Military Engineer Services-MES has published Repair / Maintenance And Servicing Of Ceiling, Exhaust, Wall Mounting, Pedestal Fans, Central Ac Plants And Equipments Misc Items And Street Lights , Garden, High Mask, Street Light Panel, Street Light Etc At Irde Area Under Ge ( I ) R N D Dehr. Submission Date for this Tender is 30-07-2022. Street Lighting Tenders in dehradun Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Jul-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-07-2022 |
| Sl. No. | Item Description |
| 1 | Disconnecting , taking down & removing carefully the existing ceiling fanetc. of any description, any sweep and from any position / locations (i.e. Md Accn/ OTM Accn/ Md Hostel/ Workshop/ Installations) for repairs / servicing / overhauling /numbering etc., dismantling & opening of the fans, checking serviceability of parts, overhauling by necessary cleaning, oiling & greasing , fixing the serviceable parts in position, removing & replacement of defective/ unserviceable parts, if any, with new parts, reassembling the fans, making necessaryadjustment and proper alignment of blades, hanging / fixing the repaired fans in position, connecting to existing electric sources and testing at site to the entire satisfaction of complete, all as specified and directed. |
| 2 | Disconnecting , taking down & removing carefully the existingexhaust fans etc. of any description, any sweep and from any position / locations (i.e. Md Accn/ OTM Accn/ Md Hostel/ Workshop/ Installations) for repairs / servicing / overhauling / painting / numbering etc., dismantling & opening of the fans, checking serviceability of parts, overhauling by necessary cleaning, oiling & greasing , fixing the serviceable parts in position, removing & replacement of defective/ unserviceable parts, if any, with new parts, reassembling the fans, making necessaryadjustment and proper alignment of blades, hanging / fixing the repaired fans in position, connecting to existing electric sources and testing at site to the entire satisfaction complete, all as specified and directed. |
| 3 | Disconnecting,taking down and removing carefully the existing table fan, Air circulator wall mounting fan,pedestalfan, of any description, any sweep and from any position / locations for repairs / servicing / overhauling / painting / numbering etc., dismantling & opening of the fans, checking serviceability of parts, overhauling by necessary cleaning, oiling & greasing , fixing the serviceable parts in position, removing & replacement of defective/ unserviceable parts, if any, with new parts, reassembling the fans, making necessaryadjustment and proper alignment of blades, connecting the fans to existing electric sources and testing at site to the entire satisfaction of Engineer-in-Charge complete, all as specified and directed. Note for item 1 to item 3 here in before : (i) The replacement of defective / nonfunctional parts shall be measured & paid for separately as “Supply only” under appropriate item of Sch ‘A’ and fixing charges for new items are deemed to be included under this item. (ii) Burnt out windings replaced, shall be measured and paid for separately under appropriate item of Sch ‘A’ for rewinding. (iii)The rates for above items are deemed to include for transportation to & fro of fans to workshop if required and approved by the Engineer-in-charge for necessary repairs. (iv)Cost of minor repair i.e. loose connection tightening, oiling greasing, tightening nut- bolts, insulating wire etc deemed to be inclusive in the item rate above. (v) Writing of fan No. and painting of fans shall be measured and paid for separatelyunder appropriate item of Sch ‘A’ Supply only the following new parts suitable for the ceiling/ exhaust fans, wall bracket fans & pedestal fans, air circulating fans etc. of any description, measured and paid as supply only fixing & testing charges of these items are deemed to be included in the rates quoted by the tenderer for Sch ‘A’ item No. 01 and 03 above |
| 4 | Supplying only ball bearing No 6200 (Make SKF/NRB/NBC) |
| 5 | Supplying only ball bearing No 6201 (Make SKF/NRB/NBC) |
| 6 | Supplying onlyball bearing No 6202 (Make SKF/NRB/NBC) |
| 7 | Supplying only ball bearing No 6203 (Make SKF/NRB/NBC) |
| 8 | Supply only gun metal bushes of any description and size to suit existing motor shaft. |
| 9 | Supplying only capacitor of capacity 2.5 mfd(PVC body) (Make:- EPCOS/JYOTI/ USHA) |
| 10 | Supplying only capacitor of capacity 4 mfd(PVC body) (Make:- EPCOS/JYOTI/USHA) |
| 11 | Supply only complete hanging assembly set comprising with rubber reel, MS clamps, nuts,bolts with lock pins suitable for any type of fans & down rods of length 300mm. |
| 12 | Supplying only aluminium cast metal fan blade assembly with necessary MS nuts, bolts & washers suitable for ceiling fans of any descriptions & of 1200/1400 mm sweep.Note: (i) Set of three blades shall be measured as one unit (ii) Make of the blade assembly shall be as approved by GE |
| 13 | Supplying only PVC fan blade assembly with necessary MS nuts, bolts & washers suitable for exhaust fans of any descriptions & of 230 mm sweep.(Note: Set of three blades shall be measured as one unit and make of assembly shall be as approved by GE.) |
| 14 | Supplying only aluminium cast metal fan blade assembly with necessary MS nuts, bolts & washers suitable for exhaust fans of any descriptions & of 300/450 mm sweep.(Note: Set of three blades shall be measured as one unit and make of assembly shall be as approved by GE.) |
| 15 | Supplying only aluminium cast metal fan blade assembly with necessary MS nuts, bolts & washers suitable for air circulator/wall mounting/table ans of any descriptions & of 400/610 mm sweep.(Note: Set of three blades shall be measured as one unit and make of assembly shall be as approved by GE.) |
| 16 | Supply only PVC insulated and sheathed, round flexible cable, three core of size 0.50 Sqmm with copper conductor in pieces for connecting fans.( Make :Havell’s / Finolex / Gloster / National/ Plaza ) |
| 17 | Supply only MS nuts & bolts with one hole washer & lock pin of suitable size for hanging assembly complete. |
| 18 | Supply only rubber reel bushof suitable size of hanging assemblycomplete. |
| 19 | Supply only MS tube medium grade 15mm dia duly finished with white colourtwo coats over a coat of red oxide cutting in desired length from 300mm to 1500mm, cutting slot and drilling hole for down rod of fan complete all as specifieda and directed. |
| 20 | Taking out & removing old burnt-out windings of electric fans of any description and rewinding of fan motor with appropriate size super enameled copper wire (Make : Atlas/Finolex/Devi Dayal)as approved by the Engineer-in-charge including insulating material such as illuminous paper, Letherized paper, cotton tape, glass sleeving, insulating varnish etc testing at workshop and transportation to site, connecting and testing on full load to the entire satisfaction for the following size of fans:- |
| 21 | Rewinding of motor of ceiling fans 1200 mmsweep. |
| 22 | Rewinding of motor of ceiling fans 1400 mmsweep. |
| 23 | Rewinding of motor of exhaust fan of 230/300 mm sweep. |
| 24 | Rewinding of motor of wall mounted fan of 400 mm sweep. |
| 25 | Rewinding of motor of air circulating fan of 610 mm sweep. |
| 26 | Rewinding of motor of table fan/ pedestal fan of 400 mm sweep. |
| 27 | Taking down existing worn out louversof any description , in any position and supplying & fixing new louvers made out of MS sheet 22 gaugethick suitable for exhaust fan of 230/300mm sweepcomplete all as specified & directed ( Note: The louvers shall be of shape, size and pattern as approved by the Engineer-in-Charge duly painted with two coat of synthetic enamel paint over a coat of red oxide primer) |
| 28 | Taking down existing worn out louversof any description , in any position and supplying & fixing new louvers made out of MS sheet 22 gaugethick suitable for exhaust fan of 450mm sweep complete all as specified & directed ( Note: The louvers shall be of shape, size and pattern as approved duly painted with two coat of synthetic enamel paint over a coat of red oxide primer) |
| 29 | Disconnecting & taking out old existing unserviceable ceiling fan regulator of any description & in any position / location and Supply and fixing ceiling fan regulator electronic, step type suitable for ceiling fans of any capacity, pre-wired 230 volts AC 50Hz supplycomplete all as specified & directed.(Make :- Anchor/Cona/Leader) |
| 30 | Disconnecting and taking out old existing unserviceable ceiling fan modular regulator of any description and in any position/ location and supply and fixing ceiling fan modular regulator electronic, step type, 1M size modular type , suitable for ceiling fans of any capacity, pre-wired 230 volts AC 50Hz supplycomplete all as specified and directed. (Make :- Anchor/Cona/Leader) |
| 31 | Disconnecting & taking out old existing unserviceable ceiling fan modular regulator of any description & in any position / location and Supply and fixing ceilingfan modular regulator electronic, step type, 2M size piano type, suitable for ceiling fans of any capacity, pre-wired 230 volts AC 50Hz supply 100Watt complete all as specified & directed.(Make :- Anchor/Cona/Leader) |
| 32 | M & L for painting of existing fans of any description of ceiling fan of 1200/1400mm sweepwith applying one coat of synthetic enamel paint (White) by spray machine including preparation of existing decorated surfaces of fans including numbering etc, complete, all as specified and directed. |
| 33 | M & L for painting of existing fans of any description of exhaust fan of 230/300/450mm sweep with applying one coat of synthetic enamel paint grey by spray machine including preparation of existing decorated surfaces of fans including numbering etc complete, all as specified and directed. |
| 34 | M & L for painting of existing fans of any description Air circulators of 610 mm sweep with applying one coat of synthetic enamel paint (White) by spray machine including preparation of existing decorated surfacesincluding numbering et ccomplete all as specified and directed. |
| 35 | Supplying and fixing GI tubing 40mm, medium grade for hanging of ceiling fans including cutting holes in walls built in cement mortar and making good in cement sand mortar 1:4 and finish the surface to match with existing all as specified and directed. |
| 36 | Disconnecting, dismantling and taking out the non-functional Air conditioner window type of any description, any make and in any position, 1.5 TR/2 TR capacity, single phase, 50 Hz, strip opening, cleaning and servicing of the AC with usingcaustic soda/detergent powder solution, checking serviceability of wiring & parts,painting the bottom with one coat of black synthetic enameled paint,brazing, reassembling and testing of the ACcomplete, all as specified and directed by Engr-in-Charge. |
| 37 | Disconnecting, dismantling and taking out the existing Air conditioner Split type of any description, any make and in any position 1.5 TR/2 TR capacity,both indoor and outdoor unit single phase, strip opening , cleaning and servicing of the AC with using caustic soda/detergent solution, cleaning of suction air filter and coil of indoor unit and brazing the discharge and suction line, reassembling, fixing and testing of the AC complete all as specified and directed. Note:(Applicable for Sch ‘A’ Item No. 30 & 31).(i) Window/Split type AC"s shall be taken from department on "as and where installed" basis. (ii) Window/Split type AC"s are to be maintained for heating as well cooling , where this provision is in the machine. (iii) The spare parts measured & paid separately as supply only rates. Rate for fixing of spare parts (ie compressor, condensing coil, cooling coil & blower motor) under relevant items shall be included in item No 30 & 31). (iv) The contractor shall ensure and asses at the site any initial maintenance required, to make the allWindow/Split type AC"s in proper working condition, at the time of taking over and he shall be laible to make all listed handed over units functional.(ii) Charging of gas, if required, shall be measured and paid for separately under appropriate item of Schedule `A". However, vacuum and pressure leakage testing with nitrogen (N2), if any required, is deemed to be included under the unit rate quoted by the contractor for this item. |
| 38 | Supply only repaired compressor sealed unit of suitable capacity/ model in the unit properly for 1.5/2.0 TR window/Split type AC complete, all as specified and directed(Make : EMERSON COPELAND /L.G / HITACHI / TECUMSEH ) |
| 39 | Supply only new Rotory type compressor sealed unit of suitable capasity/ model in the unit properly for 1.5 TR window/Split type AC complete, all as specified and directed. (Make : EMERSON COPELAND /L.G / HITACHI / TECUMSEH ) |
| 40 | Supply only new Rotory type compressor sealed unit of suitable capasity/ model in the unit properly for 2.0 TR window/Split type AC complete, all as specified and directed (Make : EMERSON COPELAND /L.G / HITACHI / TECUMSEH ) |
| 41 | Supply only new condensing coil unit for window type AC of any type/ any capacity complete, all as specified and directed (Make : EMERSON COPELAND /L.G / HITACHI / TECUMSEH ) |
| 42 | Supply only new condensing coil unit for Split type AC of any type/ any capacity complete, all as specified(Make : EMERSON COPELAND /L.G / HITACHI / TECUMSEH ) |
| 43 | Supply only blower motor including fan blade, capacitor complete suitable for Window type AC 1.5 ton/2.0 ton capacity 1/5 HP, 220 Volts, single phasecomplete,all as specified and directed. |
| 44 | Supply only blower motor including fan blade, capacitor complete suitable for split type AC 1.5 ton/2.0 ton capacity 1/8 HP, 220 Volts, single phasecomplete,all as specified and directed. |
| 45 | Supply only cooling coil unit for window type AC of any type/ any capacity complet, all as specified and directed. |
| 46 | M&L for charging refrigerant gas in the system of window/Split type AC of 1.5/2.0 ton capacity all as directed(Note : The refrigerant gas measured and paid separately under relevant items as applicable as ‘supply only’). |
| 47 | M&L for replacement of unserviceable door Invertor type PCBsuitable for 1.5/2.0 TRsplit type AC complete, all as specified and directed. (Make : Blue Star / Alloyds ) |
| 48 | M&L for replacement of unserviceable running capacitor 36/45/50 MFD 230 V for window/Split type AC 1.5 Ton/2.0 Ton capacity complete, all as specified and directed.Make : Universal/Sarda ) |
| 49 | M&L for replacement of unserviceableindoorInvertor type PCBsuitable for 1.5/2.0 TRsplit type AC complete, all as specified and directed.(Make : Blue Star / Alloyds ) |
| 50 | M&L for replacement of unserviceable Relay (1622) suitable for window/Split type AC 1.5 Ton/2.0 Ton capacity complete, all as specified and directed. |
| 51 | M&L for replacement of unserviceable thermostat suitable for window type Ac 1.5 ton/2.0 ton capacity complete, all as specified and directede. (Make : Indofoss or other equivalent as approved). |
| 52 | M&L for replacement of unserviceable capillary tube and stainer for window/Split type AC of 1.5 ton/2.0 ton capacity complete, all as specified and directed. |
| 53 | M&L for replacement of unserviceable operation knob fro window type AC 1.5 ton/2.0 ton capacity complete, all as specified and directed. |
| 54 | M&L for replacement of unserviceable PVC air filter for window type AC of 1.5 ton/2.0 ton capacity complete, all as specified and directed. |
| 55 | M&L for replacement of unserviceable PVC air filter for Split type AC of 1.5 ton/2.0 ton capacity complete, all as specified and directed. |
| 56 | M&L for replacement of unserviceable capacitor for blower motor suitable for window /Split type AC 1.5 ton/2.0 ton capacity complete, all as specified and directed. |
| 57 | M&L for replacement of unserviceable fan blade for blower motor suitable for window /Split type AC 1.5 ton/2.0 ton capacity complete, all as specified and directed. |
| 58 | M&L for replacement of unserviceable swinging motor with louvers as per existing make for Split type AC 1.5 ton/2.0 ton capacity complete, all as specified and directed. |
| 59 | M&L for replacement of unserviceable remote control assembly with PCB plate complete with connections suitable for Split AC 1.5TR/2TR singlephase capacity complete all as specified and directed .(Make : Carrier/Hitachi/LG ) |
| 60 | M&L for replacement of unserviceable LCD / LED display unit for Window/split type AC 1.5 / 2.0 ton capacity complete, all as specified and directed. |
| 61 | M&L for replacement of unserviceable 15/20 mm bore PVC flexible conduit complete, all as specified and directed. |
| 62 | M&L for replacement unserviceable wiring for AC window type /split type1.5 ton/2.0 ton capacity and rewiring with suitable size multi stranded copper cable including testing, checking etc complete, all as specified and directed. |
| 63 | Supply and fixing in replacing refrigerant copper tubing5/8" / 1/2" / 3/8" / 1/4" dia (as per existing one) with 22 gauge , fixed on wall / ceiling with saddle as per site requirement including making joints by brazing / flairing and checking for any leakage complete, all as specified and directed. |
| 64 | Supply and fixing in replacment foam type insulation sleeve for copper tubing5/8" / 1/2" / 3/8" / 1/4" dia (as per existing one) binding and securing the insulation firmly with copper tubing as per site requirement complete, all as specified and directed. |
| 65 | M&L for replacement of unserviceable reverse cycle valve in window/Splittype AC of 1.5 / 2 TR cap. and welding, brazing with copper tubing and testing complete all as specified and directed.Make : Renutrol/Pacific |
| 66 | M&L for replacement of unserviceable PVC insulated PVC sheathed 1.5 Sqmm, 3 core copper cable 1100 Volts confirming to IS complete, all as specified and directed(Make : KDK/Nicco/Finolex/Havells) |
| 67 | M&L for replacement of unserviceablePVC insulated PVC sheathed 2.5 Sqmm, 3 core copper cable 1100 Volts confirming to IS complete, all as specified and directed . (Make : KDK/Nicco/Finolex/Havells) |
| 68 | M&L for dismantling of storage type water cooler of 40/80/150 ltrs capacity of existing modelin various location, shifting to MES Yard for repair/replacement of unserviceable spares and painting the outer body (including replacement of corroded sheet with new one) by spraying enamel paint and sticking a stickermentioning the “No, Date of overhauling, Due date, CA No., Contractor’s name, user’s signature’ reassembling, testing, checking and shifted to existing location, fixing the same by nut, bolt, angle iron structure and masonry work complete, all as specified and directed .(NOTE: The spare parts ( ie compressor, blower motor) measured & paid separately as supply only rates.Rates for fixing of spares parts under the unit rate quoted by the contractor for this item. |
| 69 | Supply only new compressor sealed unit of 40/80 ltrs capacity of existing modelin the unit properly for storage type water cooler of any type complete, all as specified and directed. (Make : EMERSON COPELAND /L.G / HITACHI / TECUMSEH ) |
| 70 | Supply only new compressor sealed unit of 150 ltrs capacity of existing modelin the unit properly for storage type water cooler of any type complete,all as specified and directed. (Make : EMERSON COPELAND /L.G / HITACHI / TECUMSEH ) |
| 71 | Supply only blower motor including fan blade, capacitor complete suitable for 40/80 ltrs capacity, 220 volts, single phase complete, all as specified and directed. |
| 72 | Supply only blower motor including fan blade, capacitor complete suitable for 150 ltrs capacity, 220 volts, single phase all as specified and directed. |
| 73 | Supply only new condensing coil unit suitable for 40/80 ltrs capacity, 220 volts, single phase complete, all as specified and directed. |
| 74 | Supply only new condensing coil unit suitable for 150 ltrs capacity, 220 volts, single phase complete, all as specified and directed. |
| 75 | M&L for charging refrigerant gas in the system of water cooler of any capacity complete, all as directed. (Note : The refrigerant gasmeasured and paid separately under relevant items as applicable as supply only). |
| 76 | M&L for replacement of unserviceable capillary tube and stainer for storage type water cooler of 40/60/150 ltrscapacity complete, all as specified and directed. |
| 77 | M&L for replacement of unserviceable overload protection coil 230 volts for water cooler of 40/60/150 ltrscapacity complete, all as specified and directed. |
| 78 | M&L for replacement of unserviceable relay suitable for water cooler of 40/60/150 ltrs capacity complete, all as specified and directed. ( Make : Indfoss / Usha / Arvind) |
| 79 | M&L for replacement of unserviceable thermostat suitable for water cooler of 40/60/150 ltrscapacity icomplete, all as specified and directed.(Make : Indfoss/Asian). |
| 80 | M&L for replacement of unserviceable starting capacitor 80/100 MFD 230 Volts AC for water cooler of capacity 40/60/150 ltrs complete, all as specified and directed(Make : Indfoss/Sarda ) |
| 81 | M&L for replacement of unserviceable running capacitor suitable for water cooler of capacity 40/60/150 ltrscomplete, all as specified and directed. (Make : Indfoss/Sarda). |
| 82 | M&L for replacement of unserviceable fan blade for water cooler of 40/60/150 ltrscapacity complete, all as specified and directed. |
| 83 | M&L for replacement of unserviceable capacitor for blower motor suitable for water cooler of 40/60/150 ltrscapacity complete, all as specified and directed. |
| 84 | M&L for replacement of unserviceable internal wiring of AC, water cooler, refrigerator of any capacity and rewiring the same with 2.5 Sqmm size multi stranded copper cable incl testing checking etc complete, all as specified and directed. |
| 85 | M&L for replacement of head cover gasket for water cooler of 40/60/150 ltrs capacity complete, all as specified and directed. |
| 86 | M&L for dismantling of storage type refrigerator/freezers of 165/212/310 ltrscapacity in various location, shifting it to MES yard for repair/replacement of unserviceable spares and painting the outer body (including replacement of corroded sheet with new one) by spraying enamel paintand eassembling, testing, checking and shifted to existing location including masonry work complete, all as specified and directed.(NOTE: The spare parts ( ie compressor, cooling unit ) measured and paid separately as supply only rate.Rates for fixing of spare parts under the unit rate quoted by the contractor for this item. |
| 87 | Supply only new compressor seal unit of 165/212 ltrs capacity of existingmodel in the unit properly for domestic refrigerator/freezers of any type all as specified and directed |
| 88 | Supply only new compressor seal unit of 310 ltrs capacity of existingmodel in the unit properly for domestic refrigerator/freezers of any type all as specified and directed. |
| 89 | Supply only freezer coil unit for domestic refrigerator of any type/ any capacity complet, all as specified and directed. |
| 90 | M&L for charging refrigerant gas in the system of domestic refrigerator of any type/ any capacity complete, all as directed. (Note : the refrigerant gasmeasured and paid separately under relevent items as applicable as supply only ). |
| 91 | M&L for replacement of unserviceable capillary tube and stainer for any type and capacity complete fordomestic refrigerator/freezer,all as specified and directed. |
| 92 | M&L for replacement of unserviceable timer/bimetallic relay of existing type for domestic refrigerator/freezer, all as specified and directed. |
| 93 | M&L for replacement of unserviceable over load relay for domestic refrigerator/freezer of any type/ any capacity complete, all as specified ans directed. |
| 94 | M&L for replacement of unserviceable thermostat for domestic refrigerator/freezer of any type/any capacity complete, all as specified ans directed. |
| 95 | Supply only refrigerant gas R-22. |
| 96 | Supply only refrigerant gas 134A. |
| 97 | Supply only refrigerant gas R-407/R-410/R-32 (HYDRO CARBON) |
| 98 | M&L for replacement of angular valve of size 1/2" suitable for split type AC complete. all as specified &directed. |
| 99 | M&L for replacement of angular valve of size ¼" suitable for split type AC complete. all as specified & directed. |
| 100 | M&L for replacement of angular valve of size 5/8" suitable for split type AC complete. all as specified & directed. |
| 101 | M&L for replacement of angular valve of size 3/8" suitable for split type AC complete. all as specified & directed. |
| 102 | Supply only Remote control for split/ Window type AC of LG/Samsung/existingmake of 1.5 TR/2 TR with battery complete,all as specified & directed. |
| 103 | M & L for dismantling of unserviceable voltage stablizer of capacity 3 KVA/4 KVA/5 KVA in various location for repair/replacement of unserviceable parts, cleaning, servicing, checking, reassembling, testing and handed over to MES in serviceable condition complete,all as specified & directed.(Note :- The spare parts measured and paid separately as supply only rates. Rates for fixing of spare parts under relevant items shall be included in item) |
