Construction Of Knowledge Centre At Anandhagiri 7Th Street, Ward No.18, ( Ts.No.55, Block-18, Ward -D ) In Kodaikanal Municipality
Tender Value
2.19 Crore
Estimated cost
Bid Submission
15 Jul 2022
0 days left
EMD
2.19 Lakhs
Bank guarantee accepted
Document Fee
16800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kodaikanal → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Knowledge Centre At Anandhagiri 7Th Street, Ward No.18, ( Ts.No.55, Block-18, Ward -D ) In Kodaikanal Municipality
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Jun-2022 | change date | Date | 15-Jul-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS 20B and Sand, silt or other loose soil, wet sand, silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed, cleaning and levelling the site etc., complete - Footings- First Depth Upto 2.00M |
| 2 | For Foundation first depth |
| 3 | Plinth Beam |
| 4 | Supplying and filling in foundation andbasement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted - etc., complete complying with standard specification. |
| 5 | Plain Cement concrete 1:4:8 (one cement, four sand, eight aggregate) using 40mm gauge handbroken granitestone jelly for foundation including dewatering if foundnecessary and laid in layers of not more than 15cmthick and compacted,etc., complete complying withstandard specfication. |
| 6 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam |
| 7 | Plinth Beam |
| 8 | Column |
| 9 | Slab |
| 10 | Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) |
| 11 | Upto basement |
| 12 | Above basement |
| 13 | For first floor |
| 14 | Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors as per standard specification. |
| 15 | Supplying and filling the basement with Goodwell gravel filling in layers of not more than 15cmthick well rammed watered and compacted - etc., complete complying with standard specification. |
| 16 | Brick work in CM 1:5 (one cement & Five sand) using II class ground moulded bricks of size 9\"X43/8\"X 23/4\" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost). |
| 17 | Upto Basement |
| 18 | Brick work in CM 1:5 (one cement & Five sand) using II class ground moulded bricks of size 9\"X43/8\"X 23/4\" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost)- Ground Floor |
| 19 | Brick work in CM 1:5 (one cement & Five sand) using II class ground moulded bricks of size 9\"X43/8\"X 23/4\" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost)-FirstFloor |
| 20 | Brick Partition Walls using III class ground moulded country bricks of size 8.75\"X4.25 \" X 2 3/4\" in C.M 1:3using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification - 10 sqm |
| 21 | Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications |
| 22 | Special ceiling plastering in all floors and finishing the exposed surface of RCC items of work such as slab, beam, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with cement mortar 1:3 (One cement and three sand) 10mm thick including hacking the surfaces and providing cement mortar nosing, beading for sunshade, staircase, step, landing slab etc., including neat finishing and curing etc., complete complying with standard specification and as directed by the departmental officers |
| 23 | Joinery(SH: - 5.0 - JOINERY & PARTITION WORKS ) Providing and fixingI Class Teak Wooden Frame & Shutter (Pannels) as per the drawing for Door, windows & ventilators with necessary fixtures and accessories approved by the Architect and client & other sections of approved make confirming to IS fixed with rawl plugs & screws or with fixing clips including necessary filling up of gaps at junctions, at top, bottom & sides, with 4mm glass, all complete as per architectural drawings & directions of Engineer- in-Charge at all levels.(glazing & panelling to be added in the rate). Cost Including spray painting,etc. |
| 24 | Supply and fixing ofmetalfalse ceiling(SOR 2021-2022 P.67 , slno.274) |
| 25 | Dadooing walls withGlazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (one cement, two sand) over 10mm base layer plastering and pointing with white cement neatly as directed etc., complete as per standard specification |
| 26 | Paving the floor with design Antiskid ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement etc, complete as per standard specification. |
| 27 | Paving the floor with Vitrified Marbonite tiles of stain free nano polish approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer.The colour & quality of tiles should be got approved by Municipal Engineer before use on workion. |
| 28 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m |
| 29 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 30 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete |
| 31 | Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being \"32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers.etc., complete as per standard specification. |
| 32 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete as per standard specification. |
| 33 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
| 34 | Supply and fixing of Stainless steel (Salem stainless steel) Door frame ( Box section using stainless steel plate of 1.6mm thick) of size 100mm X 60mm with a rebate of 30 / 35mm X 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel holdfast etc. |
| 35 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the executive Engineer before use on work(PWD SOR Sl.No 65, P.265) |
| 36 | Supplying and fixing UPVC (Un-Plasticized PolyvinylChloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work (PWD SOR Sl.No 65, P.266) |
| 37 | Providing and laying, spreading and compacting graded stone aggregate to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. |
| 38 | Supplying and laying Rubberised interlocking Paver blockM40 grade Providing and laying of83mmthick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, Stone Dust cushion 150mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. |
| 39 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 40 | Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 41 | Internal Wall Painting : Providing and applying 3 coats of Asia Paint Royal Premium Emulsion Paint to internal walls over primer and 2 coat putty at all levels and heights to give an even shade including scaffolding, curing, etc. all materials and labour complete in all respects and as directed by the Engineer |
| 42 | Provision for Elevation work |
| 43 | Supplying and fixing of ball valvewith, bolted bonnet, inside screw, non rising spindle, conforming to IS : 14846 (Sluice valve)/ASTM A105 (Ball valve) -(PN – 10.0) etc. including necessary fittings & testing of valve joints complete as per direction of Engineer in Charge |
| 44 | 25 mm nominal bore |
| 45 | PVC Pipe (Un-Plasticized Polyvinyl Chloride)UPVC used for residential and homeapplications, water pressure in residentialareas do not normally exceed the maximumtolerance. (Schedule-40) |
| 46 | 20mm dia |
| 47 | 25mm dia |
| 48 | Supplying and fixing in European Water Closet (white ) with \"P\" or \"S\" Trap with Double Flapped seat and seat cover with Brass Highes and 10 litre capacity PVC low level flusing tank with all internal fittings & accessories etc.. |
| 49 | Supplying and fixing of position of Indian make whiteglazed earth were wash basin 550mm x 400mm with all accessories such as cost Iron brackets, 32mm dia C.P. Waste coupling, Rubber plug and chain, 32mm dia \"B\" class, G.I. Waste pipe, 15mm dia, G.M.Wheel valve, 15mm dia Nylon connection, 15mm dia Brass Nipples, 15mm C.P. pillar tap etc., |
| 50 | Supply and fixing in position ofbrass chromium plated screw down Tap 15 / 12mm Dia (Heavy Type) with necessary accessories, , etc.complete complying with standard specifications and as directed by the departmental officers. |
| 51 | Supply and fixing in position ofchromium plated stop cock 15mm Diawith necessary accessories, , etc.complete complying with standard specifications and as directed by the departmental officers. |
| 52 | Supply and fixing in position of Porcelin soap dish of size 150mm x 150mm x 50mmwith necessary TW plugs, clamps, screws, etc.complete complying with standard specifications and as directed by the departmental officers. |
| 53 | Supply and fixing in position of brass chromium plated towel rail 60cm long and 20mm dia with Brackets with necessary TW plugs, clamps, screws, etc.complete complying with standard specifications and as directed by the departmental officers. |
| 54 | Supply and fixing in position ofPVC / Fibre Glass framed 5.5mm thick mirror, shelf type with Hard Board Backing with necessary TW plugs, clamps, screws, etc.complete complying with standard specifications and as directed by the departmental officers. |
| 55 | Supply and fixing in position of Stone ware gully trap of size 150mm x 100mm withcast Iron Double Gratings with necessary accessories, , etc.complete complying with standard specifications and as directed by the departmental officers. |
| 56 | Supply and fixing in position of Cast Iron Nahini / Floor Trap with stainlessSteel Gratingwith necessary accessories, , etc.complete complying with standard specifications and as directed by the departmental officers. |
| 57 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2 |
| 58 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2 |
| 59 | Supplying and laying the following dia un plasticized PVC pipes 6KSC & 10 KSCconfirming to IS 4985/2000 and relevant specials including packing the joints with rubber /lubricant fixing ,holding wherever necessary and making good of the dismantled portion with necessary connectionsetc., complete as directed by engineer in charge. |
| 60 | 75 mm dia |
| 61 | 110 mm dia |
| 62 | Pipe Excavation |
| 63 | Excavating trenches of required width for pipes including excavation for sockets, refilling.and dressing of sides, ramming of bottoms, depth up to 1.1m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 64 | Earth work (other than loose soil) for HDPE / PVC / GRP pipe |
| 65 | 40 mm diato 160 mm dia - (0.60 m width, 1.05 m depth) |
| 66 | Supply and fixing under ground sump and over head tank Coverwith necessary accessories, , etc.complete complying with standard specifications and as directed by the departmental officers. |
| 67 | Manhole Cover Size 900x900 mm double seal, air tight, non-slip SFRC cover & frame for manhole |
| 68 | Manhole Cover Size 60 cm x 60 cm(heavy duty) with frame - SFRC |
| 69 | Manhole Cover Size 1000 mm circle type double seal, air tight, non-slipFRP manhole cover with frame |
| 70 | Supply and fixing of Precast RCC(M30) Bio septic tank of 2.25KLD consists of three chambers - sedimentation chamber,Bioprocessing chambe with PP flower media(virgin plastics bio balls) & settling chamber which shall be coated inside and outside of tank with PU paint for extended life of tank up to 25 years. 2nos of manholes of 500mm shall be provided for easy and safety service. Bio-enzyme shall be used which consists of 20 different types of enzymes and bacteria which can develop in both aerobic and anaerobic conditions and this will start to reduce the BOD and COD of the sewagewater and the water will loses its hardness during this process and neutralizes the PH between 6.6 to 7.5. The settled sludge shall be self-digestive. Treated water is orderless and colorless and shall be discharged to Garden/Choke pit/connected to existing sewer line. (Q) |
| 71 | Borewell - According to the site condition |
| 72 | Providing Geophysical survey incuding all and conveyance,etc., complete |
| 73 | Drilling ofBorewell 150 mm diainSedimentary formationand hard rock area including labour charges for inserting of casing pipesand supplying and packing of pebbles etc., complete |
| 74 | Supply and delivery of 150 mm dia PVC Plain casing pipe etc., complete.as per standard specification |
| 75 | Supply and fixing of 2000 lit HDPE Tank ISI make with all accessories such as Tank Nipple, Washer etc,including cost and conveyance of all materials to site etc, complete as per standard specifications. |
| 76 | Supplying and erecting in position of following liters capacityIndustrial Model Reverse Osmosis Water-cum-Purifier todeliver Potable Water with World Health Organisation (WHO)Standards with following accessories.(a) MS Skid - 1 No.(b) Media 11054 No. Vessel with 20 nb Multiport Valve (withMedia Pubble and Fine Sand and Activated Carbon Filling) set(c) Feed Pump 0.50 HP – 1 No.(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.(e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic(USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No.& Pressure Gauge - 2 Nos.(f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., LowPressure Switch - 1 No., Level Switch - 1 No. & NecessaryCPVC Pipes and Fittings.The system shall be provide with Two Panel Control Systemwith necessary Stainless Valves and Fittings and Float Controletc. The rate should be inclusive of all civil works, wherevernecessary to install the System in position and intact.Data For PWD Rate - 2021-2022 S. No:295 250 Litter |
| 77 | Supply of following GI pipes and PVC Special etc.,complete |
| 78 | 125LpmX25m head submercible pump set of ISI make |
| 79 | 1.5HP pannel board |
| 80 | MS Koosk box |
| 81 | 4 sqm 3 core copper cable |
| 82 | 40 mm dia HDPEHose pipe(4Kg/sqm) |
| 83 | 32 mmdia GI hex nipple |
| 84 | 32 mm GI pipe |
| 85 | 32 mmdia GM NRV |
| 86 | 32 mmdia GI union |
| 87 | 12 mmdia nylon rope |
| 88 | Bore cover |
| 89 | 32 mm diakitty set |
| 90 | Bore stand |
| 91 | 32 mm x 20 mm diaGI reducer |
| 92 | 20 mm diax 0.20 m G I pipe nipple |
| 93 | 20 mmdia GI coupling |
| 94 | 32mm dia GI Coupling |
| 95 | 1000 litre HDPE tank |
| 96 | 32 mm dia PVC pipe(10Kg/sqm) |
| 97 | 32 mm dia PVC tee |
| 98 | 32 mm fuse carrier |
| 99 | 32 A mainSwitch |
| 100 | 32mm diax 0.20 mG I pipe nipple |
| 101 | 40mm dia PVC pipe |
| 102 | 40mm dia PVC Coupler |
| 103 | 40mm dia PVC Elbow |
| 104 | 40mm dia PVC Tee |
| 105 | Supply, installation testing and commissioning of 3Ph EB Service panel & all necessary protection as per TNEB standard, including all fuse unit, EB meter shall be suitable for utilizing excess power from Solar panel, 40A DP MCB - 1 No, 32A DP MCB-2 Nos |
| 106 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). SD 23 |
| 107 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. SD 38 |
| 108 | Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. SD 54 |
| 109 | Earthing as per P.W.D. standard with an earth electrode of 2Mtr. Class \"B\" GI pipe of dia not less than 32mm complete with necessary masonry work.SD 234 |
| 110 | Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 A per way with 100 A TPN MC switch with suitable trunking box Ms cable entry boxes and internal connection on suitable angle iron frame work with earth connection(SD. 175) |
| 111 | Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40 A 4 pole MCB isolater as incoming and 12 Nos. 6A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB\"s should be with the ISI mark (lik standard make) (SD. 179) |
| 112 | Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8 SWG GI wire at the equal interval of 1.5m (SD.75) |
| 113 | Supply and run of 4 X 6 sq.mm (84/0.3) 7/20sqmm PVC unshealed copper cable in suitable PVC rigid pipe concealed on wall and ceiling withcontinuos earth wire connection of 14 SWG TCwire with painting of suitable colour SD 68 |
| 114 | Supply and fixing of 300mm (12\") sweep AC exhaust fan complete with necessary wall opening and making good of the wall. SD115 |
| 115 | Wiring with 2 x 4sqmm (56 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC power plug point.SD 40 |
| 116 | Supplying and laying of PVC insulated, PVC sheathed, armoured, LTUG cable of size 2 core 10 sqmm Al.cable clamped on walls(SD 210) |
| 117 | Supplying and fixng of cable gland and termination with earth connection of size 2 core 10 sqmm etc, complete as per standard specification. (SD 182) |
| 118 | Supply and fixing of TNEB Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2\" x 1 1/2\" x 1/4\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 63A fuse units(500V) 1 No. Neutral link, copper earth flat of size 1\" x 1/4\" with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete.SD 129 |
| 119 | Supply and fixing of 32 A TPN MC switch on incoming and 3 Nos 32 A DPMC Switch (Front Handle) as outgoing with suitable adoptor box with suitable MS cable entry box trunking boxes and internal connections on internal connections on suitable AI frame work with earth connection etc,complete.SD 172 |
| 120 | Supply and fixing of 3 phase 4 wire 4 way ICDB of 16 A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work with PWD earthing etc,complete.SD 173 |
| 121 | Earthing as per the ISI specification with an earth electrode of 2.1mt class \"B\" GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry . SD 233 |
| 122 | Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG Cuwireand making good of the concealed portion with suitable colour (SD57) |
| 123 | Supplying and Laying of 3½ x 50 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 M putting 0.15 M layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. [ SD 200] |
| 124 | Supplying of 4 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 M putting 0.15 M layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. [SD 196 ] |
| 125 | Conveyance, installation, testing and commissioning of pre-wired 6 W LED Down light fitting suitable forSurface complete with all accessories etc. |
| 126 | Conveyance, installation, testing and commissioning of decorative type, 4mtr length, pre-wiredhanging type 60 watts LED Tube Light complete with all accessories etc. directly on ceiling using 2 nos hanging rope of length 60 cm properly hooked to steel hooks anchored to the ceiling and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required. |
| 127 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2Nos x 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 128 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 1Nos x 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 129 | Supply and fixingTon AC. Ton Capacity |
| 130 | Supply and fixing of 1200mm sweep Ac ceiling fan with stepped electronic300W regulator with the existing down rod on the existing clamp(SD -112) |
| 131 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 1 Nos x 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 132 | Wiring with 2x1.5sqmm(22/0.3) PVC insulated unsheathed SC. Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall, covered with hylum sheet of 3mm thick with |
| 133 | Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x 113 mm TW switch box for 5 A 3 pin non inter locking Wall socket with 5A Flush typ |
| 134 | Supply and fixing of AC Ceiling fan complete 1200mm (48”) sweep with 300mm Down rod.with regulator including cost fixing etc complete. PWD 2021-22 Pgno - 117 |
