Electrical Work Under Electricity Distribution Division Chandasusi- 1 Carriage Of Following Materials From Store Chandausi To Work Site Includingloading And Unloading Also Handling A Both End ( Distence Within A Radiaus About 10Kms ) 2 Pcc Pole 8.5 M

Sharing tender

Electrical Work Under Electricity Distribution Division Chandasusi- 1 Carriage Of Following Materials From Store Chandausi To Work Site Includingloading And Unloading Also Handling A Both End ( Distence Within A Radiaus About 10Kms ) 2 Pcc Pole 8.5 Mtr Long 3 New 250 Kva Transformer 11 / 0.4 Kv 4 Abc ( 3X120+1X95+1X16 ) Sq Mm And Other Line Materials 5 Acsr Weasel Conductor And Other Line Materials 6 Al. Lt 1X240 Sq. Mm Cable 7 Digging Of Pits Upto 1 / 6Th Of Pole In 180X120x120 Cms Size For Pcc Poles.Fitting Of All Accessories I.E Suspension Clamp, Dead End Clamps Etc & Fitting Of All Type Of Clamps With Nut And Bolts And Washers Etc. As Per Respo Norms And Its Errection Complete In All Respect. 8 Pcc Pole 8.5 Mtr Long 9 Grouting Of Supports In Cc 1:4:8 ( Cement, Sand & 40Mm Brick Ballast ) Grouting Will Be Done In The Block Of Size ( 450X450 ) Mmx1 / 6Th Of Full Lenthe Of The Supprot Up To Ground Level, 300Mm Plinth Above The Grount Level With Cc 1:3:6 ( Cement Cours Sand And Stone Grit ) With Muffing As Per Drawing Work Includes Back Filling And Proper Ramming. 10 Pcc Pole 8.5 Mtr Long 11 Grouting Of Stay Rods ( 16X1800 ) Mm Including All Works Of Excavation, Cement Concrete In Size ( 0.60X0.60X0.30 ) Mm In Ratio 1:4:8 Cement, Sand, 40Mm Brick Ballast ) As Per Drg. Including Back Filling Of Soil And Proper Ramming Etc. 12 Fixing Tightning & Nozzling Of Stay Wire With Stay Rod With The Poles Of Required Tension As Per Drawing, Including Providing & Fixing Of Stay Insulator Of 11 Kv Lt Nd Stay Clamps. 13 Earthing Of Pcc Poles As Per Respo Norms 14 Laying, Sraingin, Sagging And Binding Of Acsr Weasel And Ab Conductor On Poles 15 Making Plinth Of Tf Size2x2x1.5 Mtr ( Cement, Fine Sand, Coarse Sand, Brick Ballast, 1St Class Bricks, 40Mm Stone Ballast, Ms Channel 125X65 Mm, Ms Twisted Bar Of Size 20Mm ) 16 Earthing Of 250 Kva Tf Up To Water Level 17 Installing Of 250 Kva Tf On New Contructed Plinth And Also Making The Connection To 11Kv 18 Supply Of Materials ( All Material Arrange By Contractor ) 19 Holding Clamps 20 Nut Bolts 21 Al. Crimping Lug 22 Al. Flat