| 104 | Supply onlytransformer copper wound ofvoltage stabilizerAC, Single Phase, 230 volts of capacity 3/4/5 KVA of approved make complete all as specified and directed.. |
| 105 | Supply only relay 12/24 volts suitable for 3/4/5 KVA voltage stabilizer AC, Single Phase, 230 volts of approved make complete all as specified and directed. |
| 106 | Supply only electromechanical type voltmeter 0 to 300 volts Single Phase , AC,65 mm square/round for stabilizer as per requirement complete all as specified & directed. Make – AE or equivalent approved. |
| 107 | Supply only DC electronic circuit for relay of capacity 24/12 volts stabilizer for3 to 5KVA of approved make complete all as specified & directed. |
| 108 | Supply only 3 way connector 230 volts 50 Hz AC, 32 Amp of approved make & existing shape and size complete all as specified and directed. |
| 109 | Supply only toggle switch 20/30 Amp two way of approved makecomplete all as specified and directed. |
| 110 | Installation only split type AC including indoor/outdoor unit of capacity 1.5 Ton/2 Tonafter carried out the repair under item No.2atnew location as directed including providing necessary chiseling/ cutting for fix the indoor/outdoor unitby means of suitable size of nut, bolt, angle iron structure, masonry work and making good the disturbed surface withPCC, plastering,white wash works,testing & checking complete,all as directed & specified. (Note :- The spare parts measured & paid separately as supply only rates. Rate for fixing of spare parts (ie compressor, condensing coil, blower motor and nut bolt angle iron structure) under relevant items shall be included in this item) complete. all as directed |
| 111 | Supply &Fixing in replacement of unserviceable Oudoor unitbody complete with out compressor unitsuitable for existing Split type AC of 1.5 TR capacity, complete,all as specified & directed. |
| 112 | Supply &Fixing in replacement of unserviceableindoor unitbody complete suitable for existing Split type AC of 1.5 TR capacity, complete,all as specified & directed. |
| 113 | Supply &Fixing in replacement of unserviceablemild steel work as split type AC outdoor/watercooler wheel stand /supporting /protection cage etc. ofsuitable size of flat iron/Angle iron etc.,cut to shape, including bending and welding as necessary, etc.conforming to Fe.290.Gde-E-165, with andincluding applying two coats of synthetic enamel paint over a coat of red oxide primer complete,all as specified & directed. |
| 114 | M & L for preparation of the steel surfaces of desert cooler and applying one coat of synthetic enameled paint on all exterior surfaces and applying one coat of black bituminous paint on all interior surfaces including bottom surfaces and writing MES No of the desert cooler in the pattern as approved with different tint / colour complete all as specified and directed. |
| 115 | Supply &Fixing in replacement of unserviceablePVC distributor 3 way, suitable for 15mm dia water distribution complete all as specified and directed. |
| 116 | Supply &Fixing in replacement of unserviceable wood wool pads best quality of required size as approved (three in each on desert cooler) complete all as specified and directed. |
| 117 | Supply &Fixing in replacement of unserviceable Water circulating pump 1/ 70 H P capacity single phase 230 volts, 1340 RPM, 1.5 Mtr head suitable fot any make any capacity of Desert cooler omplete all as specified and directed.Make : AUE / CG/ Kaithan |
| 118 | Supply &Fixing in replacement of unserviceable plug top3 pin, 15/16 Amp capacity complete all as specified and directed. Make : Anchor (Penta deluxe) or other equivalent as approved by GE. |
| 119 | Supply &Fixing in replacement of unserviceableFan motor double speed 230 volts, 50 HZ 1/13HP complete suiable for any make and any capacity of Desert cooler complete all as specified and directed. Make Cool Home/AUE. |
| 120 | Supply &Fixing in replacement of unserviceable Capacitor suitable for any type any capacity of desert cooler fan motor complete all as specified and directed. |
| 121 | Supply &Fixing in replacement of unserviceable Regulator for any type any make of Desert cooler complete all as specified and directed. |
| 122 | Disconnecting and removing the water and electric connections carefully from the existing Geyser of capacity 25/50 ltrs, any makeand taking out the same in any position from the existing location.Opening the Geyser for inspection, repairs and reassembling the same as per the original assembly after repairs/ replaceing the wourn out unserviceable parts with new parts as orderedincludingre-fixing same position of the Geyser and making electric connection, water inlet and outlet connection, testing andchecking of all the functioning of water inlet outlet valves connected with geysers.complete all as specified and directed. . Note :- Spare parts if any requires replacement shall be measured and paid for separately. |
| 123 | Disconnecting and taking down the existing Geyser of any description and any capacity (25 / 50 Ltrs) and any position from the existing location and Dismantling the Geyser of any capacity and of any description material and labour for cleaning and de-scaling the inner tank and other parts / accessories including inlet, outlet , overflowGeyser element, thermostat , base assembly etc. with brush, cleaning rod, and using de-scaling solution mixed with water in suitable proportion till the complete deposits /scale is removed, brazingfor stopping leakage of copper inner tank/gas welding for inner steel tank, re- assembling the complete Geyser after cleaning,Fixing and installation of Geyser in position and testing to the entire satisfaction. Note :- Spare parts if any requires replacement shall be measured and paid for separately |
| 124 | Supply only Rubber PVC gasket to ensure water tightness for 25/50 liters capacity complete, all as specified and as directed. |
| 125 | Supply only MS base plate cup any type with screws of suitable size as per requirement complete, all as specified and as directed. |
| 126 | Supply only Heating element of the 1.5/2 KW rating as required at site including rubber washers of any make and type complete, all as specified and as directed. |
| 127 | Supply only Steelinner tank of 25 litre capacity geyser tank by made out of steel sheets appropriate thickness complete, all as specified and as directed. |
| 128 | Supply only Steelinner tank of 50 litre capacity geyser tank bymade out of steel sheets appropriate thickness complete, all as specified and as directed. |
| 129 | Supply only Insulating material (glass wool for Geyser) complete, all as specified and as directed. |
| 130 | Supply only Thermostatwith setting range 30°Cto80°Csuitable for230 volts AC, electric supply complete all as specified and directed,Make – Recold / Bajaj,/ Daspass |
| 131 | Supply only Base assay complete with inlet, out let and pipes with drain plug and screw for fixing the element inclusive of clamps for holding the element with nut, bolt and washers fsuitable for 25 Liters cap to 50 Liters cap complete, all as specified and as directed. |
| 132 | Supply only Non return valve 15 mm dia cast copper alloyISI mark complete, all as specified and as directed. |
| 133 | Supply only Safety valve/Fusible plug 15mm complete, all as specified and as directed. |
| 134 | Supply only Chromium plate copper connecting tube 450 mm long with two brass adopters suitable for 15 dia pipe and connecting up complete with washers complete, all as specified and as directed. |
| 135 | Supply onlyPVC connecting tube 450 mm long with two brass adopters suitable for 15 mm dia pipe and fixing in position ,superior quality as approved by GE. |
| 136 | M&L in replacement of unserviceable bottom plate of geysers 25/50 liters capacity, same sizes and shape complete all as specified & directed. |
| 137 | M&L in replacement of unserviceable air release valve 15 mm bore for geyser as per existing typecomplete all as specified and directed. |
| 138 | M&L in replacement of unserviceable Indicating lamp of size /shape as per existing suitable for 230 Volts AC supply. complete all as specified and directed |
| 139 | M&L for Painting of geysers size 25/50 liter any make with two coats of broken white enameled paint with spray gun of approved quality after removing all dust/rust and scrapping up old painted surface including preparation, filling of cavaties with metal putty, complete including writing MES No in 2 mm width letter on geyser body with black enameled paint complete all as specified and directed. |
| 140 | Excavation in trenches in any type of soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient forlaying cables/pipes etc. including removing cable protection covers/ bricks complete all as specified and directed. Notes : (i) Excavation shall be made carefully in order to avoid damage of existing cables and brick protection. (ii) The excavation work may be carried out in short lengths for locating fault in under ground cables at different locations |
| 141 | M&L for Returning, filling in, including spreading leveling, watering and well ramming the excavated soil in layers not exceeding 25 cm thick complete all as specified and directed. |
| 142 | M&L for Removal of surplus excavated soil to a distance not exceeding 50 Mtr distance and depositing as directedat a level not exceeding 1.5 mtr above starting point complete all as specified and directed. |
| 143 | Material & labour for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches/ducts for cable protection complete all as specified and directed.(NOTE : Thickness after punning shall be measured for payment) |
| 144 | M&L for Un-reinforced precast concrete cable cover class LV type I, flat, size 250mm x 150mm x 40mm as proteciton to under ground cable laid dry flat adjoining each other complete all as specified and directed |
| 145 | Fixing / laying only old retrieved bricks of any description as obtained from dismantling of the cable complete all as specified and directed. |
| 146 | Disconnecting and taking out old unserviceable GI pipe and Supplying, laying & jointing GI water tubing, 50 mm bore, light grade as in sleeving etc laid in trenches / pole post etc, cutting and making necessaries arangement by means of wedling and jointing suitable for post of larntent/ street light fitting including PCC work complete all as specified and directed . Make of pipe TATA / Jindal / Swastik / Prakash / BSTor any other ISI marked make approved by GE.(Note : PCC work shall be measured and paid seperatly under Sch "A" relevent item) |
| 147 | Disconnecting and taking out old existing unserviceable/ non- functional LT Cable and Supplying, laying, jointing and testing cable XLPE insulated IS 7098 (Part-I)-1988 marked, screened, PVC sheathed, armoured electric power cable (heavy duty) with aluminum conductor for working voltage upto and including 1100 Volts, cross sectional area of under mentioned size of cables laid in trenches/fixed on pole/wall / passed through pipe complete all as specified and directed. Make:Havells/GLOSTER/Polycab) (NOTE: Earth work, sand cushioning, pipe, clamps for holding cables and brick protection shall be measured and paid separately ) |
| 148 | 10 Sqmm 2 core |
| 149 | 16 Sqmm 2 core |
| 150 | 16 Sqmm4 core |
| 151 | 25 Sqmm4 core |
| 152 | Re-layingonly LT cable Obtained form Item No.141.01 to 141.04 of 10 sqmm to 25 sqmm (Any core) |
| 153 | Labour only for checking the serviceability of the different spares / components / parts of security light fittings/post top lantern light fittings (LED,HPSV, Metal Halide, flood lightfittings etc, any wattage/capacity) of any description and fixed in any position, replacement of un-serviceable/damaged/ broken part(s) either in single or in combination, re-assembling the fittings and making the light fittings serviceable, fixing the fittings in position, connecting to electric supply and its testing on installation complete all as specified and directed here in after in notes.NOTES FOR SCH `A’ ITEM NO :142:- (i) Replacement of parts i.e Drivers,SPD, LED board,lamps, choke, Igniter, Condenser, Holder, covers etc for Street/Flood light fittings any wattage & capacity, if any required at site, shall be measured and paid for separately under appropriate item of Schedule `A" as ‘supply only.(ii) Necessary T&P i.e. ladder, tools etc required for checking and making the light fittings in serviceable conditions, its fixing in position and testing shall be arranged by the contractor at his own cost for checking and fixing of street light fittings/security light fittings of any description on poles / on walls / on pillars etc i.e. in any position at site. (iii)Required screws, insulating tapes, internal wiring wire and other minor items excluding the required spares parts for repairing and making the street light fittings/security light fittings in serviceable condition, will be arranged & supplied by the contractor and cost of which is deemed to be included in the rates quoted by the contractor in above respective item.(iv)Contractor shall be paid only one time the labour charges quoted above in Schedule `A" items for a particular fitting repaired irrespective of the number of times labour and resources arranged by him to check the serviceability of the fittings and replacement of unserviceable / defective parts in order to maintain the fittings in serviceable/working condition. (v) Contractor’s quoted rates for Schedule `A" item No 9 is deemed to include for inspection/checking the serviceability of the fittings in position or by taking down as per site requirement, removing the damaged unserviceable / broken parts, fixing the new parts as required, fixing the fittings in same position or the other, connecting the fittings with electric source and testing of fittings as directed. |
| 154 | Supply onlythe following parts for LED fittings complete all as specified and directed. NOTES: (i) Fixing element of these items is deemed to be included in the rates quoted by the contractor for Sch `A" item No 142 (ii) Spare parts/items shall be of make Crompton Greaves/Philips/Bajaj/Havells & suitable for the existing fittings. (iii) The above items shall be operated with prior written approval of GE and when required spares are not available with the deptt to issue to contractor under Sch ‘B’ “Free for fixing” and Contractor shall have no claim on account of non execution of above items. |
| 155 | Driver Suitable for 45/48Watt LED fittings.Make:C&S/Havells/Bajaj/Crompton |
| 156 | Driver Suitable for 60Watt LED fittings, Make:C&S/Havells/Bajaj/Crompton |
| 157 | Driver Suitable for 90Watt LED fittings,Make:C&S/Havells/Bajaj/Crompton |
| 158 | Driver Suitable for 100/120/150Watt LED fittings. Make:C&S/Havells/Bajaj/Crompton |
| 159 | Safety Protection Device (SPD). Make:C&S/Havells/Bajaj/Crompton |
| 160 | M&L for making holes in electric/street light poles of any height or in any shape, by means of drill machine and drawing of drawing of 1.5sqmm x3 core cable through the hole from junction box to the hole on the top of pole near the street light fitting complete with all electric connections complete all as specified and directed.. (Rates of the cable deemed to be included) |
| 161 | Taking down existingunserviceablebracket complete and S&F 40 mm dia GIlightgrade pipe bracket 1.50 m long bent to shape by cutting & weldingas required & directed and fixed to pole withtwo Nos of FI clamps 40x5 mm to be tightened with bolts, nut and washers and including painted withtwo coat of aluminium paint over a coat of red oxide primer complete all as specified and directed. Make of pipe TATA / Jindal / Swastik / Prakash / BSTor any other ISI marked make approved by GE. |
| 162 | Supply and fixing in replacement of UNSV 20W LED Post top lantern complete accessories to be fixed on pole/wall includingconnecting the fitting to control switch at the bottom of the pole with using 2.5 Sqmm two single core PVC insulated and unsheathed copper conductor cable complete,all as directed and directed. Make : Cromptonof /Havells/ C&S/Bajaj/Shakti.(Note :PCC work shall be measured and paid seperatly under Sch "A" relevent item and rate of cable deemed to be included ) |
| 163 | Supply and fixing in replacement of UNSV 40W LED Post top lantern complete accessories to be fixed on pole/wall includingconnecting the fitting to control switch at the bottom of the pole with using 2.5 Sqmm two single core PVC insulated and unsheathed copper conductor cable complete,all as directed and directed.Make : Crompton/ Havells/ C&S/Bajaj/ Shakti.(Note :PCC work shall be measured and paid seperatly under Sch "A" relevent item and rate of cable deemed to be included ) |
| 164 | Taking down old unserviceable MS junction boxes from the pole with disconnectiong all connections, Supplying and fixing in position new Pole box made of thermoplastic Polycarbonate having IP65/IP66 degree of protection (shock proof, dust proof, jet water proof and acid resistive). The gasket should be internally embedded, and made of Polyeutherene. The boxes shall be tested as per IEC 60670-2/ 60670-22. The boxes shall have self threaded holes & provision for mounting din rail. The lid should be hinged type with sealing screw. The screw should be of stainless steel so that there is no corrosion. The boxes should withstand temperature of -40c to +120c. The glow wire test should be conducted at 960 c or 750 c and material should be flame retardant & self extinguishing. UL subject 94, V-0. The boxes should be free from toxic substances like hal ogen and silicon. The boxes should have suitable pre-moulded knock out /or plan wall depending on requirement. Box dimension shall not be less than 200 X 160 X98 MM (LXBXH). Box shall be suitable for 16/25Sqmm cables including one no. MCB SP 230 volts 6 amps of make Havells/Legrand/ABBand connecting the bus bars to cables withusing suitable GI nut, bolts and washers and aluminum lugs etc fixed on pole using 30x5mm FI clamps,nuts,bolts & washers complete all as specified and directed. Make: Hensel/GE/Legrand. |
| 165 | Material & labourof PCC 1:3:6 type C-2 using 20 mm graded stone aggregate (4 stay). in mass concrete and filling completefor foundation/hard standing coping ,complete all as specified and directed. |
| 166 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling of poles and mass concrete etc complete all as specified and directed. |
| 167 | M & L for cutting chases in hard standing road/path/drain etc for passing cables/pipes etc. size of and removing the excavated materials and disposal at 50 metre distance and making good the cutting after the pipe and cables are laid with PCC 1:3:6 type C-1 using 20mm graded stone aggregates complete all as specified and directed. |
| 168 | Supplying,erecting and fixing in replacement of UNSV steel tubular swaged pole (410 SP – 31), 9 mtr long,in true vertical position complete conforming to IS : 2713 (Part-I & III) 1980 with cast iron base plate, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole with and including 2 coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole finished with one coat of red oxide primer complete, all as specified and directed. (Note : Excavation and PCC work shall be measured and paid seperatly under Sch "A" relevent item) |
| 169 | Supply, fixing & testing in replacement of UNSV15W LED street light with corbonate cover with high inpact resistance, 15 W-1500 lumens with efficacy of 100 lumans /wall at system level, ingress protection of IP65 PF-0.9 & with input resistanct i.e.IK 09 surge protectin upto 4KV,compiled withIS 10322 CCT is greater than 5000K,complete with all accessories duly prewired, supply and fixing the bracket of 40 mm dia 60 cm long GI pipe light grade bent to shap and including MS FI clamp of 20X3 mm nut and bolts and connected with flexible cable 3 core copper conductor 0.5 Sqmm upto ceiling rose complete mounting on existing MS frame bracket including connecting the fitting complete, all as specified and directed. Make-Crompton / Havells/C& S/Bajaj/ Shakti. (Note :- GI pipe bracket and clamp shall be measured and paid seperatly under Sch "A" relevent item) |
| 170 | Supply, fixing & testing in replacement of UNSV45W LED street light IP66 Powder coated pressure die cast aluminium High power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewiredand suitable fixing arragement for mounting on existing MS framebracketincluding connecting the fittingcomplete all as specified and directed. Make-Crompton / Havells/C& S/Bajaj / Shakti. (Note :- GI pipe bracket and clamp shall be measured and paid seperatly under Sch "A" relevent item) |
| 171 | Supply, fixing & testing in replacement of UNSV60W LED street light IP66 Powder coated pressure die cast aluminium High power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewiredand suitable fixing arragement for mounting on existing MS framebracketincluding connecting the fittingcomplete all as specified and directed. Make- Crompton / Havells/C& S/Bajaj). (Note :- GI pipe bracket and clamp shall be measured and paid seperatly under Sch "A" relevent item) |
| 172 | Supply, fixing & testing in replacement of UNSV90W LED street light IP66 Powder coated pressure die cast aluminium High power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewiredand suitable fixing arragement for mounting on existing MS framebracketincluding connecting the fittingcomplete all as specified and directed. Make- Crompton/Havells/C& S/Bajaj/ Shakti. (Note :- GI pipe bracket and clamp shall be measured and paid seperatly under Sch "A" relevent item) |
| 173 | Supply, fixing & testing in replacement of UNSV120W LED street light IP66 Powder coated pressure die cast aluminium High power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewiredand suitable fixing arragement for mounting on existing MS framebracketincluding flexible cable 3 core copper conductor 0.5 Sqmm upto ceiling rose complete mounting on existing MS frame bracket including connecting the fitting complete all as specified and directed. Make- Crompton /Havells /C& S/Bajaj/ Shakti. (Note :- GI pipe bracket and clamp shall be measured and paid seperatly under Sch "A" relevent item) |
| 174 | Supply, fixing & testing in replacement of UNSV 120W LED Flood light IP66 Powder coated pressure die cast aluminium High power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewiredand suitable fixing arragement for mounting on existing 16 mtrs High Mast/11 mtrs pole /9 mtrs poleor Bldg MS frame/bracketincluding connecting the fittingcomplete all as specified and directed. Make- Crompton/Havells/C& S/Bajaj/Shakti (Note : GI pipe bracket shall be measured and paid seperatly under Sch "A" relevent item) |
| 175 | Supply, fixing & testing in replacement of UNSV LED highbay/mediumbay LED IP 65 luminaire with high efficiacy light fittings 150 watts with all aecessaries complete on Pole and building wall/ ceiling comple (Make- Crompton /Havells /C& S/Bajaj). |
| 176 | Material and labour for cleaning and preparation of all existing steel surfaces of straight Electric/ steel tubular poles 9 mtrs long for painting including mild steel cross arms, clamps and street light brackets,protection pipe, MS boxes etc and applying Two coat of aluminium paint all round the exposed steel surfaces of existing steel tubular poles of any description and in any position above the height of 1.50 mtr from the plinth of the pole and applying one coat of synthetic enameled paint of different colours in strips of 150mm width upto the height 1.5 mtr from the plinth of polecomplete all as specified and directed. |
| 177 | Material and labour for cleaning and preparation of all existing steel surfaces of straight Electric/ steel tubular poles 11 mtrs long for painting including mild steel cross arms, clamps and street light brackets,protection pipe, MS boxes etc and applying Two coat of aluminium paint all round the exposed steel surfaces of existing steel tubular poles of any description and in any position above the height of 1.50 mtr from the plinth of the pole and applying one coat of synthetic enameled paint of different colours in strips of 150mm width upto the height 1.5 mtr from the plinth of polecomplete all as specified and directed. |
| 178 | M & L for re-writing letters or figures (Black, roman, Indian)for electric/ street light pole Nos on existing poles with stencilout with black colour including fixing red colour radium of 80 mm hight arround the radius of pole complete all as specified and directed. |
| 179 | M&L in replacement of UNSV cross arms, bracing, supports, clamps and black plates fabricated from structural steel sections including nut,bolts and washer welding, bending cold or hot ,drilling holls for bolts in any shape or size as indicated or directed and inclisive one primer coat one under coat and one finishing coat of paintscomplete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