| 135 | Supply and fixing of 18W LED 3000K Square Type Recessed Fitting (indoor fittings) including cost fixing etc complete. PWD 2021-22 Pgno - 115 |
| 136 | R.C.C.Jolly by a new of followingsize in R.C.C. 1:1.5:3 using 20mm gauge hard broken granite stone jelly and river sand excluding cost of reinforcement but includingcharges,fabrication chargescuring neat finishing and labour charges for fixing the jolly in position with standard spefication |
| 137 | Brick work for seating - Construct 115mm thick brick wall of with standard wire cut bricks and use CM 1:3 (one cement & Six sand), size of 9\"x 4 3/8 \" 2 3/4\" including finishing, curing, etc., complete and fill with approved coarse rubbles for filling. |
| 138 | Brick work for seating - Construct 230mm thick circular brick wall of with standard wire cut bricks and use CM 1:5 (one cement & Six sand), size of 9\"x 4 3/8 \" 2 3/4\" including finishing, curing, etc., complete and fill with approved coarse rubbles for filling. |
| 139 | Counter top - Providing and fixing of 2 inch thick natural stone Kadappa equivalent to the prescribed size and shape with cement Grout 1:6 as instrcuted by site engineer |
| 140 | Seating area - Providing and fixing of 1 inch thick natural stone Kadappa equivalent to the prescribed size and shape with cement Grout 1:6 as instrcuted by site engineer |
| 141 | Procuring and supply of chairs as indicated in the drawings |
| 142 | High back chairs |
| 143 | Office chairs |
| 144 | Reading chairs |
| 145 | Computer zone chairs |
| 146 | Dining chairs |
| 147 | Class room chairs |
| 148 | Dining tables - Wooden tables made out of true wooden / seasoned wooden planks cut and crafted to size with necesssary MS structural framework and necessary welding joints |
| 149 | Reading tables - Wooden tables made out of true wooden / seasoned wooden planks cut and crafted to size with necesssary MS structural framework and necessary welding joints |
| 150 | Teaching table - Marine playwood with Laminate finish supported by MS structural frame and joints welded. Accommodate with necessary steel drawers for storage below the table. |
| 151 | Computer table - Marine plywood with Laminate finish supported by MS structural frame and joints welded. Accommodate with necessary steel supports to hold the CPU units with the trolley wheels for the mobility |
| 152 | Book shelves - Providing and supply of book shelves as per the design approved by the engineering division made out of MS steel with powder coating finish with storage capacity upto 6 book racks and upto an height of 2.1mtrs clear |
| 153 | Double sided racks |
| 154 | Racks along the wall |
| 155 | Magazines rack - 18mm thk Marine plywood with laminate finish with various compartments to accommodate the magazines as instructed and approved by engineering division upto height of 2.1m clear |
| 156 | Supply, Delivery & Installation of Desktop (with display) with the following specification including cost of materials and labour charges for installing etc., Technical Specification : Processor - Intel Core i3 Processor (10th Generation Processor & Board)Ram & Storage - 4GB RAM/1TB SATA HDD with DVD Writer, Key Board & Mouse OS – Windows 10 SL |
| 157 | Supply errection and commisioning of 40KV Genset of diesel capacity 50liter and automatic type of ISI Make including cost of concrete bed , errection and all other cost and conveyance etc complete |
| 158 | Providing rain water harvesting using 3 nos.of RCC well rings of 90cm inner dia (clear) with 5cm wall thickness made out of cement concrete 1:2:4 using 20mm hard broken jelly to a height of 30cm each supplying and fabricating 16 nos. of 6mm dia MS rod vertically and 3 nos. of 6mm dia MS rod circumferentially tied together with 18 guage binding wire for well rings including necessary earth work excavation 1m dia toa depth of 1m, supplying and filling 40mm HBG inside the erected well ring to a depth of 90cm, and top covered with RCC circular perforated cover slab of 1m dia and 5cm thick which inclusive of cost and fabrication of 6mm M.S reinforcement at 15 cm spacings on both directions and one 6mm M.S rod ties at the edge of the slab circumferentially including cost of moulding, curing, finishing and well placing in position and disposing off excavated earth with all initial leads and lifts in places as shown by the Departmneal officers etc., complete in all respects. |
| 159 | Supply anrrection of Fire Shield brand\" Stored Pressure Fire Extinguisher ISI Marked, Powder type Fire 6 Kg. Capacity |
AI Tender Summary
Tender Timeline
Jul 01, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 15, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender