Construction Of Kitchen Shed, Park And Installation Of High Mast Light At Mata Pangwa Temple Hottar. ( Civil Work )
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Jul 2022
0 days left
EMD
20400
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
lakhanpur → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Kitchen Shed, Park And Installation Of High Mast Light At Mata Pangwa Temple Hottar. ( Civil Work )
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed in All kinds of soils. |
| 2 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with : ( Incl; all carriages lead and lifts.) |
| 4 | a) 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 5 | b) 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 6 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) ( Incl; all carriages lead and lifts.) |
| 7 | CAST-IN-SITU Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level |
| 9 | Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete ( Incl; all carriages lead and lifts.) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 11 | a) Foundations, footings, bases of columns etc. for mass concrete. |
| 12 | b)Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 13 | c) Columns |
| 14 | d)Suspended floors (sloping), roofs, landings, balconies and access platforms |
| 15 | e)Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 16 | Providing and laying matt finished vitrified tile of specified size having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge. 300x300x9.8 mm |
| 17 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 18 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded tube type including all carriages and head loads included as per directions of the Engineers |
| 19 | Supplying and filling in plinth with fine sand/ RBM under floors including, watering, ramming, consolidating and dressing complete |
| 20 | Filling with availableearth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer -in - charge. |
| 21 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. |
| 22 | Providing and fixing 3 seater RCC Garden benches all work as per directions ofengineer -in -Charge. |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade |
| 24 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 25 | Providing and fixing retro-reflective sign board ( 6\" x4\" ) made up of M.S. Pipe frameACP sheet on both sides with retro-reflective writting , stand made up of 50mm dia G.I pipe inclearthwork & embedding in cement concrete 1:2:4 ( all work as per direction of engineer-in-Charge) |
AI Tender Summary
Tender Timeline
Jul 02, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 09, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender