}
  • Home   ›
  •   Indian Tenders   › Tender Notice : 32877827

    • Consolidated Procurement Of Tools For Rtps , Hacksaw Blade 12, 30 X 3.5 Pitch Hss Tap Sets, Hss Tool Bit3x3x75mm, Hss Tool Bit 4X4x75mm Made Out, Hss Tool Bit 5X5x75mm Made Out, Hss Tool Bit 8X8x75mm Made Out, Hss Tool Bit 10X10x75mm, Hss Tool Bit 10X10-Karnataka

    Karnataka Power Corporation Limited has published Consolidated Procurement Of Tools For Rtps , Hacksaw Blade 12, 30 X 3.5 Pitch Hss Tap Sets, Hss Tool Bit3x3x75mm, Hss Tool Bit 4X4x75mm Made Out, Hss Tool Bit 5X5x75mm Made Out, Hss Tool Bit 8X8x75mm Made Out, Hss Tool Bit 10X10x75mm, Hss Tool Bit 10X10. Submission Date for this Tender is 20-07-2022. Cutting Crimping and Punching Tools Tenders in Karnataka. Bidders can get complete Tender details and download the document.




    Tender Notice

    32877827
    Consolidated Procurement Of Tools For Rtps , Hacksaw Blade 12, 30 X 3.5 Pitch Hss Tap Sets, Hss Tool Bit3x3x75mm, Hss Tool Bit 4X4x75mm Made Out, Hss Tool Bit 5X5x75mm Made Out, Hss Tool Bit 8X8x75mm Made Out, Hss Tool Bit 10X10x75mm, Hss Tool Bit 10X10
    Open Tender
    Indian
    Karnataka
    20-07-2022

    Tender Details

    Consolidated Procurement Of Tools For Rtps , Hacksaw Blade 12, 30 X 3.5 Pitch Hss Tap Sets, Hss Tool Bit3x3x75mm, Hss Tool Bit 4X4x75mm Made Out, Hss Tool Bit 5X5x75mm Made Out, Hss Tool Bit 8X8x75mm Made Out, Hss Tool Bit 10X10x75mm, Hss Tool Bit 10X10x150mm, Hss Tool Bit 12X12x150mm, Hss Tool Bit 16X16x150, Hss Tool Bit 20X20x150mm, Hss Tool Bit 20X20x200, Hss Tool Bit 25X25x200mm Made, Hss Tool Bit Dia.4X75mm, Hss Tool Bit Dia.5X75mm Made O, Hss Tool Bit Dia.6X75mm Made O, Hss Tool Bit Dia.8X100mm, Hss Tool Bit Dia.10X100mm, Hss Tool Bit Dia.10X75mm, Hss Drill 0.5 Mm Dia St. Shank, Hss Drill Of Dia 2.00 Mm, Hss Drill Bit Of Dia 2.20 Mm, Hss Drill Bit Of Dia 2.40Mm, Hss Drill Bit Of Dia 2.50Mm, Hss Drill Bit Of Dia 2.80Mm, Hss Drillbit Of Dia 3.00Mm, Hss Drillbit Of Dia 3.20Mm, Hss Drillbit Of Dia 3.50Mm, Hss Drillbit Of Dia 3.80Mm, Hss Drillbit Of Dia 4.00Mm, Hss Drillbit Of Dia 4.50Mm, Hss Drillbit Of Dia 4.80Mm, Hss Drillbit Of Dia 5.00Mm, Hss Drillbit Of Dia 5.50Mm, Hss Drillbit Of Dia 5.80Mm, Hss Drill Bit Of Dia 6.0Mm, Hss Drill Bit Of Dia.6.50Mm, Hss Drill Bit Of Dia.6.80Mm, Hss Drill Bit Of Dia.7.00Mm, Hss Drill Bit Of Dia.7.50Mm, Hss Drill Bit Of Dia.8.00Mm, Hss Drill Bit Of Dia.8.20Mm, Hss Drill Bit Of Dia.8.50Mm, Hss Drill Bit Of Dia.8.70Mm, Hss Drill Bit Of Dia.9.00Mm, Hss Drill Bit Of Dia.9.50Mm, Hss Drill Bit Of Dia.9.70Mm, Hss Drill Bit Of Dia.10.00Mm, Hss Drill Bit Of Dia.10.25Mm, Hss Drill Bit Of Dia.11.20Mm, Hss Drill Bit Of Dia.11.50Mm, Hss Drill Bit Of Dia.11.80Mm, Hss Drill Bit Of Dia.12.50Mm, Hss Drill Bit Of Dia.12.70Mm, Hss Drill Bit Of Dia.13.00Mm, Hss Drill Bit Of Dia.13.50Mm, Hss Drill Bit Of Dia.14.00Mm, Hss Drill Bit Of Dia.14.50Mm, Hss Drill Bit Of Dia.15.50Mm, Stub Drill Bit 1 / 8, Solid State Carbide Drill3.2, Drill Bits Of Sizes:8Mm, Drill Bits Of Sizes:10Mm, Hss Ts Drill Bit Of Dia.16.00M, Hss Ts Drill Bit Of Dia.16.25M, Hss Ts Drill Bit Of Dia.17.50M, Hss Ts Drill Bit Of Dia.18.50M, Hss Ts Drill Bit Of Dia.19.50M, Taper Shank Drill Bits 18Mm, Hss Ts Drill Bit Of Dia.20.50M, Hss Ts Drill Bit Of Dia.21.00M, Hss Ts Drill Bit Of Dia.21.50M, Hss Ts Dril Bit Of Dia.22.00Mm, Hss Ts Dril Bit Of Dia.22.50Mm, Hss Ts Drill Bit Of Dia.23.00M, Hss Ts Drill Bit Of Dia.23.50M, Hss Ts Drill Bit Of Dia.24.50M, Hss Ts Drill Bit Of Dia.25.00M, Drill Bit Tapershank 28Mm, Hss Ts Drill Bit Of Dia.26.50M, Drill Bit Taper Shank 32Mm, Hss Ts Drill Bit Of Dia.28.00M, Hss Ts Drill Bit Of Dia.28.50M, Hss Ts Drill Bit Of Dia.29.50M, Hss Ts Drill Bit Of Dia.30.00M, Hss Ts Drill Bit Of Dia.32.00M, Hss Ts Drill Bit Of Dia.33.00M, Hss Ts Drill Bit Of Dia.34.00M, Hss Ts Drill Bit Of Dia.35.00M, Hss Ts Drill Bit Of Dia.36.00M, Hss Ts Drill Bit Of Dia.37.00M, Hss Ts Drill Bit Of Dia.38.00M, Hss Ts Drill Bit Of Dia.39.00M, Hss Ts Drill Bit Of Dia.40.00M, Hss Ts Drill Bit Of Dia.41.00M, Hss Ts Drill Bit Of Dia.43.00M, Hss Ts Drill Bit Of Dia.44.00M, Hss Ts Drill Bit Of Dia.45.00M, Hss Ts Drill Bit Of Dia.46.00M, Hss Ts Drill Bit Of Dia.47.00M, Hss Ts Drill Bit Of Dia.48.00M, Hss Ts Drill Bit Of Dia.49.00M, Hss Ts Drill Bit Of Dia.50.00M, Hss Ts Drill Bit Of Dia.52.00M, Hss Ts Drill Bit Of Dia.54.00M, Carbide Drill 3Mm Stright Shan, Carbide St Shank Drill 4Mm, Carbide St Shank Drill 5Mm, Carbide St Shank Drill 6Mm, Carbide St Shank Drill 12 Mm, Hss Ts Drill Bit Of Dia.17.00M, Hss Ts Drill Bit Of Dia.18.00M, Hss Ts Drill Bit Of Dia.19.00M, Hss Ts Drill Bit Of Dia.21.75M, Hss Ts Drill Bit Of Dia.24.00M, Hss Ts Drill Bit Of Dia.25.50M, Hss Ts Drill Bit Of Dia.25.75M, Hss Ts Drill Bit Of Dia.26.00M, Hss Ts Drill Bit Of Dia.27.00M, Hss Ts Drill Bit Of Dia.27.50M, Hss Ts Drill Bit Of Dia 31.00M, Hss Ts Drill Bit Of Dia.31.75M, Hss Ts Drill Bit Of Dia.32.50M, Hss Ts Drill Bit Of Dia.33.50M, Hss Ts Drill Bit Of Dia.34.50M, Hss Ts Drill Bit Of Dia.35.50M, Hss Ts Drill Bit Of Dia.36.50M, Hss Ts Drill Bit Of Dia.37.50M, Hss Ts Drill Bit Of Dia.38.50M, Hss Ts Drill Bit Of Dia.39.50M, Hss Ts Drill Bit Of Dia.42.50M, Hss Ts Drill Bit Of Dia.43.50M, Hss Ts Drill Bit Of Dia.44.50M, Hss Ts Drill Bit Of Dia.45.50M, Hss Ts Drill Bit Of Dia.46.50M, Hss Ts Drill Bit Of Dia.48.50M, St, Shank Extralong Drill 8X250, Hss St.Shank Long Drill 10X200, 3Mm Hss Drill Bit, Hss Ts Drill Bit Of Dia.56.00M, Hss Ts Drill Bit Of Dia.58.00M, Hss Ts Drill Bit Of Dia.60.00M, Hss Ts Drill Bit Of Dia.62.00M, Hss Long Series Ts Twist Drill, Long Series Ts Twist Drill 30, Long Series Ts Twist Drill35, Long Series Ts Twist Drill 40, Long Series Ts Twist Drill 45, Long Series Ts Twist Drill 50, Hss Parallel Shankdrill 10.2Mm, Hss Taper Shanktwist Drill 21., Solidcarbide Drill Dia 5.00Mm, Solidcarbide Drill Dia 6.00Mm, Solid Carbide Drill 6.50 Dia, Solidcarbide Drill 8.00 Dia, Solidcarbide Drill 8.50Mm Dia, Solidcarbide Drill 10.00Mm Dia, Solidcarbide Drill 10.25Mm Dia, Solidcarbide Drill 10.50Mm Dia, Solidcarbide Drill 12.00Mm Dia, Solidcarbide Drill 14.00Mm Dia, Solidcarbide Drill 16.00Mm Dia, Solidcarbide Drill 18.00Mm Dia, Solidcarbide Drill 20.00Mm Dia, Solidcarbide Drill 22.00Mm Dia, Solidcarbide Drill24.00Mm Dia, Solidcarbide Drill 25.00Mm Dia, Solidcarbide Drill 26.00Mm Dia, Solidcarbide Drill 28.00Mm Dia, Solidcarbide Drill 30.00Mm Dia, Hss M / C Reamer Of Dia 24 Mm, Hss Reamer Of Dia 25 Mm, Hss M / C Reamer Of Dia 27 Mm, Hss M / C Reamer Of Dia 28 Mm, Hss M / C Reamer Of Dia 30 Mm, Hss M / C Reamer Of Dia 32Mm, Hss M / C Reamer Of Dia 34Mm, Hss M / C Reamer Of Dia 35Mm, Hss M / C Reamer Of Dia 38Mm, Hss M / C Reamer Of Dia 8Mm, Hss M / C Reamer Of Dia 10 Mm, Hss M / C Reamer Of Dia 12 Mm, Hss M / C Reamer Of Dia 14 Mm, Hss M / C Reamer Of Dia 16 Mm, Hss M / C Reamer Of Dia 18 Mm, Hss M / C Reamer Of Dia 20 Mm, Hss M / C Reamer Of Dia 22 Mm, Hss Machine Reamer Dia-4.00Mm, Hss Machine Reamer Dia.6.00Mm, Hss Machine Reamer Dia.8.00Mm, Hss Machine Reamer Dia.10.00Mm, Drill Bits 2-13Mm, Solid State Carbide Drill 2.0, Solid State Carbide Drill 2.5, Solid St Carbide Drill 3.2Mm, Solid State Carbide Drill 6.5, M39x3mm Pitch Hss Hand Tap Set, Hss Tap Set M20, 36 X 4.0 Pitch Hss Tap Sets, 42 X 4.5 Pitch Hss Tap Sets, 48 X 5.0 Pitch Hss Tap Sets, 52 X 5.0 Pitch Hss Tap Sets, Hss Hand Tap M18x1.5, Tap Set M24 X 1.5 Pitch, Hss Precision M-36 X 3 Mm Tap, Hss Ground Tap Set 3 / 8 Fine, 3 / 4Bsf Hss Fine Tap Set, 48 X 1.5 Pitch Hss Tap Sets., Hand Tap Sets M36 X 1.5 Mm, Hss Taps 10Mm, Hss Tap 12Mm, Hss Hand Tap M6x1 Pitch., Hss Hand Taps M8x1.25 Pitch, Hss Hand Tap M 10X1.5 Pitch, Hss Hand Tap M12x1. 75, Hss Hand Tap M14 X2 Pitch, Hss Hand Tap M16x2 Pitch, Hss 1 / 8 Bsw Hand Tap Set, Hss 1 / 4Bsw Hand Tap Set, Hss 3 / 8 Bsw Hand Tap Set, Hss 1 / 2 Bsw Hand Tap Set, Hss 5 / 8Th Bsw Hand Tap Set, Hss 3 / 4Th Bsw Hand Tap Set, Hss 7 / 8Th Bsw Hand Tap Set, Hss 1 Bsw Hand Tap Set, Hss Fine Pitch Tap M8x1.00Mm, Hss Fine Pitch Tap M10x1.00Mm, Hss Fine Pitch Tap M10x1.25Mm, Hss Fine Pitch Tap M12x1.00Mm, Hss Fine Pitch Tap M12x1.50, Hss Fine Pitch Tap M14x1.50Mm, Hss Fine Pitch Tap M16x1.50Mm, Hss Fine Pitch Tap M20x1.50Mm, Hss Fine Pitch Tap M24x1.50Mm, Hss Fine Pitch Tap M24x2.00Mm, Hss M-20 X 2.5Mm Machine Tap, Hss Machine Tap M-27X3, Hss Cobaltgrade M-4 Serialtap, Hss Hand Tap Of Size ;M30, Hss Hand Tap Of Size M33x1.5Mm, M 36 X 4.0 Pitch, Hss Cobalt Grade M-6 Tap Set, Hss Cobalt Grade M-8 Tap Set, Hss Cobalt Grade M-10 Tap Set, Hss Cobalt Grade M-12 Tap Set, Hss Cobalt Grade M-14 Tap Set, Hss Cobalt Grade M-16 Tap Set, Hss Cobalt Grade M-18 Tap Set, Hss Cobalt Grade M-20 Tap Set, Hss Cobalt Grade M-22 Tap Set, Hss Cobalt Grade M-24 Tap Set, Hss Cobalt Grade M-27 Tap Set, Hss Cobalt Grade M-30 Tap Set, Hss Cobalt Grade M-33 Tap Set, Hss Endmill Of Dia 3Mm, Hss Endmills Of Dia 4Mm, Hss End Mill Dia 5 Mm, Hss End Mills Size: 6.00Mm, Hss End Mills Size: 8.00Mm Dia, Hss Endmills Of Dia 10 Mm, Hss Endmills Of Dia 12 Mm, Hss Endmills Of Dia 14 Mm, Hss Paralel Sk.End Mill 16Mm, Hss Endmills Of Dia 18 Mm, Hss Endmill Size:20.0Mm, Hss End Mill 25.00Mm, Hss Endmill Of Dia 24Mm, Hss Endmills Of Dia 30 Mm, Hss Endmills Of Dia 32 Mm, Hss Endmills Of Dia 22 Mm, Hss Endmill Of Dia 40 Mm, Hand Hacksaw Frame, Hand Hacksaw Frame, Hacksaw Blade 1 / 2, Hss Hack Saw - 1 / 2 X 12, 300 X 12.5 X.63 X 24 Tpi Hss W, Hss Hand Saw Blade, Hacksaw Frame - 12, Hacksaw Frame 12 Flat, Hacksaw Blade & Frame, Hss Power Hacksaw Blade-400X32, Hss Power Hacksaw Blade-800X50, 400X32x1.6X10tpi Hss Pr Hk Saw, Solidcarbideendmill Of Dia 5Mm, Solid Carbide Endmill Ofdia6mm, Solid Carbide Endmill Ofdia8mm, Solid Carbid Endmill Ofdia10mm, Solid Carbide Endmill Of Dia12, Hss Hacksaw Blades, Hand Hack Saw Frame 12 Adj, Flat Files ( Rough ) -1X12, Flat File Smooth 30Mm X 310Mm, File Set, Diamond Needle File Set, Flat File Rough 6, Flat File- Rough 12, Flat Medium Rough File 12 Inch, Files Flat Smooth 12, Round File-Rough-8 Inches, Round File Rough 12, Round File Smooth 12, Round File Smooth 12, Half Round Rough 12 File, Half Round Med. Rough File12, Half Round File 12 Smooth, Hole Punch Set 3-22Mm, Hole Punch 6Mm To 32 Mm, Hole Punch 35Mm, Hole Punch 30Mm, Centre Punch 6, Flat Chisel 200X25mm, Chisel 10Mm, 15 Mm Chisel, Chisels 1 1 / 4 Hex X 6 X 18, Insert Socket 60 Mm, Twist Drills, 3Mm, Twist Drills, 6Mm, 100Mm Cutting Wheel, Tc Rotary Burr Cutter R 3, Tc Rotary Burr Cutter A 1, Ball Nose Cyl Rotary Burr, Conical Shape Rotary Burr A3, Conical Shape Radi End Burr K2, Cylindrical Rotary Burr-C8& B6, Bosch Cutting Wheel 100Mm, Tungstan Carbide Rotary Cutter, Tungstan Carbide Rotary Cutter, Flat File With Handle 8, Hss Hack Saw Blade Size 1 / 2, Round File With Handles 8

    Key Value

    Document Fees
    INR 550 /-
    EMD
    INR 33365.0 /-
    Tender Value
    Refer document

    BOQ Items

    Sl. No. Item Name
    1HACKSAW BLADE 12"
    230 X 3.5 PITCH HSS TAP SETS
    3HSS TOOL BIT3X3X75MM
    4HSS TOOL BIT 4X4X75MM MADE OUT
    5HSS TOOL BIT 5X5X75MM MADE OUT
    6HSS TOOL BIT 8X8X75MM MADE OUT
    7HSS TOOL BIT 10X10X75MM
    8HSS TOOL BIT 10X10X150MM
    9HSS TOOL BIT 12X12X150MM
    10HSS TOOL BIT 16X16X150
    11HSS TOOL BIT 20X20X150MM
    12HSS TOOL BIT 20X20X200
    13HSS TOOL BIT 25X25X200MM MADE
    14HSS TOOL BIT DIA.4X75MM
    15HSS TOOL BIT DIA.5X75MM MADE O
    16HSS TOOL BIT DIA.6X75MM MADE O
    17HSS TOOL BIT DIA.8X100MM
    18HSS TOOL BIT DIA.10X100MM
    19HSS TOOL BIT DIA.10X75MM
    20HSS DRILL 0.5 MM DIA ST. SHANK
    21HSS DRILL OF DIA 2.00 MM
    22HSS DRILL BIT OF DIA 2.20 MM
    23HSS DRILL BIT OF DIA 2.40MM
    24HSS DRILL BIT OF DIA 2.50MM
    25HSS DRILL BIT OF DIA 2.80MM
    26HSS DRILLBIT OF DIA 3.00MM
    27HSS DRILLBIT OF DIA 3.20MM
    28HSS DRILLBIT OF DIA 3.50MM
    29HSS DRILLBIT OF DIA 3.80MM
    30HSS DRILLBIT OF DIA 4.00MM
    31HSS DRILLBIT OF DIA 4.50MM
    32HSS DRILLBIT OF DIA 4.80MM
    33HSS DRILLBIT OF DIA 5.00MM
    34HSS DRILLBIT OF DIA 5.50MM
    35HSS DRILLBIT OF DIA 5.80MM
    36HSS DRILL BIT OF DIA 6.0MM
    37HSS DRILL BIT OF DIA.6.50MM
    38HSS DRILL BIT OF DIA.6.80MM
    39HSS DRILL BIT OF DIA.7.00MM
    40HSS DRILL BIT OF DIA.7.50MM
    41HSS DRILL BIT OF DIA.8.00MM
    42HSS DRILL BIT OF DIA.8.20MM
    43HSS DRILL BIT OF DIA.8.50MM
    44HSS DRILL BIT OF DIA.8.70MM
    45HSS DRILL BIT OF DIA.9.00MM
    46HSS DRILL BIT OF DIA.9.50MM
    47HSS DRILL BIT OF DIA.9.70MM
    48HSS DRILL BIT OF DIA.10.00MM
    49HSS DRILL BIT OF DIA.10.25MM
    50HSS DRILL BIT OF DIA.11.20MM
    51HSS DRILL BIT OF DIA.11.50MM
    52HSS DRILL BIT OF DIA.11.80MM
    53HSS DRILL BIT OF DIA.12.50MM
    54HSS DRILL BIT OF DIA.12.70MM
    55HSS DRILL BIT OF DIA.13.00MM
    56HSS DRILL BIT OF DIA.13.50MM
    57HSS DRILL BIT OF DIA.14.00MM
    58HSS DRILL BIT OF DIA.14.50MM
    59HSS DRILL BIT OF DIA.15.50MM
    60STUB DRILL BIT 1/8"
    61SOLID STATE CARBIDE DRILL3.2
    62DRILL BITS OF SIZES:8MM
    63DRILL BITS OF SIZES:10MM
    64HSS TS DRILL BIT OF DIA.16.00M
    65HSS TS DRILL BIT OF DIA.16.25M
    66HSS TS DRILL BIT OF DIA.17.50M
    67HSS TS DRILL BIT OF DIA.18.50M
    68HSS TS DRILL BIT OF DIA.19.50M
    69TAPER SHANK DRILL BITS 18MM
    70HSS TS DRILL BIT OF DIA.20.50M
    71HSS TS DRILL BIT OF DIA.21.00M
    72HSS TS DRILL BIT OF DIA.21.50M
    73HSS TS DRIL BIT OF DIA.22.00MM
    74HSS TS DRIL BIT OF DIA.22.50MM
    75HSS TS DRILL BIT OF DIA.23.00M
    76HSS TS DRILL BIT OF DIA.23.50M
    77HSS TS DRILL BIT OF DIA.24.50M
    78HSS TS DRILL BIT OF DIA.25.00M
    79DRILL BIT TAPERSHANK 28MM
    80HSS TS DRILL BIT OF DIA.26.50M
    81DRILL BIT TAPER SHANK 32MM
    82HSS TS DRILL BIT OF DIA.28.00M
    83HSS TS DRILL BIT OF DIA.28.50M
    84HSS TS DRILL BIT OF DIA.29.50M
    85HSS TS DRILL BIT OF DIA.30.00M
    86HSS TS DRILL BIT OF DIA.32.00M
    87HSS TS DRILL BIT OF DIA.33.00M
    88HSS TS DRILL BIT OF DIA.34.00M
    89HSS TS DRILL BIT OF DIA.35.00M
    90HSS TS DRILL BIT OF DIA.36.00M
    91HSS TS DRILL BIT OF DIA.37.00M
    92HSS TS DRILL BIT OF DIA.38.00M
    93HSS TS DRILL BIT OF DIA.39.00M
    94HSS TS DRILL BIT OF DIA.40.00M
    95HSS TS DRILL BIT OF DIA.41.00M
    96HSS TS DRILL BIT OF DIA.43.00M
    97HSS TS DRILL BIT OF DIA.44.00M
    98HSS TS DRILL BIT OF DIA.45.00M
    99HSS TS DRILL BIT OF DIA.46.00M
    100HSS TS DRILL BIT OF DIA.47.00M
    101HSS TS DRILL BIT OF DIA.48.00M
    102HSS TS DRILL BIT OF DIA.49.00M
    103HSS TS DRILL BIT OF DIA.50.00M
    104HSS TS DRILL BIT OF DIA.52.00M
    105HSS TS DRILL BIT OF DIA.54.00M
    106CARBIDE DRILL 3MM STRIGHT SHAN
    107CARBIDE ST SHANK DRILL 4MM
    108CARBIDE ST SHANK DRILL 5MM
    109CARBIDE ST SHANK DRILL 6MM
    110CARBIDE ST SHANK DRILL 12 MM
    111HSS TS DRILL BIT OF DIA.17.00M
    112HSS TS DRILL BIT OF DIA.18.00M
    113HSS TS DRILL BIT OF DIA.19.00M
    114HSS TS DRILL BIT OF DIA.21.75M
    115HSS TS DRILL BIT OF DIA.24.00M
    116HSS TS DRILL BIT OF DIA.25.50M
    117HSS TS DRILL BIT OF DIA.25.75M
    118HSS TS DRILL BIT OF DIA.26.00M
    119HSS TS DRILL BIT OF DIA.27.00M
    120HSS TS DRILL BIT OF DIA.27.50M
    121HSS TS DRILL BIT OF DIA 31.00M
    122HSS TS DRILL BIT OF DIA.31.75M
    123HSS TS DRILL BIT OF DIA.32.50M
    124HSS TS DRILL BIT OF DIA.33.50M
    125HSS TS DRILL BIT OF DIA.34.50M
    126HSS TS DRILL BIT OF DIA.35.50M
    127HSS TS DRILL BIT OF DIA.36.50M
    128HSS TS DRILL BIT OF DIA.37.50M
    129HSS TS DRILL BIT OF DIA.38.50M
    130HSS TS DRILL BIT OF DIA.39.50M
    131HSS TS DRILL BIT OF DIA.42.50M
    132HSS TS DRILL BIT OF DIA.43.50M
    133HSS TS DRILL BIT OF DIA.44.50M
    134HSS TS DRILL BIT OF DIA.45.50M
    135HSS TS DRILL BIT OF DIA.46.50M
    136HSS TS DRILL BIT OF DIA.48.50M
    137ST,SHANK EXTRALONG DRILL 8X250
    138HSS ST.SHANK LONG DRILL 10X200
    1393MM HSS DRILL BIT
    140HSS TS DRILL BIT OF DIA.56.00M
    141HSS TS DRILL BIT OF DIA.58.00M
    142HSS TS DRILL BIT OF DIA.60.00M
    143HSS TS DRILL BIT OF DIA.62.00M
    144HSS LONG SERIES TS TWIST DRILL
    145LONG SERIES TS TWIST DRILL 30
    146LONG SERIES TS TWIST DRILL35
    147LONG SERIES TS TWIST DRILL 40
    148LONG SERIES TS TWIST DRILL 45
    149LONG SERIES TS TWIST DRILL 50
    150HSS PARALLEL SHANKDRILL 10.2MM
    151HSS TAPER SHANKTWIST DRILL 21.
    152SOLIDCARBIDE DRILL DIA 5.00MM
    153SOLIDCARBIDE DRILL DIA 6.00MM
    154SOLID CARBIDE DRILL 6.50 DIA
    155SOLIDCARBIDE DRILL 8.00 DIA
    156SOLIDCARBIDE DRILL 8.50MM DIA
    157SOLIDCARBIDE DRILL 10.00MM DIA
    158SOLIDCARBIDE DRILL 10.25MM DIA
    159SOLIDCARBIDE DRILL 10.50MM DIA
    160SOLIDCARBIDE DRILL 12.00MM DIA
    161SOLIDCARBIDE DRILL 14.00MM DIA
    162SOLIDCARBIDE DRILL 16.00MM DIA
    163SOLIDCARBIDE DRILL 18.00MM DIA
    164SOLIDCARBIDE DRILL 20.00MM DIA
    165SOLIDCARBIDE DRILL 22.00MM DIA
    166SOLIDCARBIDE DRILL24.00MM DIA
    167SOLIDCARBIDE DRILL 25.00MM DIA
    168SOLIDCARBIDE DRILL 26.00MM DIA
    169SOLIDCARBIDE DRILL 28.00MM DIA
    170SOLIDCARBIDE DRILL 30.00MM DIA
    171HSS M/C REAMER OF DIA 24 MM
    172HSS REAMER OF DIA 25 MM
    173HSS M/C REAMER OF DIA 27 MM
    174HSS M/C REAMER OF DIA 28 MM
    175HSS M/C REAMER OF DIA 30 MM
    176HSS M/C REAMER OF DIA 32MM
    177HSS M/C REAMER OF DIA 34MM
    178HSS M/C REAMER OF DIA 35MM
    179HSS M/C REAMER OF DIA 38MM
    180HSS M/C REAMER OF DIA 8MM
    181HSS M/C REAMER OF DIA 10 MM
    182HSS M/C REAMER OF DIA 12 MM
    183HSS M/C REAMER OF DIA 14 MM
    184HSS M/C REAMER OF DIA 16 MM
    185HSS M/C REAMER OF DIA 18 MM
    186HSS M/C REAMER OF DIA 20 MM
    187HSS M/C REAMER OF DIA 22 MM
    188HSS MACHINE REAMER DIA-4.00MM
    189HSS MACHINE REAMER DIA.6.00MM
    190HSS MACHINE REAMER DIA.8.00MM
    191HSS MACHINE REAMER DIA.10.00MM
    192DRILL BITS 2-13MM
    193SOLID STATE CARBIDE DRILL 2.0
    194SOLID STATE CARBIDE DRILL 2.5
    195SOLID ST CARBIDE DRILL 3.2MM
    196SOLID STATE CARBIDE DRILL 6.5
    197M39X3MM PITCH HSS HAND TAP SET
    198HSS TAP SET M20
    19936 X 4.0 PITCH HSS TAP SETS
    20042 X 4.5 PITCH HSS TAP SETS
    20148 X 5.0 PITCH HSS TAP SETS
    20252 X 5.0 PITCH HSS TAP SETS
    203HSS HAND TAP M18X1.5
    204TAP SET M24 X 1.5 PITCH
    205HSS PRECISION M-36 X 3 MM TAP
    206HSS GROUND TAP SET 3/8" FINE
    2073/4"BSF HSS FINE TAP SET
    20848 X 1.5 PITCH HSS TAP SETS.
    209HAND TAP SETS M36 X 1.5 MM
    210HSS TAPS 10MM
    211HSS TAP 12MM
    212HSS HAND TAP M6X1 PITCH.
    213HSS HAND TAPS M8X1.25 PITCH
    214HSS HAND TAP M 10X1.5 PITCH
    215HSS HAND TAP M12X1. 75
    216HSS HAND TAP M14 X2 PITCH
    217HSS HAND TAP M16X2 PITCH
    218HSS 1/8" BSW HAND TAP SET
    219HSS 1/4"BSW HAND TAP SET
    220HSS 3/8" BSW HAND TAP SET
    221HSS 1/2" BSW HAND TAP SET
    222HSS 5/8TH" BSW HAND TAP SET
    223HSS 3/4TH" BSW HAND TAP SET
    224HSS 7/8TH" BSW HAND TAP SET
    225HSS 1" BSW HAND TAP SET
    226HSS FINE PITCH TAP M8X1.00MM
    227HSS FINE PITCH TAP M10X1.00MM
    228HSS FINE PITCH TAP M10X1.25MM
    229HSS FINE PITCH TAP M12X1.00MM
    230HSS FINE PITCH TAP M12X1.50
    231HSS FINE PITCH TAP M14X1.50MM
    232HSS FINE PITCH TAP M16X1.50MM
    233HSS FINE PITCH TAP M20X1.50MM
    234HSS FINE PITCH TAP M24X1.50MM
    235HSS FINE PITCH TAP M24X2.00MM
    236HSS M-20 X 2.5MM MACHINE TAP
    237HSS MACHINE TAP M-27X3
    238HSS COBALTGRADE M-4 SERIALTAP
    239HSS HAND TAP OF SIZE ;M30
    240HSS HAND TAP OF SIZE M33X1.5MM
    241M 36 X 4.0 PITCH
    242HSS COBALT GRADE M-6 TAP SET
    243HSS COBALT GRADE M-8 TAP SET
    244HSS COBALT GRADE M-10 TAP SET
    245HSS COBALT GRADE M-12 TAP SET
    246HSS COBALT GRADE M-14 TAP SET
    247HSS COBALT GRADE M-16 TAP SET
    248HSS COBALT GRADE M-18 TAP SET
    249HSS COBALT GRADE M-20 TAP SET
    250HSS COBALT GRADE M-22 TAP SET
    251HSS COBALT GRADE M-24 TAP SET
    252HSS COBALT GRADE M-27 TAP SET
    253HSS COBALT GRADE M-30 TAP SET
    254HSS COBALT GRADE M-33 TAP SET
    255HSS ENDMILL OF DIA 3MM
    256HSS ENDMILLS OF DIA 4MM
    257HSS END MILL DIA 5 MM
    258HSS END MILLS SIZE: 6.00MM
    259HSS END MILLS SIZE: 8.00MM DIA
    260HSS ENDMILLS OF DIA 10 MM
    261HSS ENDMILLS OF DIA 12 MM
    262HSS ENDMILLS OF DIA 14 MM
    263HSS PARALEL SK.END MILL 16MM
    264HSS ENDMILLS OF DIA 18 MM
    265HSS ENDMILL SIZE:20.0MM
    266HSS END MILL 25.00MM
    267HSS ENDMILL OF DIA 24MM
    268HSS ENDMILLS OF DIA 30 MM
    269HSS ENDMILLS OF DIA 32 MM
    270HSS ENDMILLS OF DIA 22 MM
    271HSS ENDMILL OF DIA 40 MM
    272HAND HACKSAW FRAME
    273HAND HACKSAW FRAME
    274HACKSAW BLADE 1/2"
    275HSS HACK SAW - 1/2" X 12"
    276300 X 12.5 X.63 X 24 TPI HSS W
    277HSS HAND SAW BLADE
    278HACKSAW FRAME - 12"
    279HACKSAW FRAME 12" FLAT
    280HACKSAW BLADE & FRAME
    281HSS POWER HACKSAW BLADE-400X32
    282HSS POWER HACKSAW BLADE-800X50
    283400X32X1.6X10TPI HSS PR HK SAW
    284SOLIDCARBIDEENDMILL OF DIA 5MM
    285SOLID CARBIDE ENDMILL OFDIA6MM
    286SOLID CARBIDE ENDMILL OFDIA8MM
    287SOLID CARBID ENDMILL OFDIA10MM
    288SOLID CARBIDE ENDMILL OF DIA12
    289HSS HACKSAW BLADES
    290HAND HACK SAW FRAME 12" ADJ
    291FLAT FILES (ROUGH)-1"X12"
    292FLAT FILE SMOOTH 30MM X 310MM
    293FILE SET
    294DIAMOND NEEDLE FILE SET
    295FLAT FILE ROUGH 6"
    296FLAT FILE- ROUGH 12"
    297FLAT MEDIUM ROUGH FILE 12 INCH
    298FILES FLAT SMOOTH 12"
    299ROUND FILE-ROUGH-8 INCHES
    300ROUND FILE ROUGH 12"
    301ROUND FILE SMOOTH 12"
    302ROUND FILE SMOOTH 12"
    303HALF ROUND ROUGH 12" FILE
    304HALF ROUND MED. ROUGH FILE12"
    305HALF ROUND FILE 12" SMOOTH
    306HOLE PUNCH SET 3-22MM
    307HOLE PUNCH 6MM TO 32 MM
    308HOLE PUNCH 35MM
    309HOLE PUNCH 30MM
    310CENTRE PUNCH 6"
    311FLAT CHISEL 200X25MM
    312CHISEL 10MM
    31315 MM CHISEL
    314CHISELS 1 1/4 HEX X 6" X 18
    315INSERT SOCKET 60 MM
    316TWIST DRILLS, 3MM
    317TWIST DRILLS, 6MM
    318100MM CUTTING WHEEL
    319TC ROTARY BURR CUTTER R 3
    320TC ROTARY BURR CUTTER A 1
    321BALL NOSE CYL ROTARY BURR
    322CONICAL SHAPE ROTARY BURR A3
    323CONICAL SHAPE RADI END BURR K2
    324CYLINDRICAL ROTARY BURR-C8& B6
    325BOSCH CUTTING WHEEL 100MM
    326TUNGSTAN CARBIDE ROTARY CUTTER
    327TUNGSTAN CARBIDE ROTARY CUTTER
    328FLAT FILE WITH HANDLE 8"
    329HSS HACK SAW BLADE SIZE 1/2
    330ROUND FILE WITH HANDLES 8"
    Disclaimer :
    We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
    Tell us about your Product / Services,
    We will Find Tenders for you
    Cnet Technologies

    We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.

    About Us

    Services

    Browse Tenders

    For Sales Inquiry

    Connect With Us

    Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

    For Tender Information Services Visit : TenderDetail