of walls including preparation of newsurface complete all as specified and directed. |
| 52 | M&L for applying two coats of oil bound distemper after and including complete removal of existing treatment of old plastered surfaces of walls complete all as specified and as directed. |
| 53 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint of approved shade on walls all as specified & directedby Engineer-in-Charge |
| 54 | M&L for complete removal of existing treatment of wall and applying two coats of distemper oil emulsion over a coat of 3mm thick wall care putty filling complete all as specified and directed. |
| 55 | M&L for preparation of old decorated surfaces of walls including cornices, pilasters etc includingcleaning of bush, shrubs, vegetation, grass,weed,saplings etc (plastered or unplastered surfaces) and applyingtwo coats of cement base paint on old surfaces of walls. |
| 56 | M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint all as specified and directed |
| 57 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girthand applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and as directed. |
| 58 | All as per item No 42 here in before but applying two coats of synthetic enamel paint over a coat of pink wood primer on new surfaces |
| 59 | Taking up or down 15 mm GI steel tubing and connections including cleaning for refixing or removal to store |
| 60 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing. |
| 61 | Taking up or down steel tubing 15mm bore and connections including cleaning for refixing and deposited to stores complete all as specified and directed. |
| 62 | Taking up or down steel tubing 20mm bore and connections including cleaning for refixing and deposited to stores complete all as specified and directed. |
| 63 | S&F 15mm bore GI water tubing medium grade laid in floors or fixed in wall including GIfittings. |
| 64 | S&F 20 mm bore GI water tubing medium grade laid in floors or fixed in wall including GIfittings. |
| 65 | S&F 15mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd. |
| 66 | S&F 20mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd. |
| 67 | S&F vitreous china water closet Padestal pattern (white) including fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as directed. |
| 68 | S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Seat cover complete all as directed. |
| 69 | Supply only flush pipe of polyethylene of low or high density of PVC 32mm dia for low level cistern. |
| 70 | S&F CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed. |
| 71 | S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed. |
| 72 | S&F 15mm bore dia bib taps long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 73 | S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed as approved by Garrrison Engineer |
| 74 | S&F brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed 15mm dia pipe fancy type as approved by Garrison Engineer |
| 75 | S&F brass chromium plated fancy shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as spd & directed and as approved by Garrison Engineer |
| 76 | S&F soap dish chromium plated steel/stainless steel, approx size 160x160mm x 1mm thick , fixed to walls with plugs & CP brass screws complete all as specified and directed. |
| 77 | S&F in repair soap dish chromium plated stell/stainless steel, approx size 160x160mm x 1mm thick, fixed to walls with plugs & CP brass screws complete all as specified and directed. |
| 78 | S&F in repairs 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in CM (1:3) with MS screwscomplete all as specified. |
| 79 | S&F in repairs 600 mm x 450 x 5 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commerical plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fancy type as approved by Garrison Engineer |
| 80 | S&F in repair stainless steel sink, 1mm thick for kitchen with draining board with plug and PVC waste pipe including bedding in cement mortar, fixing brackets overall size 915x460mm, bowl size 410x330x 160mm, asfixed in repairs complete all as specified and directed.(Make: Nirali (Kitchen Queen)/Dimond/Neelkanth/ Prayag/Blue Star). |
| 81 | M&L cement concrete type C2 (1:3:6) (40 mm graded agg) as in surface channels and drains. |
| 82 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred /stopped endsetc complete all as specified and directed. |
| 83 | S&F in repairsfor Draperly rod /Harrison rails of CP of 20mm dia with fixing brackets , stops, rollers and ringsetc. |
| 84 | M&L for fixing 2 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats all as specified and directed |
| 85 | M&L Water Proofing treatment on RCC roof etc comprising with the following operations and as specified herein below :- (a) Taking down/scrapping out existing old tarfelt bituminous compound including sweeping, cleaning, washing down to remove dust etc and removing debris to a distance n exc 250m.(b) 15mm thick plastering in cement mortar 1:4 mixed with WPC @3% by weight of cement finished even & smooth and curing for minimum 7 days (c) Preparing & Cleaning of fully dried cement plastered surface (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 litres per Sqm conforming IS 3384-1986 (e) A layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.5 Kg per Sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be applied over bituminous primer as specified above application of polymeric membrane shall be by torch application. The over lap shallbe minimum 100mm on transverse direction and 75 mm on longitudinal direction. |
| 86 | M&L for one coat of aluminum paint over the APP modified membrane @ 0.11 Kg/sqm. |
| 87 | Dismantling Plain or Corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering |
| 88 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roofcovering /cladding to wall, fixed with self tapping screws as specified |
| 89 | S&F pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified . |
| 90 | S&F for aluminium Window and ventilator shutters, without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified. |
| 91 | S&F 40 mm flap width of Continuous (piano) hinges, mild steel, bright finish or electrogalvanised. |
| 92 | M&L for 18/19mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face fixed with screws to timber framework |
| 93 | S&F external teak wood lipping, 6mm thick, fixed with nails complete all as specified and directed. |
| 94 | S&F 40 mm cupboards knobs fixed with nut screw and washer of brass polished complete as specified and directed. |
| 95 | S&F magnet Catcher for cub board complete all as specified and directed. |
| 96 | S&F 100 mm Hasp and Staple, mild steel, wire type, stove enamel black, including bolt to hinge plate and fixed with screws |
| 97 | S&F 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and dual fluash type complete all as specified(Make Cera, F1020106) complete all as specified and directed. |
| 98 | S&F 15 mm Toilet Paper Holder with stainless steel Flap size. |
| 99 | S&F in repairs CP toilet paper holder complete all as specified and directed. |
| 100 | S&F corner glass shelf assembly 300 mm radius made of 6 mm thickglass, with CP railing, fixed with suitable rowal plug & screws complete all as specified and directed. |
| 101 | S&F in repairs corner glass shelf assembly 250mm radius made of 6mm thick craaylic glass, with CP railing, fixed with suitable rowal plug & screws complete all as specified and directed. |
| 102 | S&F in repairs vitreous china fancy wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed as approved by Garrison Engineer |
| 103 | S&F in repair replacement stainless steel (conforming to AISI-304 grade) plate rack of overall size 750mm x 600mm x 254 mm or equivalent made of 1mm thick stainless steel sheetfixed on CP cantilever brackets, complete all as specified and as directed. Make : Jayna Cat No SBSD-05 or equivalent approved make. |
| 104 | S&F Aluminium (Die cast) body , Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed |
| 105 | M&L for surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil. |
| 106 | M&L for excavation in trenches n.exc 1.5m wide and n.exc 1.5m in deepth; for foundation etc or for shafts, wells, cesspits, manhole, pier holes, etc n.exc 10 Sqm on plan andn.exc 1.5 m in depth and getting out in soft/loose soil. |
| 107 | M&L for PCC (1:4:8) type D-2 (using 40mm graded agg) as in foundation, filling and mass concrete. |
| 108 | M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 109 | M&L for mild steel TMT bars, 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders ,cut to length, bent to shape required including cranking, bending,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. |
| 110 | M&L for RCC (1:1.5:3) type A1 (using 20mm graded) aggregate as in foundations , including rafts , footings , foundation beams, Plinth beams,bases for columns etc , basement slabs , under reamed piles and mass concrete. |
| 111 | M&L for RCC (1:1.5:3) type A1 (using 20mm graded) aggregate as in columns, pillars, piers, posts and struts |
| 112 | M&L for RCC (Nominal Mix) typeB1 (1:1.5:3) (20 mm graded aggregate) as in beams, cantilvers, bressummers, lintels over 1.5m span. |
| 113 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter. |
| 114 | Use and waste of formwork to sides of pillars posts, struts, piers, columns and stanchions finished the suface rough. |
| 115 | Use and waste of formwork to sides and soffits of floors or roof beams, beams haunchings, girders,bressummers lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc. |
| 116 | M&L form work with fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work nexc 200mm thick (horizontal or sloping) |
| 117 | M&L forbrick work with sub class `B` bricks, old size,straight or curved on plan exc 6m mean radius built in CM (1:6)complete all as specified and as directed. |
| 118 | M&L for brick work with sub class `B\" bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4). |
| 119 | S&F Powder coated of any colour (Thickness or powder coating not less than 50 micron) Anodised aluminium frame and shutters for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete. |
| 120 | S&F 4 mm thick frosted glass fixed to aluminium frame work n.exc 0.5 Sq.m in each pane. |
| 121 | S&F3 mm thick frosted glass, ordinary quality and glazing with oil putty insquare n.exe 0.50 Sqm in each pane complete all as specified and as directed by the Engr-in-Charge. Make : Modifloat/Ashai/Saint Gobain. |
| 122 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 123 | S&F 100mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 124 | Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering |
| 125 | M&L for hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface. |
| 126 | M&L 40 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone agg) as damp proof course to horizontal or vertical surfaces including necessary form works, applying evenly a coat of blown type bitumen at 1.50 kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm including 150 micron thick polythene film laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sqm complete |
| 127 | M&L PCC (1:4:8) type D-2 75mm thick as in sub base of floor. |
| 128 | M&L for 75mm thick PCC in (1:3:6) type C1 (using 20mm graded agg ) as in plinth protection/path finished the surface even and smooth without using extra cement. |
| 129 | M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, paving, footpath etc and finished the surface even and smooth without using extra cement completeall as specified and as directed. |
| 130 | M&L for 3 mmthick Birla white putty/JK white wall care putty on walls. |
| 131 | Supplying and laying 16 mm outer diameter CPVC pipe SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as direcetd. |
| 132 | Supplying and laying 20 mm outer diameter CPVC pipe SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as direcetd. |
| 133 | S&F Brass Elbow 16 mm outer diameter CPVC pipe |
| 134 | S&F Brass Elbow 20 mm outer diameter CPVC pipe |
| 135 | M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth. |
| 136 | S&F Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of chromium plated. |
| 137 | S&F 15mm dia bore fancy type swan neck Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed dwon high pressure, with or wothout lettered `Hot\" or `Cold\" with long screwed shanks and fly nuts, screwed for iron pipe. |
| 138 | S&F CP angle cock 15mm cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. |
| 139 | S&F vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed |
| 140 | S&F 32 mm waste coupling of PTMT (half or full threaded) |
| 141 | S&F Grating doom 100mm dia of PTMT (min wt -25gms) |
| 142 | S&F PVC connections 15mm size with PTMT nuts of length 450mm |
| 143 | S&F towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (min wt - 190 gms) |
| 144 | S&F CP wall mixer (3 in 1) complete all as specified |
| 145 | S&F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 146 | M&Lin repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 147 | M&L repair for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 148 | S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 149 | S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 150 | M&L for mild steel works as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 151 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & including 20 mm thick screed bed (bedding layer) in CM 1:4, all as specified & directed by Engineer-in-charge. |
| 152 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 153 | Returning, filling in, including spreading, leveling, watering & well ramming in layer s not exc 25 cm |
| 154 | Removing excavation material n exc. 50m & deposited where directed at a level n exc. 1.5m above the starting point |
| 155 | S&F rotational moulded polyethylene 1000Ltrs Capacity water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified anddirected. . |
| 156 | M&L Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop vulve boxes, gate stops,parts of ranges, bulusters and similar articles exc 5kg each |
| 157 | S&F Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified. |
| 158 | S&F steel work in tubular trusses including (purlins and rafters) special shaped washers etc complete using ERW or induction butt welded tubes . |
| 159 | S&F for depth 0.70m – 1.65 m, DWCPE (SN8) 180 (OD)/163(ID) mmdiameter Pipes laid on 150 mm thick PCC 1:3:6 type C-2 including packing under and haunching against the sides of pipes bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional all as specified and directed. |
| 160 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required. |
| 161 | S&F CP Towel Ring Oval shape as directed by Engr in Charge. |
| 162 | Dismantling boarding any description fixed in any position with nails |
| 163 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed. |
| 164 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed. |
| 165 | Demolition of stone slab and tiles of any description or thickness infloors apron etc laid bedded and pointed in any mortar |
| 166 | Easing of door/windows shutters for easy closing or opening leaf tightening of hinges or changing the position of hinges adjustment of tower bolt, sliding bolt etc complete all as directed. |
| 167 | Taking down chowkats or frames with shutters with exc. 1.5 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) complete all as specified and as directed. |
| 168 | Taking down Chowkhats or frames not exc. 1.5 sq. m each Ditto but with shutters (without taking off shutters from the frames) |
| 169 | Taking down and refixing the door in same opening after easing & adjusting of shutters of any description exc 1 sqm and n exc 2 sqm each, without taking down |
| 170 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all specified and as directed |
| 171 | S&F Rolled sections as in roof truss, purlins including cleatsGDE Fe 410-0-or Fe 310-0. |
| 172 | Demolition of reed, lathing, single or double, including battens and olaster or chicken wire lathing complate all as specified and as directed. |
| 173 | S&F 0.71 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc in walls, ceilings, stanchions, beams etc, including all laps cutting and waste complete all as specified and as directed. |
| 174 | M&L 18 mm thick plastering in CM (1:4) on one side of lathing in two separate layers even and smooth without using extra cement incl WPC (WPC shall be measured and paid separately) |
| 175 | M&L 12 mm thick plastering in CM (1:6) the other side of lathing finished even and smooth without using extra cement |
| 176 | M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed. |
| 177 | M&L 25mm thick Cement concrete type B-0, (1:2:4) (12.5mm graded aggregate) finished even and smooth without using extra cement. |
| 178 | S&F 0.71 mm thickplain aluminium sheeting , alloy 31000 H4 in ridges, hips , valley gutter , drip and straight flashing . |
| 179 | M&L 12mm thick plywood grade BWP type BB fixed with screw to timber frame workcomplete all as specifed and directed. |
| 180 | M&L for rolled sections as in framing for clazing and the like fixed with angles cleats and connecting plates with timber foer eaves board complete all as specified and as directed. |
| 181 | S&F as in replacement mild steel galvanized iron wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 and fixed with tinned tacks or staples complete all as specified and as directed. |
| 182 | S&F Fibre Glass reinforced translucent corrugated sheeting with top corrugations side lap fixed with coach screw and washer in roof, wall etc |
| 183 | M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. |
| 184 | M&L for Brushing neat cement slurrywith 3.0 Kg of cement per Sq meter. |
| 185 | M&L for providing tile adhesive n exc 7 mm thick for laying tiles in floor of ferrouscrete (Ferro-1122)/fevimate SC-Pedilite/Goldstar of Bal Endura or equivalent including levelling the floor if required , for fixing of tile complete. |
| 186 | M&L forthree coats of dry distemper on newly plastered surfaces of walls including preparation of surfaces. |
| 187 | M&L for preparation of old steel surfaces of any description over 10 cm width or girthand applying one coat ofsynthetic enamal paint complete all as specified and as directed. |
| 188 | M&L for preparation of new steel surfaces of any description over 10 cm width or girthand applying two coats ofsynthetic enamal paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 189 | Writing letters or figures with synthetic enamel paint (Block, Roman, Italic or Indian) not exceeding 30cm high over old painted surfacescomplete all as specified and as directed |
| 190 | Taking down AC/Salt glazed ware pipes and fittings upto 100mm |
| 191 | S&F in repair 20mm bore Gun metal gate valve with iron wheel head and gun metal spindle screwed both ends after and including taking up or down old unserviceable valve complete all as specified and as directed.Make : Leader/Audco/Zoloto. |
| 192 | M&L dismantling water tank of exc 500 ltr and not exc 1000 ltr Capacity. |
| 193 | M&L for Precast cement concrete B1 1:2:4 (20mm graded aggregate) as cover slabs for Manholes drains etc including necessary formwork all as specified and directed. |
| 194 | M&L 25mm thick second class hard wood boarding , plained one side with butt joints as ineaves boards . |
| 195 | S&F Anodised aluminium door shutter, aluminium section weighing 0.55 kg/m inluding necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified |
| 196 | S&F Anodised aluminium Window or ventilator shutter, fixed type without sash bar, aluminium section weighing 0.55 kg/m inluding necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified |
| 197 | S&F Expanded metal exc 4 kg, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanished steel staples supplied and fixed complete to wood or steel members |
| 198 | Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 199 | S&F 4 levers brass mortices lock, vertical type, size 100mm |
| 200 | S&F as in replacement 19/20mm dia mild steel chromium plated curtain rods with and including fixing socket complete all as specified and as directed. |
| 201 | Taking down carefullycopper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling,floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed. |
| 202 | M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at sitecomplete all as specified and as directed. Make:- Finolex/Richa/RR KabelMake of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme |
| 203 | Onelight/Call/Exhaust Fan pointcontrolled by one, one way switch . |
| 204 | One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 205 | One 3 pin socket outlet 5 Amps on the Independent board. |
| 206 | All as per item No-202.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. |
| 207 | M&L for Switch piano flush type single pole, one way 5AMake:- Havells/Legrand/Anchor |
| 208 | M&L for Socket outlet, 2 in 1, 3 pin 5A flush type Make:- Havells/Legrand/Anchor |
| 209 | M&L Switch socket combination 2 in 1, 5A flush typeMake:- Havells/Legrand/Anchor |
| 210 | M&L Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush typeMake:- Havells/Legrand/Anchor |
| 211 | M&L for stepped type electronic fan regulator 100 W socket size flush type on the existing phenolic laminated sheet etc.Make:- Havells/Legrand/Achor |
| 212 | M&L for bell push switch 5 amp flush type. Make:- Anchor/Legrand/Kinjal |
| 213 | M&L for Bell, AC, 230 Volts, single pole Make:- Anchor/Legrand/Kinjal |
| 214 | M&L for (concelaed Type) point wiring including necessary chese cutting of wall for one light/fan/call bell point with 1.5 sqmmPVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts gradecontrolled by one way switchincluding 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit with all accessoriesand sunk modular GI box for mounting of fittings like switch, socket and fan regulator with modular inner plate and cover plate and making good the distrubed surfaces as per the existing complete all as specified and as directed by the Engr-in-Charge. Note: A. Red coloured cable shall be used for live connection,black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.B. The Rate of point wiring includes the following :-(i)Copper wire(ii)PVC Conduit with accessoreis(iii) Chase cutting(iv) other accessories such asmodular GI box, modular inner plate and modularCover plate etcMake of wire : Richa/RR Kabel/Finolex Make of PVC Conduit: Supreme/ Ori-Plast/ finolex |
| 215 | Onelight/Call/Exhaust Fan pointcontrolled by one, one way switch . |
| 216 | One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 217 | One 3 pin socket outlet 5 Amps on the Independent board. |
| 218 | One light point controlled by Two way switch with cable 1.5 Sqmm |
| 219 | All as per item No-211.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. |
| 220 | M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed. Make:- Havells/Legrand/Achor |
| 221 | M&L for Modular Switch 1 way 6A,1 moduleMake : Havells/Legrand/Anchor |
| 222 | M&L for Modular Switch 2 way 6A,1 moduleMake : Havells/Legrand/Anchor |
| 223 | M&L for modular switch 1 way 16A, 1 module Make : Havells/Legrand/Anchor |
| 224 | M&L for Modular Socket ,6A/2/3 pin combined 2 module Make : Havells/Legrand/Anchor |
| 225 | M&L Modular Socket ,6A/16A-2/3 pin combined 2 module Make : Havells/Legrand/Anchor |
| 226 | M&L for Modular Stepped type electronic fan regulator,120 W-2 module Make : Havells/Legrand/Anchor |
| 227 | M&L for modular metal flush box 3 module complete all as specified and as directed |
| 228 | M&L for modular metal flush box 6 module complete all as specified and as directed |
| 229 | M&L for modular white cover plate with frame 3 module complete all as directed. |
| 230 | M&L for modular white cover plate with frame 6 module complete all as directed. |
| 231 | Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of6 Sq mm and one run of 6 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 6 Sq mm + one run of 6 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length.Make:- Finolex/Richa/RR KabelMake of caping/casing :- Prestoplast/Finolex/supreme |
| 232 | Taking down M&L for sub main wiring with two runs of 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughconcealed conduit including complete all as specified and as directed. NOTE:- Two runs of 4.0 Sq mm +one run of 4.0 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length. |
| 233 | S&F for, IP>= 20, Class I, LED light fitting 1 x20 W (4 FT), 240V, PF-0.9, CRI == 80, CT>= 6000 K, wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl flexible hose from ceiling rose to fitting complete all as specified and as directed.Make : Crompton Greaves Cat Part No : CCS-102-20-SL-DP-NWH/Bajaj/Philips |
| 234 | All as per item No 226.00 above but10 wattLED, 2\" batten, Wall mountedwith polycarbonate housing/ batten. Make Havells Cat No LHEXBQP5IN1W009 or equivalent in Bajaj/Philips |
| 235 | M&L for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings incl taking down old unsv light fitting. Make :Anchor/Legrand/Kinjal |
| 236 | M&L for decorative wall mounted light fitting made up of polycarbonate including 9 watt LED lampwith B-22 base complete all as specified and directed.Make : CG/Bajaj/Philips/Havells |
| 237 | Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 20 watts, CRI > 70, Power factor > 1.95, colour temp 5700 K, Luminous effieciency not less than 100 lumen/watt, 6000 Lumens output, IP-66 protection including electronic driver (SMPS based constant current supply with < 10% THD, output open/short circuit protection, phase to phase protection, over voltage protection, surge voltage protection etc) unit suitable for working volt 140-270 V AC, 50 Hz, pressure die cast aluminium housing and finishing epoxy white powder coated grey colur after phospho chromate treatment with all accessories and connecting up complete and all as specified and directed by Engr-in-Charge. (Note : Test certificate in support of the technical parameters of the light fittings is to be submitted in original to the Engr-in-Charge by the contractor.) Make : CG, Cat No- LSTS-20-CDL-M/ Bajaj/ Philips |
| 238 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.Make : CG/Havells/Usha |
| 239 | S&F for fixing Exhaust fan, Plastic,AC single phase 230/ 240 volts of size 250 mm sweep with louvre shutter including anchor bolt of suitable size for fixing arrangement and connecting upwith three core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed.Make : Bajaj/CG/Orient |
| 240 | M&L for MCB Distribution board double door type TPN 8 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. for fixing MCBs of various rating capacityincluding taking down old unsv MCB DBs complete all as specified and as directed. Make : Legrand Cat Part No 507782/ABB/ Siemens |
| 241 | M&L for MCB TPN 63 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB \"C\" seriesincl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand Cat No 408702 or equivalent in ABB/Siemens |
| 242 | M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacityincluding taking down old unsv MCB DBs complete all as specified and as directed. Make:- Legrand Cat No 507611 or equivalent in ABB/Siemens |
| 243 | M&L for MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacityincluding taking down old unsv MCB DBs complete all as specified and as directed. Make:- Legrand Cat No 507611 or equivalent in ABB/Siemens |
| 244 | S&FMCB SPN 63 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioningincl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand Cat No 408636 or equivalent in ABB/Siemens |
| 245 | S&FMCB SPN 32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioningincl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand Cat No 408636 or equivalent in ABB/Siemens |
| 246 | S&FMCB SP 6-32 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioningincl taking down old unsv MCB complete all as specified and as directed.Make:- Legrand Cat No 408587-95 or equivalent in ABB/Siemens |
| 247 | M&L for metal clad AC socket point single pole and neutralenclosure with a tow pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed. Make: Havells/HPL/Legrand |
| 248 | S&F LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver,holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. with all accessories internally pre wired complete all as specified and directed.Make : CG Part No LCTLRN-36-FO-CDL or equivalent in Bajaj/Phipips. |
| 249 | Taking down LT UG cable/ service connection of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.Make : Richa/Finolex/Havells |
| 250 | Taking down LT UG cable/ service connection of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 4 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.Make : Richa/Finolex/Havells |
| 251 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified ans as directed. |
| 252 | Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified ans as directed. |
| 253 | Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified ans as directed. |
| 254 | M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken. |
| 255 | M&L for laying brick sub class \"B\" old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed |
| 256 | Taking down Ceiling fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, painting of fans complete with superior quality synthetic enamel paint by spraying including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades,hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed. |
| 257 | M&L for rubber bush with clamping set, comprising GI bolt, nut and split pin complete all as specified and as directed. |
| 258 | M&L for replacement of capacitor2.5 Mfd incl making electrical connection complete all as specified and as directed. |
| 259 | M&L for replacement of steel ball bearing/bush of suitable size compatible to the existing ceiling fan complete all as specified and as directed. |
| 260 | M&L for copper rewinding for suitable size complete to the existing ceiling fan complete all as specifed and as directed. |
| 261 | S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.(Make-HAVELLS/ CG/BAJAJ/USHA/) |
| 262 | Supply & laying tubes \" Medium grade\" galvanised, with all fittings, fixed complete to walls,poles, ceilings for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed. Make:- Jindal/TATA/Prakash surya |
| 263 | M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. |
AI Tender Summary
Tender Timeline
Jul 02, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 18, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender