Mfhm Society Urgent Renovation And Repair Works Of Buildings During Trawl Ban Period The Scope Of The Proposed Work Includes Dismantling Of Damaged Floor Tile , Wall Tile , Granite Slab And Laying Of New Tiles, Aluminum Work For Grill, Plastering An
Tender Value
19 Lakhs
Estimated cost
Bid Submission
08 Jul 2022
0 days left
EMD
47500
Bank guarantee accepted
Document Fee
2800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Mfhm Society Urgent Renovation And Repair Works Of Buildings During Trawl Ban Period The Scope Of The Proposed Work Includes Dismantling Of Damaged Floor Tile , Wall Tile , Granite Slab And Laying Of New Tiles, Aluminum Work For Grill, Plastering And Painting Works Etc At Auction Hall 1, 2, 3 And Commercial Building
BOQ
| Sl. No. | Item Description |
| 1 | APPENDIX A- Auction hall -1 |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 3 | Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually /by mechanical means including stacking of serviceable and disposal of unserviceable material within 50metres lead as per direction of Engineer-in-Charge:In cement mortar |
| 4 | Engaging labour: Coolie |
| 5 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 6 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 300x300 mm |
| 7 | Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab upto 0.50 sqm |
| 8 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 9 | Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ) |
| 10 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an even shade :One or more coats on old work |
| 12 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of Applyingpriming coat With ready mixed red oxide zinc chromate primer of approved brand and manufactureon steel galvanised iron or steel (1 cement : 4 fine sand) |
| 13 | Wall painting with plastic emulsion paint of approved brand and manufactureto give an even shade:One or more coats on old work |
| 14 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & locksystem with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially,necessary deduction for scaffolding in the existing item to be done . |
| 15 | APPENDIX B-AUCTION HALL 2 |
| 16 | Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually / by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge:In cement mortar |
| 17 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 18 | Crazy marble stone flooring, including filling the gaps with light shade pigment with white cement marblepowder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1 mm to 4 mm nominal size by volume), with under layer 25 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc.complete:18 mm thick crazy marble stone white, black or as specified |
| 19 | Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machinecut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarsesand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, includingrubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at alllevels.Granite of any colour and shadeArea of slab upto 0.50 sqm |
| 20 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to bespecified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mmthick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm, including pointing in white cement mixed with pigment of matching shadecomplete. |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give aneven shade :One or more coats on old work |
| 22 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & locksystem with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding forworking platform etc. and maintaining it in a serviceable condition for the required duration as approvedand removing it there after. The scaffolding system shall be stiffened with bracings, runners, connectionwith the building etc wherever required for inspection of work at required location with essential safetyfeatures for the workmen etc. complete as per directions and approval of Engineer- in Charge. Theelevational area of the scaffolding shall be measured for payment purpose. The payment will be madeonce irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially,necessary deduction for scaffolding in the existing item to be done . |
| 23 | Wall painting with plastic emulsion paint of approved brand and manufactureto give an even shade:Oneor more coats on old work |
| 24 | APPENDIX C - AUCTION HALL-3 |
| 25 | Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually /by mechanical means including stacking of serviceable and disposal of unserviceable material within 50metres lead as per direction of Engineer-in-Charge:In cement mortar |
| 26 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metreslead.For thickness of tiles 10 mm to 25 mm |
| 27 | Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab upto 0.50 sqm |
| 28 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 29 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1: 4 ( 1 cement : 4 fine sand) |
| 30 | Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approvedstandard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mmcentre to centre, including cutting the grill to proper opening size for fixing and operation of handles andfixing approved anodised aluminium standard section around the opening, all complete as perrequirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ). |
| 31 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 32 | Urgent Renovation and Repair Works to Commercial BuildingCIVIL WORK(Commercial building) |
| 33 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 34 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1: 4 ( 1 cement : 4 fine sand) |
| 35 | Wall painting with plastic emulsion paint of approved brand and manufactureto give an even shade:One or more coats on old work |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an evenshade :One or more coats on old work |
| 37 | Finishing walls with textured exterior paint of required shade :Old work (One or more coats) applied @ 1.82 ltr /10 sqm. |
| 38 | Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square orround bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ woodenframes with rawl plugs screws etc |
| 39 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 40 | Providing and fixing stainless steel butt hinges with necessary screws etc, complete: 100x58x1.9 mm |
| 41 | Supplying and fixing 250 mm MS altrop |
| 42 | WATER TANK |
| 43 | Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., includingcutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete |
| 44 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 45 | Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mmnominal size) |
| 46 | Electrical work |
| 47 | Above 11.00 metre and upto 13.00 metre |
| 48 | Laying of one number PVC insulated and PVCsheathed / XLPE power cable of 1.1 KV grade offollowing size direct in ground including excavation, sand cushioning, protective covering andrefilling the trench etc as required.Above 35 sq. mm and upto 95 sq. mm |
| 49 | Supply, conveyance,installation ,testing and commissioning of 250W LED street light |
| 50 | Site clearing,Canal cleaning ,Cutting branches of trees |
| 51 | Cutting branches of trees overhanging above any structures of girth beyond 120cm including stacking ofserviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope andpully etc without making any damages to nearby structures etc complete. |
| 52 | Engaging labour: Coolie |
| 53 | Engaging machinery for removal of vegetation filled soil for embankment foundation: Front end loader capacity 1 m3 |
| 54 | Hire and running charges for tipper |
AI Tender Summary
Tender Timeline
Jul 01, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender