1. Installation Of High Mast Tower Light At Bhutni Police Station At Uttar Chandipur Gp Under Manikchak Block 2. Installation Of High Mast Tower Light Near Bhutni Police Station At Uttar Chandipur Gp Under Manikchak Block
Tender Value
4.80 Lakhs
Estimated cost
Bid Submission
15 Jul 2022
0 days left
EMD
9600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chandipur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
1. Installation Of High Mast Tower Light At Bhutni Police Station At Uttar Chandipur Gp Under Manikchak Block 2. Installation Of High Mast Tower Light Near Bhutni Police Station At Uttar Chandipur Gp Under Manikchak Block
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches etc. in all sorts of soil (including mixed soil but excluding Laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom properly including bailing /pumping out water from the bed, as required & directed by the Engineer-in-charge, complete. With depth of excavation not exceeding 1.50 m. 1.50mx1.50x1.70=3.82 |
| 2 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powered earth or local sand, as per direction of Engineer-in-Charge.1.50mx1.50 = 2.25 m2 |
| 3 | Ordinary Cement concrete (mix 6:3:1) with graded stone chips (40 mm nominal size) excluding shuttering andreinforcement if any, in ground floor as per relevant IS codes. / RajMahal, 1.5x1.5x.125=0.28 m3 |
| 4 | Ordinary Cement concrete (mix 1:1 1/2 :3) with gradedtone chips (82 mm nominal size) excluding shuttering andreinforcement if any, in ground floor as per relevant IS codes. / RajMahal,1.20x1.20x0.20+0.75x0.75x1.70=1.25 |
| 5 | Reinforcement for reinforced concretework in all sorts of structures including distribution bars, stirrups, binders tc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. Tor / Mild Steel.Engieer-in-Charge.Other than SAIL/TATA/RINL.1.25x1.1x78.50/100=1.08 |
| 6 | Hire and Labour Charges for shuttering with centering and necessary staging up to 4 m using approved stout props and thick hard wood planks of approved thickness with required bracings for concrete slabs, beams, columns, lintels, curved or straight including fitting, fixing and striking out after completion of works. Using 25 mm to 30 mm thick wooden shuttering as per direction of EIC, complete.4x1.20x0.80=3.84m2, 4x0.75x1.70=5.10,[3.84+5.10]=8.94m2 |
| 7 | Supply & Fixing G1. Water proof type looping cable box size 200x150x100mm deep having 4mm thick comprising of one 250V 15A Kitkat fuse unit one NL on porcelain insulator, one compression type brass cable gland for upto 2 core to 16.0 sqmm. PVC/ A cable and having lined with rubber gasketed G1. top cover, MS clamps with bolts nuts etc. incl. painting. (page H5 item No. -05) |
| 8 | Lying of one no cable upto 35.00 sqmm. In underground trench 460mm. Wide 760mm av depth with brick protection on the top of the cable (8nos bricks per mtr.) and also filling the trench with shifted soil, leveling up and restoring surface duly rammed .(Page F2 item No.1a) |
| 9 | Supply of Al. Armoured cable of 4 core 6.0 sqmm. Of app. Make & brand.(Page K10 item no.K14) |
| 10 | Supply & Fixing sheet steel main switch on flat iron frame on wall. 30/32 A230V DP Havells make (page D1 item no.-01) |
| 11 | Earthing with 50mm dia GI pipe 3.64 mm. Thick x 3.04 mtr. Long and 1x 4 SWG G1. wire (4.0mtr. Long)13mm. Dia x80mm long G1. Bolts, doubles nuts doubles washers incl. S & F 15 mm . Dia G1. pipe protection (1.0mtr. Long) to be filled with bitumen partly under the G.L. and partly above the G1. Driven to an av depth of 3.65 mtr. Below the G1. ( page G1 item No. 02a) (TATA MQ) |
| 12 | S/F MCB D.B.2+2 way double door with 40A D.P. Isolator 24 nos. S.P. MC as outgoing Havells make. (page D6, D7, D10) |
| 13 | S/F medium gauge GI pipe (ISI medium) protection with necessary fitting and ........... Materials as required 40mm dia.(page F6item no.11) |
| 14 | Supply and delivery (with carrying) of 10.0 mtr. Galvanized polygonal high mast in two sections suitable for 180 KM./ hour wind pressure. It shall also include accessories for Octagonal poleincluding head framedoor arrangement will be provided for which mounting, Galvanised lantern carriage arrangement suitable for fixing of 5 nos luminaries symmetrically & its control gear boxes and lighting panel. The must shall have an integral power tool installed inside the base compartment for its operation . Sheet thickness 3mm bottom dia-210mm, Top dia-90mm, Base plate 300x300x16mm with suitable size & suitable number foundation board (Luminarie wiring materials not included in the mast supply price.) Bajaj or app.Make |
| 15 | Supply of LED FLOOD LIGHT LUMINAIRE With high pressure dia cast housing and IP -66 protection, 200 wattMESCAB make |
AI Tender Summary
Tender Timeline
Jun 30, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 18, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender